simplify cmake

2025-04-04 17:00:11 -05:00 · 2022-07-16 20:01:11 +02:00 · 2022-07-16 20:01:11 +02:00 · 6a873c3a49
commit 6a873c3a49
parent a892c50147
6 changed files with 53 additions and 184 deletions
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@ -12,39 +12,66 @@ set(PACKAGE_BUGREPORT "Michal.Trojnara@stunnel.org")
 set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)

-# make find modules in cmake dir available
-set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${PROJECT_SOURCE_DIR}/cmake")
+# load CMake library modules
+include(FindOpenSSL)
+include(FindCURL)

 # load CMake project modules
-include(SetOptions)
-include(FindOpenssl)
-include(FindCurl)
+set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${PROJECT_SOURCE_DIR}/cmake")
 include(FindMapping)

-# use config.h
-target_compile_definitions(osslsigncode PRIVATE HAVE_CONFIG_H=1)
+# define the target
+add_executable(osslsigncode)
+
+# create and use config.h
 configure_file(Config.h.in config.h)
+target_compile_definitions(osslsigncode PRIVATE HAVE_CONFIG_H=1)

-# add include directories to osslsigncode
-target_include_directories(osslsigncode PUBLIC "${PROJECT_BINARY_DIR}")
+# set sources
+target_sources(osslsigncode PRIVATE osslsigncode.c msi.c)
+if(WIN32)
+target_sources(osslsigncode PRIVATE ${OPENSSL_INCLUDE_DIRS}/applink.c)
+endif(WIN32)

-if(MSVC)
+# set include directories
+target_include_directories(osslsigncode PRIVATE "${PROJECT_BINARY_DIR}")
+
+# set OpenSSL includes/libraries
+if(NOT OPENSSL_FOUND)
+  message(FATAL_ERROR "OpenSSL library not found")
+endif(NOT OPENSSL_FOUND)
+target_include_directories(osslsigncode PRIVATE ${OPENSSL_INCLUDE_DIRS})
+target_link_libraries(osslsigncode PRIVATE ${OPENSSL_LIBRARIES})
+
+# set cURL includes/libraries
+if(CURL_FOUND)
+  target_compile_definitions(osslsigncode PRIVATE ENABLE_CURL=1)
+  target_include_directories(osslsigncode PRIVATE ${CURL_INCLUDE_DIRS})
+  target_link_libraries(osslsigncode PRIVATE ${CURL_LIBRARIES})
+  message(NOTICE "cURL support enabled")
+else(CURL_FOUND)
+  message(WARNING "cURL support disabled (library not found)")
+endif(CURL_FOUND)
+
+if(WIN32)
  # set output directory
  set_target_properties(osslsigncode PROPERTIES
    RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PROJECT_BINARY_DIR}
    RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PROJECT_BINARY_DIR}
  )
-  # copy necessary libraries
-  file(COPY ${OPENSSL_LIBS} ${CURL_LIB} DESTINATION ${PROJECT_BINARY_DIR})
-else()
+  # copy the libraries
+  file(COPY ${OPENSSL_LIBRARIES} ${CURL_LIBRARIES} DESTINATION ${PROJECT_BINARY_DIR})
+else(WIN32)
  # set LD_LIBRARY_PATH
  set_target_properties(osslsigncode PROPERTIES
    INSTALL_RPATH_USE_LINK_PATH TRUE
  )
-endif()
+endif(WIN32)

 include(CMakeTest)
+
 include(CMakeInstall)
-if(NOT MSVC)
+
+if(NOT WIN32)
  include(CMakeDist)
-endif()
+endif(NOT WIN32)
--- a/INSTALL.W32.md
+++ b/INSTALL.W32.md
@ -12,7 +12,7 @@
 2) Run "MSYS2 MinGW 64-bit" and build 64-bit Windows executables.
 ```
  cd osslsigncode-folder
-  x86_64-w64-mingw32-gcc osslsigncode.c msi.c msi.h -o osslsigncode.exe \
+  x86_64-w64-mingw32-gcc osslsigncode.c msi.c -o osslsigncode.exe \
    -lcrypto -lssl -lcurl \
    -D 'PACKAGE_STRING="osslsigncode 2.4"' \
    -D 'PACKAGE_BUGREPORT="Michal.Trojnara@stunnel.org"' \
@ -71,7 +71,7 @@
 3) Build 64-bit Windows executables.
 ```
  cd osslsigncode-folder
-  x86_64-w64-mingw32-gcc osslsigncode.c msi.c msi.h -o osslsigncode.exe \
+  x86_64-w64-mingw32-gcc osslsigncode.c msi.c -o osslsigncode.exe \
    -L 'C:/OpenSSL/lib/' -lcrypto -lssl \
    -I 'C:/OpenSSL/include/' \
    -L 'C:/curl/lib' -lcurl \
@ -94,28 +94,18 @@
        libcurl/7.78.0 OpenSSL/1.1.1k
 ```

-### Building OpenSSL, Curl and osslsigncode sources with Microsoft Visual Studio 64-bit:
+### Building OpenSSL, Curl and osslsigncode sources with Microsoft Visual Studio:

-1) Download and install Strawberry Perl from https://strawberryperl.com/
+1) Install and integrate vcpkg: https://vcpkg.io/en/getting-started.html

-2) Run "Open Visual Studio 2022 Tools Command Prompt for targeting x64"
-
-3) Build and install OpenSSL.
+2) Install the prerequisites:
 ```
-  cd openssl-(version)
-  perl Configure VC-WIN64A --prefix=C:\OpenSSL\vc-win64a --openssldir=C:\OpenSSL\SSL no-asm shared
-  nmake && nmake install
+  vcpkg install openssl curl
 ```

-4) Build and install curl.
-```
-  cd curl-(version)\winbuild
-  nmake /f Makefile.vc mode=dll WITH_PREFIX=C:\curl SSL_PATH=C:\OpenSSL\vc-win64a \
-    VC=22 MACHINE=x64 DEBUG=no WITH_SSL=dll ENABLE_NGHTTP2=no ENABLE_SSPI=no \
-    ENABLE_IDN=no GEN_PDB=no ENABLE_WINSSL=no USE_ZLIB=no
-```
+3) Git clone osslsigncode: https://github.com/mtrojnar/osslsigncode/

-5) Build 64-bit Windows osslsigncode.
+4) Build osslsigncode with GUI or cmake.
  Navigate to the build directory and run CMake to configure the osslsigncode project
  and generate a native build system:
 ```
@ -125,21 +115,18 @@
 ```
  -Denable-strict=ON
  -Denable-pedantic=ON
-  -Dwith-curl=OFF
-  -Dssl-path=C:\OpenSSL\
-  -Dcurl-path=C:\curl\
 ```
  Then call that build system to actually compile/link the osslsigncode project:
 ```
  cmake --build .
 ```

-6) Make tests.
+5) Make tests.
 ```
  ctest -C Release
 ```

-5) Make install (with administrator privileges).
+6) Make install (with administrative privileges).
 ```
  cmake --install . --prefix "C:\osslsigncode"
 ```
--- a/README.md
+++ b/README.md
@ -54,9 +54,6 @@ You may need to use `cmake3` instead of `cmake` to complete the following steps
 ```
  -Denable-strict=ON
  -Denable-pedantic=ON
-  -Dssl-path=/opt/openssl-3.0.2/
-  -Dcurl-path=/opt/curl-7.82/
-  -Dwith-curl=OFF
 ```
 * Then call that build system to actually compile/link the osslsigncode project (alias `make`):
 ```
--- a/cmake/FindCurl.cmake
+++ b/cmake/FindCurl.cmake
@ -1,47 +0,0 @@
-# find the native CURL headers and libraries
-
-if(with-curl)
-  if(curl-path)
-    set(CURL_SEARCH_DIR PATHS ${CURL_ROOT} NO_DEFAULT_PATH)
-    find_path(CURL_INCLUDE_DIRS
-      NAMES curl/curl.h
-      PATHS ${CURL_SEARCH_DIR}
-      PATH_SUFFIXES include
-      REQUIRED
-    )
-    find_library(CURL_LIBRARIES
-      NAMES libcurl libcurl.so
-      PATHS ${CURL_SEARCH_DIR}
-      PATH_SUFFIXES lib
-      NO_DEFAULT_PATH
-      REQUIRED
-    )
-    mark_as_advanced(
-      CURL_INCLUDE_DIRS
-      CURL_LIBRARIES
-    )
-    set(CURL_FOUND TRUE)
-  endif()
-
-  if(CURL_FOUND)
-    target_link_libraries(osslsigncode PRIVATE ${CURL_LIBRARIES})
-    include_directories(${CURL_INCLUDE_DIRS})
-    message(STATUS "Link CURL library: ${CURL_LIBRARIES}")
-    message(STATUS "Include CURL directory: ${CURL_INCLUDE_DIRS}")
-    set(ENABLE_CURL 1)
-  else()
-    MESSAGE(FATAL_ERROR "Could not find the CURL library and development files.")
-  endif()
-
-  if(MSVC)
-    find_path(CURL_BIN_DIR
-      NAMES curl.exe
-      PATHS ${CURL_SEARCH_DIR}
-      PATH_SUFFIXES bin
-      REQUIRED
-    )
-    set(CURL_LIB "${CURL_BIN_DIR}/libcurl.dll")
-  endif()
-else()
-  message(STATUS "Disable CURL")
-endif()
--- a/cmake/FindOpenssl.cmake
+++ b/cmake/FindOpenssl.cmake
@ -1,71 +0,0 @@
-# find the OpenSSL encryption library
-
-if(ssl-path)
-  set(OPENSSL_SEARCH_DIR PATHS ${OPENSSL_ROOT} NO_DEFAULT_PATH)
-  find_path(OPENSSL_INCLUDE_DIR
-    NAMES openssl/opensslconf.h
-    PATHS ${OPENSSL_SEARCH_DIR}
-    PATH_SUFFIXES include
-    REQUIRED
-  )
-  find_library(OPENSSL_SSL
-    NAMES libssl libssl.so
-    PATHS ${OPENSSL_SEARCH_DIR}
-    PATH_SUFFIXES lib lib64
-    NO_DEFAULT_PATH
-    REQUIRED
-  )
-  find_library(OPENSSL_CRYPTO
-    NAMES libcrypto libcrypto.so
-    PATHS ${OPENSSL_SEARCH_DIR}
-    PATH_SUFFIXES lib lib64
-    NO_DEFAULT_PATH
-    REQUIRED
-  )
-
-  if(MSVC)
-    find_file(OPENSSL_APPLINK_SOURCE
-      NAMES openssl/applink.c
-      PATHS ${OPENSSL_INCLUDE_DIR}
-      NO_DEFAULT_PATH
-      REQUIRED
-      )
-  else()
-    set(OPENSSL_APPLINK_SOURCE)
-  endif()
-
-  set(OPENSSL_LIBRARIES ${OPENSSL_SSL} ${OPENSSL_CRYPTO})
-  mark_as_advanced(
-    OPENSSL_INCLUDE_DIR
-    OPENSSL_LIBRARIES
-    OPENSSL_APPLINK_SOURCE
-  )
-  set(OPENSSL_FOUND TRUE)
-endif()
-
-if(OPENSSL_FOUND)
-  message(STATUS "Link OpenSSL libraries: ${OPENSSL_LIBRARIES}")
-  message(STATUS "Include OpenSSL directory: ${OPENSSL_INCLUDE_DIR}")
-  if(MSVC)
-    message(STATUS "OpenSSL applink source: ${OPENSSL_APPLINK_SOURCE}")
-  endif()
-else()
-  MESSAGE(FATAL_ERROR "Could not find the OpenSSL library and development files.")
-endif()
-
-if(MSVC)
-  find_path(OPENSSL_BIN_DIR
-    NAMES openssl.exe
-    PATHS ${OPENSSL_SEARCH_DIR}
-    PATH_SUFFIXES bin
-    REQUIRED
-  )
-  set(OPENSSL_LIBS "${OPENSSL_BIN_DIR}/libcrypto-3-x64.dll" "${OPENSSL_BIN_DIR}/libssl-3-x64.dll")
-endif()
-
-# add an executable target called "osslsigncode" to be built from the source files
-set(SOURCE_FILES osslsigncode.c msi.c ${OPENSSL_APPLINK_SOURCE})
-add_executable(osslsigncode)
-target_sources(osslsigncode PRIVATE ${SOURCE_FILES})
-target_link_libraries(osslsigncode PRIVATE ${OPENSSL_LIBRARIES})
-include_directories(${OPENSSL_INCLUDE_DIR})
--- a/cmake/SetOptions.cmake
+++ b/cmake/SetOptions.cmake
@ -9,30 +9,6 @@ option(enable-strict "Enable strict compile mode" OFF)
 option(enable-pedantic "Enable pedantic compile mode" OFF)
 option(with-curl "Enable curl" ON)

-if(MSVC)
-  set(ssl-path "D:/TEMP/OpenSSL-3.0.2/vc-win64a" CACHE FILEPATH "OpenSSL library path")
-  set(curl-path "D:/TEMP/curl-7.82.0" CACHE FILEPATH "cURL library path")
-else()
-  option(ssl-path "OpenSSL library path" OFF)
-  option(curl-path "cURL library path" OFF)
-endif()
-
-if(ssl-path)
-  set(OPENSSL_ROOT ${ssl-path})
-  set(OPENSSL_SEARCH_DIR)
-else()
-  include(FindOpenSSL)
-endif()
-
-if(with-curl)
-  if(curl-path)
-    set(CURL_ROOT ${curl-path})
-    set(CURL_BIN_DIR)
-  else()
-    include(FindCURL)
-  endif()
-endif()
-
 # enable compile options
 if(enable-strict)
  message(STATUS "Enable strict compile mode")