Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
/*
|
|
|
|
|
* Packet protocol layer for the SSH-1 login phase (combining what
|
|
|
|
|
* SSH-2 would think of as key exchange and user authentication).
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <assert.h>
|
|
|
|
|
|
|
|
|
|
#include "putty.h"
|
|
|
|
|
#include "ssh.h"
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
#include "mpint.h"
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
#include "sshbpp.h"
|
|
|
|
|
#include "sshppl.h"
|
|
|
|
|
#include "sshcr.h"
|
|
|
|
|
|
|
|
|
|
struct ssh1_login_state {
|
|
|
|
|
int crState;
|
|
|
|
|
|
|
|
|
|
PacketProtocolLayer *successor_layer;
|
|
|
|
|
|
|
|
|
|
Conf *conf;
|
|
|
|
|
|
|
|
|
|
char *savedhost;
|
|
|
|
|
int savedport;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool try_agent_auth;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
int remote_protoflags;
|
|
|
|
|
int local_protoflags;
|
|
|
|
|
unsigned char session_key[32];
|
|
|
|
|
char *username;
|
|
|
|
|
agent_pending_query *auth_agent_query;
|
|
|
|
|
|
|
|
|
|
int len;
|
|
|
|
|
unsigned char *rsabuf;
|
|
|
|
|
unsigned long supported_ciphers_mask, supported_auths_mask;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool tried_publickey, tried_agent;
|
|
|
|
|
bool tis_auth_refused, ccard_auth_refused;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
unsigned char cookie[8];
|
|
|
|
|
unsigned char session_id[16];
|
|
|
|
|
int cipher_type;
|
|
|
|
|
strbuf *publickey_blob;
|
|
|
|
|
char *publickey_comment;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool privatekey_available, privatekey_encrypted;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
prompts_t *cur_prompt;
|
|
|
|
|
int userpass_ret;
|
|
|
|
|
char c;
|
|
|
|
|
int pwpkt_type;
|
|
|
|
|
void *agent_response_to_free;
|
|
|
|
|
ptrlen agent_response;
|
|
|
|
|
BinarySource asrc[1]; /* response from SSH agent */
|
|
|
|
|
int keyi, nkeys;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool authed;
|
2019-01-04 06:51:44 +00:00
|
|
|
RSAKey key;
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
mp_int *challenge;
|
2019-01-20 16:42:58 +00:00
|
|
|
strbuf *agent_comment;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
int dlgret;
|
|
|
|
|
Filename *keyfile;
|
2019-01-04 06:51:44 +00:00
|
|
|
RSAKey servkey, hostkey;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool want_user_input;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
PacketProtocolLayer ppl;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_free(PacketProtocolLayer *);
|
|
|
|
|
static void ssh1_login_process_queue(PacketProtocolLayer *);
|
|
|
|
|
static void ssh1_login_dialog_callback(void *, int);
|
|
|
|
|
static void ssh1_login_special_cmd(PacketProtocolLayer *ppl,
|
|
|
|
|
SessionSpecialCode code, int arg);
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
static bool ssh1_login_want_user_input(PacketProtocolLayer *ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
static void ssh1_login_got_user_input(PacketProtocolLayer *ppl);
|
|
|
|
|
static void ssh1_login_reconfigure(PacketProtocolLayer *ppl, Conf *conf);
|
|
|
|
|
|
|
|
|
|
static const struct PacketProtocolLayerVtable ssh1_login_vtable = {
|
|
|
|
|
ssh1_login_free,
|
|
|
|
|
ssh1_login_process_queue,
|
|
|
|
|
ssh1_common_get_specials,
|
|
|
|
|
ssh1_login_special_cmd,
|
|
|
|
|
ssh1_login_want_user_input,
|
|
|
|
|
ssh1_login_got_user_input,
|
|
|
|
|
ssh1_login_reconfigure,
|
|
|
|
|
NULL /* no layer names in SSH-1 */,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_agent_query(struct ssh1_login_state *s, strbuf *req);
|
|
|
|
|
static void ssh1_login_agent_callback(void *loginv, void *reply, int replylen);
|
|
|
|
|
|
|
|
|
|
PacketProtocolLayer *ssh1_login_new(
|
|
|
|
|
Conf *conf, const char *host, int port,
|
|
|
|
|
PacketProtocolLayer *successor_layer)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_login_state *s = snew(struct ssh1_login_state);
|
|
|
|
|
memset(s, 0, sizeof(*s));
|
|
|
|
|
s->ppl.vt = &ssh1_login_vtable;
|
|
|
|
|
|
|
|
|
|
s->conf = conf_copy(conf);
|
|
|
|
|
s->savedhost = dupstr(host);
|
|
|
|
|
s->savedport = port;
|
|
|
|
|
s->successor_layer = successor_layer;
|
2019-01-20 16:42:58 +00:00
|
|
|
s->agent_comment = strbuf_new();
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
return &s->ppl;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_free(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
2018-10-05 23:49:08 +01:00
|
|
|
struct ssh1_login_state *s =
|
|
|
|
|
container_of(ppl, struct ssh1_login_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
if (s->successor_layer)
|
|
|
|
|
ssh_ppl_free(s->successor_layer);
|
|
|
|
|
|
|
|
|
|
conf_free(s->conf);
|
|
|
|
|
sfree(s->savedhost);
|
|
|
|
|
sfree(s->rsabuf);
|
|
|
|
|
sfree(s->username);
|
|
|
|
|
if (s->publickey_blob)
|
|
|
|
|
strbuf_free(s->publickey_blob);
|
|
|
|
|
sfree(s->publickey_comment);
|
2019-01-20 16:42:58 +00:00
|
|
|
strbuf_free(s->agent_comment);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if (s->cur_prompt)
|
|
|
|
|
free_prompts(s->cur_prompt);
|
|
|
|
|
sfree(s->agent_response_to_free);
|
|
|
|
|
if (s->auth_agent_query)
|
|
|
|
|
agent_cancel_query(s->auth_agent_query);
|
|
|
|
|
sfree(s);
|
|
|
|
|
}
|
|
|
|
|
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
static bool ssh1_login_filter_queue(struct ssh1_login_state *s)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
{
|
|
|
|
|
return ssh1_common_filter_queue(&s->ppl);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static PktIn *ssh1_login_pop(struct ssh1_login_state *s)
|
|
|
|
|
{
|
|
|
|
|
if (ssh1_login_filter_queue(s))
|
|
|
|
|
return NULL;
|
|
|
|
|
return pq_pop(s->ppl.in_pq);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_process_queue(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
2018-10-05 23:49:08 +01:00
|
|
|
struct ssh1_login_state *s =
|
|
|
|
|
container_of(ppl, struct ssh1_login_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
PktIn *pktin;
|
|
|
|
|
PktOut *pkt;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
/* Filter centrally handled messages off the front of the queue on
|
|
|
|
|
* every entry to this coroutine, no matter where we're resuming
|
|
|
|
|
* from, even if we're _not_ looping on pq_pop. That way we can
|
|
|
|
|
* still proactively handle those messages even if we're waiting
|
|
|
|
|
* for a user response. */
|
|
|
|
|
if (ssh1_login_filter_queue(s))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
crBegin(s->crState);
|
|
|
|
|
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s)) != NULL);
|
|
|
|
|
|
|
|
|
|
if (pktin->type != SSH1_SMSG_PUBLIC_KEY) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Public key packet not received");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Received public keys");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
{
|
|
|
|
|
ptrlen pl = get_data(pktin, 8);
|
|
|
|
|
memcpy(s->cookie, pl.ptr, pl.len);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
get_rsa_ssh1_pub(pktin, &s->servkey, RSA_SSH1_EXPONENT_FIRST);
|
|
|
|
|
get_rsa_ssh1_pub(pktin, &s->hostkey, RSA_SSH1_EXPONENT_FIRST);
|
|
|
|
|
|
|
|
|
|
s->hostkey.comment = NULL; /* avoid confusing rsa_ssh1_fingerprint */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Log the host key fingerprint.
|
|
|
|
|
*/
|
|
|
|
|
if (!get_err(pktin)) {
|
|
|
|
|
char *fingerprint = rsa_ssh1_fingerprint(&s->hostkey);
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Host key fingerprint is:");
|
|
|
|
|
ppl_logevent(" %s", fingerprint);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
sfree(fingerprint);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
s->remote_protoflags = get_uint32(pktin);
|
|
|
|
|
s->supported_ciphers_mask = get_uint32(pktin);
|
|
|
|
|
s->supported_auths_mask = get_uint32(pktin);
|
|
|
|
|
|
|
|
|
|
if (get_err(pktin)) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Bad SSH-1 public key packet");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ((s->ppl.remote_bugs & BUG_CHOKES_ON_RSA))
|
|
|
|
|
s->supported_auths_mask &= ~(1 << SSH1_AUTH_RSA);
|
|
|
|
|
|
|
|
|
|
s->local_protoflags =
|
|
|
|
|
s->remote_protoflags & SSH1_PROTOFLAGS_SUPPORTED;
|
|
|
|
|
s->local_protoflags |= SSH1_PROTOFLAG_SCREEN_NUMBER;
|
|
|
|
|
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 17:57:37 +01:00
|
|
|
ssh1_compute_session_id(s->session_id, s->cookie,
|
|
|
|
|
&s->hostkey, &s->servkey);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
Replace random_byte() with random_read().
This is in preparation for a PRNG revamp which will want to have a
well defined boundary for any given request-for-randomness, so that it
can destroy the evidence afterwards. So no more looping round calling
random_byte() and then stopping when we feel like it: now you say up
front how many random bytes you want, and call random_read() which
gives you that many in one go.
Most of the call sites that had to be fixed are fairly mechanical, and
quite a few ended up more concise afterwards. A few became more
cumbersome, such as mp_random_bits, in which the new API doesn't let
me load the random bytes directly into the target integer without
triggering undefined behaviour, so instead I have to allocate a
separate temporary buffer.
The _most_ interesting call site was in the PKCS#1 v1.5 padding code
in sshrsa.c (used in SSH-1), in which you need a stream of _nonzero_
random bytes. The previous code just looped on random_byte, retrying
if it got a zero. Now I'm doing a much more interesting thing with an
mpint, essentially scaling a binary fraction repeatedly to extract a
number in the range [0,255) and then adding 1 to it.
2019-01-22 19:43:27 +00:00
|
|
|
random_read(s->session_key, 32);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Verify that the `bits' and `bytes' parameters match.
|
|
|
|
|
*/
|
|
|
|
|
if (s->hostkey.bits > s->hostkey.bytes * 8 ||
|
|
|
|
|
s->servkey.bits > s->servkey.bytes * 8) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "SSH-1 public keys were badly formatted");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
s->len = (s->hostkey.bytes > s->servkey.bytes ?
|
|
|
|
|
s->hostkey.bytes : s->servkey.bytes);
|
|
|
|
|
|
|
|
|
|
s->rsabuf = snewn(s->len, unsigned char);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Verify the host key.
|
|
|
|
|
*/
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* First format the key into a string.
|
|
|
|
|
*/
|
|
|
|
|
char *fingerprint;
|
2018-12-31 13:45:48 +00:00
|
|
|
char *keystr = rsastr_fmt(&s->hostkey);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
fingerprint = rsa_ssh1_fingerprint(&s->hostkey);
|
|
|
|
|
|
|
|
|
|
/* First check against manually configured host keys. */
|
|
|
|
|
s->dlgret = verify_ssh_manual_host_key(s->conf, fingerprint, NULL);
|
|
|
|
|
if (s->dlgret == 0) { /* did not match */
|
2018-12-30 13:16:28 +00:00
|
|
|
sfree(fingerprint);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
sfree(keystr);
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Host key did not appear in manually "
|
|
|
|
|
"configured list");
|
|
|
|
|
return;
|
|
|
|
|
} else if (s->dlgret < 0) { /* none configured; use standard handling */
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->dlgret = seat_verify_ssh_host_key(
|
|
|
|
|
s->ppl.seat, s->savedhost, s->savedport,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
"rsa", keystr, fingerprint, ssh1_login_dialog_callback, s);
|
2018-12-30 13:16:28 +00:00
|
|
|
sfree(fingerprint);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
sfree(keystr);
|
|
|
|
|
#ifdef FUZZING
|
|
|
|
|
s->dlgret = 1;
|
|
|
|
|
#endif
|
|
|
|
|
crMaybeWaitUntilV(s->dlgret >= 0);
|
|
|
|
|
|
|
|
|
|
if (s->dlgret == 0) {
|
|
|
|
|
ssh_user_close(s->ppl.ssh,
|
|
|
|
|
"User aborted at host key verification");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
} else {
|
2019-01-01 17:32:08 +00:00
|
|
|
sfree(fingerprint);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
sfree(keystr);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
|
|
|
s->rsabuf[i] = s->session_key[i];
|
|
|
|
|
if (i < 16)
|
|
|
|
|
s->rsabuf[i] ^= s->session_id[i];
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
{
|
2019-01-04 06:51:44 +00:00
|
|
|
RSAKey *smaller = (s->hostkey.bytes > s->servkey.bytes ?
|
|
|
|
|
&s->servkey : &s->hostkey);
|
|
|
|
|
RSAKey *larger = (s->hostkey.bytes > s->servkey.bytes ?
|
|
|
|
|
&s->hostkey : &s->servkey);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
if (!rsa_ssh1_encrypt(s->rsabuf, 32, smaller) ||
|
|
|
|
|
!rsa_ssh1_encrypt(s->rsabuf, smaller->bytes, larger)) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "SSH-1 public key encryptions failed "
|
|
|
|
|
"due to bad formatting");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Encrypted session key");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
{
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool cipher_chosen = false, warn = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
const char *cipher_string = NULL;
|
|
|
|
|
int i;
|
|
|
|
|
for (i = 0; !cipher_chosen && i < CIPHER_MAX; i++) {
|
|
|
|
|
int next_cipher = conf_get_int_int(
|
|
|
|
|
s->conf, CONF_ssh_cipherlist, i);
|
|
|
|
|
if (next_cipher == CIPHER_WARN) {
|
|
|
|
|
/* If/when we choose a cipher, warn about it */
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
warn = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else if (next_cipher == CIPHER_AES) {
|
|
|
|
|
/* XXX Probably don't need to mention this. */
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("AES not supported in SSH-1, skipping");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else {
|
|
|
|
|
switch (next_cipher) {
|
|
|
|
|
case CIPHER_3DES: s->cipher_type = SSH_CIPHER_3DES;
|
|
|
|
|
cipher_string = "3DES"; break;
|
|
|
|
|
case CIPHER_BLOWFISH: s->cipher_type = SSH_CIPHER_BLOWFISH;
|
|
|
|
|
cipher_string = "Blowfish"; break;
|
|
|
|
|
case CIPHER_DES: s->cipher_type = SSH_CIPHER_DES;
|
|
|
|
|
cipher_string = "single-DES"; break;
|
|
|
|
|
}
|
|
|
|
|
if (s->supported_ciphers_mask & (1 << s->cipher_type))
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
cipher_chosen = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (!cipher_chosen) {
|
|
|
|
|
if ((s->supported_ciphers_mask & (1 << SSH_CIPHER_3DES)) == 0) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Server violates SSH-1 protocol "
|
|
|
|
|
"by not supporting 3DES encryption");
|
|
|
|
|
} else {
|
|
|
|
|
/* shouldn't happen */
|
|
|
|
|
ssh_sw_abort(s->ppl.ssh, "No supported ciphers found");
|
|
|
|
|
}
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Warn about chosen cipher if necessary. */
|
|
|
|
|
if (warn) {
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->dlgret = seat_confirm_weak_crypto_primitive(
|
|
|
|
|
s->ppl.seat, "cipher", cipher_string,
|
|
|
|
|
ssh1_login_dialog_callback, s);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
crMaybeWaitUntilV(s->dlgret >= 0);
|
|
|
|
|
if (s->dlgret == 0) {
|
|
|
|
|
ssh_user_close(s->ppl.ssh, "User aborted at cipher warning");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch (s->cipher_type) {
|
|
|
|
|
case SSH_CIPHER_3DES:
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Using 3DES encryption");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
break;
|
|
|
|
|
case SSH_CIPHER_DES:
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Using single-DES encryption");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
break;
|
|
|
|
|
case SSH_CIPHER_BLOWFISH:
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Using Blowfish encryption");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_SESSION_KEY);
|
|
|
|
|
put_byte(pkt, s->cipher_type);
|
|
|
|
|
put_data(pkt, s->cookie, 8);
|
|
|
|
|
put_uint16(pkt, s->len * 8);
|
|
|
|
|
put_data(pkt, s->rsabuf, s->len);
|
|
|
|
|
put_uint32(pkt, s->local_protoflags);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Trying to enable encryption...");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
sfree(s->rsabuf);
|
|
|
|
|
s->rsabuf = NULL;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Force the BPP to synchronously marshal all packets up to and
|
|
|
|
|
* including the SESSION_KEY into wire format, before we turn on
|
|
|
|
|
* crypto.
|
|
|
|
|
*/
|
|
|
|
|
ssh_bpp_handle_output(s->ppl.bpp);
|
|
|
|
|
|
|
|
|
|
{
|
Merge the ssh1_cipher type into ssh2_cipher.
The aim of this reorganisation is to make it easier to test all the
ciphers in PuTTY in a uniform way. It was inconvenient that there were
two separate vtable systems for the ciphers used in SSH-1 and SSH-2
with different functionality.
Now there's only one type, called ssh_cipher. But really it's the old
ssh2_cipher, just renamed: I haven't made any changes to the API on
the SSH-2 side. Instead, I've removed ssh1_cipher completely, and
adapted the SSH-1 BPP to use the SSH-2 style API.
(The relevant differences are that ssh1_cipher encapsulated both the
sending and receiving directions in one object - so now ssh1bpp has to
make a separate cipher instance per direction - and that ssh1_cipher
automatically initialised the IV to all zeroes, which ssh1bpp now has
to do by hand.)
The previous ssh1_cipher vtable for single-DES has been removed
completely, because when converted into the new API it became
identical to the SSH-2 single-DES vtable; so now there's just one
vtable for DES-CBC which works in both protocols. The other two SSH-1
ciphers each had to stay separate, because 3DES is completely
different between SSH-1 and SSH-2 (three layers of CBC structure
versus one), and Blowfish varies in endianness and key length between
the two.
(Actually, while I'm here, I've only just noticed that the SSH-1
Blowfish cipher mis-describes itself in log messages as Blowfish-128.
In fact it passes the whole of the input key buffer, which has length
SSH1_SESSION_KEY_LENGTH == 32 bytes == 256 bits. So it's actually
Blowfish-256, and has been all along!)
2019-01-17 18:06:08 +00:00
|
|
|
const ssh_cipheralg *cipher =
|
|
|
|
|
(s->cipher_type == SSH_CIPHER_BLOWFISH ? &ssh_blowfish_ssh1 :
|
|
|
|
|
s->cipher_type == SSH_CIPHER_DES ? &ssh_des : &ssh_3des_ssh1);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
ssh1_bpp_new_cipher(s->ppl.bpp, cipher, s->session_key);
|
|
|
|
|
}
|
|
|
|
|
|
2018-12-14 19:42:47 +00:00
|
|
|
freersakey(&s->servkey);
|
|
|
|
|
freersakey(&s->hostkey);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s)) != NULL);
|
|
|
|
|
|
|
|
|
|
if (pktin->type != SSH1_SMSG_SUCCESS) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Encryption not successfully enabled");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Successfully started encryption");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
if ((s->username = get_remote_username(s->conf)) == NULL) {
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->cur_prompt = new_prompts();
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->to_server = true;
|
2019-03-09 15:50:23 +00:00
|
|
|
s->cur_prompt->from_server = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->cur_prompt->name = dupstr("SSH login name");
|
2018-10-29 19:50:29 +00:00
|
|
|
add_prompt(s->cur_prompt, dupstr("login as: "), true);
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->userpass_ret = seat_get_userpass_input(
|
|
|
|
|
s->ppl.seat, s->cur_prompt, NULL);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
while (1) {
|
|
|
|
|
while (s->userpass_ret < 0 &&
|
|
|
|
|
bufchain_size(s->ppl.user_input) > 0)
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->userpass_ret = seat_get_userpass_input(
|
|
|
|
|
s->ppl.seat, s->cur_prompt, s->ppl.user_input);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
if (s->userpass_ret >= 0)
|
|
|
|
|
break;
|
|
|
|
|
|
2018-10-29 19:50:29 +00:00
|
|
|
s->want_user_input = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
crReturnV;
|
2018-10-29 19:50:29 +00:00
|
|
|
s->want_user_input = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
if (!s->userpass_ret) {
|
|
|
|
|
/*
|
|
|
|
|
* Failed to get a username. Terminate.
|
|
|
|
|
*/
|
|
|
|
|
ssh_user_close(s->ppl.ssh, "No username provided");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
s->username = dupstr(s->cur_prompt->prompts[0]->result);
|
|
|
|
|
free_prompts(s->cur_prompt);
|
|
|
|
|
s->cur_prompt = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_USER);
|
|
|
|
|
put_stringz(pkt, s->username);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Sent username \"%s\"", s->username);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if ((flags & FLAG_VERBOSE) || (flags & FLAG_INTERACTIVE))
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Sent username \"%s\"\r\n", s->username);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s)) != NULL);
|
|
|
|
|
|
|
|
|
|
if (!(s->supported_auths_mask & (1 << SSH1_AUTH_RSA))) {
|
|
|
|
|
/* We must not attempt PK auth. Pretend we've already tried it. */
|
2018-10-29 19:50:29 +00:00
|
|
|
s->tried_publickey = s->tried_agent = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else {
|
2018-10-29 19:50:29 +00:00
|
|
|
s->tried_publickey = s->tried_agent = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
2018-10-29 19:50:29 +00:00
|
|
|
s->tis_auth_refused = s->ccard_auth_refused = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Load the public half of any configured keyfile for later use.
|
|
|
|
|
*/
|
|
|
|
|
s->keyfile = conf_get_filename(s->conf, CONF_keyfile);
|
|
|
|
|
if (!filename_is_null(s->keyfile)) {
|
|
|
|
|
int keytype;
|
2018-12-08 21:03:51 +00:00
|
|
|
ppl_logevent("Reading key file \"%s\"", filename_to_str(s->keyfile));
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
keytype = key_type(s->keyfile);
|
|
|
|
|
if (keytype == SSH_KEYTYPE_SSH1 ||
|
|
|
|
|
keytype == SSH_KEYTYPE_SSH1_PUBLIC) {
|
|
|
|
|
const char *error;
|
|
|
|
|
s->publickey_blob = strbuf_new();
|
|
|
|
|
if (rsa_ssh1_loadpub(s->keyfile,
|
|
|
|
|
BinarySink_UPCAST(s->publickey_blob),
|
|
|
|
|
&s->publickey_comment, &error)) {
|
|
|
|
|
s->privatekey_available = (keytype == SSH_KEYTYPE_SSH1);
|
|
|
|
|
if (!s->privatekey_available)
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Key file contains public key only");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->privatekey_encrypted = rsa_ssh1_encrypted(s->keyfile, NULL);
|
|
|
|
|
} else {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Unable to load key (%s)", error);
|
|
|
|
|
ppl_printf("Unable to load key file \"%s\" (%s)\r\n",
|
|
|
|
|
filename_to_str(s->keyfile), error);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
strbuf_free(s->publickey_blob);
|
|
|
|
|
s->publickey_blob = NULL;
|
|
|
|
|
}
|
|
|
|
|
} else {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Unable to use this key file (%s)",
|
|
|
|
|
key_type_to_str(keytype));
|
|
|
|
|
ppl_printf("Unable to use key file \"%s\" (%s)\r\n",
|
|
|
|
|
filename_to_str(s->keyfile),
|
|
|
|
|
key_type_to_str(keytype));
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Check whether we're configured to try Pageant, and also whether
|
|
|
|
|
* it's available. */
|
2018-10-29 19:57:31 +00:00
|
|
|
s->try_agent_auth = (conf_get_bool(s->conf, CONF_tryagent) &&
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
agent_exists());
|
|
|
|
|
|
|
|
|
|
while (pktin->type == SSH1_SMSG_FAILURE) {
|
|
|
|
|
s->pwpkt_type = SSH1_CMSG_AUTH_PASSWORD;
|
|
|
|
|
|
|
|
|
|
if (s->try_agent_auth && !s->tried_agent) {
|
|
|
|
|
/*
|
|
|
|
|
* Attempt RSA authentication using Pageant.
|
|
|
|
|
*/
|
2018-10-29 19:50:29 +00:00
|
|
|
s->authed = false;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
s->tried_agent = true;
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant is running. Requesting keys.");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
/* Request the keys held by the agent. */
|
|
|
|
|
{
|
|
|
|
|
strbuf *request = strbuf_new_for_agent_query();
|
|
|
|
|
put_byte(request, SSH1_AGENTC_REQUEST_RSA_IDENTITIES);
|
|
|
|
|
ssh1_login_agent_query(s, request);
|
|
|
|
|
strbuf_free(request);
|
|
|
|
|
crMaybeWaitUntilV(!s->auth_agent_query);
|
|
|
|
|
}
|
2019-02-06 20:47:18 +00:00
|
|
|
BinarySource_BARE_INIT_PL(s->asrc, s->agent_response);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
get_uint32(s->asrc); /* skip length field */
|
|
|
|
|
if (get_byte(s->asrc) == SSH1_AGENT_RSA_IDENTITIES_ANSWER) {
|
|
|
|
|
s->nkeys = toint(get_uint32(s->asrc));
|
|
|
|
|
if (s->nkeys < 0) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant reported negative key count %d",
|
|
|
|
|
s->nkeys);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->nkeys = 0;
|
|
|
|
|
}
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant has %d SSH-1 keys", s->nkeys);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
|
|
|
|
|
size_t start, end;
|
|
|
|
|
start = s->asrc->pos;
|
|
|
|
|
get_rsa_ssh1_pub(s->asrc, &s->key,
|
|
|
|
|
RSA_SSH1_EXPONENT_FIRST);
|
|
|
|
|
end = s->asrc->pos;
|
2019-01-20 16:42:58 +00:00
|
|
|
s->agent_comment->len = 0;
|
|
|
|
|
put_datapl(s->agent_comment, get_string(s->asrc));
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if (get_err(s->asrc)) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant key list packet was truncated");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
if (s->publickey_blob) {
|
|
|
|
|
ptrlen keystr = make_ptrlen(
|
|
|
|
|
(const char *)s->asrc->data + start, end - start);
|
|
|
|
|
|
|
|
|
|
if (keystr.len == s->publickey_blob->len &&
|
|
|
|
|
!memcmp(keystr.ptr, s->publickey_blob->s,
|
|
|
|
|
s->publickey_blob->len)) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant key #%d matches "
|
|
|
|
|
"configured key file", s->keyi);
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
s->tried_publickey = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else
|
|
|
|
|
/* Skip non-configured key */
|
|
|
|
|
continue;
|
|
|
|
|
}
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Trying Pageant key #%d", s->keyi);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_AUTH_RSA);
|
|
|
|
|
put_mp_ssh1(pkt, s->key.modulus);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s))
|
|
|
|
|
!= NULL);
|
|
|
|
|
if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Key refused");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
continue;
|
|
|
|
|
}
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Received RSA challenge");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->challenge = get_mp_ssh1(pktin);
|
|
|
|
|
if (get_err(pktin)) {
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
mp_free(s->challenge);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
ssh_proto_error(s->ppl.ssh, "Server's RSA challenge "
|
|
|
|
|
"was badly formatted");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
{
|
|
|
|
|
strbuf *agentreq;
|
|
|
|
|
const char *ret;
|
|
|
|
|
|
|
|
|
|
agentreq = strbuf_new_for_agent_query();
|
|
|
|
|
put_byte(agentreq, SSH1_AGENTC_RSA_CHALLENGE);
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
put_uint32(agentreq, mp_get_nbits(s->key.modulus));
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
put_mp_ssh1(agentreq, s->key.exponent);
|
|
|
|
|
put_mp_ssh1(agentreq, s->key.modulus);
|
|
|
|
|
put_mp_ssh1(agentreq, s->challenge);
|
|
|
|
|
put_data(agentreq, s->session_id, 16);
|
|
|
|
|
put_uint32(agentreq, 1); /* response format */
|
|
|
|
|
ssh1_login_agent_query(s, agentreq);
|
|
|
|
|
strbuf_free(agentreq);
|
|
|
|
|
crMaybeWaitUntilV(!s->auth_agent_query);
|
|
|
|
|
|
|
|
|
|
ret = s->agent_response.ptr;
|
|
|
|
|
if (ret) {
|
|
|
|
|
if (s->agent_response.len >= 5+16 &&
|
|
|
|
|
ret[4] == SSH1_AGENT_RSA_RESPONSE) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Sending Pageant's response");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
pkt = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_CMSG_AUTH_RSA_RESPONSE);
|
|
|
|
|
put_data(pkt, ret + 5, 16);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
crMaybeWaitUntilV(
|
|
|
|
|
(pktin = ssh1_login_pop(s))
|
|
|
|
|
!= NULL);
|
|
|
|
|
if (pktin->type == SSH1_SMSG_SUCCESS) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant's response "
|
|
|
|
|
"accepted");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if (flags & FLAG_VERBOSE) {
|
2019-01-20 16:42:58 +00:00
|
|
|
ptrlen comment = ptrlen_from_strbuf(
|
|
|
|
|
s->agent_comment);
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Authenticated using RSA "
|
|
|
|
|
"key \"%.*s\" from "
|
2019-01-20 16:42:58 +00:00
|
|
|
"agent\r\n",
|
|
|
|
|
PTRLEN_PRINTF(comment));
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
2018-10-29 19:50:29 +00:00
|
|
|
s->authed = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant's response not "
|
|
|
|
|
"accepted");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Pageant failed to answer "
|
|
|
|
|
"challenge");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
sfree((char *)ret);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("No reply received from Pageant");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
}
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
mp_free(s->key.exponent);
|
|
|
|
|
mp_free(s->key.modulus);
|
|
|
|
|
mp_free(s->challenge);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if (s->authed)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
sfree(s->agent_response_to_free);
|
|
|
|
|
s->agent_response_to_free = NULL;
|
|
|
|
|
if (s->publickey_blob && !s->tried_publickey)
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Configured key file not in Pageant");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Failed to get reply from Pageant");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
if (s->authed)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
if (s->publickey_blob && s->privatekey_available &&
|
|
|
|
|
!s->tried_publickey) {
|
|
|
|
|
/*
|
|
|
|
|
* Try public key authentication with the specified
|
|
|
|
|
* key file.
|
|
|
|
|
*/
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool got_passphrase; /* need not be kept over crReturn */
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if (flags & FLAG_VERBOSE)
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Trying public key authentication.\r\n");
|
|
|
|
|
ppl_logevent("Trying public key \"%s\"",
|
|
|
|
|
filename_to_str(s->keyfile));
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
s->tried_publickey = true;
|
2018-10-29 19:50:29 +00:00
|
|
|
got_passphrase = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
while (!got_passphrase) {
|
|
|
|
|
/*
|
|
|
|
|
* Get a passphrase, if necessary.
|
|
|
|
|
*/
|
|
|
|
|
int retd;
|
|
|
|
|
char *passphrase = NULL; /* only written after crReturn */
|
|
|
|
|
const char *error;
|
|
|
|
|
if (!s->privatekey_encrypted) {
|
|
|
|
|
if (flags & FLAG_VERBOSE)
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("No passphrase required.\r\n");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
passphrase = NULL;
|
|
|
|
|
} else {
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->cur_prompt = new_prompts(s->ppl.seat);
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->to_server = false;
|
2019-03-09 15:50:23 +00:00
|
|
|
s->cur_prompt->from_server = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->cur_prompt->name = dupstr("SSH key passphrase");
|
|
|
|
|
add_prompt(s->cur_prompt,
|
2018-12-08 21:03:51 +00:00
|
|
|
dupprintf("Passphrase for key \"%s\": ",
|
2018-10-29 19:50:29 +00:00
|
|
|
s->publickey_comment), false);
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->userpass_ret = seat_get_userpass_input(
|
|
|
|
|
s->ppl.seat, s->cur_prompt, NULL);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
while (1) {
|
|
|
|
|
while (s->userpass_ret < 0 &&
|
|
|
|
|
bufchain_size(s->ppl.user_input) > 0)
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->userpass_ret = seat_get_userpass_input(
|
|
|
|
|
s->ppl.seat, s->cur_prompt, s->ppl.user_input);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
if (s->userpass_ret >= 0)
|
|
|
|
|
break;
|
|
|
|
|
|
2018-10-29 19:50:29 +00:00
|
|
|
s->want_user_input = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
crReturnV;
|
2018-10-29 19:50:29 +00:00
|
|
|
s->want_user_input = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
if (!s->userpass_ret) {
|
|
|
|
|
/* Failed to get a passphrase. Terminate. */
|
2018-09-25 08:58:46 +01:00
|
|
|
ssh_user_close(s->ppl.ssh,
|
|
|
|
|
"User aborted at passphrase prompt");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
passphrase = dupstr(s->cur_prompt->prompts[0]->result);
|
|
|
|
|
free_prompts(s->cur_prompt);
|
|
|
|
|
s->cur_prompt = NULL;
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
* Try decrypting key with passphrase.
|
|
|
|
|
*/
|
|
|
|
|
retd = rsa_ssh1_loadkey(
|
|
|
|
|
s->keyfile, &s->key, passphrase, &error);
|
|
|
|
|
if (passphrase) {
|
|
|
|
|
smemclr(passphrase, strlen(passphrase));
|
|
|
|
|
sfree(passphrase);
|
|
|
|
|
}
|
|
|
|
|
if (retd == 1) {
|
|
|
|
|
/* Correct passphrase. */
|
2018-10-29 19:50:29 +00:00
|
|
|
got_passphrase = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else if (retd == 0) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Couldn't load private key from %s (%s).\r\n",
|
|
|
|
|
filename_to_str(s->keyfile), error);
|
2018-10-29 19:50:29 +00:00
|
|
|
got_passphrase = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
break; /* go and try something else */
|
|
|
|
|
} else if (retd == -1) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Wrong passphrase.\r\n");
|
2018-10-29 19:50:29 +00:00
|
|
|
got_passphrase = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
/* and try again */
|
|
|
|
|
} else {
|
2019-01-03 08:12:19 +00:00
|
|
|
unreachable("unexpected return from rsa_ssh1_loadkey()");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (got_passphrase) {
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Send a public key attempt.
|
|
|
|
|
*/
|
|
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_AUTH_RSA);
|
|
|
|
|
put_mp_ssh1(pkt, s->key.modulus);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s))
|
|
|
|
|
!= NULL);
|
|
|
|
|
if (pktin->type == SSH1_SMSG_FAILURE) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Server refused our public key.\r\n");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
continue; /* go and try something else */
|
|
|
|
|
}
|
|
|
|
|
if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet"
|
|
|
|
|
" in response to offer of public key, "
|
|
|
|
|
"type %d (%s)", pktin->type,
|
|
|
|
|
ssh1_pkt_type(pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
unsigned char buffer[32];
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
mp_int *challenge, *response;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
challenge = get_mp_ssh1(pktin);
|
|
|
|
|
if (get_err(pktin)) {
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
mp_free(challenge);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
ssh_proto_error(s->ppl.ssh, "Server's RSA challenge "
|
|
|
|
|
"was badly formatted");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
response = rsa_ssh1_decrypt(challenge, &s->key);
|
2018-12-14 19:42:47 +00:00
|
|
|
freersapriv(&s->key); /* burn the evidence */
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
for (i = 0; i < 32; i++) {
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
buffer[i] = mp_get_byte(response, 31 - i);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
{
|
2019-01-20 16:15:14 +00:00
|
|
|
ssh_hash *h = ssh_hash_new(&ssh_md5);
|
|
|
|
|
put_data(h, buffer, 32);
|
|
|
|
|
put_data(h, s->session_id, 16);
|
|
|
|
|
ssh_hash_final(h, buffer);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pkt = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_CMSG_AUTH_RSA_RESPONSE);
|
|
|
|
|
put_data(pkt, buffer, 16);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
|
Complete rewrite of PuTTY's bignum library.
The old 'Bignum' data type is gone completely, and so is sshbn.c. In
its place is a new thing called 'mp_int', handled by an entirely new
library module mpint.c, with API differences both large and small.
The main aim of this change is that the new library should be free of
timing- and cache-related side channels. I've written the code so that
it _should_ - assuming I haven't made any mistakes - do all of its
work without either control flow or memory addressing depending on the
data words of the input numbers. (Though, being an _arbitrary_
precision library, it does have to at least depend on the sizes of the
numbers - but there's a 'formal' size that can vary separately from
the actual magnitude of the represented integer, so if you want to
keep it secret that your number is actually small, it should work fine
to have a very long mp_int and just happen to store 23 in it.) So I've
done all my conditionalisation by means of computing both answers and
doing bit-masking to swap the right one into place, and all loops over
the words of an mp_int go up to the formal size rather than the actual
size.
I haven't actually tested the constant-time property in any rigorous
way yet (I'm still considering the best way to do it). But this code
is surely at the very least a big improvement on the old version, even
if I later find a few more things to fix.
I've also completely rewritten the low-level elliptic curve arithmetic
from sshecc.c; the new ecc.c is closer to being an adjunct of mpint.c
than it is to the SSH end of the code. The new elliptic curve code
keeps all coordinates in Montgomery-multiplication transformed form to
speed up all the multiplications mod the same prime, and only converts
them back when you ask for the affine coordinates. Also, I adopted
extended coordinates for the Edwards curve implementation.
sshecc.c has also had a near-total rewrite in the course of switching
it over to the new system. While I was there, I've separated ECDSA and
EdDSA more completely - they now have separate vtables, instead of a
single vtable in which nearly every function had a big if statement in
it - and also made the externally exposed types for an ECDSA key and
an ECDH context different.
A minor new feature: since the new arithmetic code includes a modular
square root function, we can now support the compressed point
representation for the NIST curves. We seem to have been getting along
fine without that so far, but it seemed a shame not to put it in,
since it was suddenly easy.
In sshrsa.c, one major change is that I've removed the RSA blinding
step in rsa_privkey_op, in which we randomise the ciphertext before
doing the decryption. The purpose of that was to avoid timing leaks
giving away the plaintext - but the new arithmetic code should take
that in its stride in the course of also being careful enough to avoid
leaking the _private key_, which RSA blinding had no way to do
anything about in any case.
Apart from those specific points, most of the rest of the changes are
more or less mechanical, just changing type names and translating code
into the new API.
2018-12-31 13:53:41 +00:00
|
|
|
mp_free(challenge);
|
|
|
|
|
mp_free(response);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s))
|
|
|
|
|
!= NULL);
|
|
|
|
|
if (pktin->type == SSH1_SMSG_FAILURE) {
|
|
|
|
|
if (flags & FLAG_VERBOSE)
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Failed to authenticate with"
|
|
|
|
|
" our public key.\r\n");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
continue; /* go and try something else */
|
|
|
|
|
} else if (pktin->type != SSH1_SMSG_SUCCESS) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet"
|
|
|
|
|
" in response to RSA authentication, "
|
|
|
|
|
"type %d (%s)", pktin->type,
|
|
|
|
|
ssh1_pkt_type(pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break; /* we're through! */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Otherwise, try various forms of password-like authentication.
|
|
|
|
|
*/
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->cur_prompt = new_prompts(s->ppl.seat);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
2018-10-29 19:57:31 +00:00
|
|
|
if (conf_get_bool(s->conf, CONF_try_tis_auth) &&
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
(s->supported_auths_mask & (1 << SSH1_AUTH_TIS)) &&
|
|
|
|
|
!s->tis_auth_refused) {
|
|
|
|
|
s->pwpkt_type = SSH1_CMSG_AUTH_TIS_RESPONSE;
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Requested TIS authentication");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_AUTH_TIS);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s)) != NULL);
|
|
|
|
|
if (pktin->type == SSH1_SMSG_FAILURE) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("TIS authentication declined");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if (flags & FLAG_INTERACTIVE)
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("TIS authentication refused.\r\n");
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
s->tis_auth_refused = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
continue;
|
|
|
|
|
} else if (pktin->type == SSH1_SMSG_AUTH_TIS_CHALLENGE) {
|
|
|
|
|
ptrlen challenge;
|
|
|
|
|
char *instr_suf, *prompt;
|
|
|
|
|
|
|
|
|
|
challenge = get_string(pktin);
|
|
|
|
|
if (get_err(pktin)) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "TIS challenge packet was "
|
|
|
|
|
"badly formed");
|
|
|
|
|
return;
|
|
|
|
|
}
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Received TIS challenge");
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->to_server = true;
|
2019-03-09 15:50:23 +00:00
|
|
|
s->cur_prompt->from_server = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->cur_prompt->name = dupstr("SSH TIS authentication");
|
|
|
|
|
/* Prompt heuristic comes from OpenSSH */
|
Fix two bugs in SSH-1 TIS and CryptoCard auth.
Firstly, these protocols had a display heuristic - credited to OpenSSH
in the comments - in which, if the challenge string contained a
newline, it was supposed to be printed with "Response: " on the next
line, whereas if it didn't, it would be taken as a prompt in its own
right. In fact, I had got the sense of memchr backwards, so each
behaviour was applying in the opposite case.
Secondly, apparently I'd never before tested against a server that
offered _both_ those methods, because when I tried it against Uppity
just now, I found that the setup and challenge phases for both methods
ran in immediate succession before prompting the user, which confused
the server completely. This is exactly why I wanted to have a server
implementation of everything PuTTY is supposed to speak the client
side of!
2018-10-22 20:34:17 +01:00
|
|
|
if (!memchr(challenge.ptr, '\n', challenge.len)) {
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
instr_suf = dupstr("");
|
|
|
|
|
prompt = mkstr(challenge);
|
|
|
|
|
} else {
|
|
|
|
|
instr_suf = mkstr(challenge);
|
|
|
|
|
prompt = dupstr("Response: ");
|
|
|
|
|
}
|
|
|
|
|
s->cur_prompt->instruction =
|
|
|
|
|
dupprintf("Using TIS authentication.%s%s",
|
|
|
|
|
(*instr_suf) ? "\n" : "",
|
|
|
|
|
instr_suf);
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->instr_reqd = true;
|
|
|
|
|
add_prompt(s->cur_prompt, prompt, false);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
sfree(instr_suf);
|
|
|
|
|
} else {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet"
|
|
|
|
|
" in response to TIS authentication, "
|
|
|
|
|
"type %d (%s)", pktin->type,
|
|
|
|
|
ssh1_pkt_type(pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
2018-10-29 19:57:31 +00:00
|
|
|
} else if (conf_get_bool(s->conf, CONF_try_tis_auth) &&
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
(s->supported_auths_mask & (1 << SSH1_AUTH_CCARD)) &&
|
|
|
|
|
!s->ccard_auth_refused) {
|
|
|
|
|
s->pwpkt_type = SSH1_CMSG_AUTH_CCARD_RESPONSE;
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Requested CryptoCard authentication");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_AUTH_CCARD);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s)) != NULL);
|
|
|
|
|
if (pktin->type == SSH1_SMSG_FAILURE) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("CryptoCard authentication declined");
|
|
|
|
|
ppl_printf("CryptoCard authentication refused.\r\n");
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
s->ccard_auth_refused = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
continue;
|
|
|
|
|
} else if (pktin->type == SSH1_SMSG_AUTH_CCARD_CHALLENGE) {
|
|
|
|
|
ptrlen challenge;
|
|
|
|
|
char *instr_suf, *prompt;
|
|
|
|
|
|
|
|
|
|
challenge = get_string(pktin);
|
|
|
|
|
if (get_err(pktin)) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "CryptoCard challenge packet "
|
|
|
|
|
"was badly formed");
|
|
|
|
|
return;
|
|
|
|
|
}
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Received CryptoCard challenge");
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->to_server = true;
|
2019-03-09 15:50:23 +00:00
|
|
|
s->cur_prompt->from_server = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->cur_prompt->name = dupstr("SSH CryptoCard authentication");
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->name_reqd = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
/* Prompt heuristic comes from OpenSSH */
|
Fix two bugs in SSH-1 TIS and CryptoCard auth.
Firstly, these protocols had a display heuristic - credited to OpenSSH
in the comments - in which, if the challenge string contained a
newline, it was supposed to be printed with "Response: " on the next
line, whereas if it didn't, it would be taken as a prompt in its own
right. In fact, I had got the sense of memchr backwards, so each
behaviour was applying in the opposite case.
Secondly, apparently I'd never before tested against a server that
offered _both_ those methods, because when I tried it against Uppity
just now, I found that the setup and challenge phases for both methods
ran in immediate succession before prompting the user, which confused
the server completely. This is exactly why I wanted to have a server
implementation of everything PuTTY is supposed to speak the client
side of!
2018-10-22 20:34:17 +01:00
|
|
|
if (!memchr(challenge.ptr, '\n', challenge.len)) {
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
instr_suf = dupstr("");
|
|
|
|
|
prompt = mkstr(challenge);
|
|
|
|
|
} else {
|
|
|
|
|
instr_suf = mkstr(challenge);
|
|
|
|
|
prompt = dupstr("Response: ");
|
|
|
|
|
}
|
|
|
|
|
s->cur_prompt->instruction =
|
|
|
|
|
dupprintf("Using CryptoCard authentication.%s%s",
|
|
|
|
|
(*instr_suf) ? "\n" : "",
|
|
|
|
|
instr_suf);
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->instr_reqd = true;
|
|
|
|
|
add_prompt(s->cur_prompt, prompt, false);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
sfree(instr_suf);
|
|
|
|
|
} else {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet"
|
|
|
|
|
" in response to TIS authentication, "
|
|
|
|
|
"type %d (%s)", pktin->type,
|
|
|
|
|
ssh1_pkt_type(pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
|
|
|
|
|
if ((s->supported_auths_mask & (1 << SSH1_AUTH_PASSWORD)) == 0) {
|
|
|
|
|
ssh_sw_abort(s->ppl.ssh, "No supported authentication methods "
|
|
|
|
|
"available");
|
|
|
|
|
return;
|
|
|
|
|
}
|
2018-10-29 19:50:29 +00:00
|
|
|
s->cur_prompt->to_server = true;
|
2019-03-09 15:50:23 +00:00
|
|
|
s->cur_prompt->from_server = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
s->cur_prompt->name = dupstr("SSH password");
|
|
|
|
|
add_prompt(s->cur_prompt, dupprintf("%s@%s's password: ",
|
|
|
|
|
s->username, s->savedhost),
|
2018-10-29 19:50:29 +00:00
|
|
|
false);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Show password prompt, having first obtained it via a TIS
|
|
|
|
|
* or CryptoCard exchange if we're doing TIS or CryptoCard
|
|
|
|
|
* authentication.
|
|
|
|
|
*/
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->userpass_ret = seat_get_userpass_input(
|
|
|
|
|
s->ppl.seat, s->cur_prompt, NULL);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
while (1) {
|
|
|
|
|
while (s->userpass_ret < 0 &&
|
|
|
|
|
bufchain_size(s->ppl.user_input) > 0)
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 19:58:42 +01:00
|
|
|
s->userpass_ret = seat_get_userpass_input(
|
|
|
|
|
s->ppl.seat, s->cur_prompt, s->ppl.user_input);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
if (s->userpass_ret >= 0)
|
|
|
|
|
break;
|
|
|
|
|
|
2018-10-29 19:50:29 +00:00
|
|
|
s->want_user_input = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
crReturnV;
|
2018-10-29 19:50:29 +00:00
|
|
|
s->want_user_input = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
if (!s->userpass_ret) {
|
|
|
|
|
/*
|
|
|
|
|
* Failed to get a password (for example
|
|
|
|
|
* because one was supplied on the command line
|
|
|
|
|
* which has already failed to work). Terminate.
|
|
|
|
|
*/
|
2018-09-25 08:58:46 +01:00
|
|
|
ssh_user_close(s->ppl.ssh, "User aborted at password prompt");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
|
|
|
|
|
/*
|
|
|
|
|
* Defence against traffic analysis: we send a
|
|
|
|
|
* whole bunch of packets containing strings of
|
|
|
|
|
* different lengths. One of these strings is the
|
|
|
|
|
* password, in a SSH1_CMSG_AUTH_PASSWORD packet.
|
|
|
|
|
* The others are all random data in
|
|
|
|
|
* SSH1_MSG_IGNORE packets. This way a passive
|
|
|
|
|
* listener can't tell which is the password, and
|
|
|
|
|
* hence can't deduce the password length.
|
|
|
|
|
*
|
|
|
|
|
* Anybody with a password length greater than 16
|
|
|
|
|
* bytes is going to have enough entropy in their
|
|
|
|
|
* password that a listener won't find it _that_
|
|
|
|
|
* much help to know how long it is. So what we'll
|
|
|
|
|
* do is:
|
|
|
|
|
*
|
|
|
|
|
* - if password length < 16, we send 15 packets
|
|
|
|
|
* containing string lengths 1 through 15
|
|
|
|
|
*
|
|
|
|
|
* - otherwise, we let N be the nearest multiple
|
|
|
|
|
* of 8 below the password length, and send 8
|
|
|
|
|
* packets containing string lengths N through
|
|
|
|
|
* N+7. This won't obscure the order of
|
|
|
|
|
* magnitude of the password length, but it will
|
|
|
|
|
* introduce a bit of extra uncertainty.
|
|
|
|
|
*
|
|
|
|
|
* A few servers can't deal with SSH1_MSG_IGNORE, at
|
|
|
|
|
* least in this context. For these servers, we need
|
|
|
|
|
* an alternative defence. We make use of the fact
|
|
|
|
|
* that the password is interpreted as a C string:
|
|
|
|
|
* so we can append a NUL, then some random data.
|
|
|
|
|
*
|
|
|
|
|
* A few servers can deal with neither SSH1_MSG_IGNORE
|
|
|
|
|
* here _nor_ a padded password string.
|
|
|
|
|
* For these servers we are left with no defences
|
|
|
|
|
* against password length sniffing.
|
|
|
|
|
*/
|
|
|
|
|
if (!(s->ppl.remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE) &&
|
|
|
|
|
!(s->ppl.remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
|
|
|
|
|
/*
|
|
|
|
|
* The server can deal with SSH1_MSG_IGNORE, so
|
|
|
|
|
* we can use the primary defence.
|
|
|
|
|
*/
|
|
|
|
|
int bottom, top, pwlen, i;
|
|
|
|
|
|
|
|
|
|
pwlen = strlen(s->cur_prompt->prompts[0]->result);
|
|
|
|
|
if (pwlen < 16) {
|
|
|
|
|
bottom = 0; /* zero length passwords are OK! :-) */
|
|
|
|
|
top = 15;
|
|
|
|
|
} else {
|
|
|
|
|
bottom = pwlen & ~7;
|
|
|
|
|
top = bottom + 7;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
assert(pwlen >= bottom && pwlen <= top);
|
|
|
|
|
|
|
|
|
|
for (i = bottom; i <= top; i++) {
|
|
|
|
|
if (i == pwlen) {
|
|
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, s->pwpkt_type);
|
|
|
|
|
put_stringz(pkt, s->cur_prompt->prompts[0]->result);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
} else {
|
2019-03-01 19:28:00 +00:00
|
|
|
strbuf *random_data = strbuf_new_nm();
|
Replace random_byte() with random_read().
This is in preparation for a PRNG revamp which will want to have a
well defined boundary for any given request-for-randomness, so that it
can destroy the evidence afterwards. So no more looping round calling
random_byte() and then stopping when we feel like it: now you say up
front how many random bytes you want, and call random_read() which
gives you that many in one go.
Most of the call sites that had to be fixed are fairly mechanical, and
quite a few ended up more concise afterwards. A few became more
cumbersome, such as mp_random_bits, in which the new API doesn't let
me load the random bytes directly into the target integer without
triggering undefined behaviour, so instead I have to allocate a
separate temporary buffer.
The _most_ interesting call site was in the PKCS#1 v1.5 padding code
in sshrsa.c (used in SSH-1), in which you need a stream of _nonzero_
random bytes. The previous code just looped on random_byte, retrying
if it got a zero. Now I'm doing a much more interesting thing with an
mpint, essentially scaling a binary fraction repeatedly to extract a
number in the range [0,255) and then adding 1 to it.
2019-01-22 19:43:27 +00:00
|
|
|
random_read(strbuf_append(random_data, i), i);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
|
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_MSG_IGNORE);
|
|
|
|
|
put_stringsb(pkt, random_data);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
}
|
|
|
|
|
}
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Sending password with camouflage packets");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
}
|
|
|
|
|
else if (!(s->ppl.remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
|
|
|
|
|
/*
|
|
|
|
|
* The server can't deal with SSH1_MSG_IGNORE
|
|
|
|
|
* but can deal with padded passwords, so we
|
|
|
|
|
* can use the secondary defence.
|
|
|
|
|
*/
|
2019-03-01 19:28:00 +00:00
|
|
|
strbuf *padded_pw = strbuf_new_nm();
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Sending length-padded password");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, s->pwpkt_type);
|
|
|
|
|
put_asciz(padded_pw, s->cur_prompt->prompts[0]->result);
|
Replace random_byte() with random_read().
This is in preparation for a PRNG revamp which will want to have a
well defined boundary for any given request-for-randomness, so that it
can destroy the evidence afterwards. So no more looping round calling
random_byte() and then stopping when we feel like it: now you say up
front how many random bytes you want, and call random_read() which
gives you that many in one go.
Most of the call sites that had to be fixed are fairly mechanical, and
quite a few ended up more concise afterwards. A few became more
cumbersome, such as mp_random_bits, in which the new API doesn't let
me load the random bytes directly into the target integer without
triggering undefined behaviour, so instead I have to allocate a
separate temporary buffer.
The _most_ interesting call site was in the PKCS#1 v1.5 padding code
in sshrsa.c (used in SSH-1), in which you need a stream of _nonzero_
random bytes. The previous code just looped on random_byte, retrying
if it got a zero. Now I'm doing a much more interesting thing with an
mpint, essentially scaling a binary fraction repeatedly to extract a
number in the range [0,255) and then adding 1 to it.
2019-01-22 19:43:27 +00:00
|
|
|
size_t pad = 63 & -padded_pw->len;
|
|
|
|
|
random_read(strbuf_append(padded_pw, pad), pad);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
put_stringsb(pkt, padded_pw);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
} else {
|
|
|
|
|
/*
|
|
|
|
|
* The server is believed unable to cope with
|
|
|
|
|
* any of our password camouflage methods.
|
|
|
|
|
*/
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Sending unpadded password");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, s->pwpkt_type);
|
|
|
|
|
put_stringz(pkt, s->cur_prompt->prompts[0]->result);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, s->pwpkt_type);
|
|
|
|
|
put_stringz(pkt, s->cur_prompt->prompts[0]->result);
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
}
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Sent password");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
free_prompts(s->cur_prompt);
|
|
|
|
|
s->cur_prompt = NULL;
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s)) != NULL);
|
|
|
|
|
if (pktin->type == SSH1_SMSG_FAILURE) {
|
|
|
|
|
if (flags & FLAG_VERBOSE)
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_printf("Access denied\r\n");
|
|
|
|
|
ppl_logevent("Authentication refused");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else if (pktin->type != SSH1_SMSG_SUCCESS) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet"
|
|
|
|
|
" in response to password authentication, type %d "
|
|
|
|
|
"(%s)", pktin->type, ssh1_pkt_type(pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Authentication successful");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
|
2018-10-29 19:57:31 +00:00
|
|
|
if (conf_get_bool(s->conf, CONF_compression)) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Requesting compression");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
pkt = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_REQUEST_COMPRESSION);
|
|
|
|
|
put_uint32(pkt, 6); /* gzip compression level */
|
|
|
|
|
pq_push(s->ppl.out_pq, pkt);
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh1_login_pop(s)) != NULL);
|
|
|
|
|
if (pktin->type == SSH1_SMSG_SUCCESS) {
|
|
|
|
|
/*
|
|
|
|
|
* We don't have to actually do anything here: the SSH-1
|
|
|
|
|
* BPP will take care of automatically starting the
|
|
|
|
|
* compression, by recognising our outgoing request packet
|
|
|
|
|
* and the success response. (Horrible, but it's the
|
|
|
|
|
* easiest way to avoid race conditions if other packets
|
|
|
|
|
* cross in transit.)
|
|
|
|
|
*/
|
|
|
|
|
} else if (pktin->type == SSH1_SMSG_FAILURE) {
|
Start using C99 variadic macros.
In the past, I've had a lot of macros which you call with double
parentheses, along the lines of debug(("format string", params)), so
that the inner parens protect the commas and permit the macro to treat
the whole printf-style argument list as one macro argument.
That's all very well, but it's a bit inconvenient (it doesn't leave
you any way to implement such a macro by prepending another argument
to the list), and now this code base's rules allow C99isms, I can
switch all those macros to using a single pair of parens, using the
C99 ability to say '...' in the parameter list of the #define and get
at the corresponding suffix of the arguments as __VA_ARGS__.
So I'm doing it. I've made the following printf-style macros variadic:
bpp_logevent, ppl_logevent, ppl_printf and debug.
While I'm here, I've also fixed up a collection of conditioned-out
calls to debug() in the Windows front end which were clearly expecting
a macro with a different calling syntax, because they had an integer
parameter first. If I ever have a need to condition those back in,
they should actually work now.
2018-12-08 20:32:31 +00:00
|
|
|
ppl_logevent("Server refused to enable compression");
|
|
|
|
|
ppl_printf("Server refused to compress\r\n");
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
} else {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet"
|
|
|
|
|
" in response to compression request, type %d "
|
|
|
|
|
"(%s)", pktin->type, ssh1_pkt_type(pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-20 22:09:54 +01:00
|
|
|
ssh1_connection_set_protoflags(
|
|
|
|
|
s->successor_layer, s->local_protoflags, s->remote_protoflags);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
{
|
|
|
|
|
PacketProtocolLayer *successor = s->successor_layer;
|
|
|
|
|
s->successor_layer = NULL; /* avoid freeing it ourself */
|
|
|
|
|
ssh_ppl_replace(&s->ppl, successor);
|
|
|
|
|
return; /* we've just freed s, so avoid even touching s->crState */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
crFinishV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_dialog_callback(void *loginv, int ret)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_login_state *s = (struct ssh1_login_state *)loginv;
|
|
|
|
|
s->dlgret = ret;
|
|
|
|
|
ssh_ppl_process_queue(&s->ppl);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_agent_query(struct ssh1_login_state *s, strbuf *req)
|
|
|
|
|
{
|
|
|
|
|
void *response;
|
|
|
|
|
int response_len;
|
|
|
|
|
|
|
|
|
|
sfree(s->agent_response_to_free);
|
|
|
|
|
s->agent_response_to_free = NULL;
|
|
|
|
|
|
|
|
|
|
s->auth_agent_query = agent_query(req, &response, &response_len,
|
|
|
|
|
ssh1_login_agent_callback, s);
|
|
|
|
|
if (!s->auth_agent_query)
|
|
|
|
|
ssh1_login_agent_callback(s, response, response_len);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_agent_callback(void *loginv, void *reply, int replylen)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_login_state *s = (struct ssh1_login_state *)loginv;
|
|
|
|
|
|
|
|
|
|
s->auth_agent_query = NULL;
|
|
|
|
|
s->agent_response_to_free = reply;
|
|
|
|
|
s->agent_response = make_ptrlen(reply, replylen);
|
|
|
|
|
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_special_cmd(PacketProtocolLayer *ppl,
|
|
|
|
|
SessionSpecialCode code, int arg)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_login_state *s =
|
2018-10-05 23:49:08 +01:00
|
|
|
container_of(ppl, struct ssh1_login_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
if (code == SS_PING || code == SS_NOP) {
|
|
|
|
|
if (!(s->ppl.remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE)) {
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_MSG_IGNORE);
|
|
|
|
|
put_stringz(pktout, "");
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
static bool ssh1_login_want_user_input(PacketProtocolLayer *ppl)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
{
|
|
|
|
|
struct ssh1_login_state *s =
|
2018-10-05 23:49:08 +01:00
|
|
|
container_of(ppl, struct ssh1_login_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
return s->want_user_input;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_got_user_input(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_login_state *s =
|
2018-10-05 23:49:08 +01:00
|
|
|
container_of(ppl, struct ssh1_login_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
if (s->want_user_input)
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_login_reconfigure(PacketProtocolLayer *ppl, Conf *conf)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_login_state *s =
|
2018-10-05 23:49:08 +01:00
|
|
|
container_of(ppl, struct ssh1_login_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 18:28:16 +01:00
|
|
|
ssh_ppl_reconfigure(s->successor_layer, conf);
|
|
|
|
|
}
|