nhyatt/putty-source
1
0
Fork 0
mirror of https://git.tartarus.org/simon/putty.git synced 2025-01-09 17:38:00 +00:00
Code Issues Projects Releases Wiki Activity
3c6ab5bbb7
putty-source/unix/gtkmain.c

674 lines
19 KiB
C
Raw Normal View History

Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
/*
* gtkmain.c: the common main-program code between the straight-up
* Unix PuTTY and pterm, which they do not share with the
* multi-session gtkapp.c.
*/
#define _GNU_SOURCE
#include <string.h>
#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include <signal.h>
#include <stdio.h>
#include <time.h>
#include <errno.h>
#include <locale.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <gtk/gtk.h>
#if !GTK_CHECK_VERSION(3,0,0)
#include <gdk/gdkkeysyms.h>
#endif
#if GTK_CHECK_VERSION(2,0,0)
#include <gtk/gtkimmodule.h>
#endif
#define MAY_REFER_TO_GTK_IN_HEADERS
#include "putty.h"
#include "terminal.h"
#include "gtkcompat.h"
#include "gtkfont.h"
#include "gtkmisc.h"
#ifndef NOT_X_WINDOWS
#include <gdk/gdkx.h>
#include <X11/Xlib.h>
#include <X11/Xutil.h>
#include <X11/Xatom.h>
Basic support for running under GDK Wayland back end. GTK 3 PuTTY/pterm has always assumed that if it was compiled with _support_ for talking to the raw X11 layer underneath GTK and GDK, then it was entitled to expect that raw X11 layer to exist at all times, i.e. that GDK_DISPLAY_XDISPLAY would return a meaningful X display that it could do useful things with. So if you ran it over the GDK Wayland backend, it would immediately segfault. Modern GTK applications need to cope with multiple GDK backends at run time. It's fine for GTK PuTTY to _contain_ the code to find and use underlying X11 primitives like the display and the X window id, but it should be prepared to find that it's running on Wayland (or something else again!) so those functions don't return anything useful - in which case it should degrade gracefully to the subset of functionality that can be accessed through backend-independent GTK calls. Accordingly, I've centralised the use of GDK_DISPLAY_XDISPLAY into a support function get_x_display() in gtkmisc.c, which starts by checking that there actually is one first. All previous direct uses of GDK_*_XDISPLAY now go via that function, and check the result for NULL afterwards. (To save faffing about calling that function too many times, I'm also caching the display pointer in more places, and passing it as an extra argument to various subfunctions, mostly in gtkfont.c.) Similarly, the get_windowid() function that retrieves the window id to put in the environment of pterm's child process has to be prepared for there not to be a window id. This isn't a complete fix for all Wayland-related problems. The other one I'm currently aware of is that the default font is "server:fixed", which is a bad default now that it won't be available on all backends. And I expect that further problems will show up with more testing. But it's a start.
2018-05-09 08:18:20 +00:00
#include "x11misc.h"
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
#endif
static char *progname, **gtkargvstart;
static int ngtkargs;
static const char *app_name = "pterm";
char *x_get_default(const char *key)
{
#ifndef NOT_X_WINDOWS
Basic support for running under GDK Wayland back end. GTK 3 PuTTY/pterm has always assumed that if it was compiled with _support_ for talking to the raw X11 layer underneath GTK and GDK, then it was entitled to expect that raw X11 layer to exist at all times, i.e. that GDK_DISPLAY_XDISPLAY would return a meaningful X display that it could do useful things with. So if you ran it over the GDK Wayland backend, it would immediately segfault. Modern GTK applications need to cope with multiple GDK backends at run time. It's fine for GTK PuTTY to _contain_ the code to find and use underlying X11 primitives like the display and the X window id, but it should be prepared to find that it's running on Wayland (or something else again!) so those functions don't return anything useful - in which case it should degrade gracefully to the subset of functionality that can be accessed through backend-independent GTK calls. Accordingly, I've centralised the use of GDK_DISPLAY_XDISPLAY into a support function get_x_display() in gtkmisc.c, which starts by checking that there actually is one first. All previous direct uses of GDK_*_XDISPLAY now go via that function, and check the result for NULL afterwards. (To save faffing about calling that function too many times, I'm also caching the display pointer in more places, and passing it as an extra argument to various subfunctions, mostly in gtkfont.c.) Similarly, the get_windowid() function that retrieves the window id to put in the environment of pterm's child process has to be prepared for there not to be a window id. This isn't a complete fix for all Wayland-related problems. The other one I'm currently aware of is that the default font is "server:fixed", which is a bad default now that it won't be available on all backends. And I expect that further problems will show up with more testing. But it's a start.
2018-05-09 08:18:20 +00:00
Display *disp;
if ((disp = get_x11_display()) == NULL)
return NULL;
return XGetDefault(disp, app_name, key);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
#else
return NULL;
#endif
}
void fork_and_exec_self(int fd_to_close, ...)
{
/*
* Re-execing ourself is not an exact science under Unix. I do
* the best I can by using /proc/self/exe if available and by
* assuming argv[0] can be found on $PATH if not.
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
*
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
* Note that we also have to reconstruct the elements of the
* original argv which gtk swallowed, since the user wants the
* new session to appear on the same X display as the old one.
*/
char **args;
va_list ap;
int i, n;
int pid;
/*
* Collect the arguments with which to re-exec ourself.
*/
va_start(ap, fd_to_close);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
n = 2; /* progname and terminating NULL */
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
n += ngtkargs;
while (va_arg(ap, char *) != NULL)
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
n++;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
va_end(ap);
args = snewn(n, char *);
args[0] = progname;
args[n-1] = NULL;
for (i = 0; i < ngtkargs; i++)
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
args[i+1] = gtkargvstart[i];
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
i++;
va_start(ap, fd_to_close);
while ((args[i++] = va_arg(ap, char *)) != NULL);
va_end(ap);
assert(i == n);
/*
* Do the double fork.
*/
pid = fork();
if (pid < 0) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
perror("fork");
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
sfree(args);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
return;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
if (pid == 0) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
int pid2 = fork();
if (pid2 < 0) {
perror("fork");
_exit(1);
} else if (pid2 > 0) {
/*
* First child has successfully forked second child. My
* Work Here Is Done. Note the use of _exit rather than
* exit: the latter appears to cause destroy messages
* to be sent to the X server. I suspect gtk uses
* atexit.
*/
_exit(0);
}
/*
* If we reach here, we are the second child, so we now
* actually perform the exec.
*/
if (fd_to_close >= 0)
close(fd_to_close);
execv("/proc/self/exe", args);
execvp(progname, args);
perror("exec");
_exit(127);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
} else {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
int status;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
sfree(args);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
waitpid(pid, &status, 0);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
}
void launch_duplicate_session(Conf *conf)
{
/*
* For this feature we must marshal conf and (possibly) pty_argv
* into a byte stream, create a pipe, and send this byte stream
* to the child through the pipe.
*/
Use the BinarySink system for conf serialisation. Now instead of iterating through conf twice in separate functions, once to count up the size of the serialised data and once to write it out, I just go through once and dump it all in a strbuf. (Of course, I could still do a two-pass count-then-allocate approach easily enough in this system; nothing would stop me writing a BinarySink implementation that didn't actually store any data and just counted its size, and then I could choose at each call site whether I preferred to do it that way.)
2018-05-24 09:48:20 +00:00
int i, ret;
strbuf *serialised;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
char option[80];
int pipefd[2];
if (pipe(pipefd) < 0) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
perror("pipe");
return;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
Use the BinarySink system for conf serialisation. Now instead of iterating through conf twice in separate functions, once to count up the size of the serialised data and once to write it out, I just go through once and dump it all in a strbuf. (Of course, I could still do a two-pass count-then-allocate approach easily enough in this system; nothing would stop me writing a BinarySink implementation that didn't actually store any data and just counted its size, and then I could choose at each call site whether I preferred to do it that way.)
2018-05-24 09:48:20 +00:00
serialised = strbuf_new();
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Use the BinarySink system for conf serialisation. Now instead of iterating through conf twice in separate functions, once to count up the size of the serialised data and once to write it out, I just go through once and dump it all in a strbuf. (Of course, I could still do a two-pass count-then-allocate approach easily enough in this system; nothing would stop me writing a BinarySink implementation that didn't actually store any data and just counted its size, and then I could choose at each call site whether I preferred to do it that way.)
2018-05-24 09:48:20 +00:00
conf_serialise(BinarySink_UPCAST(serialised), conf);
if (use_pty_argv && pty_argv)
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
for (i = 0; pty_argv[i]; i++)
Use the BinarySink system for conf serialisation. Now instead of iterating through conf twice in separate functions, once to count up the size of the serialised data and once to write it out, I just go through once and dump it all in a strbuf. (Of course, I could still do a two-pass count-then-allocate approach easily enough in this system; nothing would stop me writing a BinarySink implementation that didn't actually store any data and just counted its size, and then I could choose at each call site whether I preferred to do it that way.)
2018-05-24 09:48:20 +00:00
put_asciz(serialised, pty_argv[i]);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
New array-growing macros: sgrowarray and sgrowarrayn. The idea of these is that they centralise the common idiom along the lines of if (logical_array_len >= physical_array_size) { physical_array_size = logical_array_len * 5 / 4 + 256; array = sresize(array, physical_array_size, ElementType); } which happens at a zillion call sites throughout this code base, with different random choices of the geometric factor and additive constant, sometimes forgetting them completely, and generally doing a lot of repeated work. The new macro sgrowarray(array,size,n) has the semantics: here are the array pointer and its physical size for you to modify, now please ensure that the nth element exists, so I can write into it. And sgrowarrayn(array,size,n,m) is the same except that it ensures that the array has size at least n+m (so sgrowarray is just the special case where m=1). Now that this is a single centralised implementation that will be used everywhere, I've also gone to more effort in the implementation, with careful overflow checks that would have been painful to put at all the previous call sites. This commit also switches over every use of sresize(), apart from a few where I really didn't think it would gain anything. A consequence of that is that a lot of array-size variables have to have their types changed to size_t, because the macros require that (they address-take the size to pass to the underlying function).
2019-02-28 20:07:30 +00:00
sprintf(option, "---[%d,%zu]", pipefd[0], serialised->len);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
noncloexec(pipefd[0]);
fork_and_exec_self(pipefd[1], option, NULL);
close(pipefd[0]);
i = ret = 0;
Use the BinarySink system for conf serialisation. Now instead of iterating through conf twice in separate functions, once to count up the size of the serialised data and once to write it out, I just go through once and dump it all in a strbuf. (Of course, I could still do a two-pass count-then-allocate approach easily enough in this system; nothing would stop me writing a BinarySink implementation that didn't actually store any data and just counted its size, and then I could choose at each call site whether I preferred to do it that way.)
2018-05-24 09:48:20 +00:00
while (i < serialised->len &&
(ret = write(pipefd[1], serialised->s + i,
serialised->len - i)) > 0)
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
i += ret;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
if (ret < 0)
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
perror("write to pipe");
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
close(pipefd[1]);
Use the BinarySink system for conf serialisation. Now instead of iterating through conf twice in separate functions, once to count up the size of the serialised data and once to write it out, I just go through once and dump it all in a strbuf. (Of course, I could still do a two-pass count-then-allocate approach easily enough in this system; nothing would stop me writing a BinarySink implementation that didn't actually store any data and just counted its size, and then I could choose at each call site whether I preferred to do it that way.)
2018-05-24 09:48:20 +00:00
strbuf_free(serialised);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
void launch_new_session(void)
{
fork_and_exec_self(-1, NULL);
}
void launch_saved_session(const char *str)
{
fork_and_exec_self(-1, "-load", str, NULL);
}
int read_dupsession_data(Conf *conf, char *arg)
{
Rewrite conf deserialisation using BinarySource. Like the corresponding rewrite of conf serialisation, this affects not just conf_deserialise itself but also the per-platform filename and fontspec deserialisers.
2018-05-28 14:36:15 +00:00
int fd, i, ret, size;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
char *data;
Rewrite conf deserialisation using BinarySource. Like the corresponding rewrite of conf serialisation, this affects not just conf_deserialise itself but also the per-platform filename and fontspec deserialisers.
2018-05-28 14:36:15 +00:00
BinarySource src[1];
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
if (sscanf(arg, "---[%d,%d]", &fd, &size) != 2) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
fprintf(stderr, "%s: malformed magic argument `%s'\n", appname, arg);
exit(1);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
data = snewn(size, char);
i = ret = 0;
while (i < size && (ret = read(fd, data + i, size - i)) > 0)
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
i += ret;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
if (ret < 0) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
perror("read from pipe");
exit(1);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
} else if (i < size) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
fprintf(stderr, "%s: unexpected EOF in Duplicate Session data\n",
appname);
exit(1);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
Rewrite conf deserialisation using BinarySource. Like the corresponding rewrite of conf serialisation, this affects not just conf_deserialise itself but also the per-platform filename and fontspec deserialisers.
2018-05-28 14:36:15 +00:00
BinarySource_BARE_INIT(src, data, size);
if (!conf_deserialise(conf, src)) {
fprintf(stderr, "%s: malformed Duplicate Session data\n", appname);
exit(1);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
Rewrite conf deserialisation using BinarySource. Like the corresponding rewrite of conf serialisation, this affects not just conf_deserialise itself but also the per-platform filename and fontspec deserialisers.
2018-05-28 14:36:15 +00:00
if (use_pty_argv) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
int pty_argc = 0;
Rewrite conf deserialisation using BinarySource. Like the corresponding rewrite of conf serialisation, this affects not just conf_deserialise itself but also the per-platform filename and fontspec deserialisers.
2018-05-28 14:36:15 +00:00
size_t argv_startpos = src->pos;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Rewrite conf deserialisation using BinarySource. Like the corresponding rewrite of conf serialisation, this affects not just conf_deserialise itself but also the per-platform filename and fontspec deserialisers.
2018-05-28 14:36:15 +00:00
while (get_asciz(src), !get_err(src))
pty_argc++;
src->err = BSE_NO_ERROR;
if (pty_argc > 0) {
src->pos = argv_startpos;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Rewrite conf deserialisation using BinarySource. Like the corresponding rewrite of conf serialisation, this affects not just conf_deserialise itself but also the per-platform filename and fontspec deserialisers.
2018-05-28 14:36:15 +00:00
pty_argv = snewn(pty_argc + 1, char *);
pty_argv[pty_argc] = NULL;
for (i = 0; i < pty_argc; i++)
pty_argv[i] = dupstr(get_asciz(src));
}
}
if (get_err(src) || get_avail(src) > 0) {
fprintf(stderr, "%s: malformed Duplicate Session data\n", appname);
exit(1);
}
sfree(data);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
return 0;
}
static void help(FILE *fp) {
if(fprintf(fp,
"pterm option summary:\n"
"\n"
" --display DISPLAY Specify X display to use (note '--')\n"
" -name PREFIX Prefix when looking up resources (default: pterm)\n"
" -fn FONT Normal text font\n"
" -fb FONT Bold text font\n"
" -geometry GEOMETRY Position and size of window (size in characters)\n"
" -sl LINES Number of lines of scrollback\n"
" -fg COLOUR, -bg COLOUR Foreground/background colour\n"
" -bfg COLOUR, -bbg COLOUR Foreground/background bold colour\n"
" -cfg COLOUR, -bfg COLOUR Foreground/background cursor colour\n"
" -T TITLE Window title\n"
" -ut, +ut Do(default) or do not update utmp\n"
" -ls, +ls Do(default) or do not make shell a login shell\n"
" -sb, +sb Do(default) or do not display a scrollbar\n"
" -log PATH, -sessionlog PATH Log all output to a file\n"
" -nethack Map numeric keypad to hjklyubn direction keys\n"
" -xrm RESOURCE-STRING Set an X resource\n"
" -e COMMAND [ARGS...] Execute command (consumes all remaining args)\n"
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
) < 0 || fflush(fp) < 0) {
perror("output error");
exit(1);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
}
static void version(FILE *fp) {
Include 'build info' in all --version text and About boxes. This shows the build platform (32- vs 64-bit in particular, and also whether Unix GTK builds were compiled with or without the X11 pieces), what compiler was used to build the binary, and any interesting build options that might have been set on the make command line (especially, but not limited to, the security-damaging ones like NO_SECURITY or UNPROTECT). This will probably be useful all over the place, but in particular it should allow the different Windows binaries to be told apart! Commits 21101c739 and 2eb952ca3 laid the groundwork for this, by allowing the various About boxes to contain free text and also ensuring they could be copied and pasted easily as part of a bug report.
2017-01-21 14:55:53 +00:00
char *buildinfo_text = buildinfo("\n");
if(fprintf(fp, "%s: %s\n%s\n", appname, ver, buildinfo_text) < 0 ||
fflush(fp) < 0) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
perror("output error");
exit(1);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
Include 'build info' in all --version text and About boxes. This shows the build platform (32- vs 64-bit in particular, and also whether Unix GTK builds were compiled with or without the X11 pieces), what compiler was used to build the binary, and any interesting build options that might have been set on the make command line (especially, but not limited to, the security-damaging ones like NO_SECURITY or UNPROTECT). This will probably be useful all over the place, but in particular it should allow the different Windows binaries to be told apart! Commits 21101c739 and 2eb952ca3 laid the groundwork for this, by allowing the various About boxes to contain free text and also ensuring they could be copied and pasted easily as part of a bug report.
2017-01-21 14:55:53 +00:00
sfree(buildinfo_text);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
static const char *geometry_string;
Move gtkwin.c's cmdline_error() into gtkmain.c. Not all gtkwin-based tools use it. Only the ones with one session per process, which parse a command line describing that session and might reasonably want to report errors in that command line by writing to standard error and exiting the program. In other words, precisely the ones that link in gtkmain.c and not gtkapp.c. So gtkmain.c is a more sensible place to put that error-reporting function.
2017-11-27 19:40:13 +00:00
void cmdline_error(const char *p, ...)
{
va_list ap;
fprintf(stderr, "%s: ", appname);
va_start(ap, p);
vfprintf(stderr, p, ap);
va_end(ap);
fputc('\n', stderr);
exit(1);
}
GTK: fix the exit(1) response to startup-time font errors. For gtkapp-based tools that will have to stop being a program-fatal error, so I've turned it into a function called window_setup_error (which I could in principle reuse for other problems in the long and tortuous progress of new_session_window), and kept the original handling in gtkmain.c's implementation of that function while gtkapp.c does something more sensible with a message box.
2017-11-27 20:09:54 +00:00
void window_setup_error(const char *errmsg)
{
fprintf(stderr, "%s: %s\n", appname, errmsg);
exit(1);
}
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool do_cmdline(int argc, char **argv, bool do_everything, Conf *conf)
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
{
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool err = false;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
char *val;
/*
GTK: fix control flow in do_cmdline(). In commit 4ecc3f3c09 I did a knee-jerk fix of a macro of the form #define SECOND_PASS_ONLY { body; } on the grounds that it was syntax-unsafe, so I wrapped it in the standard do while(0): #define SECOND_PASS_ONLY do { body; } while (0) But in this case, that was a bogus transformation, because the body executed 'continue' with the intention of affecting the containing loop (outside the macro). Moreover, ten lines above the macro definition was a comment specifically explaining why it _couldn't_ be wrapped in do while (0) ! Since then I've come up with an alternative break-and-continue-proof wrapper for macros that are supposed to expand to something that's syntactically a C statement. So I've used that instead, and while I'm at it, fixed the neighbouring EXPECTS_ARG as well. Spotted by Coverity, and well spotted indeed! How embarrassing.
2020-06-16 16:48:18 +00:00
* Macros to make argument handling easier.
*
* Note that because they need to call `continue', they cannot be
* contained in the usual do {...} while (0) wrapper to make them
* syntactically single statements. I use the alternative if (1)
* {...} else ((void)0).
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
*/
GTK: fix control flow in do_cmdline(). In commit 4ecc3f3c09 I did a knee-jerk fix of a macro of the form #define SECOND_PASS_ONLY { body; } on the grounds that it was syntax-unsafe, so I wrapped it in the standard do while(0): #define SECOND_PASS_ONLY do { body; } while (0) But in this case, that was a bogus transformation, because the body executed 'continue' with the intention of affecting the containing loop (outside the macro). Moreover, ten lines above the macro definition was a comment specifically explaining why it _couldn't_ be wrapped in do while (0) ! Since then I've come up with an alternative break-and-continue-proof wrapper for macros that are supposed to expand to something that's syntactically a C statement. So I've used that instead, and while I'm at it, fixed the neighbouring EXPECTS_ARG as well. Spotted by Coverity, and well spotted indeed! How embarrassing.
2020-06-16 16:48:18 +00:00
#define EXPECTS_ARG if (1) { \
if (--argc <= 0) { \
err = true; \
fprintf(stderr, "%s: %s expects an argument\n", appname, p); \
continue; \
} else \
val = *++argv; \
} else ((void)0)
#define SECOND_PASS_ONLY if (1) { \
if (!do_everything) \
continue; \
} else ((void)0)
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
while (--argc > 0) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
const char *p = *++argv;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
int ret;
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
/*
* Shameless cheating. Debian requires all X terminal
* emulators to support `-T title'; but
* cmdline_process_param will eat -T (it means no-pty) and
* complain that pterm doesn't support it. So, in pterm
* only, we convert -T into -title.
*/
if ((cmdline_tooltype & TOOLTYPE_NONNETWORK) &&
!strcmp(p, "-T"))
p = "-title";
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
ret = cmdline_process_param(p, (argc > 1 ? argv[1] : NULL),
do_everything ? 1 : -1, conf);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
if (ret == -2) {
cmdline_error("option \"%s\" requires an argument", p);
} else if (ret == 2) {
--argc, ++argv; /* skip next argument */
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
continue;
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (ret == 1) {
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
continue;
}
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
if (!strcmp(p, "-fn") || !strcmp(p, "-font")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fs = fontspec_new(val);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
conf_set_fontspec(conf, CONF_font, fs);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fontspec_free(fs);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-fb")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fs = fontspec_new(val);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
conf_set_fontspec(conf, CONF_boldfont, fs);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fontspec_free(fs);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-fw")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fs = fontspec_new(val);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
conf_set_fontspec(conf, CONF_widefont, fs);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fontspec_free(fs);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-fwb")) {
FontSpec *fs;
EXPECTS_ARG;
SECOND_PASS_ONLY;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fs = fontspec_new(val);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
conf_set_fontspec(conf, CONF_wideboldfont, fs);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fontspec_free(fs);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-cs")) {
EXPECTS_ARG;
SECOND_PASS_ONLY;
conf_set_str(conf, CONF_line_codepage, val);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-geometry")) {
EXPECTS_ARG;
SECOND_PASS_ONLY;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
geometry_string = val;
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-sl")) {
EXPECTS_ARG;
SECOND_PASS_ONLY;
conf_set_int(conf, CONF_savelines, atoi(val));
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-fg") || !strcmp(p, "-bg") ||
!strcmp(p, "-bfg") || !strcmp(p, "-bbg") ||
!strcmp(p, "-cfg") || !strcmp(p, "-cbg")) {
EXPECTS_ARG;
SECOND_PASS_ONLY;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
{
#if GTK_CHECK_VERSION(3,0,0)
GdkRGBA rgba;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool success = gdk_rgba_parse(&rgba, val);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
#else
GdkColor col;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool success = gdk_color_parse(val, &col);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
#endif
if (!success) {
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
err = true;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fprintf(stderr, "%s: unable to parse colour \"%s\"\n",
appname, val);
} else {
#if GTK_CHECK_VERSION(3,0,0)
int r = rgba.red * 255;
int g = rgba.green * 255;
int b = rgba.blue * 255;
#else
int r = col.red / 256;
int g = col.green / 256;
int b = col.blue / 256;
#endif
int index;
index = (!strcmp(p, "-fg") ? 0 :
!strcmp(p, "-bg") ? 2 :
!strcmp(p, "-bfg") ? 1 :
!strcmp(p, "-bbg") ? 3 :
!strcmp(p, "-cfg") ? 4 :
!strcmp(p, "-cbg") ? 5 : -1);
assert(index != -1);
conf_set_int_int(conf, CONF_colours, index*3+0, r);
conf_set_int_int(conf, CONF_colours, index*3+1, g);
conf_set_int_int(conf, CONF_colours, index*3+2, b);
}
}
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (use_pty_argv && !strcmp(p, "-e")) {
/* This option swallows all further arguments. */
if (!do_everything)
break;
if (--argc > 0) {
int i;
pty_argv = snewn(argc+1, char *);
++argv;
for (i = 0; i < argc; i++)
pty_argv[i] = argv[i];
pty_argv[argc] = NULL;
break; /* finished command-line processing */
} else
err = true, fprintf(stderr, "%s: -e expects an argument\n",
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
appname);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-title")) {
EXPECTS_ARG;
SECOND_PASS_ONLY;
conf_set_str(conf, CONF_wintitle, val);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-log")) {
Filename *fn;
EXPECTS_ARG;
SECOND_PASS_ONLY;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
fn = filename_from_str(val);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
conf_set_filename(conf, CONF_logfilename, fn);
conf_set_int(conf, CONF_logtype, LGTYP_DEBUG);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
filename_free(fn);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-ut-") || !strcmp(p, "+ut")) {
SECOND_PASS_ONLY;
conf_set_bool(conf, CONF_stamp_utmp, false);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-ut")) {
SECOND_PASS_ONLY;
conf_set_bool(conf, CONF_stamp_utmp, true);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-ls-") || !strcmp(p, "+ls")) {
SECOND_PASS_ONLY;
conf_set_bool(conf, CONF_login_shell, false);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-ls")) {
SECOND_PASS_ONLY;
conf_set_bool(conf, CONF_login_shell, true);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-nethack")) {
SECOND_PASS_ONLY;
conf_set_bool(conf, CONF_nethack_keypad, true);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-sb-") || !strcmp(p, "+sb")) {
SECOND_PASS_ONLY;
conf_set_bool(conf, CONF_scrollbar, false);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-sb")) {
SECOND_PASS_ONLY;
conf_set_bool(conf, CONF_scrollbar, true);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-name")) {
EXPECTS_ARG;
app_name = val;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (!strcmp(p, "-xrm")) {
EXPECTS_ARG;
provide_xrm_string(val, appname);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if(!strcmp(p, "-help") || !strcmp(p, "--help")) {
help(stdout);
exit(0);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if(!strcmp(p, "-version") || !strcmp(p, "--version")) {
version(stdout);
exit(0);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
} else if (!strcmp(p, "-pgpfp")) {
pgp_fingerprints();
exit(1);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else if (p[0] != '-') {
Centralise PuTTY and Plink's non-option argument handling. This is another piece of long-overdue refactoring similar to the recent commit e3796cb77. But where that one dealt with normalisation of stuff already stored _in_ a Conf by whatever means (including, in particular, handling a user typing 'username@host.name' into the Hostname box of the GUI session dialog box), this one deals with handling argv entries and putting them into the Conf. This isn't exactly a pure no-functional-change-at-all refactoring. On the other hand, it isn't a full-on cleanup that completely rationalises all the user-visible behaviour as well as the code structure. It's somewhere in between: I've preserved all the behaviour quirks that I could imagine a reason for having intended, but taken the opportunity to _not_ faithfully replicate anything I thought was clearly just a bug. So, for example, the following inconsistency is carefully preserved: the command 'plink -load session nextword' treats 'nextword' as a host name if the loaded session hasn't provided a hostname already, and otherwise treats 'nextword' as the remote command to execute on the already-specified remote host, but the same combination of arguments to GUI PuTTY will _always_ treat 'nextword' as a hostname, overriding a hostname (if any) in the saved session. That makes some sense to me because of the different shapes of the overall command lines. On the other hand, there are two behaviour changes I know of as a result of this commit: a third argument to GUI PuTTY (after a hostname and port) now provokes an error message instead of being silently ignored, and in Plink, if you combine a -P option (specifying a port number) with the historical comma-separated protocol selection prefix on the hostname argument (which I'd completely forgotten even existed until this piece of work), then the -P will now override the selected protocol's default port number, whereas previously the default port would win. For example, 'plink -P 12345 telnet,hostname' will now connect via Telnet to port 12345 instead of to port 23. There may be scope for removing or rethinking some of the command- line syntax quirks in the wake of this change. If we do decide to do anything like that, then hopefully having it all in one place will make it easier to remove or change things consistently across the tools.
2017-12-07 19:59:43 +00:00
/* Non-option arguments not handled by cmdline.c are errors. */
if (do_everything) {
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
err = true;
Centralise PuTTY and Plink's non-option argument handling. This is another piece of long-overdue refactoring similar to the recent commit e3796cb77. But where that one dealt with normalisation of stuff already stored _in_ a Conf by whatever means (including, in particular, handling a user typing 'username@host.name' into the Hostname box of the GUI session dialog box), this one deals with handling argv entries and putting them into the Conf. This isn't exactly a pure no-functional-change-at-all refactoring. On the other hand, it isn't a full-on cleanup that completely rationalises all the user-visible behaviour as well as the code structure. It's somewhere in between: I've preserved all the behaviour quirks that I could imagine a reason for having intended, but taken the opportunity to _not_ faithfully replicate anything I thought was clearly just a bug. So, for example, the following inconsistency is carefully preserved: the command 'plink -load session nextword' treats 'nextword' as a host name if the loaded session hasn't provided a hostname already, and otherwise treats 'nextword' as the remote command to execute on the already-specified remote host, but the same combination of arguments to GUI PuTTY will _always_ treat 'nextword' as a hostname, overriding a hostname (if any) in the saved session. That makes some sense to me because of the different shapes of the overall command lines. On the other hand, there are two behaviour changes I know of as a result of this commit: a third argument to GUI PuTTY (after a hostname and port) now provokes an error message instead of being silently ignored, and in Plink, if you combine a -P option (specifying a port number) with the historical comma-separated protocol selection prefix on the hostname argument (which I'd completely forgotten even existed until this piece of work), then the -P will now override the selected protocol's default port number, whereas previously the default port would win. For example, 'plink -P 12345 telnet,hostname' will now connect via Telnet to port 12345 instead of to port 23. There may be scope for removing or rethinking some of the command- line syntax quirks in the wake of this change. If we do decide to do anything like that, then hopefully having it all in one place will make it easier to remove or change things consistently across the tools.
2017-12-07 19:59:43 +00:00
fprintf(stderr, "%s: unexpected non-option argument '%s'\n",
appname, p);
}
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
} else {
err = true;
fprintf(stderr, "%s: unrecognized option '%s'\n", appname, p);
}
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
return err;
}
Remove the 'Frontend' type and replace it with a vtable. After the recent Seat and LogContext revamps, _nearly_ all the remaining uses of the type 'Frontend' were in terminal.c, which needs all sorts of interactions with the GUI window the terminal lives in, from the obvious (actually drawing text on the window, reading and writing the clipboard) to the obscure (minimising, maximising and moving the window in response to particular escape sequences). All of those functions are now provided by an abstraction called TermWin. The few remaining uses of Frontend after _that_ are internal to a particular platform directory, so as to spread the implementation of that particular kind of Frontend between multiple source files; so I've renamed all of those so that they take a more specifically named type that refers to the particular implementation rather than the general abstraction. So now the name 'Frontend' no longer exists in the code base at all, and everywhere one used to be used, it's completely clear whether it was operating in one of Frontend's three abstract roles (and if so, which), or whether it was specific to a particular implementation. Another type that's disappeared is 'Context', which used to be a typedef defined to something different on each platform, describing whatever short-lived resources were necessary to draw on the terminal window: the front end would provide a ready-made one when calling term_paint, and the terminal could request one with get_ctx/free_ctx if it wanted to do proactive window updates. Now that drawing context lives inside the TermWin itself, because there was never any need to have two of those contexts live at the same time. (Another minor API change is that the window-title functions - both reading and writing - have had a missing 'const' added to their char * parameters / return values.) I don't expect this change to enable any particularly interesting new functionality (in particular, I have no plans that need more than one implementation of TermWin in the same application). But it completes the tidying-up that began with the Seat and LogContext rework.
2018-10-25 17:44:04 +00:00
GtkWidget *make_gtk_toplevel_window(GtkFrontend *frontend)
Delegate GTK window creation to gtkmain.c. This is a weird thing to have to do, but it is necessary: the OS X PuTTY will need its top-level windows to be instances of a thing called GtkApplicationWindow, rather than plain GtkWindow. Hence, the actual creation of windows needs to be somewhere that isn't centralised between the two kinds of front end.
2016-03-23 22:03:46 +00:00
{
return gtk_window_new(GTK_WINDOW_TOPLEVEL);
}
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
const bool buildinfo_gtk_relevant = true;
Unix buildinfo: stop saying 'GTK' in pure CLI utilities. Unix PSCP, PSFTP, Plink and PuTTYgen now just report their build platform as '64-bit Unix' or '32-bit Unix', without mentioning irrelevant details of what flavour of GTK the other tools in the suite might have been built against. (In particular, they now won't imply anything outright untrue if there was no GTK present at build time at all!)
2017-02-22 22:10:05 +00:00
Make the configuration dialog non-modal. Now every call to do_config_box is replaced with a call to create_config_box, which returns immediately having constructed the new GTK window object, and is passed a callback function which it will arrange to be called when the dialog terminates (whether by OK or by Cancel). That callback is now what triggers the construction of a session window after 'Open' is pressed in the initial config box, or the actual mid-session reconfiguration action after 'Apply' is pressed in a Change Settings box. We were already prepared to ignore the re-selection of 'Change Settings' from the context menu of a window that already had a Change Settings box open (and not accidentally create a second config box for the same window); but now we do slightly better, by finding the existing config box and un-minimising and raising it, in case the user had forgotten it was there. That's a useful featurelet, but not the main purpose of this change. The mani point, of course, is that now the multi-window GtkApplication based front ends now don't do anything confusing to the nesting of gtk_main() when config boxes are involved. Whether you're changing the settings of one (or more than one) of your already-running sessions, preparing to start up a new PuTTY connection, or both at once, we stay in the same top-level instance of gtk_main() and all sessions' top- level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
struct post_initial_config_box_ctx {
Conf *conf;
const char *geometry_string;
};
static void post_initial_config_box(void *vctx, int result)
{
struct post_initial_config_box_ctx ctx =
*(struct post_initial_config_box_ctx *)vctx;
sfree(vctx);
Fix a cleanup issue in dlgparam_destroy. If a dialog box is destroyed by the program before the user has pressed one of the result-delivering buttons - e.g. because the parent window closes so the dialog is no longer relevant to anything anyway - then dlgparam_destroy would never call the client code's provided callback. That makes sense in terms of the callback wanting to _take action_ based on the result of the dialog box, but it ignores the possibility that the callback may simply need to free its own context structure. So now dlgparam_destroy always calls the client's callback, even if the result it passes is negative (meaning 'the user never got round to pressing any of the dialog-ending buttons'), and all the existing client callbacks handle the negative-result case by doing nothing except freeing any allocated memory they might have.
2017-11-26 14:37:38 +00:00
if (result > 0) {
Make the configuration dialog non-modal. Now every call to do_config_box is replaced with a call to create_config_box, which returns immediately having constructed the new GTK window object, and is passed a callback function which it will arrange to be called when the dialog terminates (whether by OK or by Cancel). That callback is now what triggers the construction of a session window after 'Open' is pressed in the initial config box, or the actual mid-session reconfiguration action after 'Apply' is pressed in a Change Settings box. We were already prepared to ignore the re-selection of 'Change Settings' from the context menu of a window that already had a Change Settings box open (and not accidentally create a second config box for the same window); but now we do slightly better, by finding the existing config box and un-minimising and raising it, in case the user had forgotten it was there. That's a useful featurelet, but not the main purpose of this change. The mani point, of course, is that now the multi-window GtkApplication based front ends now don't do anything confusing to the nesting of gtk_main() when config boxes are involved. Whether you're changing the settings of one (or more than one) of your already-running sessions, preparing to start up a new PuTTY connection, or both at once, we stay in the same top-level instance of gtk_main() and all sessions' top- level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
new_session_window(ctx.conf, ctx.geometry_string);
Cope with "delete_window" event on the GTK config box. That causes the config dialog to terminate with result -1, which wasn't handled at all by the result-receiving code. So GTK PuTTY would continue running its main loop even though it had no windows open and wasn't ever planning to do anything. (cherry picked from commit 4fc5d7a5f5528e2f75e781a2fd0a1fd775f53858)
2020-03-13 22:48:53 +00:00
} else {
Make the configuration dialog non-modal. Now every call to do_config_box is replaced with a call to create_config_box, which returns immediately having constructed the new GTK window object, and is passed a callback function which it will arrange to be called when the dialog terminates (whether by OK or by Cancel). That callback is now what triggers the construction of a session window after 'Open' is pressed in the initial config box, or the actual mid-session reconfiguration action after 'Apply' is pressed in a Change Settings box. We were already prepared to ignore the re-selection of 'Change Settings' from the context menu of a window that already had a Change Settings box open (and not accidentally create a second config box for the same window); but now we do slightly better, by finding the existing config box and un-minimising and raising it, in case the user had forgotten it was there. That's a useful featurelet, but not the main purpose of this change. The mani point, of course, is that now the multi-window GtkApplication based front ends now don't do anything confusing to the nesting of gtk_main() when config boxes are involved. Whether you're changing the settings of one (or more than one) of your already-running sessions, preparing to start up a new PuTTY connection, or both at once, we stay in the same top-level instance of gtk_main() and all sessions' top- level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
/* In this main(), which only runs one session in total, a
* negative result from the initial config box means we simply
* terminate. */
conf_free(ctx.conf);
gtk_main_quit();
}
}
void session_window_closed(void)
{
gtk_main_quit();
}
Make gtkmain.c contain the actual main(). Instead of main() living in uxputty.c and uxpterm.c, and doing a little bit of setup before calling the larger pt_main() in gtkmain.c, I've now turned things backwards: the big function in gtkmain.c *is* main(), and the small pieces of preliminary setup in uxputty.c and uxpterm.c are now a function called setup() which is called from there. This will allow me to reuse the rest of ux{putty,pterm}.c, i.e. the assorted top-level bits and pieces that distinguish PuTTY from pterm, in the upcoming OS X application that will have its own main().
2016-03-23 21:58:40 +00:00
int main(int argc, char **argv)
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
{
Conf *conf;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool need_config_box;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
setlocale(LC_CTYPE, "");
Move all extern declarations into header files. This is another cleanup I felt a need for while I was doing boolification. If you define a function or variable in one .c file and declare it extern in another, then nothing will check you haven't got the types of the two declarations mismatched - so when you're _changing_ the type, it's a pain to make sure you've caught all the copies of it. It's better to put all those extern declarations in header files, so that the declaration in the header is also in scope for the definition. Then the compiler will complain if they don't match, which is what I want.
2018-11-03 10:06:33 +00:00
/* Call the function in ux{putty,pterm}.c to do app-type
* specific setup */
setup(true); /* true means we are a one-session process */
Make gtkmain.c contain the actual main(). Instead of main() living in uxputty.c and uxpterm.c, and doing a little bit of setup before calling the larger pt_main() in gtkmain.c, I've now turned things backwards: the big function in gtkmain.c *is* main(), and the small pieces of preliminary setup in uxputty.c and uxpterm.c are now a function called setup() which is called from there. This will allow me to reuse the rest of ux{putty,pterm}.c, i.e. the assorted top-level bits and pieces that distinguish PuTTY from pterm, in the upcoming OS X application that will have its own main().
2016-03-23 21:58:40 +00:00
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
progname = argv[0];
/*
* Copy the original argv before letting gtk_init fiddle with
* it. It will be required later.
*/
{
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
int i, oldargc;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
gtkargvstart = snewn(argc-1, char *);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
for (i = 1; i < argc; i++)
gtkargvstart[i-1] = dupstr(argv[i]);
oldargc = argc;
gtk_init(&argc, &argv);
ngtkargs = oldargc - argc;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
conf = conf_new();
gtkcomm_setup();
/*
* Block SIGPIPE: if we attempt Duplicate Session or similar and
* it falls over in some way, we certainly don't want SIGPIPE
* terminating the main pterm/PuTTY. However, we'll have to
* unblock it again when pterm forks.
*/
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
block_signal(SIGPIPE, true);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
if (argc > 1 && !strncmp(argv[1], "---", 3)) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
read_dupsession_data(conf, argv[1]);
/* Splatter this argument so it doesn't clutter a ps listing */
smemclr(argv[1], strlen(argv[1]));
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Omit the conf_launchable check in pterm Duplicate Session. It won't return true, because pterm's use of conf is a bit nonstandard (it doesn't really bother about the protocol field, and has no use for either host names _or_ serial port filenames). Was affecting both gtkapp and gtkmain based builds.
2016-03-27 13:10:06 +00:00
assert(!dup_check_launchable || conf_launchable(conf));
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
need_config_box = false;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
} else {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
if (do_cmdline(argc, argv, false, conf))
exit(1); /* pre-defaults pass to get -class */
do_defaults(NULL, conf);
if (do_cmdline(argc, argv, true, conf))
exit(1); /* post-defaults, do everything */
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
cmdline_run_saved(conf);
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
Fix assertion failure that prevents pterm starting up. When testing the previous commit, I went to great lengths to check all the tricky corner cases of the detailed command-line argument handling in Plink and PuTTY, on Windows and Unix. And did I also double-check that I had not completely broken the very simplest possible invocation of pterm? I did not. The call to cmdline_host_ok() in gtkmain.c was failing an assertion in pterm, because that function only expects to have been called by a program that has the TOOLTYPE_HOST_ARG flag set - if that flag isn't set, the program is expected to come up with its own answer to the question (because I wasn't sure what the right fallback answer would be). And I forgot to conditionalise the call between PuTTY and pterm.
2017-12-08 19:34:35 +00:00
if (cmdline_tooltype & TOOLTYPE_HOST_ARG)
need_config_box = !cmdline_host_ok(conf);
else
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
need_config_box = false;
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
}
Make the configuration dialog non-modal. Now every call to do_config_box is replaced with a call to create_config_box, which returns immediately having constructed the new GTK window object, and is passed a callback function which it will arrange to be called when the dialog terminates (whether by OK or by Cancel). That callback is now what triggers the construction of a session window after 'Open' is pressed in the initial config box, or the actual mid-session reconfiguration action after 'Apply' is pressed in a Change Settings box. We were already prepared to ignore the re-selection of 'Change Settings' from the context menu of a window that already had a Change Settings box open (and not accidentally create a second config box for the same window); but now we do slightly better, by finding the existing config box and un-minimising and raising it, in case the user had forgotten it was there. That's a useful featurelet, but not the main purpose of this change. The mani point, of course, is that now the multi-window GtkApplication based front ends now don't do anything confusing to the nesting of gtk_main() when config boxes are involved. Whether you're changing the settings of one (or more than one) of your already-running sessions, preparing to start up a new PuTTY connection, or both at once, we stay in the same top-level instance of gtk_main() and all sessions' top- level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
if (need_config_box) {
/*
* Put up the initial config box, which will pass the provided
* parameters (with conf updated) to new_session_window() when
* (if) the user selects Open. Or it might close without
* creating a session window, if the user selects Cancel. Or
* it might just create the session window immediately if this
* is a pterm-style app which doesn't have an initial config
* box at all.
*/
struct post_initial_config_box_ctx *ctx =
snew(struct post_initial_config_box_ctx);
ctx->conf = conf;
ctx->geometry_string = geometry_string;
initial_config_box(conf, post_initial_config_box, ctx);
} else {
/*
* No initial config needed; just create the session window
* now.
*/
new_session_window(conf, geometry_string);
}
Divide the whole of gtkwin.c into three parts. This lays further groundwork for the OS X GTK3 port, which is going to have to deal with multiple sessions sharing the same process. gtkwin.c was a bit too monolithic for this, since it included some process-global runtime state (timers, toplevel callbacks), some process startup stuff (gtk_init, gtk_main, argv processing) and some per-session-window stuff. The per-session stuff remains in gtkwin.c, with the top-level function now being new_session_window() taking a Conf. The new gtkmain.c contains the outer skeleton of pt_main(), handling argv processing and one-off startup stuff like setlocale; and the new gtkcomm.c contains the pieces of PuTTY infrastructure like timers and uxsel that are shared between multiple sessions rather than reinstantiated per session, which have been rewritten to use global variables rather than fields in 'inst' (since it's now clear to me that they'll have to apply to all the insts in existence at once). There are still some lurking assumptions of one-session-per-process, e.g. the use of gtk_main_quit when a session finishes, and the fact that the config box insists on running as a separate invocation of gtk_main so that one session's preliminary config box can't coexist with another session already active. But this should make it possible to at least write an OS X app good enough to start testing with, even if it doesn't get everything quite right yet. This change is almost entirely rearranging existing code, so it shouldn't be seriously destabilising. But two noticeable actual changes have happened, both pleasantly simplifying: Firstly, the global-variables rewrite of gtkcomm.c has allowed the post_main edifice to become a great deal simpler. Most of its complexity was about remembering what 'inst' it had to call back to, and in fact the right answer is that it shouldn't be calling back to one at all. So now the post_main() called by gtkdlg.c has become the same function as the old inst_post_main() that actually did the work, instead of the two having to be connected by a piece of ugly plumbing. Secondly, a piece of code that's vanished completely in this refactoring is the temporary blocking of SIGCHLD around most of the session setup code. This turns out to have been introduced in 2002, _before_ I switched to using the intra-process signal pipe strategy for SIGCHLD handling in 2003. So I now expect that we should be robust in any case against receiving SIGCHLD at an inconvenient moment, and hence there's no need to block it.
2016-03-22 21:24:30 +00:00
gtk_main();
return 0;
}
Reference in New Issue Copy Permalink