Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
/*
|
2022-01-22 15:38:53 +00:00
|
|
|
* main-gtk-simple.c: the common main-program code between the
|
|
|
|
|
* straight-up Unix PuTTY and pterm, which they do not share with the
|
|
|
|
|
* multi-session main-gtk-application.c.
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define _GNU_SOURCE
|
|
|
|
|
|
|
|
|
|
#include <string.h>
|
|
|
|
|
#include <assert.h>
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
|
#include <string.h>
|
|
|
|
|
#include <signal.h>
|
|
|
|
|
#include <stdio.h>
|
|
|
|
|
#include <time.h>
|
|
|
|
|
#include <errno.h>
|
|
|
|
|
#include <locale.h>
|
|
|
|
|
#include <fcntl.h>
|
|
|
|
|
#include <unistd.h>
|
|
|
|
|
#include <sys/types.h>
|
|
|
|
|
#include <sys/wait.h>
|
|
|
|
|
#include <gtk/gtk.h>
|
|
|
|
|
#if !GTK_CHECK_VERSION(3,0,0)
|
|
|
|
|
#include <gdk/gdkkeysyms.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if GTK_CHECK_VERSION(2,0,0)
|
|
|
|
|
#include <gtk/gtkimmodule.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define MAY_REFER_TO_GTK_IN_HEADERS
|
|
|
|
|
|
|
|
|
|
#include "putty.h"
|
|
|
|
|
#include "terminal.h"
|
|
|
|
|
#include "gtkcompat.h"
|
2021-04-23 05:19:05 +00:00
|
|
|
#include "unifont.h"
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
#include "gtkmisc.h"
|
|
|
|
|
|
|
|
|
|
#ifndef NOT_X_WINDOWS
|
|
|
|
|
#include <gdk/gdkx.h>
|
|
|
|
|
#include <X11/Xlib.h>
|
|
|
|
|
#include <X11/Xutil.h>
|
|
|
|
|
#include <X11/Xatom.h>
|
Basic support for running under GDK Wayland back end.
GTK 3 PuTTY/pterm has always assumed that if it was compiled with
_support_ for talking to the raw X11 layer underneath GTK and GDK,
then it was entitled to expect that raw X11 layer to exist at all
times, i.e. that GDK_DISPLAY_XDISPLAY would return a meaningful X
display that it could do useful things with. So if you ran it over the
GDK Wayland backend, it would immediately segfault.
Modern GTK applications need to cope with multiple GDK backends at run
time. It's fine for GTK PuTTY to _contain_ the code to find and use
underlying X11 primitives like the display and the X window id, but it
should be prepared to find that it's running on Wayland (or something
else again!) so those functions don't return anything useful - in
which case it should degrade gracefully to the subset of functionality
that can be accessed through backend-independent GTK calls.
Accordingly, I've centralised the use of GDK_DISPLAY_XDISPLAY into a
support function get_x_display() in gtkmisc.c, which starts by
checking that there actually is one first. All previous direct uses of
GDK_*_XDISPLAY now go via that function, and check the result for NULL
afterwards. (To save faffing about calling that function too many
times, I'm also caching the display pointer in more places, and
passing it as an extra argument to various subfunctions, mostly in
gtkfont.c.)
Similarly, the get_windowid() function that retrieves the window id to
put in the environment of pterm's child process has to be prepared for
there not to be a window id.
This isn't a complete fix for all Wayland-related problems. The other
one I'm currently aware of is that the default font is "server:fixed",
which is a bad default now that it won't be available on all backends.
And I expect that further problems will show up with more testing. But
it's a start.
2018-05-09 08:18:20 +00:00
|
|
|
#include "x11misc.h"
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static char *progname, **gtkargvstart;
|
|
|
|
|
static int ngtkargs;
|
|
|
|
|
|
|
|
|
|
static const char *app_name = "pterm";
|
|
|
|
|
|
|
|
|
|
char *x_get_default(const char *key)
|
|
|
|
|
{
|
|
|
|
|
#ifndef NOT_X_WINDOWS
|
Basic support for running under GDK Wayland back end.
GTK 3 PuTTY/pterm has always assumed that if it was compiled with
_support_ for talking to the raw X11 layer underneath GTK and GDK,
then it was entitled to expect that raw X11 layer to exist at all
times, i.e. that GDK_DISPLAY_XDISPLAY would return a meaningful X
display that it could do useful things with. So if you ran it over the
GDK Wayland backend, it would immediately segfault.
Modern GTK applications need to cope with multiple GDK backends at run
time. It's fine for GTK PuTTY to _contain_ the code to find and use
underlying X11 primitives like the display and the X window id, but it
should be prepared to find that it's running on Wayland (or something
else again!) so those functions don't return anything useful - in
which case it should degrade gracefully to the subset of functionality
that can be accessed through backend-independent GTK calls.
Accordingly, I've centralised the use of GDK_DISPLAY_XDISPLAY into a
support function get_x_display() in gtkmisc.c, which starts by
checking that there actually is one first. All previous direct uses of
GDK_*_XDISPLAY now go via that function, and check the result for NULL
afterwards. (To save faffing about calling that function too many
times, I'm also caching the display pointer in more places, and
passing it as an extra argument to various subfunctions, mostly in
gtkfont.c.)
Similarly, the get_windowid() function that retrieves the window id to
put in the environment of pterm's child process has to be prepared for
there not to be a window id.
This isn't a complete fix for all Wayland-related problems. The other
one I'm currently aware of is that the default font is "server:fixed",
which is a bad default now that it won't be available on all backends.
And I expect that further problems will show up with more testing. But
it's a start.
2018-05-09 08:18:20 +00:00
|
|
|
Display *disp;
|
|
|
|
|
if ((disp = get_x11_display()) == NULL)
|
|
|
|
|
return NULL;
|
|
|
|
|
return XGetDefault(disp, app_name, key);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
#else
|
|
|
|
|
return NULL;
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void fork_and_exec_self(int fd_to_close, ...)
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* Re-execing ourself is not an exact science under Unix. I do
|
|
|
|
|
* the best I can by using /proc/self/exe if available and by
|
|
|
|
|
* assuming argv[0] can be found on $PATH if not.
|
2019-09-08 19:29:00 +00:00
|
|
|
*
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
* Note that we also have to reconstruct the elements of the
|
|
|
|
|
* original argv which gtk swallowed, since the user wants the
|
|
|
|
|
* new session to appear on the same X display as the old one.
|
|
|
|
|
*/
|
|
|
|
|
char **args;
|
|
|
|
|
va_list ap;
|
|
|
|
|
int i, n;
|
|
|
|
|
int pid;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Collect the arguments with which to re-exec ourself.
|
|
|
|
|
*/
|
|
|
|
|
va_start(ap, fd_to_close);
|
2019-09-08 19:29:00 +00:00
|
|
|
n = 2; /* progname and terminating NULL */
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
n += ngtkargs;
|
|
|
|
|
while (va_arg(ap, char *) != NULL)
|
2019-09-08 19:29:00 +00:00
|
|
|
n++;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
va_end(ap);
|
|
|
|
|
|
|
|
|
|
args = snewn(n, char *);
|
|
|
|
|
args[0] = progname;
|
|
|
|
|
args[n-1] = NULL;
|
|
|
|
|
for (i = 0; i < ngtkargs; i++)
|
2019-09-08 19:29:00 +00:00
|
|
|
args[i+1] = gtkargvstart[i];
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
i++;
|
|
|
|
|
va_start(ap, fd_to_close);
|
|
|
|
|
while ((args[i++] = va_arg(ap, char *)) != NULL);
|
|
|
|
|
va_end(ap);
|
|
|
|
|
|
|
|
|
|
assert(i == n);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Do the double fork.
|
|
|
|
|
*/
|
|
|
|
|
pid = fork();
|
|
|
|
|
if (pid < 0) {
|
2019-09-08 19:29:00 +00:00
|
|
|
perror("fork");
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
sfree(args);
|
2019-09-08 19:29:00 +00:00
|
|
|
return;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (pid == 0) {
|
2019-09-08 19:29:00 +00:00
|
|
|
int pid2 = fork();
|
|
|
|
|
if (pid2 < 0) {
|
|
|
|
|
perror("fork");
|
|
|
|
|
_exit(1);
|
|
|
|
|
} else if (pid2 > 0) {
|
|
|
|
|
/*
|
|
|
|
|
* First child has successfully forked second child. My
|
|
|
|
|
* Work Here Is Done. Note the use of _exit rather than
|
|
|
|
|
* exit: the latter appears to cause destroy messages
|
|
|
|
|
* to be sent to the X server. I suspect gtk uses
|
|
|
|
|
* atexit.
|
|
|
|
|
*/
|
|
|
|
|
_exit(0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If we reach here, we are the second child, so we now
|
|
|
|
|
* actually perform the exec.
|
|
|
|
|
*/
|
|
|
|
|
if (fd_to_close >= 0)
|
|
|
|
|
close(fd_to_close);
|
|
|
|
|
|
|
|
|
|
execv("/proc/self/exe", args);
|
|
|
|
|
execvp(progname, args);
|
|
|
|
|
perror("exec");
|
|
|
|
|
_exit(127);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
} else {
|
2019-09-08 19:29:00 +00:00
|
|
|
int status;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
sfree(args);
|
2019-09-08 19:29:00 +00:00
|
|
|
waitpid(pid, &status, 0);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void launch_duplicate_session(Conf *conf)
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* For this feature we must marshal conf and (possibly) pty_argv
|
|
|
|
|
* into a byte stream, create a pipe, and send this byte stream
|
|
|
|
|
* to the child through the pipe.
|
|
|
|
|
*/
|
2018-05-24 09:48:20 +00:00
|
|
|
int i, ret;
|
|
|
|
|
strbuf *serialised;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
char option[80];
|
|
|
|
|
int pipefd[2];
|
|
|
|
|
|
|
|
|
|
if (pipe(pipefd) < 0) {
|
2019-09-08 19:29:00 +00:00
|
|
|
perror("pipe");
|
|
|
|
|
return;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
2018-05-24 09:48:20 +00:00
|
|
|
serialised = strbuf_new();
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2018-05-24 09:48:20 +00:00
|
|
|
conf_serialise(BinarySink_UPCAST(serialised), conf);
|
|
|
|
|
if (use_pty_argv && pty_argv)
|
2019-09-08 19:29:00 +00:00
|
|
|
for (i = 0; pty_argv[i]; i++)
|
2018-05-24 09:48:20 +00:00
|
|
|
put_asciz(serialised, pty_argv[i]);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
New array-growing macros: sgrowarray and sgrowarrayn.
The idea of these is that they centralise the common idiom along the
lines of
if (logical_array_len >= physical_array_size) {
physical_array_size = logical_array_len * 5 / 4 + 256;
array = sresize(array, physical_array_size, ElementType);
}
which happens at a zillion call sites throughout this code base, with
different random choices of the geometric factor and additive
constant, sometimes forgetting them completely, and generally doing a
lot of repeated work.
The new macro sgrowarray(array,size,n) has the semantics: here are the
array pointer and its physical size for you to modify, now please
ensure that the nth element exists, so I can write into it. And
sgrowarrayn(array,size,n,m) is the same except that it ensures that
the array has size at least n+m (so sgrowarray is just the special
case where m=1).
Now that this is a single centralised implementation that will be used
everywhere, I've also gone to more effort in the implementation, with
careful overflow checks that would have been painful to put at all the
previous call sites.
This commit also switches over every use of sresize(), apart from a
few where I really didn't think it would gain anything. A consequence
of that is that a lot of array-size variables have to have their types
changed to size_t, because the macros require that (they address-take
the size to pass to the underlying function).
2019-02-28 20:07:30 +00:00
|
|
|
sprintf(option, "---[%d,%zu]", pipefd[0], serialised->len);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
noncloexec(pipefd[0]);
|
|
|
|
|
fork_and_exec_self(pipefd[1], option, NULL);
|
|
|
|
|
close(pipefd[0]);
|
|
|
|
|
|
|
|
|
|
i = ret = 0;
|
2018-05-24 09:48:20 +00:00
|
|
|
while (i < serialised->len &&
|
|
|
|
|
(ret = write(pipefd[1], serialised->s + i,
|
|
|
|
|
serialised->len - i)) > 0)
|
2019-09-08 19:29:00 +00:00
|
|
|
i += ret;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
if (ret < 0)
|
2019-09-08 19:29:00 +00:00
|
|
|
perror("write to pipe");
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
close(pipefd[1]);
|
2018-05-24 09:48:20 +00:00
|
|
|
strbuf_free(serialised);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void launch_new_session(void)
|
|
|
|
|
{
|
|
|
|
|
fork_and_exec_self(-1, NULL);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void launch_saved_session(const char *str)
|
|
|
|
|
{
|
|
|
|
|
fork_and_exec_self(-1, "-load", str, NULL);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int read_dupsession_data(Conf *conf, char *arg)
|
|
|
|
|
{
|
2018-05-28 14:36:15 +00:00
|
|
|
int fd, i, ret, size;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
char *data;
|
2018-05-28 14:36:15 +00:00
|
|
|
BinarySource src[1];
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
if (sscanf(arg, "---[%d,%d]", &fd, &size) != 2) {
|
2019-09-08 19:29:00 +00:00
|
|
|
fprintf(stderr, "%s: malformed magic argument `%s'\n", appname, arg);
|
|
|
|
|
exit(1);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
data = snewn(size, char);
|
|
|
|
|
i = ret = 0;
|
|
|
|
|
while (i < size && (ret = read(fd, data + i, size - i)) > 0)
|
2019-09-08 19:29:00 +00:00
|
|
|
i += ret;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
if (ret < 0) {
|
2019-09-08 19:29:00 +00:00
|
|
|
perror("read from pipe");
|
|
|
|
|
exit(1);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
} else if (i < size) {
|
2019-09-08 19:29:00 +00:00
|
|
|
fprintf(stderr, "%s: unexpected EOF in Duplicate Session data\n",
|
|
|
|
|
appname);
|
|
|
|
|
exit(1);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
2018-05-28 14:36:15 +00:00
|
|
|
BinarySource_BARE_INIT(src, data, size);
|
|
|
|
|
if (!conf_deserialise(conf, src)) {
|
|
|
|
|
fprintf(stderr, "%s: malformed Duplicate Session data\n", appname);
|
|
|
|
|
exit(1);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
2018-05-28 14:36:15 +00:00
|
|
|
if (use_pty_argv) {
|
2019-09-08 19:29:00 +00:00
|
|
|
int pty_argc = 0;
|
2018-05-28 14:36:15 +00:00
|
|
|
size_t argv_startpos = src->pos;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2018-05-28 14:36:15 +00:00
|
|
|
while (get_asciz(src), !get_err(src))
|
|
|
|
|
pty_argc++;
|
|
|
|
|
|
|
|
|
|
src->err = BSE_NO_ERROR;
|
|
|
|
|
|
|
|
|
|
if (pty_argc > 0) {
|
|
|
|
|
src->pos = argv_startpos;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2018-05-28 14:36:15 +00:00
|
|
|
pty_argv = snewn(pty_argc + 1, char *);
|
|
|
|
|
pty_argv[pty_argc] = NULL;
|
|
|
|
|
for (i = 0; i < pty_argc; i++)
|
|
|
|
|
pty_argv[i] = dupstr(get_asciz(src));
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (get_err(src) || get_avail(src) > 0) {
|
|
|
|
|
fprintf(stderr, "%s: malformed Duplicate Session data\n", appname);
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
sfree(data);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void help(FILE *fp) {
|
2022-12-28 15:32:24 +00:00
|
|
|
if (fprintf(fp,
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
"pterm option summary:\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" --display DISPLAY Specify X display to use (note '--')\n"
|
|
|
|
|
" -name PREFIX Prefix when looking up resources (default: pterm)\n"
|
|
|
|
|
" -fn FONT Normal text font\n"
|
|
|
|
|
" -fb FONT Bold text font\n"
|
|
|
|
|
" -geometry GEOMETRY Position and size of window (size in characters)\n"
|
|
|
|
|
" -sl LINES Number of lines of scrollback\n"
|
|
|
|
|
" -fg COLOUR, -bg COLOUR Foreground/background colour\n"
|
|
|
|
|
" -bfg COLOUR, -bbg COLOUR Foreground/background bold colour\n"
|
|
|
|
|
" -cfg COLOUR, -bfg COLOUR Foreground/background cursor colour\n"
|
|
|
|
|
" -T TITLE Window title\n"
|
|
|
|
|
" -ut, +ut Do(default) or do not update utmp\n"
|
|
|
|
|
" -ls, +ls Do(default) or do not make shell a login shell\n"
|
|
|
|
|
" -sb, +sb Do(default) or do not display a scrollbar\n"
|
|
|
|
|
" -log PATH, -sessionlog PATH Log all output to a file\n"
|
|
|
|
|
" -nethack Map numeric keypad to hjklyubn direction keys\n"
|
|
|
|
|
" -xrm RESOURCE-STRING Set an X resource\n"
|
|
|
|
|
" -e COMMAND [ARGS...] Execute command (consumes all remaining args)\n"
|
2019-09-08 19:29:00 +00:00
|
|
|
) < 0 || fflush(fp) < 0) {
|
|
|
|
|
perror("output error");
|
|
|
|
|
exit(1);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void version(FILE *fp) {
|
2017-01-21 14:55:53 +00:00
|
|
|
char *buildinfo_text = buildinfo("\n");
|
2022-12-28 15:32:24 +00:00
|
|
|
if (fprintf(fp, "%s: %s\n%s\n", appname, ver, buildinfo_text) < 0 ||
|
|
|
|
|
fflush(fp) < 0) {
|
2019-09-08 19:29:00 +00:00
|
|
|
perror("output error");
|
|
|
|
|
exit(1);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
2017-01-21 14:55:53 +00:00
|
|
|
sfree(buildinfo_text);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const char *geometry_string;
|
|
|
|
|
|
2017-11-27 19:40:13 +00:00
|
|
|
void cmdline_error(const char *p, ...)
|
|
|
|
|
{
|
|
|
|
|
va_list ap;
|
|
|
|
|
fprintf(stderr, "%s: ", appname);
|
|
|
|
|
va_start(ap, p);
|
|
|
|
|
vfprintf(stderr, p, ap);
|
|
|
|
|
va_end(ap);
|
|
|
|
|
fputc('\n', stderr);
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
2017-11-27 20:09:54 +00:00
|
|
|
void window_setup_error(const char *errmsg)
|
|
|
|
|
{
|
|
|
|
|
fprintf(stderr, "%s: %s\n", appname, errmsg);
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool do_cmdline(int argc, char **argv, bool do_everything, Conf *conf)
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
{
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool err = false;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
/*
|
2020-06-16 16:48:18 +00:00
|
|
|
* Macros to make argument handling easier.
|
|
|
|
|
*
|
|
|
|
|
* Note that because they need to call `continue', they cannot be
|
|
|
|
|
* contained in the usual do {...} while (0) wrapper to make them
|
|
|
|
|
* syntactically single statements. I use the alternative if (1)
|
|
|
|
|
* {...} else ((void)0).
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
*/
|
2020-06-16 16:48:18 +00:00
|
|
|
#define EXPECTS_ARG if (1) { \
|
New abstraction for command-line arguments.
This begins the process of enabling our Windows applications to handle
Unicode characters on their command lines which don't fit in the
system code page.
Instead of passing plain strings to cmdline_process_param, we now pass
a partially opaque and platform-specific thing called a CmdlineArg.
This has a method that extracts the argument word as a default-encoded
string, and another one that tries to extract it as UTF-8 (though it
may fail if the UTF-8 isn't available).
On Windows, the command line is now constructed by calling
split_into_argv_w on the Unicode command line returned by
GetCommandLineW(), and the UTF-8 method returns text converted
directly from that wide-character form, not going via the system code
page. So it _can_ include UTF-8 characters that wouldn't have
round-tripped via CP_ACP.
This commit introduces the abstraction and switches over the
cross-platform and Windows argv-handling code to use it, with minimal
functional change. Nothing yet tries to call cmdline_arg_get_utf8().
I say 'cross-platform and Windows' because on the Unix side there's
still a lot of use of plain old argv which I haven't converted. That
would be a much larger project, and isn't currently needed: the
_current_ aim of this abstraction is to get the right things to happen
relating to Unicode on Windows, so for code that doesn't run on
Windows anyway, it's not adding value. (Also there's a tension with
GTK, which wants to talk to standard argv and extract arguments _it_
knows about, so at the very least we'd have to let it munge argv
before importing it into this new system.)
2024-09-25 09:18:38 +00:00
|
|
|
if (!nextarg) { \
|
2020-06-16 16:48:18 +00:00
|
|
|
err = true; \
|
|
|
|
|
fprintf(stderr, "%s: %s expects an argument\n", appname, p); \
|
|
|
|
|
continue; \
|
New abstraction for command-line arguments.
This begins the process of enabling our Windows applications to handle
Unicode characters on their command lines which don't fit in the
system code page.
Instead of passing plain strings to cmdline_process_param, we now pass
a partially opaque and platform-specific thing called a CmdlineArg.
This has a method that extracts the argument word as a default-encoded
string, and another one that tries to extract it as UTF-8 (though it
may fail if the UTF-8 isn't available).
On Windows, the command line is now constructed by calling
split_into_argv_w on the Unicode command line returned by
GetCommandLineW(), and the UTF-8 method returns text converted
directly from that wide-character form, not going via the system code
page. So it _can_ include UTF-8 characters that wouldn't have
round-tripped via CP_ACP.
This commit introduces the abstraction and switches over the
cross-platform and Windows argv-handling code to use it, with minimal
functional change. Nothing yet tries to call cmdline_arg_get_utf8().
I say 'cross-platform and Windows' because on the Unix side there's
still a lot of use of plain old argv which I haven't converted. That
would be a much larger project, and isn't currently needed: the
_current_ aim of this abstraction is to get the right things to happen
relating to Unicode on Windows, so for code that doesn't run on
Windows anyway, it's not adding value. (Also there's a tension with
GTK, which wants to talk to standard argv and extract arguments _it_
knows about, so at the very least we'd have to let it munge argv
before importing it into this new system.)
2024-09-25 09:18:38 +00:00
|
|
|
} else { \
|
|
|
|
|
arglistpos++; \
|
|
|
|
|
} \
|
2020-06-16 16:48:18 +00:00
|
|
|
} else ((void)0)
|
|
|
|
|
#define SECOND_PASS_ONLY if (1) { \
|
|
|
|
|
if (!do_everything) \
|
|
|
|
|
continue; \
|
|
|
|
|
} else ((void)0)
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
New abstraction for command-line arguments.
This begins the process of enabling our Windows applications to handle
Unicode characters on their command lines which don't fit in the
system code page.
Instead of passing plain strings to cmdline_process_param, we now pass
a partially opaque and platform-specific thing called a CmdlineArg.
This has a method that extracts the argument word as a default-encoded
string, and another one that tries to extract it as UTF-8 (though it
may fail if the UTF-8 isn't available).
On Windows, the command line is now constructed by calling
split_into_argv_w on the Unicode command line returned by
GetCommandLineW(), and the UTF-8 method returns text converted
directly from that wide-character form, not going via the system code
page. So it _can_ include UTF-8 characters that wouldn't have
round-tripped via CP_ACP.
This commit introduces the abstraction and switches over the
cross-platform and Windows argv-handling code to use it, with minimal
functional change. Nothing yet tries to call cmdline_arg_get_utf8().
I say 'cross-platform and Windows' because on the Unix side there's
still a lot of use of plain old argv which I haven't converted. That
would be a much larger project, and isn't currently needed: the
_current_ aim of this abstraction is to get the right things to happen
relating to Unicode on Windows, so for code that doesn't run on
Windows anyway, it's not adding value. (Also there's a tension with
GTK, which wants to talk to standard argv and extract arguments _it_
knows about, so at the very least we'd have to let it munge argv
before importing it into this new system.)
2024-09-25 09:18:38 +00:00
|
|
|
CmdlineArgList *arglist = cmdline_arg_list_from_argv(argc, argv);
|
|
|
|
|
size_t arglistpos = 0;
|
|
|
|
|
while (arglist->args[arglistpos]) {
|
|
|
|
|
CmdlineArg *arg = arglist->args[arglistpos++];
|
|
|
|
|
CmdlineArg *nextarg = arglist->args[arglistpos];
|
|
|
|
|
const char *p = cmdline_arg_to_str(arg);
|
|
|
|
|
const char *val = cmdline_arg_to_str(nextarg);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
int ret;
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
/*
|
|
|
|
|
* Shameless cheating. Debian requires all X terminal
|
|
|
|
|
* emulators to support `-T title'; but
|
|
|
|
|
* cmdline_process_param will eat -T (it means no-pty) and
|
|
|
|
|
* complain that pterm doesn't support it. So, in pterm
|
|
|
|
|
* only, we convert -T into -title.
|
|
|
|
|
*/
|
|
|
|
|
if ((cmdline_tooltype & TOOLTYPE_NONNETWORK) &&
|
|
|
|
|
!strcmp(p, "-T"))
|
|
|
|
|
p = "-title";
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
New abstraction for command-line arguments.
This begins the process of enabling our Windows applications to handle
Unicode characters on their command lines which don't fit in the
system code page.
Instead of passing plain strings to cmdline_process_param, we now pass
a partially opaque and platform-specific thing called a CmdlineArg.
This has a method that extracts the argument word as a default-encoded
string, and another one that tries to extract it as UTF-8 (though it
may fail if the UTF-8 isn't available).
On Windows, the command line is now constructed by calling
split_into_argv_w on the Unicode command line returned by
GetCommandLineW(), and the UTF-8 method returns text converted
directly from that wide-character form, not going via the system code
page. So it _can_ include UTF-8 characters that wouldn't have
round-tripped via CP_ACP.
This commit introduces the abstraction and switches over the
cross-platform and Windows argv-handling code to use it, with minimal
functional change. Nothing yet tries to call cmdline_arg_get_utf8().
I say 'cross-platform and Windows' because on the Unix side there's
still a lot of use of plain old argv which I haven't converted. That
would be a much larger project, and isn't currently needed: the
_current_ aim of this abstraction is to get the right things to happen
relating to Unicode on Windows, so for code that doesn't run on
Windows anyway, it's not adding value. (Also there's a tension with
GTK, which wants to talk to standard argv and extract arguments _it_
knows about, so at the very least we'd have to let it munge argv
before importing it into this new system.)
2024-09-25 09:18:38 +00:00
|
|
|
ret = cmdline_process_param(
|
|
|
|
|
arg, nextarg, do_everything ? 1 : -1, conf);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
if (ret == -2) {
|
|
|
|
|
cmdline_error("option \"%s\" requires an argument", p);
|
|
|
|
|
} else if (ret == 2) {
|
New abstraction for command-line arguments.
This begins the process of enabling our Windows applications to handle
Unicode characters on their command lines which don't fit in the
system code page.
Instead of passing plain strings to cmdline_process_param, we now pass
a partially opaque and platform-specific thing called a CmdlineArg.
This has a method that extracts the argument word as a default-encoded
string, and another one that tries to extract it as UTF-8 (though it
may fail if the UTF-8 isn't available).
On Windows, the command line is now constructed by calling
split_into_argv_w on the Unicode command line returned by
GetCommandLineW(), and the UTF-8 method returns text converted
directly from that wide-character form, not going via the system code
page. So it _can_ include UTF-8 characters that wouldn't have
round-tripped via CP_ACP.
This commit introduces the abstraction and switches over the
cross-platform and Windows argv-handling code to use it, with minimal
functional change. Nothing yet tries to call cmdline_arg_get_utf8().
I say 'cross-platform and Windows' because on the Unix side there's
still a lot of use of plain old argv which I haven't converted. That
would be a much larger project, and isn't currently needed: the
_current_ aim of this abstraction is to get the right things to happen
relating to Unicode on Windows, so for code that doesn't run on
Windows anyway, it's not adding value. (Also there's a tension with
GTK, which wants to talk to standard argv and extract arguments _it_
knows about, so at the very least we'd have to let it munge argv
before importing it into this new system.)
2024-09-25 09:18:38 +00:00
|
|
|
arglistpos++;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
continue;
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (ret == 1) {
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
if (!strcmp(p, "-fn") || !strcmp(p, "-font")) {
|
|
|
|
|
FontSpec *fs;
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fs = fontspec_new(val);
|
2019-09-08 19:29:00 +00:00
|
|
|
conf_set_fontspec(conf, CONF_font, fs);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fontspec_free(fs);
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-fb")) {
|
|
|
|
|
FontSpec *fs;
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fs = fontspec_new(val);
|
2019-09-08 19:29:00 +00:00
|
|
|
conf_set_fontspec(conf, CONF_boldfont, fs);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fontspec_free(fs);
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-fw")) {
|
|
|
|
|
FontSpec *fs;
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fs = fontspec_new(val);
|
2019-09-08 19:29:00 +00:00
|
|
|
conf_set_fontspec(conf, CONF_widefont, fs);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fontspec_free(fs);
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-fwb")) {
|
|
|
|
|
FontSpec *fs;
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fs = fontspec_new(val);
|
2019-09-08 19:29:00 +00:00
|
|
|
conf_set_fontspec(conf, CONF_wideboldfont, fs);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fontspec_free(fs);
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-cs")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_str(conf, CONF_line_codepage, val);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-geometry")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
geometry_string = val;
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-sl")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_int(conf, CONF_savelines, atoi(val));
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-fg") || !strcmp(p, "-bg") ||
|
|
|
|
|
!strcmp(p, "-bfg") || !strcmp(p, "-bbg") ||
|
|
|
|
|
!strcmp(p, "-cfg") || !strcmp(p, "-cbg")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
{
|
|
|
|
|
#if GTK_CHECK_VERSION(3,0,0)
|
|
|
|
|
GdkRGBA rgba;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool success = gdk_rgba_parse(&rgba, val);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
#else
|
|
|
|
|
GdkColor col;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool success = gdk_color_parse(val, &col);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (!success) {
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
err = true;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
fprintf(stderr, "%s: unable to parse colour \"%s\"\n",
|
|
|
|
|
appname, val);
|
|
|
|
|
} else {
|
|
|
|
|
#if GTK_CHECK_VERSION(3,0,0)
|
|
|
|
|
int r = rgba.red * 255;
|
|
|
|
|
int g = rgba.green * 255;
|
|
|
|
|
int b = rgba.blue * 255;
|
|
|
|
|
#else
|
|
|
|
|
int r = col.red / 256;
|
|
|
|
|
int g = col.green / 256;
|
|
|
|
|
int b = col.blue / 256;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
int index;
|
|
|
|
|
index = (!strcmp(p, "-fg") ? 0 :
|
|
|
|
|
!strcmp(p, "-bg") ? 2 :
|
|
|
|
|
!strcmp(p, "-bfg") ? 1 :
|
|
|
|
|
!strcmp(p, "-bbg") ? 3 :
|
|
|
|
|
!strcmp(p, "-cfg") ? 4 :
|
|
|
|
|
!strcmp(p, "-cbg") ? 5 : -1);
|
|
|
|
|
assert(index != -1);
|
|
|
|
|
|
|
|
|
|
conf_set_int_int(conf, CONF_colours, index*3+0, r);
|
|
|
|
|
conf_set_int_int(conf, CONF_colours, index*3+1, g);
|
|
|
|
|
conf_set_int_int(conf, CONF_colours, index*3+2, b);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (use_pty_argv && !strcmp(p, "-e")) {
|
|
|
|
|
/* This option swallows all further arguments. */
|
|
|
|
|
if (!do_everything)
|
|
|
|
|
break;
|
|
|
|
|
|
New abstraction for command-line arguments.
This begins the process of enabling our Windows applications to handle
Unicode characters on their command lines which don't fit in the
system code page.
Instead of passing plain strings to cmdline_process_param, we now pass
a partially opaque and platform-specific thing called a CmdlineArg.
This has a method that extracts the argument word as a default-encoded
string, and another one that tries to extract it as UTF-8 (though it
may fail if the UTF-8 isn't available).
On Windows, the command line is now constructed by calling
split_into_argv_w on the Unicode command line returned by
GetCommandLineW(), and the UTF-8 method returns text converted
directly from that wide-character form, not going via the system code
page. So it _can_ include UTF-8 characters that wouldn't have
round-tripped via CP_ACP.
This commit introduces the abstraction and switches over the
cross-platform and Windows argv-handling code to use it, with minimal
functional change. Nothing yet tries to call cmdline_arg_get_utf8().
I say 'cross-platform and Windows' because on the Unix side there's
still a lot of use of plain old argv which I haven't converted. That
would be a much larger project, and isn't currently needed: the
_current_ aim of this abstraction is to get the right things to happen
relating to Unicode on Windows, so for code that doesn't run on
Windows anyway, it's not adding value. (Also there's a tension with
GTK, which wants to talk to standard argv and extract arguments _it_
knows about, so at the very least we'd have to let it munge argv
before importing it into this new system.)
2024-09-25 09:18:38 +00:00
|
|
|
if (nextarg) {
|
|
|
|
|
pty_argv = cmdline_arg_remainder(nextarg);
|
2019-09-08 19:29:00 +00:00
|
|
|
break; /* finished command-line processing */
|
|
|
|
|
} else
|
|
|
|
|
err = true, fprintf(stderr, "%s: -e expects an argument\n",
|
2022-08-03 19:48:46 +00:00
|
|
|
appname);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-title")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_str(conf, CONF_wintitle, val);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-log")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
SECOND_PASS_ONLY;
|
2024-09-24 16:50:19 +00:00
|
|
|
Filename *fn = cmdline_arg_to_filename(nextarg);
|
2019-09-08 19:29:00 +00:00
|
|
|
conf_set_filename(conf, CONF_logfilename, fn);
|
|
|
|
|
conf_set_int(conf, CONF_logtype, LGTYP_DEBUG);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
filename_free(fn);
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-ut-") || !strcmp(p, "+ut")) {
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_bool(conf, CONF_stamp_utmp, false);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-ut")) {
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_bool(conf, CONF_stamp_utmp, true);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-ls-") || !strcmp(p, "+ls")) {
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_bool(conf, CONF_login_shell, false);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-ls")) {
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_bool(conf, CONF_login_shell, true);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-nethack")) {
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_bool(conf, CONF_nethack_keypad, true);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-sb-") || !strcmp(p, "+sb")) {
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_bool(conf, CONF_scrollbar, false);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-sb")) {
|
|
|
|
|
SECOND_PASS_ONLY;
|
|
|
|
|
conf_set_bool(conf, CONF_scrollbar, true);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-name")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
app_name = val;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (!strcmp(p, "-xrm")) {
|
|
|
|
|
EXPECTS_ARG;
|
|
|
|
|
provide_xrm_string(val, appname);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2022-12-28 15:32:24 +00:00
|
|
|
} else if (!strcmp(p, "-help") || !strcmp(p, "--help")) {
|
2019-09-08 19:29:00 +00:00
|
|
|
help(stdout);
|
|
|
|
|
exit(0);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2022-12-28 15:32:24 +00:00
|
|
|
} else if (!strcmp(p, "-version") || !strcmp(p, "--version")) {
|
2019-09-08 19:29:00 +00:00
|
|
|
version(stdout);
|
|
|
|
|
exit(0);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
} else if (!strcmp(p, "-pgpfp")) {
|
|
|
|
|
pgp_fingerprints();
|
2024-09-25 15:26:17 +00:00
|
|
|
exit(0);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2022-05-01 08:16:46 +00:00
|
|
|
} else if (has_ca_config_box &&
|
|
|
|
|
(!strcmp(p, "-host-ca") || !strcmp(p, "--host-ca") ||
|
|
|
|
|
!strcmp(p, "-host_ca") || !strcmp(p, "--host_ca"))) {
|
2022-05-01 07:22:44 +00:00
|
|
|
show_ca_config_box_synchronously();
|
|
|
|
|
exit(0);
|
|
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else if (p[0] != '-') {
|
Centralise PuTTY and Plink's non-option argument handling.
This is another piece of long-overdue refactoring similar to the
recent commit e3796cb77. But where that one dealt with normalisation
of stuff already stored _in_ a Conf by whatever means (including, in
particular, handling a user typing 'username@host.name' into the
Hostname box of the GUI session dialog box), this one deals with
handling argv entries and putting them into the Conf.
This isn't exactly a pure no-functional-change-at-all refactoring. On
the other hand, it isn't a full-on cleanup that completely
rationalises all the user-visible behaviour as well as the code
structure. It's somewhere in between: I've preserved all the behaviour
quirks that I could imagine a reason for having intended, but taken
the opportunity to _not_ faithfully replicate anything I thought was
clearly just a bug.
So, for example, the following inconsistency is carefully preserved:
the command 'plink -load session nextword' treats 'nextword' as a host
name if the loaded session hasn't provided a hostname already, and
otherwise treats 'nextword' as the remote command to execute on the
already-specified remote host, but the same combination of arguments
to GUI PuTTY will _always_ treat 'nextword' as a hostname, overriding
a hostname (if any) in the saved session. That makes some sense to me
because of the different shapes of the overall command lines.
On the other hand, there are two behaviour changes I know of as a
result of this commit: a third argument to GUI PuTTY (after a hostname
and port) now provokes an error message instead of being silently
ignored, and in Plink, if you combine a -P option (specifying a port
number) with the historical comma-separated protocol selection prefix
on the hostname argument (which I'd completely forgotten even existed
until this piece of work), then the -P will now override the selected
protocol's default port number, whereas previously the default port
would win. For example, 'plink -P 12345 telnet,hostname' will now
connect via Telnet to port 12345 instead of to port 23.
There may be scope for removing or rethinking some of the command-
line syntax quirks in the wake of this change. If we do decide to do
anything like that, then hopefully having it all in one place will
make it easier to remove or change things consistently across the
tools.
2017-12-07 19:59:43 +00:00
|
|
|
/* Non-option arguments not handled by cmdline.c are errors. */
|
|
|
|
|
if (do_everything) {
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
err = true;
|
Centralise PuTTY and Plink's non-option argument handling.
This is another piece of long-overdue refactoring similar to the
recent commit e3796cb77. But where that one dealt with normalisation
of stuff already stored _in_ a Conf by whatever means (including, in
particular, handling a user typing 'username@host.name' into the
Hostname box of the GUI session dialog box), this one deals with
handling argv entries and putting them into the Conf.
This isn't exactly a pure no-functional-change-at-all refactoring. On
the other hand, it isn't a full-on cleanup that completely
rationalises all the user-visible behaviour as well as the code
structure. It's somewhere in between: I've preserved all the behaviour
quirks that I could imagine a reason for having intended, but taken
the opportunity to _not_ faithfully replicate anything I thought was
clearly just a bug.
So, for example, the following inconsistency is carefully preserved:
the command 'plink -load session nextword' treats 'nextword' as a host
name if the loaded session hasn't provided a hostname already, and
otherwise treats 'nextword' as the remote command to execute on the
already-specified remote host, but the same combination of arguments
to GUI PuTTY will _always_ treat 'nextword' as a hostname, overriding
a hostname (if any) in the saved session. That makes some sense to me
because of the different shapes of the overall command lines.
On the other hand, there are two behaviour changes I know of as a
result of this commit: a third argument to GUI PuTTY (after a hostname
and port) now provokes an error message instead of being silently
ignored, and in Plink, if you combine a -P option (specifying a port
number) with the historical comma-separated protocol selection prefix
on the hostname argument (which I'd completely forgotten even existed
until this piece of work), then the -P will now override the selected
protocol's default port number, whereas previously the default port
would win. For example, 'plink -P 12345 telnet,hostname' will now
connect via Telnet to port 12345 instead of to port 23.
There may be scope for removing or rethinking some of the command-
line syntax quirks in the wake of this change. If we do decide to do
anything like that, then hopefully having it all in one place will
make it easier to remove or change things consistently across the
tools.
2017-12-07 19:59:43 +00:00
|
|
|
fprintf(stderr, "%s: unexpected non-option argument '%s'\n",
|
|
|
|
|
appname, p);
|
|
|
|
|
}
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
} else {
|
|
|
|
|
err = true;
|
|
|
|
|
fprintf(stderr, "%s: unrecognized option '%s'\n", appname, p);
|
|
|
|
|
}
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
|
Remove the 'Frontend' type and replace it with a vtable.
After the recent Seat and LogContext revamps, _nearly_ all the
remaining uses of the type 'Frontend' were in terminal.c, which needs
all sorts of interactions with the GUI window the terminal lives in,
from the obvious (actually drawing text on the window, reading and
writing the clipboard) to the obscure (minimising, maximising and
moving the window in response to particular escape sequences).
All of those functions are now provided by an abstraction called
TermWin. The few remaining uses of Frontend after _that_ are internal
to a particular platform directory, so as to spread the implementation
of that particular kind of Frontend between multiple source files; so
I've renamed all of those so that they take a more specifically named
type that refers to the particular implementation rather than the
general abstraction.
So now the name 'Frontend' no longer exists in the code base at all,
and everywhere one used to be used, it's completely clear whether it
was operating in one of Frontend's three abstract roles (and if so,
which), or whether it was specific to a particular implementation.
Another type that's disappeared is 'Context', which used to be a
typedef defined to something different on each platform, describing
whatever short-lived resources were necessary to draw on the terminal
window: the front end would provide a ready-made one when calling
term_paint, and the terminal could request one with get_ctx/free_ctx
if it wanted to do proactive window updates. Now that drawing context
lives inside the TermWin itself, because there was never any need to
have two of those contexts live at the same time.
(Another minor API change is that the window-title functions - both
reading and writing - have had a missing 'const' added to their char *
parameters / return values.)
I don't expect this change to enable any particularly interesting new
functionality (in particular, I have no plans that need more than one
implementation of TermWin in the same application). But it completes
the tidying-up that began with the Seat and LogContext rework.
2018-10-25 17:44:04 +00:00
|
|
|
GtkWidget *make_gtk_toplevel_window(GtkFrontend *frontend)
|
2016-03-23 22:03:46 +00:00
|
|
|
{
|
|
|
|
|
return gtk_window_new(GTK_WINDOW_TOPLEVEL);
|
|
|
|
|
}
|
|
|
|
|
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
const bool buildinfo_gtk_relevant = true;
|
2017-02-22 22:10:05 +00:00
|
|
|
|
Make the configuration dialog non-modal.
Now every call to do_config_box is replaced with a call to
create_config_box, which returns immediately having constructed the
new GTK window object, and is passed a callback function which it will
arrange to be called when the dialog terminates (whether by OK or by
Cancel). That callback is now what triggers the construction of a
session window after 'Open' is pressed in the initial config box, or
the actual mid-session reconfiguration action after 'Apply' is pressed
in a Change Settings box.
We were already prepared to ignore the re-selection of 'Change
Settings' from the context menu of a window that already had a Change
Settings box open (and not accidentally create a second config box for
the same window); but now we do slightly better, by finding the
existing config box and un-minimising and raising it, in case the user
had forgotten it was there.
That's a useful featurelet, but not the main purpose of this change.
The mani point, of course, is that now the multi-window GtkApplication
based front ends now don't do anything confusing to the nesting of
gtk_main() when config boxes are involved. Whether you're changing the
settings of one (or more than one) of your already-running sessions,
preparing to start up a new PuTTY connection, or both at once, we stay
in the same top-level instance of gtk_main() and all sessions' top-
level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
|
|
|
struct post_initial_config_box_ctx {
|
|
|
|
|
Conf *conf;
|
|
|
|
|
const char *geometry_string;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void post_initial_config_box(void *vctx, int result)
|
|
|
|
|
{
|
|
|
|
|
struct post_initial_config_box_ctx ctx =
|
|
|
|
|
*(struct post_initial_config_box_ctx *)vctx;
|
|
|
|
|
sfree(vctx);
|
|
|
|
|
|
2017-11-26 14:37:38 +00:00
|
|
|
if (result > 0) {
|
Make the configuration dialog non-modal.
Now every call to do_config_box is replaced with a call to
create_config_box, which returns immediately having constructed the
new GTK window object, and is passed a callback function which it will
arrange to be called when the dialog terminates (whether by OK or by
Cancel). That callback is now what triggers the construction of a
session window after 'Open' is pressed in the initial config box, or
the actual mid-session reconfiguration action after 'Apply' is pressed
in a Change Settings box.
We were already prepared to ignore the re-selection of 'Change
Settings' from the context menu of a window that already had a Change
Settings box open (and not accidentally create a second config box for
the same window); but now we do slightly better, by finding the
existing config box and un-minimising and raising it, in case the user
had forgotten it was there.
That's a useful featurelet, but not the main purpose of this change.
The mani point, of course, is that now the multi-window GtkApplication
based front ends now don't do anything confusing to the nesting of
gtk_main() when config boxes are involved. Whether you're changing the
settings of one (or more than one) of your already-running sessions,
preparing to start up a new PuTTY connection, or both at once, we stay
in the same top-level instance of gtk_main() and all sessions' top-
level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
|
|
|
new_session_window(ctx.conf, ctx.geometry_string);
|
2020-03-13 22:48:53 +00:00
|
|
|
} else {
|
Make the configuration dialog non-modal.
Now every call to do_config_box is replaced with a call to
create_config_box, which returns immediately having constructed the
new GTK window object, and is passed a callback function which it will
arrange to be called when the dialog terminates (whether by OK or by
Cancel). That callback is now what triggers the construction of a
session window after 'Open' is pressed in the initial config box, or
the actual mid-session reconfiguration action after 'Apply' is pressed
in a Change Settings box.
We were already prepared to ignore the re-selection of 'Change
Settings' from the context menu of a window that already had a Change
Settings box open (and not accidentally create a second config box for
the same window); but now we do slightly better, by finding the
existing config box and un-minimising and raising it, in case the user
had forgotten it was there.
That's a useful featurelet, but not the main purpose of this change.
The mani point, of course, is that now the multi-window GtkApplication
based front ends now don't do anything confusing to the nesting of
gtk_main() when config boxes are involved. Whether you're changing the
settings of one (or more than one) of your already-running sessions,
preparing to start up a new PuTTY connection, or both at once, we stay
in the same top-level instance of gtk_main() and all sessions' top-
level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
|
|
|
/* In this main(), which only runs one session in total, a
|
|
|
|
|
* negative result from the initial config box means we simply
|
|
|
|
|
* terminate. */
|
|
|
|
|
conf_free(ctx.conf);
|
|
|
|
|
gtk_main_quit();
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void session_window_closed(void)
|
|
|
|
|
{
|
|
|
|
|
gtk_main_quit();
|
|
|
|
|
}
|
|
|
|
|
|
2016-03-23 21:58:40 +00:00
|
|
|
int main(int argc, char **argv)
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
{
|
|
|
|
|
Conf *conf;
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
bool need_config_box;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
setlocale(LC_CTYPE, "");
|
|
|
|
|
|
2018-11-03 10:06:33 +00:00
|
|
|
/* Call the function in ux{putty,pterm}.c to do app-type
|
|
|
|
|
* specific setup */
|
|
|
|
|
setup(true); /* true means we are a one-session process */
|
2016-03-23 21:58:40 +00:00
|
|
|
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
progname = argv[0];
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Copy the original argv before letting gtk_init fiddle with
|
|
|
|
|
* it. It will be required later.
|
|
|
|
|
*/
|
|
|
|
|
{
|
2019-09-08 19:29:00 +00:00
|
|
|
int i, oldargc;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
gtkargvstart = snewn(argc-1, char *);
|
2019-09-08 19:29:00 +00:00
|
|
|
for (i = 1; i < argc; i++)
|
|
|
|
|
gtkargvstart[i-1] = dupstr(argv[i]);
|
|
|
|
|
oldargc = argc;
|
|
|
|
|
gtk_init(&argc, &argv);
|
|
|
|
|
ngtkargs = oldargc - argc;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
conf = conf_new();
|
|
|
|
|
|
|
|
|
|
gtkcomm_setup();
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Block SIGPIPE: if we attempt Duplicate Session or similar and
|
|
|
|
|
* it falls over in some way, we certainly don't want SIGPIPE
|
|
|
|
|
* terminating the main pterm/PuTTY. However, we'll have to
|
|
|
|
|
* unblock it again when pterm forks.
|
|
|
|
|
*/
|
Convert a lot of 'int' variables to 'bool'.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
|
|
|
block_signal(SIGPIPE, true);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
if (argc > 1 && !strncmp(argv[1], "---", 3)) {
|
2019-09-08 19:29:00 +00:00
|
|
|
read_dupsession_data(conf, argv[1]);
|
|
|
|
|
/* Splatter this argument so it doesn't clutter a ps listing */
|
|
|
|
|
smemclr(argv[1], strlen(argv[1]));
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2016-03-27 13:10:06 +00:00
|
|
|
assert(!dup_check_launchable || conf_launchable(conf));
|
2018-10-29 19:50:29 +00:00
|
|
|
need_config_box = false;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
} else {
|
2019-09-08 19:29:00 +00:00
|
|
|
if (do_cmdline(argc, argv, false, conf))
|
|
|
|
|
exit(1); /* pre-defaults pass to get -class */
|
|
|
|
|
do_defaults(NULL, conf);
|
|
|
|
|
if (do_cmdline(argc, argv, true, conf))
|
|
|
|
|
exit(1); /* post-defaults, do everything */
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2019-09-08 19:29:00 +00:00
|
|
|
cmdline_run_saved(conf);
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
2017-12-08 19:34:35 +00:00
|
|
|
if (cmdline_tooltype & TOOLTYPE_HOST_ARG)
|
|
|
|
|
need_config_box = !cmdline_host_ok(conf);
|
|
|
|
|
else
|
2018-10-29 19:50:29 +00:00
|
|
|
need_config_box = false;
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
}
|
|
|
|
|
|
Make the configuration dialog non-modal.
Now every call to do_config_box is replaced with a call to
create_config_box, which returns immediately having constructed the
new GTK window object, and is passed a callback function which it will
arrange to be called when the dialog terminates (whether by OK or by
Cancel). That callback is now what triggers the construction of a
session window after 'Open' is pressed in the initial config box, or
the actual mid-session reconfiguration action after 'Apply' is pressed
in a Change Settings box.
We were already prepared to ignore the re-selection of 'Change
Settings' from the context menu of a window that already had a Change
Settings box open (and not accidentally create a second config box for
the same window); but now we do slightly better, by finding the
existing config box and un-minimising and raising it, in case the user
had forgotten it was there.
That's a useful featurelet, but not the main purpose of this change.
The mani point, of course, is that now the multi-window GtkApplication
based front ends now don't do anything confusing to the nesting of
gtk_main() when config boxes are involved. Whether you're changing the
settings of one (or more than one) of your already-running sessions,
preparing to start up a new PuTTY connection, or both at once, we stay
in the same top-level instance of gtk_main() and all sessions' top-
level callbacks continue to run sensibly.
2017-11-26 11:58:02 +00:00
|
|
|
if (need_config_box) {
|
|
|
|
|
/*
|
|
|
|
|
* Put up the initial config box, which will pass the provided
|
|
|
|
|
* parameters (with conf updated) to new_session_window() when
|
|
|
|
|
* (if) the user selects Open. Or it might close without
|
|
|
|
|
* creating a session window, if the user selects Cancel. Or
|
|
|
|
|
* it might just create the session window immediately if this
|
|
|
|
|
* is a pterm-style app which doesn't have an initial config
|
|
|
|
|
* box at all.
|
|
|
|
|
*/
|
|
|
|
|
struct post_initial_config_box_ctx *ctx =
|
|
|
|
|
snew(struct post_initial_config_box_ctx);
|
|
|
|
|
ctx->conf = conf;
|
|
|
|
|
ctx->geometry_string = geometry_string;
|
|
|
|
|
initial_config_box(conf, post_initial_config_box, ctx);
|
|
|
|
|
} else {
|
|
|
|
|
/*
|
|
|
|
|
* No initial config needed; just create the session window
|
|
|
|
|
* now.
|
|
|
|
|
*/
|
|
|
|
|
new_session_window(conf, geometry_string);
|
|
|
|
|
}
|
Divide the whole of gtkwin.c into three parts.
This lays further groundwork for the OS X GTK3 port, which is going to
have to deal with multiple sessions sharing the same process. gtkwin.c
was a bit too monolithic for this, since it included some
process-global runtime state (timers, toplevel callbacks), some
process startup stuff (gtk_init, gtk_main, argv processing) and some
per-session-window stuff.
The per-session stuff remains in gtkwin.c, with the top-level function
now being new_session_window() taking a Conf. The new gtkmain.c
contains the outer skeleton of pt_main(), handling argv processing and
one-off startup stuff like setlocale; and the new gtkcomm.c contains
the pieces of PuTTY infrastructure like timers and uxsel that are
shared between multiple sessions rather than reinstantiated per
session, which have been rewritten to use global variables rather than
fields in 'inst' (since it's now clear to me that they'll have to
apply to all the insts in existence at once).
There are still some lurking assumptions of one-session-per-process,
e.g. the use of gtk_main_quit when a session finishes, and the fact
that the config box insists on running as a separate invocation of
gtk_main so that one session's preliminary config box can't coexist
with another session already active. But this should make it possible
to at least write an OS X app good enough to start testing with, even
if it doesn't get everything quite right yet.
This change is almost entirely rearranging existing code, so it
shouldn't be seriously destabilising. But two noticeable actual
changes have happened, both pleasantly simplifying:
Firstly, the global-variables rewrite of gtkcomm.c has allowed the
post_main edifice to become a great deal simpler. Most of its
complexity was about remembering what 'inst' it had to call back to,
and in fact the right answer is that it shouldn't be calling back to
one at all. So now the post_main() called by gtkdlg.c has become the
same function as the old inst_post_main() that actually did the work,
instead of the two having to be connected by a piece of ugly plumbing.
Secondly, a piece of code that's vanished completely in this
refactoring is the temporary blocking of SIGCHLD around most of the
session setup code. This turns out to have been introduced in 2002,
_before_ I switched to using the intra-process signal pipe strategy
for SIGCHLD handling in 2003. So I now expect that we should be robust
in any case against receiving SIGCHLD at an inconvenient moment, and
hence there's no need to block it.
2016-03-22 21:24:30 +00:00
|
|
|
|
|
|
|
|
gtk_main();
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|