2006-04-23 18:26:03 +00:00
|
|
|
/*
|
|
|
|
|
* "Raw" backend.
|
|
|
|
|
*/
|
|
|
|
|
|
1999-11-01 16:40:40 +00:00
|
|
|
#include <stdio.h>
|
|
|
|
|
#include <stdlib.h>
|
2012-12-22 09:40:47 +00:00
|
|
|
#include <limits.h>
|
1999-11-01 16:40:40 +00:00
|
|
|
|
|
|
|
|
#include "putty.h"
|
|
|
|
|
|
2001-08-25 17:09:23 +00:00
|
|
|
#define RAW_MAX_BACKLOG 4096
|
|
|
|
|
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
typedef struct Raw Raw;
|
|
|
|
|
struct Raw {
|
|
|
|
|
Socket *s;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool closed_on_socket_error;
|
2019-02-06 20:42:44 +00:00
|
|
|
size_t bufsize;
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
Seat *seat;
|
Refactor the LogContext type.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
2018-10-10 18:26:18 +00:00
|
|
|
LogContext *logctx;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool sent_console_eof, sent_socket_eof, session_started;
|
2015-11-22 14:33:28 +00:00
|
|
|
|
|
|
|
|
Conf *conf;
|
2018-05-27 08:29:33 +00:00
|
|
|
|
2018-10-05 06:24:16 +00:00
|
|
|
Plug plug;
|
2018-09-11 15:23:38 +00:00
|
|
|
Backend backend;
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
};
|
1999-11-01 16:40:40 +00:00
|
|
|
|
2018-09-11 15:23:38 +00:00
|
|
|
static void raw_size(Backend *be, int width, int height);
|
2002-10-25 11:30:33 +00:00
|
|
|
|
2019-02-06 20:42:44 +00:00
|
|
|
static void c_write(Raw *raw, const void *buf, size_t len)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
2019-02-06 20:42:44 +00:00
|
|
|
size_t backlog = seat_stdout(raw->seat, buf, len);
|
2002-10-25 11:30:33 +00:00
|
|
|
sk_set_frozen(raw->s, backlog > RAW_MAX_BACKLOG);
|
1999-11-01 16:40:40 +00:00
|
|
|
}
|
|
|
|
|
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
static void raw_log(Plug *plug, int type, SockAddr *addr, int port,
|
2019-09-08 19:29:00 +00:00
|
|
|
const char *error_msg, int error_code)
|
2005-01-16 14:29:34 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(plug, Raw, plug);
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
backend_socket_log(raw->seat, raw->logctx, type, addr, port,
|
2015-11-22 14:33:28 +00:00
|
|
|
error_msg, error_code, raw->conf, raw->session_started);
|
2005-01-16 14:29:34 +00:00
|
|
|
}
|
|
|
|
|
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
static void raw_check_close(Raw *raw)
|
2011-09-13 11:44:03 +00:00
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* Called after we send EOF on either the socket or the console.
|
|
|
|
|
* Its job is to wind up the session once we have sent EOF on both.
|
|
|
|
|
*/
|
|
|
|
|
if (raw->sent_console_eof && raw->sent_socket_eof) {
|
|
|
|
|
if (raw->s) {
|
|
|
|
|
sk_close(raw->s);
|
|
|
|
|
raw->s = NULL;
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
seat_notify_remote_exit(raw->seat);
|
2011-09-13 11:44:03 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
static void raw_closing(Plug *plug, const char *error_msg, int error_code,
|
2019-09-08 19:29:00 +00:00
|
|
|
bool calling_back)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(plug, Raw, plug);
|
2002-10-25 11:30:33 +00:00
|
|
|
|
2001-03-13 10:22:45 +00:00
|
|
|
if (error_msg) {
|
2011-09-13 11:44:03 +00:00
|
|
|
/* A socket error has occurred. */
|
|
|
|
|
if (raw->s) {
|
|
|
|
|
sk_close(raw->s);
|
|
|
|
|
raw->s = NULL;
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->closed_on_socket_error = true;
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
seat_notify_remote_exit(raw->seat);
|
2011-09-13 11:44:03 +00:00
|
|
|
}
|
Refactor the LogContext type.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
2018-10-10 18:26:18 +00:00
|
|
|
logevent(raw->logctx, error_msg);
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
seat_connection_fatal(raw->seat, "%s", error_msg);
|
2011-09-13 11:44:03 +00:00
|
|
|
} else {
|
|
|
|
|
/* Otherwise, the remote side closed the connection normally. */
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
if (!raw->sent_console_eof && seat_eof(raw->seat)) {
|
2011-09-13 11:44:03 +00:00
|
|
|
/*
|
|
|
|
|
* The front end wants us to close the outgoing side of the
|
|
|
|
|
* connection as soon as we see EOF from the far end.
|
|
|
|
|
*/
|
|
|
|
|
if (!raw->sent_socket_eof) {
|
|
|
|
|
if (raw->s)
|
|
|
|
|
sk_write_eof(raw->s);
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->sent_socket_eof= true;
|
2011-09-13 11:44:03 +00:00
|
|
|
}
|
|
|
|
|
}
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->sent_console_eof = true;
|
2011-09-13 11:44:03 +00:00
|
|
|
raw_check_close(raw);
|
|
|
|
|
}
|
2001-03-13 10:22:45 +00:00
|
|
|
}
|
|
|
|
|
|
2019-02-06 20:42:44 +00:00
|
|
|
static void raw_receive(Plug *plug, int urgent, const char *data, size_t len)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(plug, Raw, plug);
|
2002-10-25 11:30:33 +00:00
|
|
|
c_write(raw, data, len);
|
2015-11-22 14:33:28 +00:00
|
|
|
/* We count 'session start', for proxy logging purposes, as being
|
|
|
|
|
* when data is received from the network and printed. */
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->session_started = true;
|
1999-11-01 16:40:40 +00:00
|
|
|
}
|
|
|
|
|
|
2019-02-06 20:42:44 +00:00
|
|
|
static void raw_sent(Plug *plug, size_t bufsize)
|
2001-09-07 22:39:01 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(plug, Raw, plug);
|
2002-10-25 11:30:33 +00:00
|
|
|
raw->bufsize = bufsize;
|
2001-09-07 22:39:01 +00:00
|
|
|
}
|
|
|
|
|
|
2018-10-05 06:03:46 +00:00
|
|
|
static const PlugVtable Raw_plugvt = {
|
2018-05-27 08:29:33 +00:00
|
|
|
raw_log,
|
|
|
|
|
raw_closing,
|
|
|
|
|
raw_receive,
|
|
|
|
|
raw_sent
|
|
|
|
|
};
|
|
|
|
|
|
1999-11-01 16:40:40 +00:00
|
|
|
/*
|
2000-10-23 10:32:37 +00:00
|
|
|
* Called to set up the raw connection.
|
2019-09-08 19:29:00 +00:00
|
|
|
*
|
1999-11-01 16:40:40 +00:00
|
|
|
* Returns an error message, or NULL on success.
|
|
|
|
|
*
|
2001-05-09 14:01:15 +00:00
|
|
|
* Also places the canonical host name into `realhost'. It must be
|
|
|
|
|
* freed by the caller.
|
1999-11-01 16:40:40 +00:00
|
|
|
*/
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
static const char *raw_init(Seat *seat, Backend **backend_handle,
|
Refactor the LogContext type.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
2018-10-10 18:26:18 +00:00
|
|
|
LogContext *logctx, Conf *conf,
|
2019-09-08 19:29:00 +00:00
|
|
|
const char *host, int port, char **realhost,
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool nodelay, bool keepalive)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
SockAddr *addr;
|
2003-05-04 14:18:18 +00:00
|
|
|
const char *err;
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
Raw *raw;
|
Post-release destabilisation! Completely remove the struct type
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
2011-07-14 18:52:21 +00:00
|
|
|
int addressfamily;
|
|
|
|
|
char *loghost;
|
1999-11-01 16:40:40 +00:00
|
|
|
|
2019-03-10 14:42:11 +00:00
|
|
|
/* No local authentication phase in this protocol */
|
|
|
|
|
seat_set_trust_status(seat, false);
|
|
|
|
|
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 18:10:23 +00:00
|
|
|
raw = snew(Raw);
|
2018-10-05 06:24:16 +00:00
|
|
|
raw->plug.vt = &Raw_plugvt;
|
2018-09-11 15:23:38 +00:00
|
|
|
raw->backend.vt = &raw_backend;
|
2002-10-25 11:30:33 +00:00
|
|
|
raw->s = NULL;
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->closed_on_socket_error = false;
|
2018-09-11 15:23:38 +00:00
|
|
|
*backend_handle = &raw->backend;
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->sent_console_eof = raw->sent_socket_eof = false;
|
2014-11-22 16:35:54 +00:00
|
|
|
raw->bufsize = 0;
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->session_started = false;
|
2015-11-22 14:33:28 +00:00
|
|
|
raw->conf = conf_copy(conf);
|
2002-10-25 11:30:33 +00:00
|
|
|
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 18:58:42 +00:00
|
|
|
raw->seat = seat;
|
Refactor the LogContext type.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
2018-10-10 18:26:18 +00:00
|
|
|
raw->logctx = logctx;
|
2002-10-22 16:11:33 +00:00
|
|
|
|
Post-release destabilisation! Completely remove the struct type
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
2011-07-14 18:52:21 +00:00
|
|
|
addressfamily = conf_get_int(conf, CONF_addressfamily);
|
1999-11-01 16:40:40 +00:00
|
|
|
/*
|
|
|
|
|
* Try to find host.
|
|
|
|
|
*/
|
2015-11-22 09:58:14 +00:00
|
|
|
addr = name_lookup(host, port, realhost, conf, addressfamily,
|
Refactor the LogContext type.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
2018-10-10 18:26:18 +00:00
|
|
|
raw->logctx, "main connection");
|
2003-08-07 16:04:33 +00:00
|
|
|
if ((err = sk_addr_error(addr)) != NULL) {
|
2019-09-08 19:29:00 +00:00
|
|
|
sk_addr_free(addr);
|
|
|
|
|
return err;
|
2003-08-07 16:04:33 +00:00
|
|
|
}
|
1999-11-01 16:40:40 +00:00
|
|
|
|
|
|
|
|
if (port < 0)
|
2019-09-08 19:29:00 +00:00
|
|
|
port = 23; /* default telnet port */
|
1999-11-01 16:40:40 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Open socket.
|
|
|
|
|
*/
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
raw->s = new_connection(addr, *realhost, port, false, true, nodelay,
|
|
|
|
|
keepalive, &raw->plug, conf);
|
2003-01-04 16:21:17 +00:00
|
|
|
if ((err = sk_socket_error(raw->s)) != NULL)
|
2019-09-08 19:29:00 +00:00
|
|
|
return err;
|
1999-11-01 16:40:40 +00:00
|
|
|
|
Post-release destabilisation! Completely remove the struct type
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
2011-07-14 18:52:21 +00:00
|
|
|
loghost = conf_get_str(conf, CONF_loghost);
|
|
|
|
|
if (*loghost) {
|
2019-09-08 19:29:00 +00:00
|
|
|
char *colon;
|
2008-06-01 11:16:32 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
sfree(*realhost);
|
|
|
|
|
*realhost = dupstr(loghost);
|
2014-01-25 15:58:54 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
colon = host_strrchr(*realhost, ':');
|
|
|
|
|
if (colon)
|
|
|
|
|
*colon++ = '\0';
|
2008-06-01 11:16:32 +00:00
|
|
|
}
|
|
|
|
|
|
1999-11-01 16:40:40 +00:00
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
2018-09-11 15:23:38 +00:00
|
|
|
static void raw_free(Backend *be)
|
2003-01-15 23:30:21 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(be, Raw, backend);
|
2003-01-15 23:30:21 +00:00
|
|
|
|
|
|
|
|
if (raw->s)
|
2019-09-08 19:29:00 +00:00
|
|
|
sk_close(raw->s);
|
2015-11-22 14:33:28 +00:00
|
|
|
conf_free(raw->conf);
|
2003-01-15 23:30:21 +00:00
|
|
|
sfree(raw);
|
|
|
|
|
}
|
|
|
|
|
|
2003-01-12 14:48:29 +00:00
|
|
|
/*
|
|
|
|
|
* Stub routine (we don't have any need to reconfigure this backend).
|
|
|
|
|
*/
|
2018-09-11 15:23:38 +00:00
|
|
|
static void raw_reconfig(Backend *be, Conf *conf)
|
2003-01-12 14:48:29 +00:00
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
1999-11-01 16:40:40 +00:00
|
|
|
/*
|
|
|
|
|
* Called to send data down the raw connection.
|
|
|
|
|
*/
|
2019-02-06 20:42:44 +00:00
|
|
|
static size_t raw_send(Backend *be, const char *buf, size_t len)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(be, Raw, backend);
|
2002-10-25 11:30:33 +00:00
|
|
|
|
|
|
|
|
if (raw->s == NULL)
|
2019-09-08 19:29:00 +00:00
|
|
|
return 0;
|
1999-11-01 16:40:40 +00:00
|
|
|
|
2002-10-25 11:30:33 +00:00
|
|
|
raw->bufsize = sk_write(raw->s, buf, len);
|
2001-08-25 17:09:23 +00:00
|
|
|
|
2002-10-25 11:30:33 +00:00
|
|
|
return raw->bufsize;
|
2001-08-25 17:09:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Called to query the current socket sendability status.
|
|
|
|
|
*/
|
2019-02-06 20:42:44 +00:00
|
|
|
static size_t raw_sendbuffer(Backend *be)
|
2001-08-25 17:09:23 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(be, Raw, backend);
|
2002-10-25 11:30:33 +00:00
|
|
|
return raw->bufsize;
|
1999-11-01 16:40:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Called to set the size of the window
|
|
|
|
|
*/
|
2018-09-11 15:23:38 +00:00
|
|
|
static void raw_size(Backend *be, int width, int height)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
1999-11-01 16:40:40 +00:00
|
|
|
/* Do nothing! */
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
2011-09-13 11:44:03 +00:00
|
|
|
* Send raw special codes. We only handle outgoing EOF here.
|
1999-11-01 16:40:40 +00:00
|
|
|
*/
|
Rework special-commands system to add an integer argument.
In order to list cross-certifiable host keys in the GUI specials menu,
the SSH backend has been inventing new values on the end of the
Telnet_Special enumeration, starting from the value TS_LOCALSTART.
This is inelegant, and also makes it awkward to break up special
handlers (e.g. to dispatch different specials to different SSH
layers), since if all you know about a special is that it's somewhere
in the TS_LOCALSTART+n space, you can't tell what _general kind_ of
thing it is. Also, if I ever need another open-ended set of specials
in future, I'll have to remember which TS_LOCALSTART+n codes are in
which set.
So here's a revamp that causes every special to take an extra integer
argument. For all previously numbered specials, this argument is
passed as zero and ignored, but there's a new main special code for
SSH host key cross-certification, in which the integer argument is an
index into the backend's list of available keys. TS_LOCALSTART is now
a thing of the past: if I need any other open-ended sets of specials
in future, I can add a new top-level code with a nicely separated
space of arguments.
While I'm at it, I've removed the legacy misnomer 'Telnet_Special'
from the code completely; the enum is now SessionSpecialCode, the
struct containing full details of a menu entry is SessionSpecial, and
the enum values now start SS_ rather than TS_.
2018-09-24 08:35:52 +00:00
|
|
|
static void raw_special(Backend *be, SessionSpecialCode code, int arg)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(be, Raw, backend);
|
Rework special-commands system to add an integer argument.
In order to list cross-certifiable host keys in the GUI specials menu,
the SSH backend has been inventing new values on the end of the
Telnet_Special enumeration, starting from the value TS_LOCALSTART.
This is inelegant, and also makes it awkward to break up special
handlers (e.g. to dispatch different specials to different SSH
layers), since if all you know about a special is that it's somewhere
in the TS_LOCALSTART+n space, you can't tell what _general kind_ of
thing it is. Also, if I ever need another open-ended set of specials
in future, I'll have to remember which TS_LOCALSTART+n codes are in
which set.
So here's a revamp that causes every special to take an extra integer
argument. For all previously numbered specials, this argument is
passed as zero and ignored, but there's a new main special code for
SSH host key cross-certification, in which the integer argument is an
index into the backend's list of available keys. TS_LOCALSTART is now
a thing of the past: if I need any other open-ended sets of specials
in future, I can add a new top-level code with a nicely separated
space of arguments.
While I'm at it, I've removed the legacy misnomer 'Telnet_Special'
from the code completely; the enum is now SessionSpecialCode, the
struct containing full details of a menu entry is SessionSpecial, and
the enum values now start SS_ rather than TS_.
2018-09-24 08:35:52 +00:00
|
|
|
if (code == SS_EOF && raw->s) {
|
2011-09-13 11:44:03 +00:00
|
|
|
sk_write_eof(raw->s);
|
2018-10-29 19:50:29 +00:00
|
|
|
raw->sent_socket_eof= true;
|
2011-09-13 11:44:03 +00:00
|
|
|
raw_check_close(raw);
|
|
|
|
|
}
|
|
|
|
|
|
1999-11-01 16:40:40 +00:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
2003-04-04 20:21:05 +00:00
|
|
|
/*
|
|
|
|
|
* Return a list of the special codes that make sense in this
|
|
|
|
|
* protocol.
|
|
|
|
|
*/
|
Rework special-commands system to add an integer argument.
In order to list cross-certifiable host keys in the GUI specials menu,
the SSH backend has been inventing new values on the end of the
Telnet_Special enumeration, starting from the value TS_LOCALSTART.
This is inelegant, and also makes it awkward to break up special
handlers (e.g. to dispatch different specials to different SSH
layers), since if all you know about a special is that it's somewhere
in the TS_LOCALSTART+n space, you can't tell what _general kind_ of
thing it is. Also, if I ever need another open-ended set of specials
in future, I'll have to remember which TS_LOCALSTART+n codes are in
which set.
So here's a revamp that causes every special to take an extra integer
argument. For all previously numbered specials, this argument is
passed as zero and ignored, but there's a new main special code for
SSH host key cross-certification, in which the integer argument is an
index into the backend's list of available keys. TS_LOCALSTART is now
a thing of the past: if I need any other open-ended sets of specials
in future, I can add a new top-level code with a nicely separated
space of arguments.
While I'm at it, I've removed the legacy misnomer 'Telnet_Special'
from the code completely; the enum is now SessionSpecialCode, the
struct containing full details of a menu entry is SessionSpecial, and
the enum values now start SS_ rather than TS_.
2018-09-24 08:35:52 +00:00
|
|
|
static const SessionSpecial *raw_get_specials(Backend *be)
|
2003-04-04 20:21:05 +00:00
|
|
|
{
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
static bool raw_connected(Backend *be)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(be, Raw, backend);
|
2006-08-27 08:03:19 +00:00
|
|
|
return raw->s != NULL;
|
2001-05-06 14:35:20 +00:00
|
|
|
}
|
2000-09-08 16:42:11 +00:00
|
|
|
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
static bool raw_sendok(Backend *be)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
return true;
|
2001-05-06 14:35:20 +00:00
|
|
|
}
|
2000-09-08 14:45:20 +00:00
|
|
|
|
2019-02-06 20:42:44 +00:00
|
|
|
static void raw_unthrottle(Backend *be, size_t backlog)
|
2001-08-25 17:09:23 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(be, Raw, backend);
|
2002-10-25 11:30:33 +00:00
|
|
|
sk_set_frozen(raw->s, backlog > RAW_MAX_BACKLOG);
|
2001-08-25 17:09:23 +00:00
|
|
|
}
|
|
|
|
|
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
static bool raw_ldisc(Backend *be, int option)
|
2001-05-06 14:35:20 +00:00
|
|
|
{
|
2001-01-24 14:08:20 +00:00
|
|
|
if (option == LD_EDIT || option == LD_ECHO)
|
2019-09-08 19:29:00 +00:00
|
|
|
return true;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
return false;
|
2001-01-24 14:08:20 +00:00
|
|
|
}
|
|
|
|
|
|
2018-09-11 15:23:38 +00:00
|
|
|
static void raw_provide_ldisc(Backend *be, Ldisc *ldisc)
|
2002-10-26 10:16:19 +00:00
|
|
|
{
|
|
|
|
|
/* This is a stub. */
|
|
|
|
|
}
|
|
|
|
|
|
2018-09-11 15:23:38 +00:00
|
|
|
static int raw_exitcode(Backend *be)
|
2001-12-29 15:31:42 +00:00
|
|
|
{
|
2018-10-05 22:49:08 +00:00
|
|
|
Raw *raw = container_of(be, Raw, backend);
|
2003-03-31 12:10:08 +00:00
|
|
|
if (raw->s != NULL)
|
|
|
|
|
return -1; /* still connected */
|
2012-12-22 09:40:47 +00:00
|
|
|
else if (raw->closed_on_socket_error)
|
|
|
|
|
return INT_MAX; /* a socket error counts as an unclean exit */
|
2003-03-31 12:10:08 +00:00
|
|
|
else
|
|
|
|
|
/* Exit codes are a meaningless concept in the Raw protocol */
|
|
|
|
|
return 0;
|
2001-12-29 15:31:42 +00:00
|
|
|
}
|
|
|
|
|
|
2004-12-29 12:32:25 +00:00
|
|
|
/*
|
|
|
|
|
* cfg_info for Raw does nothing at all.
|
|
|
|
|
*/
|
2018-09-11 15:23:38 +00:00
|
|
|
static int raw_cfg_info(Backend *be)
|
2004-12-29 12:32:25 +00:00
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2018-10-05 06:03:46 +00:00
|
|
|
const struct BackendVtable raw_backend = {
|
1999-11-01 16:40:40 +00:00
|
|
|
raw_init,
|
2003-01-15 23:30:21 +00:00
|
|
|
raw_free,
|
2003-01-12 14:48:29 +00:00
|
|
|
raw_reconfig,
|
1999-11-01 16:40:40 +00:00
|
|
|
raw_send,
|
2001-08-25 17:09:23 +00:00
|
|
|
raw_sendbuffer,
|
1999-11-01 16:40:40 +00:00
|
|
|
raw_size,
|
2000-09-08 14:45:20 +00:00
|
|
|
raw_special,
|
2003-04-04 20:21:05 +00:00
|
|
|
raw_get_specials,
|
2006-08-27 08:03:19 +00:00
|
|
|
raw_connected,
|
2001-12-29 15:31:42 +00:00
|
|
|
raw_exitcode,
|
2000-10-04 14:35:15 +00:00
|
|
|
raw_sendok,
|
2001-01-24 14:08:20 +00:00
|
|
|
raw_ldisc,
|
2002-10-26 10:16:19 +00:00
|
|
|
raw_provide_ldisc,
|
2001-08-25 17:09:23 +00:00
|
|
|
raw_unthrottle,
|
2004-12-29 12:32:25 +00:00
|
|
|
raw_cfg_info,
|
2015-09-25 10:46:28 +00:00
|
|
|
NULL /* test_for_upstream */,
|
2007-06-30 21:56:44 +00:00
|
|
|
"raw",
|
|
|
|
|
PROT_RAW,
|
2007-07-01 15:47:31 +00:00
|
|
|
0
|
1999-11-01 16:40:40 +00:00
|
|
|
};
|