nhyatt/putty-source
1
0
Fork 0
mirror of https://git.tartarus.org/simon/putty.git synced 2025-01-09 17:38:00 +00:00
Code Issues Projects Releases Wiki Activity
f317f8e67e
putty-source/unix/CMakeLists.txt

205 lines
5.5 KiB
CMake
Raw Normal View History

Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR})
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(utils
New library-style 'utils' subdirectories. Now that the new CMake build system is encouraging us to lay out the code like a set of libraries, it seems like a good idea to make them look more _like_ libraries, by putting things into separate modules as far as possible. This fixes several previous annoyances in which you had to link against some object in order to get a function you needed, but that object also contained other functions you didn't need which included link-time symbol references you didn't want to have to deal with. The usual offender was subsidiary supporting programs including misc.c for some innocuous function and then finding they had to deal with the requirements of buildinfo(). This big reorganisation introduces three new subdirectories called 'utils', one at the top level and one in each platform subdir. In each case, the directory contains basically the same files that were previously placed in the 'utils' build-time library, except that the ones that were extremely miscellaneous (misc.c, utils.c, uxmisc.c, winmisc.c, winmiscs.c, winutils.c) have been split up into much smaller pieces.
2021-04-17 14:22:20 +00:00
utils/arm_arch_queries.c
utils/block_signal.c
utils/cloexec.c
utils/dputs.c
utils/filename.c
utils/fontspec.c
utils/getticks.c
utils/get_username.c
utils/keysym_to_unicode.c
utils/make_dir_and_check_ours.c
utils/make_dir_path.c
utils/nonblock.c
utils/open_for_write_would_lose_data.c
utils/pgp_fingerprints.c
utils/pollwrap.c
utils/signal.c
utils/x11_ignore_error.c
# Compiled icon pixmap files
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
putty-xpm.c
putty-config-xpm.c
pterm-xpm.c
pterm-config-xpm.c
New library-style 'utils' subdirectories. Now that the new CMake build system is encouraging us to lay out the code like a set of libraries, it seems like a good idea to make them look more _like_ libraries, by putting things into separate modules as far as possible. This fixes several previous annoyances in which you had to link against some object in order to get a function you needed, but that object also contained other functions you didn't need which included link-time symbol references you didn't want to have to deal with. The usual offender was subsidiary supporting programs including misc.c for some innocuous function and then finding they had to deal with the requirements of buildinfo(). This big reorganisation introduces three new subdirectories called 'utils', one at the top level and one in each platform subdir. In each case, the directory contains basically the same files that were previously placed in the 'utils' build-time library, except that the ones that were extremely miscellaneous (misc.c, utils.c, uxmisc.c, winmisc.c, winmiscs.c, winutils.c) have been split up into much smaller pieces.
2021-04-17 14:22:20 +00:00
# We want the ISO C implementation of ltime(), because we don't have
# a local better alternative
../utils/ltime.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(eventloop
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
cliloop.c uxsel.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(console
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
console.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(settings
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
storage.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(network
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
network.c fd-socket.c agent-socket.c peerinfo.c local-proxy.c x11.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(sshcommon
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
noise.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(sshclient
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
gss.c agent-client.c sharing.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(sshserver
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
sftpserver.c procnet.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(sftpclient
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
sftp.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(otherbackends
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
serial.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(agent
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
agent-client.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_executable(fuzzterm
${CMAKE_SOURCE_DIR}/fuzzterm.c
${CMAKE_SOURCE_DIR}/be_none.c
${CMAKE_SOURCE_DIR}/logging.c
${CMAKE_SOURCE_DIR}/noprint.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
unicode.c
no-gtk.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_dependencies(fuzzterm generated_licence_h)
target_link_libraries(fuzzterm
guiterminal eventloop charset settings utils)
add_executable(osxlaunch
osxlaunch.c)
Move some add_executable() calls to top-level CMakeLists. Now that the main source file of Plink in each platform directory has the same name, we can put centralise the main definition of the program in the main CMakeLists.txt, and in the platform directory, just add the few extra modules needed to clear up platform-specific details. The same goes for psocks. And PSCP and PSFTP could have been moved to the top level already - I just hadn't done it in the initial setup.
2021-04-23 05:46:02 +00:00
add_sources_from_current_dir(plink no-gtk.c)
add_sources_from_current_dir(pscp no-gtk.c)
add_sources_from_current_dir(psftp no-gtk.c)
add_sources_from_current_dir(psocks no-gtk.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_executable(psusan
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
psusan.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/be_none.c
${CMAKE_SOURCE_DIR}/nogss.c
Move the SSH implementation into its own subdirectory. This clears up another large pile of clutter at the top level, and in the process, allows me to rename source files to things that don't all have that annoying 'ssh' prefix at the top.
2021-04-22 16:58:40 +00:00
${CMAKE_SOURCE_DIR}/ssh/scpserver.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
no-gtk.c
pty.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
target_link_libraries(psusan
eventloop sshserver keygen settings network crypto utils)
installed_program(psusan)
add_library(puttygen-common OBJECT
${CMAKE_SOURCE_DIR}/notiming.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
keygen-noise.c
no-gtk.c
noise.c
storage.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/sshpubk.c
${CMAKE_SOURCE_DIR}/sshrand.c)
add_executable(puttygen
${CMAKE_SOURCE_DIR}/cmdgen.c)
target_link_libraries(puttygen
puttygen-common keygen console crypto utils)
installed_program(puttygen)
add_executable(cgtest
${CMAKE_SOURCE_DIR}/cgtest.c)
target_link_libraries(cgtest
puttygen-common keygen console crypto utils)
add_executable(testsc
${CMAKE_SOURCE_DIR}/testsc.c)
testsc: add side-channel test of probabilistic prime gen. Now that I've removed side-channel leakage from both prime candidate generation (via mp_unsafe_mod_integer) and Miller-Rabin, the probabilistic prime generation system in this code base is now able to get through testsc without it detecting any source of cache or timing side channels. So you should be able to generate an RSA key (in which the primes themselves must be secret) in a more hostile environment than you could previously be confident of. This is a bit counterintuitive, because _obviously_ random prime generation takes a variable amount of time, because it has to keep retrying until an attempt succeeds! But that's OK as long as the attempts are completely independent, because then any timing or cache information leaked by a _failed_ attempt will only tell an attacker about the numbers used in the failed attempt, and those numbers have been thrown away, so it doesn't matter who knows them. It's only important that the _successful_ attempt, from generating the random candidate through to completing its verification as (probably) prime, should be side-channel clean, because that's the attempt whose data is actually going to be turned into a private key that needs to be kept secret. (In particular, this means you have to avoid the old-fashioned strategy of generating successive prime candidates by incrementing a starting value until you find something not divisible by any small prime, because the number of iterations of that method would be a timing leak. Happily, we stopped doing that last year, in commit 08a3547bc54051e: now every candidate integer is generated independently, and if one fails the initial checks, we throw it away and start completely from scratch with a fresh random value.) So the test harness works by repeatedly running the prime generator in one-shot mode until an attempt succeeds, and then resetting the random-number stream to where it was just before the successful attempt. Then we generate the same prime number again, this time with the sclog mechanism turned on - and then, we compare it against the version we previously generated with the same random numbers, to make sure they're the same. This checks that the attempts really _are_ independent, in the sense that the prime generator is a pure function of its random input stream, and doesn't depend on state left over from previous attempts.
2021-08-27 16:46:25 +00:00
target_link_libraries(testsc keygen crypto utils)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_executable(testzlib
${CMAKE_SOURCE_DIR}/testzlib.c
Move the SSH implementation into its own subdirectory. This clears up another large pile of clutter at the top level, and in the process, allows me to rename source files to things that don't all have that annoying 'ssh' prefix at the top.
2021-04-22 16:58:40 +00:00
${CMAKE_SOURCE_DIR}/ssh/zlib.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
target_link_libraries(testzlib utils)
add_executable(uppity
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
uppity.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/be_none.c
Move the SSH implementation into its own subdirectory. This clears up another large pile of clutter at the top level, and in the process, allows me to rename source files to things that don't all have that annoying 'ssh' prefix at the top.
2021-04-22 16:58:40 +00:00
${CMAKE_SOURCE_DIR}/ssh/scpserver.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
no-gtk.c
pty.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/nogss.c)
target_link_libraries(uppity
eventloop sshserver keygen settings network crypto utils)
if(GTK_FOUND)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(utils
Break up gtkmisc.c. It's another file that should have been subdivided into lots of tiny separate things in the utils library - especially since for some reason I made a completely separate 'guimisc' cmake-level library for it when there was no need.
2021-04-24 06:51:15 +00:00
utils/align_label_left.c
utils/buildinfo_gtk_version.c
utils/get_label_text_dimensions.c
utils/get_x11_display.c
utils/our_dialog.c
utils/string_width.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
columns.c)
Rename one of my cmake support functions. (NFC) add_platform_sources_to_library() is now called add_sources_from_current_dir(), so that it will make sense when I use it in subdirectories that aren't for a particular platform.
2021-04-18 12:37:18 +00:00
add_sources_from_current_dir(guiterminal
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
window.c unifont.c dialog.c config-gtk.c gtk-common.c config-unix.c unicode.c printing.c)
add_dependencies(guiterminal generated_licence_h) # dialog.c uses licence.h
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_executable(pageant
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
pageant.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/be_misc.c
${CMAKE_SOURCE_DIR}/be_none.c
${CMAKE_SOURCE_DIR}/nogss.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
askpass.c
x11.c
noise.c
Initial support for in-process proxy SSH connections. This introduces a new entry to the radio-button list of proxy types, in which the 'Proxy host' box is taken to be the name of an SSH server or saved session. We make an entire subsidiary SSH connection to that host, open a direct-tcpip channel through it, and use that as the connection over which to run the primary network connection. The result is basically the same as if you used a local proxy subprocess, with a command along the lines of 'plink -batch %proxyhost -nc %host:%port'. But it's all done in-process, by having an SshProxy object implement the Socket trait to talk to the main connection, and implement Seat and LogPolicy to talk to its subsidiary SSH backend. All the refactoring in recent years has got us to the point where we can do that without both SSH instances fighting over some global variable or unique piece of infrastructure. From an end user perspective, doing SSH proxying in-process like this is a little bit easier to set up: it doesn't require you to bake the full pathname of Plink into your saved session (or to have it on the system PATH), and the SshProxy setup function automatically turns off SSH features that would be inappropriate in this context, such as additional port forwardings, or acting as a connection-sharing upstream. And it has minor advantages like getting the Event Log for the subsidiary connection interleaved in the main Event Log, as if it were stderr output from a proxy subcommand, without having to deliberately configure the subsidiary Plink into verbose mode. However, this is an initial implementation only, and it doesn't yet support the _big_ payoff for doing this in-process, which (I hope) will be the ability to handle interactive prompts from the subsidiary SSH connection via the same user interface as the primary one. For example, you might need to answer two password prompts in succession, or (the first time you use a session configured this way) confirm the host keys for both proxy and destination SSH servers. Comments in the new source file discuss some design thoughts on filling in this gap. For the moment, if the proxy SSH connection encounters any situation where an interactive prompt is needed, it will make the safe assumption, the same way 'plink -batch' would do. So it's at least no _worse_ than the existing technique of putting the proxy connection in a subprocess.
2021-05-22 11:51:23 +00:00
${CMAKE_SOURCE_DIR}/ssh/x11fwd.c
${CMAKE_SOURCE_DIR}/nosshproxy.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
target_link_libraries(pageant
Break up gtkmisc.c. It's another file that should have been subdivided into lots of tiny separate things in the utils library - especially since for some reason I made a completely separate 'guimisc' cmake-level library for it when there was no need.
2021-04-24 06:51:15 +00:00
eventloop console agent settings network crypto utils
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${GTK_LIBRARIES})
installed_program(pageant)
add_executable(pterm
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
pterm.c
main-gtk-simple.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/be_none.c
${CMAKE_SOURCE_DIR}/nogss.c
Initial support for in-process proxy SSH connections. This introduces a new entry to the radio-button list of proxy types, in which the 'Proxy host' box is taken to be the name of an SSH server or saved session. We make an entire subsidiary SSH connection to that host, open a direct-tcpip channel through it, and use that as the connection over which to run the primary network connection. The result is basically the same as if you used a local proxy subprocess, with a command along the lines of 'plink -batch %proxyhost -nc %host:%port'. But it's all done in-process, by having an SshProxy object implement the Socket trait to talk to the main connection, and implement Seat and LogPolicy to talk to its subsidiary SSH backend. All the refactoring in recent years has got us to the point where we can do that without both SSH instances fighting over some global variable or unique piece of infrastructure. From an end user perspective, doing SSH proxying in-process like this is a little bit easier to set up: it doesn't require you to bake the full pathname of Plink into your saved session (or to have it on the system PATH), and the SshProxy setup function automatically turns off SSH features that would be inappropriate in this context, such as additional port forwardings, or acting as a connection-sharing upstream. And it has minor advantages like getting the Event Log for the subsidiary connection interleaved in the main Event Log, as if it were stderr output from a proxy subcommand, without having to deliberately configure the subsidiary Plink into verbose mode. However, this is an initial implementation only, and it doesn't yet support the _big_ payoff for doing this in-process, which (I hope) will be the ability to handle interactive prompts from the subsidiary SSH connection via the same user interface as the primary one. For example, you might need to answer two password prompts in succession, or (the first time you use a session configured this way) confirm the host keys for both proxy and destination SSH servers. Comments in the new source file discuss some design thoughts on filling in this gap. For the moment, if the proxy SSH connection encounters any situation where an interactive prompt is needed, it will make the safe assumption, the same way 'plink -batch' would do. So it's at least no _worse_ than the existing technique of putting the proxy connection in a subprocess.
2021-05-22 11:51:23 +00:00
${CMAKE_SOURCE_DIR}/nosshproxy.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
pty.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
target_link_libraries(pterm
Break up gtkmisc.c. It's another file that should have been subdivided into lots of tiny separate things in the utils library - especially since for some reason I made a completely separate 'guimisc' cmake-level library for it when there was no need.
2021-04-24 06:51:15 +00:00
guiterminal eventloop settings charset utils
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${GTK_LIBRARIES} ${X11_LIBRARIES})
installed_program(pterm)
add_executable(ptermapp
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
pterm.c
main-gtk-application.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/nocmdline.c
${CMAKE_SOURCE_DIR}/be_none.c
${CMAKE_SOURCE_DIR}/nogss.c
Initial support for in-process proxy SSH connections. This introduces a new entry to the radio-button list of proxy types, in which the 'Proxy host' box is taken to be the name of an SSH server or saved session. We make an entire subsidiary SSH connection to that host, open a direct-tcpip channel through it, and use that as the connection over which to run the primary network connection. The result is basically the same as if you used a local proxy subprocess, with a command along the lines of 'plink -batch %proxyhost -nc %host:%port'. But it's all done in-process, by having an SshProxy object implement the Socket trait to talk to the main connection, and implement Seat and LogPolicy to talk to its subsidiary SSH backend. All the refactoring in recent years has got us to the point where we can do that without both SSH instances fighting over some global variable or unique piece of infrastructure. From an end user perspective, doing SSH proxying in-process like this is a little bit easier to set up: it doesn't require you to bake the full pathname of Plink into your saved session (or to have it on the system PATH), and the SshProxy setup function automatically turns off SSH features that would be inappropriate in this context, such as additional port forwardings, or acting as a connection-sharing upstream. And it has minor advantages like getting the Event Log for the subsidiary connection interleaved in the main Event Log, as if it were stderr output from a proxy subcommand, without having to deliberately configure the subsidiary Plink into verbose mode. However, this is an initial implementation only, and it doesn't yet support the _big_ payoff for doing this in-process, which (I hope) will be the ability to handle interactive prompts from the subsidiary SSH connection via the same user interface as the primary one. For example, you might need to answer two password prompts in succession, or (the first time you use a session configured this way) confirm the host keys for both proxy and destination SSH servers. Comments in the new source file discuss some design thoughts on filling in this gap. For the moment, if the proxy SSH connection encounters any situation where an interactive prompt is needed, it will make the safe assumption, the same way 'plink -batch' would do. So it's at least no _worse_ than the existing technique of putting the proxy connection in a subprocess.
2021-05-22 11:51:23 +00:00
${CMAKE_SOURCE_DIR}/nosshproxy.c
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
pty.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
target_link_libraries(ptermapp
Break up gtkmisc.c. It's another file that should have been subdivided into lots of tiny separate things in the utils library - especially since for some reason I made a completely separate 'guimisc' cmake-level library for it when there was no need.
2021-04-24 06:51:15 +00:00
guiterminal eventloop settings charset utils
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${GTK_LIBRARIES} ${X11_LIBRARIES})
add_executable(putty
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
putty.c
main-gtk-simple.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/be_all_s.c)
target_link_libraries(putty
Break up gtkmisc.c. It's another file that should have been subdivided into lots of tiny separate things in the utils library - especially since for some reason I made a completely separate 'guimisc' cmake-level library for it when there was no need.
2021-04-24 06:51:15 +00:00
guiterminal eventloop sshclient otherbackends settings
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
network crypto charset utils
${GTK_LIBRARIES} ${X11_LIBRARIES})
set_target_properties(putty
PROPERTIES LINK_INTERFACE_MULTIPLICITY 2)
installed_program(putty)
add_executable(puttyapp
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
putty.c
main-gtk-application.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/nocmdline.c
${CMAKE_SOURCE_DIR}/be_all_s.c)
target_link_libraries(puttyapp
Break up gtkmisc.c. It's another file that should have been subdivided into lots of tiny separate things in the utils library - especially since for some reason I made a completely separate 'guimisc' cmake-level library for it when there was no need.
2021-04-24 06:51:15 +00:00
guiterminal eventloop sshclient otherbackends settings
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
network crypto charset utils
${GTK_LIBRARIES} ${X11_LIBRARIES})
add_executable(puttytel
Rename most of the platform source files. This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes which made filenames annoying to type and to tab-complete. Also, as with my other recent renaming sprees, I've taken the opportunity to expand and clarify some of the names so that they're not such cryptic abbreviations.
2021-04-23 05:19:05 +00:00
putty.c
main-gtk-simple.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${CMAKE_SOURCE_DIR}/be_nos_s.c
${CMAKE_SOURCE_DIR}/nogss.c
${CMAKE_SOURCE_DIR}/norand.c
Initial support for in-process proxy SSH connections. This introduces a new entry to the radio-button list of proxy types, in which the 'Proxy host' box is taken to be the name of an SSH server or saved session. We make an entire subsidiary SSH connection to that host, open a direct-tcpip channel through it, and use that as the connection over which to run the primary network connection. The result is basically the same as if you used a local proxy subprocess, with a command along the lines of 'plink -batch %proxyhost -nc %host:%port'. But it's all done in-process, by having an SshProxy object implement the Socket trait to talk to the main connection, and implement Seat and LogPolicy to talk to its subsidiary SSH backend. All the refactoring in recent years has got us to the point where we can do that without both SSH instances fighting over some global variable or unique piece of infrastructure. From an end user perspective, doing SSH proxying in-process like this is a little bit easier to set up: it doesn't require you to bake the full pathname of Plink into your saved session (or to have it on the system PATH), and the SshProxy setup function automatically turns off SSH features that would be inappropriate in this context, such as additional port forwardings, or acting as a connection-sharing upstream. And it has minor advantages like getting the Event Log for the subsidiary connection interleaved in the main Event Log, as if it were stderr output from a proxy subcommand, without having to deliberately configure the subsidiary Plink into verbose mode. However, this is an initial implementation only, and it doesn't yet support the _big_ payoff for doing this in-process, which (I hope) will be the ability to handle interactive prompts from the subsidiary SSH connection via the same user interface as the primary one. For example, you might need to answer two password prompts in succession, or (the first time you use a session configured this way) confirm the host keys for both proxy and destination SSH servers. Comments in the new source file discuss some design thoughts on filling in this gap. For the moment, if the proxy SSH connection encounters any situation where an interactive prompt is needed, it will make the safe assumption, the same way 'plink -batch' would do. So it's at least no _worse_ than the existing technique of putting the proxy connection in a subprocess.
2021-05-22 11:51:23 +00:00
${CMAKE_SOURCE_DIR}/nocproxy.c
${CMAKE_SOURCE_DIR}/nosshproxy.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
target_link_libraries(puttytel
Break up gtkmisc.c. It's another file that should have been subdivided into lots of tiny separate things in the utils library - especially since for some reason I made a completely separate 'guimisc' cmake-level library for it when there was no need.
2021-04-24 06:51:15 +00:00
guiterminal eventloop otherbackends settings network charset utils
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
${GTK_LIBRARIES} ${X11_LIBRARIES})
endif()
Reference in New Issue Copy Permalink