nhyatt/putty-source
1
0
Fork 0
mirror of https://git.tartarus.org/simon/putty.git synced 2025-01-09 17:38:00 +00:00
Code Issues Projects Releases Wiki Activity
f955300576
putty-source/ssh2userauth.c

1911 lines
77 KiB
C
Raw Normal View History

Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
Add an actual SSH server program. This server is NOT SECURE! If anyone is reading this commit message, DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to speak the server end of everything PuTTY speaks on the client side, so that I can test that I haven't broken PuTTY when I reorganise its code, even things like RSA key exchange or chained auth methods which it's hard to find a server that speaks at all. (For this reason, it's declared with [UT] in the Recipe file, so that it falls into the same category as programs like testbn, which won't be installed by 'make install'.) Working title is 'Uppity', partly for 'Universal PuTTY Protocol Interaction Test Yoke', but mostly because it looks quite like the word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a very rarely used term meaning something not altogether unlike 'test harness', which is a bit of a stretch, but it'll do.) It doesn't actually _support_ everything I want yet. At the moment, it's a proof of concept only. But it has most of the machinery present, and the parts it's missing - such as chained auth methods - should be easy enough to add because I've built in the required flexibility, in the form of an AuthPolicy object which can request them if it wants to. However, the current AuthPolicy object is entirely trivial, and will let in any user with the password "weasel". (Another way in which this is not a production-ready server is that it also has no interaction with the OS's authentication system. In particular, it will not only let in any user with the same password, but it won't even change uid - it will open shells and forwardings under whatever user id you started it up as.) Currently, the program can only speak the SSH protocol on its standard I/O channels (using the new FdSocket facility), so if you want it to listen on a network port, you'll have to run it from some kind of separate listening program similar to inetd. For my own tests, I'm not even doing that: I'm just having PuTTY spawn it as a local proxy process, which also conveniently eliminates the risk of anyone hostile connecting to it. The bulk of the actual code reorganisation is already done by previous commits, so this change is _mostly_ just dropping in a new set of server-specific source files alongside the client-specific ones I created recently. The remaining changes in the shared SSH code are numerous, but all minor: - a few extra parameters to BPP and PPL constructors (e.g. 'are you in server mode?'), and pass both sets of SSH-1 protocol flags from the login to the connection layer - in server mode, unconditionally send our version string _before_ waiting for the remote one - a new hook in the SSH-1 BPP to handle enabling compression in server mode, where the message exchange works the other way round - new code in the SSH-2 BPP to do _deferred_ compression the other way round (the non-deferred version is still nicely symmetric) - in the SSH-2 transport layer, some adjustments to do key derivation either way round (swapping round the identifying letters in the various hash preimages, and making sure to list the KEXINITs in the right order) - also in the SSH-2 transport layer, an if statement that controls whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or vice versa - new ConnectionLayer methods for opening outgoing channels for X and agent forwardings - new functions in portfwd.c to establish listening sockets suitable for remote-to-local port forwarding (i.e. not under the direction of a Conf the way it's done on the client side).
2018-10-20 21:09:54 +00:00
* Packet protocol layer for the client side of the SSH-2 userauth
* protocol (RFC 4252).
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
*/
#include <assert.h>
#include "putty.h"
#include "ssh.h"
#include "sshbpp.h"
#include "sshppl.h"
#include "sshcr.h"
#ifndef NO_GSSAPI
#include "sshgssc.h"
#include "sshgss.h"
#endif
#define BANNER_LIMIT 131072
struct ssh2_userauth_state {
int crState;
PacketProtocolLayer *transport_layer, *successor_layer;
Filename *keyfile;
Reinstate functionality of CONF_ssh_show_banner. Apparently this option to not display the authentication banner got completely lost during the breakup of the old monolithic ssh.c.
2019-03-27 22:27:30 +00:00
bool show_banner, tryagent, change_username;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
char *hostname, *fullhostname;
char *default_username;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool try_ki_auth, try_gssapi_auth, try_gssapi_kex_auth, gssapi_fwd;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
ptrlen session_id;
enum {
AUTH_TYPE_NONE,
AUTH_TYPE_PUBLICKEY,
AUTH_TYPE_PUBLICKEY_OFFER_LOUD,
AUTH_TYPE_PUBLICKEY_OFFER_QUIET,
AUTH_TYPE_PASSWORD,
AUTH_TYPE_GSSAPI, /* always QUIET */
AUTH_TYPE_KEYBOARD_INTERACTIVE,
AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET
} type;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool need_pw, can_pubkey, can_passwd, can_keyb_inter;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
int userpass_ret;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool tried_pubkey_config, done_agent;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
struct ssh_connection_shared_gss_state *shgss;
#ifndef NO_GSSAPI
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool can_gssapi;
bool can_gssapi_keyex_auth;
bool tried_gssapi;
bool tried_gssapi_keyex_auth;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
time_t gss_cred_expiry;
Ssh_gss_buf gss_buf;
Ssh_gss_buf gss_rcvtok, gss_sndtok;
Ssh_gss_stat gss_stat;
#endif
Avoid hanging on GSSAPI acquire_cred failure. If GSSAPI authentication fails because we call the GSS acquire_cred function on the client side and find it doesn't give us anything useful, then that authentication attempt has to terminate - but since _we_ decided to terminate it, on the client side, the server will be sending us neither a formal USERAUTH_FAILURE nor any other kind of packet. So when we go back round to the top of the auth loop, we have to avoid _either_ assuming we're sitting on a USERAUTH_FAILURE we can parse for its method list, _or_ waiting to receive one. Instead we just have to push on and try the next auth method in the list from the last USERAUTH_FAILURE we did see. Hence, a new flag lets us suppress the usual behaviour of waiting until we have a response packet on the queue, and then all references to pktin after that are tested for NULL.
2018-12-06 18:08:56 +00:00
bool suppress_wait_for_response_packet;
Retain permitted methods list in userauth layer state. There are situations - or _should_ be, at any rate - in which we terminate a userauth attempt without having received a USERAUTH_FAILURE from the server, which means that we can't depend on always starting a userauth loop iteration by extracting the server's list of permitted methods from the current failure message. If there isn't a current failure message, the best we can do is remember the state from last time. That's already what we do for actually deciding which methods to attempt (we set s->can_foo from the methods string). But we should also keep the full original version of the string, for use in error message.
2018-12-06 18:06:15 +00:00
strbuf *last_methods_string;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool kbd_inter_refused;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
prompts_t *cur_prompt;
keyboard-interactive auth: use a uint32 for num_prompts. While testing the previous fix, I also noticed that s->num_prompts is an ordinary signed int. So if the server sends a _really_ large value, it'll be treated as negative. That's kind of harmless: our loop wouldn't read any prompts at all from the packet, and then it would send back the same nonsense count with no responses. But it's inelegant: now, if the server violates the protocol in this way, we respond by sending an even wronger packet in return. Changed the type of num_prompts and the loop variable to uint32_t, so now we'll respond by actually trying to read that many prompts, which will fail by reaching the new error check. I think that's a more sensible way to handle this one.
2019-05-05 09:10:54 +00:00
uint32_t num_prompts;
Fix a more complicated memory leak. The field s->username in the ssh2userauth state was sometimes a secondary reference to s->default_username, and sometimes a dynamically allocated string. So not freeing it can leak memory, but freeing it (if non-null) can cause a double-free crash. Solution: add a new field s->locally_allocated_username which is the thing that needs freeing (if any), and make s->username into a const char * which is always a secondary reference to _something_.
2019-07-06 17:06:04 +00:00
const char *username;
char *locally_allocated_username;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
char *password;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool got_username;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
strbuf *publickey_blob;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool privatekey_available, privatekey_encrypted;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
char *publickey_algorithm;
char *publickey_comment;
void *agent_response_to_free;
ptrlen agent_response;
BinarySource asrc[1]; /* for reading SSH agent response */
size_t pkblob_pos_in_agent;
int keyi, nkeys;
ptrlen pk, alg, comment;
int len;
PktOut *pktout;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool want_user_input;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
agent_pending_query *auth_agent_query;
bufchain banner;
Use StripCtrlChars to sanitise the SSH banner. Now the banner can contain printable Unicode while still having escape characters removed, in a way that works in both console and GUI applications. In the case of SSH banners, ssh2userauth.c does the sanitisation itself, so it has to use the new Seat method to get an appropriately configured StripCtrlChars. (This wasn't an issue for the prompts_t system, because sanitisation of prompt text is devolved to the local implementation of the prompt system, in case a local implementation wants to present prompts in a way that doesn't need sanitisation in any case, e.g. a dialog box.)
2019-03-05 21:13:48 +00:00
bufchain_sink banner_bs;
StripCtrlChars *banner_scc;
bool banner_scc_initialised;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
StripCtrlChars *ki_scc;
bool ki_scc_initialised;
bool ki_printed_header;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
PacketProtocolLayer ppl;
};
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
static void ssh2_userauth_free(PacketProtocolLayer *);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
static void ssh2_userauth_process_queue(PacketProtocolLayer *);
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
static bool ssh2_userauth_get_specials(
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
PacketProtocolLayer *ppl, add_special_fn_t add_special, void *ctx);
static void ssh2_userauth_special_cmd(PacketProtocolLayer *ppl,
SessionSpecialCode code, int arg);
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
static bool ssh2_userauth_want_user_input(PacketProtocolLayer *ppl);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
static void ssh2_userauth_got_user_input(PacketProtocolLayer *ppl);
static void ssh2_userauth_reconfigure(PacketProtocolLayer *ppl, Conf *conf);
static void ssh2_userauth_agent_query(struct ssh2_userauth_state *, strbuf *);
static void ssh2_userauth_agent_callback(void *, void *, int);
static void ssh2_userauth_add_sigblob(
struct ssh2_userauth_state *s, PktOut *pkt, ptrlen pkblob, ptrlen sigblob);
static void ssh2_userauth_add_session_id(
struct ssh2_userauth_state *s, strbuf *sigdata);
#ifndef NO_GSSAPI
static PktOut *ssh2_userauth_gss_packet(
struct ssh2_userauth_state *s, const char *authtype);
#endif
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
static void ssh2_userauth_antispoof_msg(
struct ssh2_userauth_state *s, const char *msg);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
static const struct PacketProtocolLayerVtable ssh2_userauth_vtable = {
ssh2_userauth_free,
ssh2_userauth_process_queue,
ssh2_userauth_get_specials,
ssh2_userauth_special_cmd,
ssh2_userauth_want_user_input,
ssh2_userauth_got_user_input,
ssh2_userauth_reconfigure,
Account for packet queues in ssh_sendbuffer(). Ever since I reworked the SSH code to have multiple internal packet queues, there's been a long-standing FIXME in ssh_sendbuffer() saying that we ought to include the data buffered in those queues as part of reporting how much data is buffered on standard input. Recently a user reported that 'proftpd', or rather its 'mod_sftp' add-on that implements an SFTP-only SSH server, exposes a bug related to that missing piece of code. The xfer_upload system in sftp.c starts by pushing SFTP write messages into the SSH code for as long as sftp_sendbuffer() (which ends up at ssh_sendbuffer()) reports that not too much data is buffered locally. In fact what happens is that all those messages end up on the packet queues between SSH protocol layers, so they're not counted by sftp_sendbuffer(), so we just keep going until there's some other reason to stop. Usually the reason we stop is because we've filled up the SFTP channel's SSH-layer window, so we need the server to send us a WINDOW_ADJUST before we're allowed to send any more data. So we return to the main event loop and start waiting for reply packets. And when the window is moderate (e.g. OpenSSH currently seems to present about 2MB), this isn't really noticeable. But proftpd presents the maximum-size window of 2^32-1 bytes, and as a result we just keep shovelling more and more packets into the internal packet queues until PSFTP has grown to 4GB in size, and only then do we even return to the event loop and start actually sending them down the network. Moreover, this happens again at rekey time, because while a rekey is in progress, ssh2transport stops emptying the queue of outgoing packets sent by its higher layer - so, again, everything just keeps buffering up somewhere that sftp_sendbuffer can't see it. But this commit fixes it! Each PacketProtocolLayer now provides a vtable method for asking how much data it currently has queued. Most of them share a default implementation which just returns the newly added total_size field from their pq_out; the exception is ssh2transport, which also has to account for data queued in its higher layer. And ssh_sendbuffer() adds that on to the quantity it already knew about in other locations, to give a more realistic idea of the currently buffered data. (cherry picked from commit cd97b7e7ea37ee146a2797350f61d77f66dd3d8b)
2020-02-05 19:34:29 +00:00
ssh_ppl_default_queued_data_size,
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
"ssh-userauth",
};
PacketProtocolLayer *ssh2_userauth_new(
PacketProtocolLayer *successor_layer,
const char *hostname, const char *fullhostname,
Reinstate functionality of CONF_ssh_show_banner. Apparently this option to not display the authentication banner got completely lost during the breakup of the old monolithic ssh.c.
2019-03-27 22:27:30 +00:00
Filename *keyfile, bool show_banner, bool tryagent,
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
const char *default_username, bool change_username,
bool try_ki_auth, bool try_gssapi_auth, bool try_gssapi_kex_auth,
bool gssapi_fwd, struct ssh_connection_shared_gss_state *shgss)
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
{
struct ssh2_userauth_state *s = snew(struct ssh2_userauth_state);
memset(s, 0, sizeof(*s));
s->ppl.vt = &ssh2_userauth_vtable;
s->successor_layer = successor_layer;
s->hostname = dupstr(hostname);
s->fullhostname = dupstr(fullhostname);
s->keyfile = filename_copy(keyfile);
Reinstate functionality of CONF_ssh_show_banner. Apparently this option to not display the authentication banner got completely lost during the breakup of the old monolithic ssh.c.
2019-03-27 22:27:30 +00:00
s->show_banner = show_banner;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->tryagent = tryagent;
s->default_username = dupstr(default_username);
s->change_username = change_username;
s->try_ki_auth = try_ki_auth;
s->try_gssapi_auth = try_gssapi_auth;
s->try_gssapi_kex_auth = try_gssapi_kex_auth;
s->gssapi_fwd = gssapi_fwd;
s->shgss = shgss;
Retain permitted methods list in userauth layer state. There are situations - or _should_ be, at any rate - in which we terminate a userauth attempt without having received a USERAUTH_FAILURE from the server, which means that we can't depend on always starting a userauth loop iteration by extracting the server's list of permitted methods from the current failure message. If there isn't a current failure message, the best we can do is remember the state from last time. That's already what we do for actually deciding which methods to attempt (we set s->can_foo from the methods string). But we should also keep the full original version of the string, for use in error message.
2018-12-06 18:06:15 +00:00
s->last_methods_string = strbuf_new();
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
bufchain_init(&s->banner);
Use StripCtrlChars to sanitise the SSH banner. Now the banner can contain printable Unicode while still having escape characters removed, in a way that works in both console and GUI applications. In the case of SSH banners, ssh2userauth.c does the sanitisation itself, so it has to use the new Seat method to get an appropriately configured StripCtrlChars. (This wasn't an issue for the prompts_t system, because sanitisation of prompt text is devolved to the local implementation of the prompt system, in case a local implementation wants to present prompts in a way that doesn't need sanitisation in any case, e.g. a dialog box.)
2019-03-05 21:13:48 +00:00
bufchain_sink_init(&s->banner_bs, &s->banner);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
return &s->ppl;
}
void ssh2_userauth_set_transport_layer(PacketProtocolLayer *userauth,
PacketProtocolLayer *transport)
{
struct ssh2_userauth_state *s =
Rename FROMFIELD to 'container_of'. Ian Jackson points out that the Linux kernel has a macro of this name with the same purpose, and suggests that it's a good idea to use the same name as they do, so that at least some people reading one code base might recognise it from the other. I never really thought very hard about what order FROMFIELD's parameters should go in, and therefore I'm pleasantly surprised to find that my order agrees with the kernel's, so I don't have to permute every call site as part of making this change :-)
2018-10-05 22:49:08 +00:00
container_of(userauth, struct ssh2_userauth_state, ppl);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->transport_layer = transport;
}
static void ssh2_userauth_free(PacketProtocolLayer *ppl)
{
struct ssh2_userauth_state *s =
Rename FROMFIELD to 'container_of'. Ian Jackson points out that the Linux kernel has a macro of this name with the same purpose, and suggests that it's a good idea to use the same name as they do, so that at least some people reading one code base might recognise it from the other. I never really thought very hard about what order FROMFIELD's parameters should go in, and therefore I'm pleasantly surprised to find that my order agrees with the kernel's, so I don't have to permute every call site as part of making this change :-)
2018-10-05 22:49:08 +00:00
container_of(ppl, struct ssh2_userauth_state, ppl);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
bufchain_clear(&s->banner);
if (s->successor_layer)
ssh_ppl_free(s->successor_layer);
sfree(s->agent_response_to_free);
if (s->auth_agent_query)
agent_cancel_query(s->auth_agent_query);
filename_free(s->keyfile);
sfree(s->default_username);
Fix a more complicated memory leak. The field s->username in the ssh2userauth state was sometimes a secondary reference to s->default_username, and sometimes a dynamically allocated string. So not freeing it can leak memory, but freeing it (if non-null) can cause a double-free crash. Solution: add a new field s->locally_allocated_username which is the thing that needs freeing (if any), and make s->username into a const char * which is always a secondary reference to _something_.
2019-07-06 17:06:04 +00:00
sfree(s->locally_allocated_username);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
sfree(s->hostname);
sfree(s->fullhostname);
Fix assorted memory leaks. Affects command-line PuTTYgen, PSFTP, and anything running the SSH-2 userauth client layer. Tweaked version of a patch due to Tim Kosse.
2019-07-06 16:44:15 +00:00
sfree(s->publickey_comment);
sfree(s->publickey_algorithm);
if (s->publickey_blob)
strbuf_free(s->publickey_blob);
Retain permitted methods list in userauth layer state. There are situations - or _should_ be, at any rate - in which we terminate a userauth attempt without having received a USERAUTH_FAILURE from the server, which means that we can't depend on always starting a userauth loop iteration by extracting the server's list of permitted methods from the current failure message. If there isn't a current failure message, the best we can do is remember the state from last time. That's already what we do for actually deciding which methods to attempt (we set s->can_foo from the methods string). But we should also keep the full original version of the string, for use in error message.
2018-12-06 18:06:15 +00:00
strbuf_free(s->last_methods_string);
Use StripCtrlChars to sanitise the SSH banner. Now the banner can contain printable Unicode while still having escape characters removed, in a way that works in both console and GUI applications. In the case of SSH banners, ssh2userauth.c does the sanitisation itself, so it has to use the new Seat method to get an appropriately configured StripCtrlChars. (This wasn't an issue for the prompts_t system, because sanitisation of prompt text is devolved to the local implementation of the prompt system, in case a local implementation wants to present prompts in a way that doesn't need sanitisation in any case, e.g. a dialog box.)
2019-03-05 21:13:48 +00:00
if (s->banner_scc)
stripctrl_free(s->banner_scc);
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
if (s->ki_scc)
stripctrl_free(s->ki_scc);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
sfree(s);
}
static void ssh2_userauth_filter_queue(struct ssh2_userauth_state *s)
{
PktIn *pktin;
ptrlen string;
while ((pktin = pq_peek(s->ppl.in_pq)) != NULL) {
switch (pktin->type) {
case SSH2_MSG_USERAUTH_BANNER:
Reinstate functionality of CONF_ssh_show_banner. Apparently this option to not display the authentication banner got completely lost during the breakup of the old monolithic ssh.c.
2019-03-27 22:27:30 +00:00
if (!s->show_banner) {
pq_pop(s->ppl.in_pq);
break;
}
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
string = get_string(pktin);
if (string.len > BANNER_LIMIT - bufchain_size(&s->banner))
string.len = BANNER_LIMIT - bufchain_size(&s->banner);
Use StripCtrlChars to sanitise the SSH banner. Now the banner can contain printable Unicode while still having escape characters removed, in a way that works in both console and GUI applications. In the case of SSH banners, ssh2userauth.c does the sanitisation itself, so it has to use the new Seat method to get an appropriately configured StripCtrlChars. (This wasn't an issue for the prompts_t system, because sanitisation of prompt text is devolved to the local implementation of the prompt system, in case a local implementation wants to present prompts in a way that doesn't need sanitisation in any case, e.g. a dialog box.)
2019-03-05 21:13:48 +00:00
if (!s->banner_scc_initialised) {
s->banner_scc = seat_stripctrl_new(
Revise the API for seat_stripctrl_new. Now instead of taking raw arguments to configure the output StripCtrlChars with, it takes an enumerated value giving the context of what's being sanitised, and allows the seat to decide what the output parameters for that context should be. The only context currently used is SIC_BANNER (SSH login banners). I've also added a not-yet-used one for keyboard-interactive prompts.
2019-03-07 08:19:38 +00:00
s->ppl.seat, BinarySink_UPCAST(&s->banner_bs), SIC_BANNER);
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
if (s->banner_scc)
stripctrl_enable_line_limiting(s->banner_scc);
Use StripCtrlChars to sanitise the SSH banner. Now the banner can contain printable Unicode while still having escape characters removed, in a way that works in both console and GUI applications. In the case of SSH banners, ssh2userauth.c does the sanitisation itself, so it has to use the new Seat method to get an appropriately configured StripCtrlChars. (This wasn't an issue for the prompts_t system, because sanitisation of prompt text is devolved to the local implementation of the prompt system, in case a local implementation wants to present prompts in a way that doesn't need sanitisation in any case, e.g. a dialog box.)
2019-03-05 21:13:48 +00:00
s->banner_scc_initialised = true;
}
if (s->banner_scc)
put_datapl(s->banner_scc, string);
else
put_datapl(&s->banner_bs, string);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
pq_pop(s->ppl.in_pq);
break;
default:
return;
}
}
}
static PktIn *ssh2_userauth_pop(struct ssh2_userauth_state *s)
{
ssh2_userauth_filter_queue(s);
return pq_pop(s->ppl.in_pq);
}
static void ssh2_userauth_process_queue(PacketProtocolLayer *ppl)
{
struct ssh2_userauth_state *s =
Rename FROMFIELD to 'container_of'. Ian Jackson points out that the Linux kernel has a macro of this name with the same purpose, and suggests that it's a good idea to use the same name as they do, so that at least some people reading one code base might recognise it from the other. I never really thought very hard about what order FROMFIELD's parameters should go in, and therefore I'm pleasantly surprised to find that my order agrees with the kernel's, so I don't have to permute every call site as part of making this change :-)
2018-10-05 22:49:08 +00:00
container_of(ppl, struct ssh2_userauth_state, ppl);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
PktIn *pktin;
ssh2_userauth_filter_queue(s); /* no matter why we were called */
crBegin(s->crState);
#ifndef NO_GSSAPI
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->tried_gssapi = false;
s->tried_gssapi_keyex_auth = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
#endif
/*
* Misc one-time setup for authentication.
*/
s->publickey_blob = NULL;
s->session_id = ssh2_transport_get_session_id(s->transport_layer);
/*
* Load the public half of any configured public key file for
* later use.
*/
if (!filename_is_null(s->keyfile)) {
int keytype;
Remove a load of obsolete printf string limits. In the previous commit I happened to notice a %.150s in a ppl_logevent call, which was probably an important safety precaution a couple of decades ago when that format string was being used for an sprintf into a fixed-size buffer, but now it's just pointless cruft. This commit removes all printf string formatting directives with a compile-time fixed size, with the one exception of a %.3s used to cut out a 3-letter month name in scpserver.c. In cases where the format string in question was already going to an arbitrary-length function like dupprintf or ppl_logevent, that's all I've done; in cases where there was still a fixed-size buffer, I've replaced it with a dynamic buffer and dupprintf.
2018-12-08 21:03:51 +00:00
ppl_logevent("Reading key file \"%s\"",
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
filename_to_str(s->keyfile));
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
keytype = key_type(s->keyfile);
if (keytype == SSH_KEYTYPE_SSH2 ||
keytype == SSH_KEYTYPE_SSH2_PUBLIC_RFC4716 ||
keytype == SSH_KEYTYPE_SSH2_PUBLIC_OPENSSH) {
const char *error;
s->publickey_blob = strbuf_new();
if (ssh2_userkey_loadpub(s->keyfile,
&s->publickey_algorithm,
BinarySink_UPCAST(s->publickey_blob),
&s->publickey_comment, &error)) {
s->privatekey_available = (keytype == SSH_KEYTYPE_SSH2);
if (!s->privatekey_available)
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Key file contains public key only");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->privatekey_encrypted =
ssh2_userkey_encrypted(s->keyfile, NULL);
} else {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Unable to load key (%s)", error);
ppl_printf("Unable to load key file \"%s\" (%s)\r\n",
filename_to_str(s->keyfile), error);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
strbuf_free(s->publickey_blob);
s->publickey_blob = NULL;
}
} else {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Unable to use this key file (%s)",
key_type_to_str(keytype));
ppl_printf("Unable to use key file \"%s\" (%s)\r\n",
filename_to_str(s->keyfile),
key_type_to_str(keytype));
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->publickey_blob = NULL;
}
}
/*
* Find out about any keys Pageant has (but if there's a public
* key configured, filter out all others).
*/
s->nkeys = 0;
s->pkblob_pos_in_agent = 0;
if (s->tryagent && agent_exists()) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Pageant is running. Requesting keys.");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* Request the keys held by the agent. */
{
strbuf *request = strbuf_new_for_agent_query();
put_byte(request, SSH2_AGENTC_REQUEST_IDENTITIES);
ssh2_userauth_agent_query(s, request);
strbuf_free(request);
crWaitUntilV(!s->auth_agent_query);
}
Add and use BinarySource_*INIT_PL. A great many BinarySource_BARE_INIT calls are passing the two halves of a ptrlen as separate arguments. It saves a lot of call-site faff to have a variant of the init function that just takes the whole ptrlen in one go.
2019-02-06 20:47:18 +00:00
BinarySource_BARE_INIT_PL(s->asrc, s->agent_response);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
get_uint32(s->asrc); /* skip length field */
if (get_byte(s->asrc) == SSH2_AGENT_IDENTITIES_ANSWER) {
int keyi;
s->nkeys = toint(get_uint32(s->asrc));
/*
* Vet the Pageant response to ensure that the key count
* and blob lengths make sense.
*/
if (s->nkeys < 0) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Pageant response contained a negative"
" key count %d", s->nkeys);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->nkeys = 0;
goto done_agent_query;
} else {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Pageant has %d SSH-2 keys", s->nkeys);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* See if configured key is in agent. */
for (keyi = 0; keyi < s->nkeys; keyi++) {
size_t pos = s->asrc->pos;
ptrlen blob = get_string(s->asrc);
get_string(s->asrc); /* skip comment */
if (get_err(s->asrc)) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Pageant response was truncated");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->nkeys = 0;
goto done_agent_query;
}
if (s->publickey_blob &&
blob.len == s->publickey_blob->len &&
!memcmp(blob.ptr, s->publickey_blob->s,
s->publickey_blob->len)) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Pageant key #%d matches "
"configured key file", keyi);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->keyi = keyi;
s->pkblob_pos_in_agent = pos;
break;
}
}
if (s->publickey_blob && !s->pkblob_pos_in_agent) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Configured key file not in Pageant");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->nkeys = 0;
}
}
} else {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Failed to get reply from Pageant");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
done_agent_query:;
}
/*
* We repeat this whole loop, including the username prompt,
* until we manage a successful authentication. If the user
* types the wrong _password_, they can be sent back to the
* beginning to try another username, if this is configured on.
* (If they specify a username in the config, they are never
* asked, even if they do give a wrong password.)
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
*
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
* I think this best serves the needs of
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
*
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
* - the people who have no configuration, no keys, and just
* want to try repeated (username,password) pairs until they
* type both correctly
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
*
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
* - people who have keys and configuration but occasionally
* need to fall back to passwords
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
*
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
* - people with a key held in Pageant, who might not have
* logged in to a particular machine before; so they want to
* type a username, and then _either_ their key will be
* accepted, _or_ they will type a password. If they mistype
* the username they will want to be able to get back and
* retype it!
*/
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->got_username = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
while (1) {
/*
* Get a username.
*/
ssh2userauth: fix sense of test for change_username! How embarrassing: we were looping back round to prompt for a username again if s->change_username was *true*, but then the test at the top would only have reissued the prompt if it was *false*. So that configuration checkbox must have been broken for ages. It's a good job most SSH servers don't reward enabling it!
2019-07-06 17:05:54 +00:00
if (s->got_username && !s->change_username) {
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* We got a username last time round this loop, and
* with change_username turned off we don't try to get
* it again.
*/
} else if ((s->username = s->default_username) == NULL) {
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->cur_prompt = new_prompts();
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->to_server = true;
Add a 'from_server' flag in prompts_t. This goes with the existing 'to_server' flag (indicating whether the values typed by the user are going to be sent over the wire or remain local), to indicate whether the _text of the prompts_ has come over the wire or is originated locally. Like to_server, nothing yet uses this. It's a hedge against the possibility of maybe having an option for all the auth prompts to work via GUI dialog boxes.
2019-03-09 15:50:23 +00:00
s->cur_prompt->from_server = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->cur_prompt->name = dupstr("SSH login name");
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
add_prompt(s->cur_prompt, dupstr("login as: "), true);
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, NULL);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
while (1) {
while (s->userpass_ret < 0 &&
bufchain_size(s->ppl.user_input) > 0)
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, s->ppl.user_input);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->userpass_ret >= 0)
break;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
crReturnV;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
if (!s->userpass_ret) {
/*
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
* seat_get_userpass_input() failed to get a username.
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
* Terminate.
*/
free_prompts(s->cur_prompt);
ssh_user_close(s->ppl.ssh, "No username provided");
return;
}
Fix a more complicated memory leak. The field s->username in the ssh2userauth state was sometimes a secondary reference to s->default_username, and sometimes a dynamically allocated string. So not freeing it can leak memory, but freeing it (if non-null) can cause a double-free crash. Solution: add a new field s->locally_allocated_username which is the thing that needs freeing (if any), and make s->username into a const char * which is always a secondary reference to _something_.
2019-07-06 17:06:04 +00:00
sfree(s->locally_allocated_username); /* for change_username */
s->username = s->locally_allocated_username =
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
prompt_get_result(s->cur_prompt->prompts[0]);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
free_prompts(s->cur_prompt);
} else {
if ((flags & FLAG_VERBOSE) || (flags & FLAG_INTERACTIVE))
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Using username \"%s\".\r\n", s->username);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->got_username = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Send an authentication request using method "none": (a)
* just in case it succeeds, and (b) so that we know what
* authentication methods we can usefully try next.
*/
s->ppl.bpp->pls->actx = SSH2_PKTCTX_NOAUTH;
s->pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "none"); /* method */
pq_push(s->ppl.out_pq, s->pktout);
s->type = AUTH_TYPE_NONE;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->tried_pubkey_config = false;
s->kbd_inter_refused = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* Reset agent request state. */
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->done_agent = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->agent_response.ptr) {
if (s->pkblob_pos_in_agent) {
s->asrc->pos = s->pkblob_pos_in_agent;
} else {
s->asrc->pos = 9; /* skip length + type + key count */
s->keyi = 0;
}
}
while (1) {
/*
Avoid hanging on GSSAPI acquire_cred failure. If GSSAPI authentication fails because we call the GSS acquire_cred function on the client side and find it doesn't give us anything useful, then that authentication attempt has to terminate - but since _we_ decided to terminate it, on the client side, the server will be sending us neither a formal USERAUTH_FAILURE nor any other kind of packet. So when we go back round to the top of the auth loop, we have to avoid _either_ assuming we're sitting on a USERAUTH_FAILURE we can parse for its method list, _or_ waiting to receive one. Instead we just have to push on and try the next auth method in the list from the last USERAUTH_FAILURE we did see. Hence, a new flag lets us suppress the usual behaviour of waiting until we have a response packet on the queue, and then all references to pktin after that are tested for NULL.
2018-12-06 18:08:56 +00:00
* Wait for the result of the last authentication request,
* unless the request terminated for some reason on our
* own side.
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
*/
Avoid hanging on GSSAPI acquire_cred failure. If GSSAPI authentication fails because we call the GSS acquire_cred function on the client side and find it doesn't give us anything useful, then that authentication attempt has to terminate - but since _we_ decided to terminate it, on the client side, the server will be sending us neither a formal USERAUTH_FAILURE nor any other kind of packet. So when we go back round to the top of the auth loop, we have to avoid _either_ assuming we're sitting on a USERAUTH_FAILURE we can parse for its method list, _or_ waiting to receive one. Instead we just have to push on and try the next auth method in the list from the last USERAUTH_FAILURE we did see. Hence, a new flag lets us suppress the usual behaviour of waiting until we have a response packet on the queue, and then all references to pktin after that are tested for NULL.
2018-12-06 18:08:56 +00:00
if (s->suppress_wait_for_response_packet) {
pktin = NULL;
s->suppress_wait_for_response_packet = false;
} else {
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
}
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Now is a convenient point to spew any banner material
* that we've accumulated. (This should ensure that when
* we exit the auth loop, we haven't any left to deal
* with.)
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
*
* Don't show the banner if we're operating in non-verbose
* non-interactive mode. (It's probably a script, which
* means nobody will read the banner _anyway_, and
* moreover the printing of the banner will screw up
* processing on the output of (say) plink.)
*
* The banner data has been sanitised already by this
* point, but we still need to precede and follow it with
* anti-spoofing header lines.
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
*/
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
if (bufchain_size(&s->banner) &&
(flags & (FLAG_VERBOSE | FLAG_INTERACTIVE))) {
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
if (s->banner_scc) {
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
ssh2_userauth_antispoof_msg(
s, "Pre-authentication banner message from server:");
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
seat_set_trust_status(s->ppl.seat, false);
}
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
bool mid_line = false;
while (bufchain_size(&s->banner) > 0) {
ptrlen data = bufchain_prefix(&s->banner);
seat_stderr_pl(s->ppl.seat, data);
mid_line =
(((const char *)data.ptr)[data.len-1] != '\n');
Fix use-after-free in banner handling. When we fetch a chunk of data from the banner bufchain, we have to read from it _before_ calling bufchain_consume.
2019-11-02 08:23:58 +00:00
bufchain_consume(&s->banner, data.len);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
bufchain_clear(&s->banner);
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
if (mid_line)
seat_stderr_pl(s->ppl.seat, PTRLEN_LITERAL("\r\n"));
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
if (s->banner_scc) {
seat_set_trust_status(s->ppl.seat, true);
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
ssh2_userauth_antispoof_msg(
s, "End of banner message from server");
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
}
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
Avoid hanging on GSSAPI acquire_cred failure. If GSSAPI authentication fails because we call the GSS acquire_cred function on the client side and find it doesn't give us anything useful, then that authentication attempt has to terminate - but since _we_ decided to terminate it, on the client side, the server will be sending us neither a formal USERAUTH_FAILURE nor any other kind of packet. So when we go back round to the top of the auth loop, we have to avoid _either_ assuming we're sitting on a USERAUTH_FAILURE we can parse for its method list, _or_ waiting to receive one. Instead we just have to push on and try the next auth method in the list from the last USERAUTH_FAILURE we did see. Hence, a new flag lets us suppress the usual behaviour of waiting until we have a response packet on the queue, and then all references to pktin after that are tested for NULL.
2018-12-06 18:08:56 +00:00
if (pktin && pktin->type == SSH2_MSG_USERAUTH_SUCCESS) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Access granted");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
goto userauth_success;
}
Avoid hanging on GSSAPI acquire_cred failure. If GSSAPI authentication fails because we call the GSS acquire_cred function on the client side and find it doesn't give us anything useful, then that authentication attempt has to terminate - but since _we_ decided to terminate it, on the client side, the server will be sending us neither a formal USERAUTH_FAILURE nor any other kind of packet. So when we go back round to the top of the auth loop, we have to avoid _either_ assuming we're sitting on a USERAUTH_FAILURE we can parse for its method list, _or_ waiting to receive one. Instead we just have to push on and try the next auth method in the list from the last USERAUTH_FAILURE we did see. Hence, a new flag lets us suppress the usual behaviour of waiting until we have a response packet on the queue, and then all references to pktin after that are tested for NULL.
2018-12-06 18:08:56 +00:00
if (pktin && pktin->type != SSH2_MSG_USERAUTH_FAILURE &&
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->type != AUTH_TYPE_GSSAPI) {
ssh_proto_error(s->ppl.ssh, "Received unexpected packet "
"in response to authentication request, "
"type %d (%s)", pktin->type,
ssh2_pkt_type(s->ppl.bpp->pls->kctx,
s->ppl.bpp->pls->actx,
pktin->type));
return;
}
/*
* OK, we're now sitting on a USERAUTH_FAILURE message, so
* we can look at the string in it and know what we can
* helpfully try next.
*/
Avoid hanging on GSSAPI acquire_cred failure. If GSSAPI authentication fails because we call the GSS acquire_cred function on the client side and find it doesn't give us anything useful, then that authentication attempt has to terminate - but since _we_ decided to terminate it, on the client side, the server will be sending us neither a formal USERAUTH_FAILURE nor any other kind of packet. So when we go back round to the top of the auth loop, we have to avoid _either_ assuming we're sitting on a USERAUTH_FAILURE we can parse for its method list, _or_ waiting to receive one. Instead we just have to push on and try the next auth method in the list from the last USERAUTH_FAILURE we did see. Hence, a new flag lets us suppress the usual behaviour of waiting until we have a response packet on the queue, and then all references to pktin after that are tested for NULL.
2018-12-06 18:08:56 +00:00
if (pktin && pktin->type == SSH2_MSG_USERAUTH_FAILURE) {
Retain permitted methods list in userauth layer state. There are situations - or _should_ be, at any rate - in which we terminate a userauth attempt without having received a USERAUTH_FAILURE from the server, which means that we can't depend on always starting a userauth loop iteration by extracting the server's list of permitted methods from the current failure message. If there isn't a current failure message, the best we can do is remember the state from last time. That's already what we do for actually deciding which methods to attempt (we set s->can_foo from the methods string). But we should also keep the full original version of the string, for use in error message.
2018-12-06 18:06:15 +00:00
ptrlen methods = get_string(pktin);
bool partial_success = get_bool(pktin);
if (!partial_success) {
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* We have received an unequivocal Access
* Denied. This can translate to a variety of
* messages, or no message at all.
*
* For forms of authentication which are attempted
* implicitly, by which I mean without printing
* anything in the window indicating that we're
* trying them, we should never print 'Access
* denied'.
*
* If we do print a message saying that we're
* attempting some kind of authentication, it's OK
* to print a followup message saying it failed -
* but the message may sometimes be more specific
* than simply 'Access denied'.
*
* Additionally, if we'd just tried password
* authentication, we should break out of this
* whole loop so as to go back to the username
* prompt (iff we're configured to allow
* username change attempts).
*/
if (s->type == AUTH_TYPE_NONE) {
/* do nothing */
} else if (s->type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD ||
s->type == AUTH_TYPE_PUBLICKEY_OFFER_QUIET) {
if (s->type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD)
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Server refused our key\r\n");
ppl_logevent("Server refused our key");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else if (s->type == AUTH_TYPE_PUBLICKEY) {
/* This _shouldn't_ happen except by a
* protocol bug causing client and server to
* disagree on what is a correct signature. */
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Server refused public-key signature"
" despite accepting key!\r\n");
ppl_logevent("Server refused public-key signature"
" despite accepting key!");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else if (s->type==AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET) {
/* quiet, so no ppl_printf */
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Server refused keyboard-interactive "
"authentication");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else if (s->type==AUTH_TYPE_GSSAPI) {
/* always quiet, so no ppl_printf */
/* also, the code down in the GSSAPI block has
* already logged this in the Event Log */
} else if (s->type == AUTH_TYPE_KEYBOARD_INTERACTIVE) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Keyboard-interactive authentication "
"failed");
ppl_printf("Access denied\r\n");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else {
assert(s->type == AUTH_TYPE_PASSWORD);
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Password authentication failed");
ppl_printf("Access denied\r\n");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->change_username) {
/* XXX perhaps we should allow
* keyboard-interactive to do this too? */
goto try_new_username;
}
}
} else {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Further authentication required\r\n");
ppl_logevent("Further authentication required");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
Retain permitted methods list in userauth layer state. There are situations - or _should_ be, at any rate - in which we terminate a userauth attempt without having received a USERAUTH_FAILURE from the server, which means that we can't depend on always starting a userauth loop iteration by extracting the server's list of permitted methods from the current failure message. If there isn't a current failure message, the best we can do is remember the state from last time. That's already what we do for actually deciding which methods to attempt (we set s->can_foo from the methods string). But we should also keep the full original version of the string, for use in error message.
2018-12-06 18:06:15 +00:00
/*
* Save the methods string for use in error messages.
*/
New functions to shrink a strbuf. These are better than my previous approach of just assigning to sb->len, because firstly they check by assertion that the new length is within range, and secondly they preserve the invariant that the byte stored in the buffer just after the length runs out is \0. Switched to using the new functions everywhere a grep could turn up opportunities. (cherry picked from commit 5891142aee5cab4aedd4a6be32e80fba806f3326)
2020-01-21 20:16:28 +00:00
strbuf_clear(s->last_methods_string);
New marshalling function put_datapl(). Just like put_data(), but takes a ptrlen rather than separate ptr and len arguments, so it saves a bit of repetition at call sites. I probably should have written this ages ago, but better late than never; I've also converted every call site I can find that needed it.
2019-01-01 19:00:19 +00:00
put_datapl(s->last_methods_string, methods);
Retain permitted methods list in userauth layer state. There are situations - or _should_ be, at any rate - in which we terminate a userauth attempt without having received a USERAUTH_FAILURE from the server, which means that we can't depend on always starting a userauth loop iteration by extracting the server's list of permitted methods from the current failure message. If there isn't a current failure message, the best we can do is remember the state from last time. That's already what we do for actually deciding which methods to attempt (we set s->can_foo from the methods string). But we should also keep the full original version of the string, for use in error message.
2018-12-06 18:06:15 +00:00
/*
* Scan it for method identifiers we know about.
*/
Remove the old in_commasep_string system. It's just silly to have _two_ systems for traversing a string of comma-separated protocol ids. I think the new get_commasep_word technique for looping over the elements of a string is simpler and more general than the old membership-testing approach, and also it's necessary for the modern KEX untangling system (which has to be able to loop over one string, even if it used a membership test to check things in the other). So this commit rewrites the two remaining uses of in_commasep_string to use get_commasep_word instead, and deletes the former.
2018-12-06 18:35:27 +00:00
bool srv_pubkey = false, srv_passwd = false;
Fix compilation with NO_GSSAPI. This is a fairly shallow patch, which removes the UI and interactions with external libraries. Some other machinery (which is dead code in this configuration) is left in place. Adapted by me from a patch by Jeroen Roovers.
2019-03-25 23:46:59 +00:00
bool srv_keyb_inter = false;
#ifndef NO_GSSAPI
bool srv_gssapi = false, srv_gssapi_keyex_auth = false;
#endif
Remove the old in_commasep_string system. It's just silly to have _two_ systems for traversing a string of comma-separated protocol ids. I think the new get_commasep_word technique for looping over the elements of a string is simpler and more general than the old membership-testing approach, and also it's necessary for the modern KEX untangling system (which has to be able to loop over one string, even if it used a membership test to check things in the other). So this commit rewrites the two remaining uses of in_commasep_string to use get_commasep_word instead, and deletes the former.
2018-12-06 18:35:27 +00:00
for (ptrlen method; get_commasep_word(&methods, &method) ;) {
if (ptrlen_eq_string(method, "publickey"))
srv_pubkey = true;
else if (ptrlen_eq_string(method, "password"))
srv_passwd = true;
else if (ptrlen_eq_string(method, "keyboard-interactive"))
srv_keyb_inter = true;
Fix compilation with NO_GSSAPI. This is a fairly shallow patch, which removes the UI and interactions with external libraries. Some other machinery (which is dead code in this configuration) is left in place. Adapted by me from a patch by Jeroen Roovers.
2019-03-25 23:46:59 +00:00
#ifndef NO_GSSAPI
Remove the old in_commasep_string system. It's just silly to have _two_ systems for traversing a string of comma-separated protocol ids. I think the new get_commasep_word technique for looping over the elements of a string is simpler and more general than the old membership-testing approach, and also it's necessary for the modern KEX untangling system (which has to be able to loop over one string, even if it used a membership test to check things in the other). So this commit rewrites the two remaining uses of in_commasep_string to use get_commasep_word instead, and deletes the former.
2018-12-06 18:35:27 +00:00
else if (ptrlen_eq_string(method, "gssapi-with-mic"))
srv_gssapi = true;
else if (ptrlen_eq_string(method, "gssapi-keyex"))
srv_gssapi_keyex_auth = true;
Fix compilation with NO_GSSAPI. This is a fairly shallow patch, which removes the UI and interactions with external libraries. Some other machinery (which is dead code in this configuration) is left in place. Adapted by me from a patch by Jeroen Roovers.
2019-03-25 23:46:59 +00:00
#endif
Remove the old in_commasep_string system. It's just silly to have _two_ systems for traversing a string of comma-separated protocol ids. I think the new get_commasep_word technique for looping over the elements of a string is simpler and more general than the old membership-testing approach, and also it's necessary for the modern KEX untangling system (which has to be able to loop over one string, even if it used a membership test to check things in the other). So this commit rewrites the two remaining uses of in_commasep_string to use get_commasep_word instead, and deletes the former.
2018-12-06 18:35:27 +00:00
}
/*
* And combine those flags with our own configuration
* and context to set the main can_foo variables.
*/
s->can_pubkey = srv_pubkey;
s->can_passwd = srv_passwd;
s->can_keyb_inter = s->try_ki_auth && srv_keyb_inter;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
#ifndef NO_GSSAPI
Remove the old in_commasep_string system. It's just silly to have _two_ systems for traversing a string of comma-separated protocol ids. I think the new get_commasep_word technique for looping over the elements of a string is simpler and more general than the old membership-testing approach, and also it's necessary for the modern KEX untangling system (which has to be able to loop over one string, even if it used a membership test to check things in the other). So this commit rewrites the two remaining uses of in_commasep_string to use get_commasep_word instead, and deletes the former.
2018-12-06 18:35:27 +00:00
s->can_gssapi = s->try_gssapi_auth && srv_gssapi &&
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->shgss->libs->nlibraries > 0;
Remove the old in_commasep_string system. It's just silly to have _two_ systems for traversing a string of comma-separated protocol ids. I think the new get_commasep_word technique for looping over the elements of a string is simpler and more general than the old membership-testing approach, and also it's necessary for the modern KEX untangling system (which has to be able to loop over one string, even if it used a membership test to check things in the other). So this commit rewrites the two remaining uses of in_commasep_string to use get_commasep_word instead, and deletes the former.
2018-12-06 18:35:27 +00:00
s->can_gssapi_keyex_auth = s->try_gssapi_kex_auth &&
srv_gssapi_keyex_auth &&
s->shgss->libs->nlibraries > 0 && s->shgss->ctx;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
#endif
}
s->ppl.bpp->pls->actx = SSH2_PKTCTX_NOAUTH;
#ifndef NO_GSSAPI
if (s->can_gssapi_keyex_auth && !s->tried_gssapi_keyex_auth) {
/* gssapi-keyex authentication */
s->type = AUTH_TYPE_GSSAPI;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->tried_gssapi_keyex_auth = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->ppl.bpp->pls->actx = SSH2_PKTCTX_GSSAPI;
if (s->shgss->lib->gsslogmsg)
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("%s", s->shgss->lib->gsslogmsg);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Trying gssapi-keyex...");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->pktout = ssh2_userauth_gss_packet(s, "gssapi-keyex");
pq_push(s->ppl.out_pq, s->pktout);
s->shgss->lib->release_cred(s->shgss->lib, &s->shgss->ctx);
s->shgss->ctx = NULL;
continue;
} else
#endif /* NO_GSSAPI */
if (s->can_pubkey && !s->done_agent && s->nkeys) {
/*
* Attempt public-key authentication using a key from Pageant.
*/
s->ppl.bpp->pls->actx = SSH2_PKTCTX_PUBLICKEY;
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Trying Pageant key #%d", s->keyi);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* Unpack key from agent response */
s->pk = get_string(s->asrc);
s->comment = get_string(s->asrc);
{
BinarySource src[1];
Add and use BinarySource_*INIT_PL. A great many BinarySource_BARE_INIT calls are passing the two halves of a ptrlen as separate arguments. It saves a lot of call-site faff to have a variant of the init function that just takes the whole ptrlen in one go.
2019-02-06 20:47:18 +00:00
BinarySource_BARE_INIT_PL(src, s->pk);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->alg = get_string(src);
}
/* See if server will accept it */
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "publickey");
/* method */
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
put_bool(s->pktout, false); /* no signature included */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringpl(s->pktout, s->alg);
put_stringpl(s->pktout, s->pk);
pq_push(s->ppl.out_pq, s->pktout);
s->type = AUTH_TYPE_PUBLICKEY_OFFER_QUIET;
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
/* Offer of key refused, presumably via
* USERAUTH_FAILURE. Requeue for the next iteration. */
pq_push_front(s->ppl.in_pq, pktin);
} else {
strbuf *agentreq, *sigdata;
if (flags & FLAG_VERBOSE)
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Authenticating with public key "
"\"%.*s\" from agent\r\n",
PTRLEN_PRINTF(s->comment));
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Server is willing to accept the key.
* Construct a SIGN_REQUEST.
*/
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "publickey");
/* method */
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
put_bool(s->pktout, true); /* signature included */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringpl(s->pktout, s->alg);
put_stringpl(s->pktout, s->pk);
/* Ask agent for signature. */
agentreq = strbuf_new_for_agent_query();
put_byte(agentreq, SSH2_AGENTC_SIGN_REQUEST);
put_stringpl(agentreq, s->pk);
/* Now the data to be signed... */
sigdata = strbuf_new();
ssh2_userauth_add_session_id(s, sigdata);
put_data(sigdata, s->pktout->data + 5,
s->pktout->length - 5);
put_stringsb(agentreq, sigdata);
/* And finally the (zero) flags word. */
put_uint32(agentreq, 0);
ssh2_userauth_agent_query(s, agentreq);
strbuf_free(agentreq);
crWaitUntilV(!s->auth_agent_query);
if (s->agent_response.ptr) {
ptrlen sigblob;
BinarySource src[1];
BinarySource_BARE_INIT(src, s->agent_response.ptr,
s->agent_response.len);
get_uint32(src); /* skip length field */
if (get_byte(src) == SSH2_AGENT_SIGN_RESPONSE &&
(sigblob = get_string(src), !get_err(src))) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Sending Pageant's response");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
ssh2_userauth_add_sigblob(s, s->pktout,
s->pk, sigblob);
pq_push(s->ppl.out_pq, s->pktout);
s->type = AUTH_TYPE_PUBLICKEY;
} else {
Stop aborting the connection if Pageant won't sign. There's been a FIXME comment in there for ages saying we should do something less drastic than ssh_sw_abort(). This actually came up in the course of testing Pageant's support for the new RSA validity check, so I've fixed it: if Pageant won't deliver us a signature from the private key we'd like, then we treat it the same as any other auth method failure: shrug and move on to the next method on our list (or even just the next key in Pageant).
2019-02-10 08:51:36 +00:00
ppl_logevent("Pageant refused signing request");
ppl_printf("Pageant failed to "
"provide a signature\r\n");
s->suppress_wait_for_response_packet = true;
userauth: fix two small memory leaks. Happened to notice these while I was testing the last few commits. (cherry picked from commit 84fa07cfebba2e82738568427d9feb55f782d7cd)
2020-02-02 18:53:15 +00:00
ssh_free_pktout(s->pktout);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
userauth: fill in missing error path when agent goes away. If the agent client code doesn't even manage to read a full response message at all (for example, because the agent it's talking to is Pageant running in debug mode and you just ^Ced it or it crashed, which is what's been happening to me all afternoon), then previously, the userauth code would loop back round to the top of the main loop without having actually sent any request, so the client code would deadlock waiting for a response to nothing. (cherry picked from commit 563cb062b801fd447f5a5b04b9161890d8966e4a)
2020-02-02 18:53:24 +00:00
} else {
ppl_logevent("Pageant failed to respond to "
"signing request");
ppl_printf("Pageant failed to "
"respond to signing request\r\n");
s->suppress_wait_for_response_packet = true;
ssh_free_pktout(s->pktout);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
}
/* Do we have any keys left to try? */
if (s->pkblob_pos_in_agent) {
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->done_agent = true;
s->tried_pubkey_config = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else {
s->keyi++;
if (s->keyi >= s->nkeys)
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->done_agent = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
} else if (s->can_pubkey && s->publickey_blob &&
s->privatekey_available && !s->tried_pubkey_config) {
Remove a lot of pointless 'struct' keywords. This is the commit that f3295e0fb _should_ have been. Yesterday I just added some typedefs so that I didn't have to wear out my fingers typing 'struct' in new code, but what I ought to have done is to move all the typedefs into defs.h with the rest, and then go through cleaning up the legacy 'struct's all through the existing code. But I was mostly trying to concentrate on getting the test suite finished, so I just did the minimum. Now it's time to come back and do it better.
2019-01-04 06:51:44 +00:00
ssh2_userkey *key; /* not live over crReturn */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
char *passphrase; /* not live over crReturn */
s->ppl.bpp->pls->actx = SSH2_PKTCTX_PUBLICKEY;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->tried_pubkey_config = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Try the public key supplied in the configuration.
*
* First, offer the public blob to see if the server is
* willing to accept it.
*/
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "publickey"); /* method */
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
put_bool(s->pktout, false);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* no signature included */
put_stringz(s->pktout, s->publickey_algorithm);
put_string(s->pktout, s->publickey_blob->s,
s->publickey_blob->len);
pq_push(s->ppl.out_pq, s->pktout);
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Offered public key");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
/* Key refused. Give up. */
pq_push_front(s->ppl.in_pq, pktin);
s->type = AUTH_TYPE_PUBLICKEY_OFFER_LOUD;
continue; /* process this new message */
}
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Offer of public key accepted");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Actually attempt a serious authentication using
* the key.
*/
if (flags & FLAG_VERBOSE)
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Authenticating with public key \"%s\"\r\n",
s->publickey_comment);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
key = NULL;
while (!key) {
const char *error; /* not live over crReturn */
if (s->privatekey_encrypted) {
/*
* Get a passphrase from the user.
*/
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->cur_prompt = new_prompts();
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->to_server = false;
Add a 'from_server' flag in prompts_t. This goes with the existing 'to_server' flag (indicating whether the values typed by the user are going to be sent over the wire or remain local), to indicate whether the _text of the prompts_ has come over the wire or is originated locally. Like to_server, nothing yet uses this. It's a hedge against the possibility of maybe having an option for all the auth prompts to work via GUI dialog boxes.
2019-03-09 15:50:23 +00:00
s->cur_prompt->from_server = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->cur_prompt->name = dupstr("SSH key passphrase");
add_prompt(s->cur_prompt,
Remove a load of obsolete printf string limits. In the previous commit I happened to notice a %.150s in a ppl_logevent call, which was probably an important safety precaution a couple of decades ago when that format string was being used for an sprintf into a fixed-size buffer, but now it's just pointless cruft. This commit removes all printf string formatting directives with a compile-time fixed size, with the one exception of a %.3s used to cut out a 3-letter month name in scpserver.c. In cases where the format string in question was already going to an arbitrary-length function like dupprintf or ppl_logevent, that's all I've done; in cases where there was still a fixed-size buffer, I've replaced it with a dynamic buffer and dupprintf.
2018-12-08 21:03:51 +00:00
dupprintf("Passphrase for key \"%s\": ",
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->publickey_comment),
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
false);
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, NULL);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
while (1) {
while (s->userpass_ret < 0 &&
bufchain_size(s->ppl.user_input) > 0)
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt,
s->ppl.user_input);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->userpass_ret >= 0)
break;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
crReturnV;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
if (!s->userpass_ret) {
/* Failed to get a passphrase. Terminate. */
free_prompts(s->cur_prompt);
ssh_bpp_queue_disconnect(
s->ppl.bpp, "Unable to authenticate",
SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER);
ssh_user_close(s->ppl.ssh, "User aborted at "
"passphrase prompt");
return;
}
passphrase =
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
prompt_get_result(s->cur_prompt->prompts[0]);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
free_prompts(s->cur_prompt);
} else {
passphrase = NULL; /* no passphrase needed */
}
/*
* Try decrypting the key.
*/
key = ssh2_load_userkey(s->keyfile, passphrase, &error);
if (passphrase) {
/* burn the evidence */
smemclr(passphrase, strlen(passphrase));
sfree(passphrase);
}
if (key == SSH2_WRONG_PASSPHRASE || key == NULL) {
if (passphrase &&
(key == SSH2_WRONG_PASSPHRASE)) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Wrong passphrase\r\n");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
key = NULL;
/* and loop again */
} else {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Unable to load private key (%s)\r\n",
error);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
key = NULL;
Give a sensible error when using a too-short RSA key. The ssh_signkey vtable has grown a new method ssh_key_invalid(), which checks whether the key is going to be usable for constructing a signature at all. Currently the only way this can fail is if it's an RSA key so short that there isn't room to put all the PKCS#1 formatting in the signature preimage integer, but the return value is an arbitrary error message just in case more reasons are needed later. This is tested separately rather than at key-creation time because of the signature flags system: an RSA key of intermediate length could be valid for SHA-1 signing but not for SHA-512. So really this method should be called at the point where you've decided what sig flags you want to use, and you're checking if _those flags_ are OK. On the verification side, there's no need for a separate check. If someone presents us with an RSA key so short that it's impossible to encode a valid signature using it, then we simply regard all signatures as invalid.
2019-02-10 08:44:59 +00:00
s->suppress_wait_for_response_packet = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
break; /* try something else */
}
Fix crash on entering wrong passphrase. When I added the new call to ssh_key_invalid the other day, I forgot to avoid calling it if the key is NULL (and therefore even more obviously invalid).
2019-02-11 20:20:50 +00:00
} else {
/* FIXME: if we ever support variable signature
* flags, this is somewhere they'll need to be
* put */
char *invalid = ssh_key_invalid(key->key, 0);
if (invalid) {
ppl_printf("Cannot use this private key (%s)\r\n",
invalid);
ssh_key_free(key->key);
sfree(key->comment);
sfree(key);
sfree(invalid);
key = NULL;
s->suppress_wait_for_response_packet = true;
break; /* try something else */
}
Give a sensible error when using a too-short RSA key. The ssh_signkey vtable has grown a new method ssh_key_invalid(), which checks whether the key is going to be usable for constructing a signature at all. Currently the only way this can fail is if it's an RSA key so short that there isn't room to put all the PKCS#1 formatting in the signature preimage integer, but the return value is an arbitrary error message just in case more reasons are needed later. This is tested separately rather than at key-creation time because of the signature flags system: an RSA key of intermediate length could be valid for SHA-1 signing but not for SHA-512. So really this method should be called at the point where you've decided what sig flags you want to use, and you're checking if _those flags_ are OK. On the verification side, there's no need for a separate check. If someone presents us with an RSA key so short that it's impossible to encode a valid signature using it, then we simply regard all signatures as invalid.
2019-02-10 08:44:59 +00:00
}
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
if (key) {
strbuf *pkblob, *sigdata, *sigblob;
/*
* We have loaded the private key and the server
* has announced that it's willing to accept it.
* Hallelujah. Generate a signature and send it.
*/
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "publickey"); /* method */
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
put_bool(s->pktout, true); /* signature follows */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, ssh_key_ssh_id(key->key));
pkblob = strbuf_new();
ssh_key_public_blob(key->key, BinarySink_UPCAST(pkblob));
put_string(s->pktout, pkblob->s, pkblob->len);
/*
* The data to be signed is:
*
* string session-id
*
* followed by everything so far placed in the
* outgoing packet.
*/
sigdata = strbuf_new();
ssh2_userauth_add_session_id(s, sigdata);
put_data(sigdata, s->pktout->data + 5,
s->pktout->length - 5);
sigblob = strbuf_new();
Replace more (pointer, length) arg pairs with ptrlen. The abstract method ssh_key_sign(), and the concrete functions ssh_rsakex_newkey() and rsa_ssh1_public_blob_len(), now each take a ptrlen argument in place of a separate pointer and length pair. Partly that's because I'm generally preferring ptrlens these days and it keeps argument lists short and tidy-looking, but mostly it's because it will make those functions easier to wrap in my upcoming test system.
2019-01-01 21:07:48 +00:00
ssh_key_sign(key->key, ptrlen_from_strbuf(sigdata), 0,
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
BinarySink_UPCAST(sigblob));
strbuf_free(sigdata);
ssh2_userauth_add_sigblob(
New utility functions to make ptrlens. One to make one from a NUL-terminated string, and another to make one from a strbuf. I've switched over all the obvious cases where I should have been using these functions.
2018-10-13 15:30:59 +00:00
s, s->pktout, ptrlen_from_strbuf(pkblob),
ptrlen_from_strbuf(sigblob));
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
strbuf_free(pkblob);
strbuf_free(sigblob);
pq_push(s->ppl.out_pq, s->pktout);
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Sent public key signature");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->type = AUTH_TYPE_PUBLICKEY;
ssh_key_free(key->key);
sfree(key->comment);
sfree(key);
}
#ifndef NO_GSSAPI
} else if (s->can_gssapi && !s->tried_gssapi) {
/* gssapi-with-mic authentication */
ptrlen data;
s->type = AUTH_TYPE_GSSAPI;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->tried_gssapi = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->ppl.bpp->pls->actx = SSH2_PKTCTX_GSSAPI;
if (s->shgss->lib->gsslogmsg)
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("%s", s->shgss->lib->gsslogmsg);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* Sending USERAUTH_REQUEST with "gssapi-with-mic" method */
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Trying gssapi-with-mic...");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "gssapi-with-mic");
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Attempting GSSAPI authentication");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* add mechanism info */
s->shgss->lib->indicate_mech(s->shgss->lib, &s->gss_buf);
/* number of GSSAPI mechanisms */
put_uint32(s->pktout, 1);
/* length of OID + 2 */
put_uint32(s->pktout, s->gss_buf.length + 2);
put_byte(s->pktout, SSH2_GSS_OIDTYPE);
/* length of OID */
put_byte(s->pktout, s->gss_buf.length);
put_data(s->pktout, s->gss_buf.value, s->gss_buf.length);
pq_push(s->ppl.out_pq, s->pktout);
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
if (pktin->type != SSH2_MSG_USERAUTH_GSSAPI_RESPONSE) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication request refused");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
pq_push_front(s->ppl.in_pq, pktin);
continue;
}
/* check returned packet ... */
data = get_string(pktin);
s->gss_rcvtok.value = (char *)data.ptr;
s->gss_rcvtok.length = data.len;
if (s->gss_rcvtok.length != s->gss_buf.length + 2 ||
((char *)s->gss_rcvtok.value)[0] != SSH2_GSS_OIDTYPE ||
((char *)s->gss_rcvtok.value)[1] != s->gss_buf.length ||
memcmp((char *)s->gss_rcvtok.value + 2,
s->gss_buf.value,s->gss_buf.length) ) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication - wrong response "
"from server");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
continue;
}
/* Import server name if not cached from KEX */
if (s->shgss->srv_name == GSS_C_NO_NAME) {
s->gss_stat = s->shgss->lib->import_name(
s->shgss->lib, s->fullhostname, &s->shgss->srv_name);
if (s->gss_stat != SSH_GSS_OK) {
if (s->gss_stat == SSH_GSS_BAD_HOST_NAME)
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI import name failed -"
" Bad service name");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
else
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI import name failed");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
continue;
}
}
/* Allocate our gss_ctx */
s->gss_stat = s->shgss->lib->acquire_cred(
s->shgss->lib, &s->shgss->ctx, NULL);
if (s->gss_stat != SSH_GSS_OK) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication failed to get "
"credentials");
Avoid hanging on GSSAPI acquire_cred failure. If GSSAPI authentication fails because we call the GSS acquire_cred function on the client side and find it doesn't give us anything useful, then that authentication attempt has to terminate - but since _we_ decided to terminate it, on the client side, the server will be sending us neither a formal USERAUTH_FAILURE nor any other kind of packet. So when we go back round to the top of the auth loop, we have to avoid _either_ assuming we're sitting on a USERAUTH_FAILURE we can parse for its method list, _or_ waiting to receive one. Instead we just have to push on and try the next auth method in the list from the last USERAUTH_FAILURE we did see. Hence, a new flag lets us suppress the usual behaviour of waiting until we have a response packet on the queue, and then all references to pktin after that are tested for NULL.
2018-12-06 18:08:56 +00:00
/* The failure was on our side, so the server
* won't be sending a response packet indicating
* failure. Avoid waiting for it next time round
* the loop. */
s->suppress_wait_for_response_packet = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
continue;
}
/* initial tokens are empty */
SSH_GSS_CLEAR_BUF(&s->gss_rcvtok);
SSH_GSS_CLEAR_BUF(&s->gss_sndtok);
/* now enter the loop */
do {
/*
* When acquire_cred yields no useful expiration, go with
* the service ticket expiration.
*/
s->gss_stat = s->shgss->lib->init_sec_context
(s->shgss->lib,
&s->shgss->ctx,
s->shgss->srv_name,
s->gssapi_fwd,
&s->gss_rcvtok,
&s->gss_sndtok,
NULL,
NULL);
if (s->gss_stat!=SSH_GSS_S_COMPLETE &&
s->gss_stat!=SSH_GSS_S_CONTINUE_NEEDED) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication initialisation "
"failed");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->shgss->lib->display_status(s->shgss->lib,
s->shgss->ctx, &s->gss_buf) == SSH_GSS_OK) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("%s", (char *)s->gss_buf.value);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
sfree(s->gss_buf.value);
}
pq_push_front(s->ppl.in_pq, pktin);
break;
}
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication initialised");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Client and server now exchange tokens until GSSAPI
* no longer says CONTINUE_NEEDED
*/
if (s->gss_sndtok.length != 0) {
s->pktout =
ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_GSSAPI_TOKEN);
put_string(s->pktout,
s->gss_sndtok.value, s->gss_sndtok.length);
pq_push(s->ppl.out_pq, s->pktout);
s->shgss->lib->free_tok(s->shgss->lib, &s->gss_sndtok);
}
if (s->gss_stat == SSH_GSS_S_CONTINUE_NEEDED) {
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
Handle SSH_MSG_USERAUTH_GSSAPI_ERRTOK gracefully. Jacob ran across a server which terminated a GSS userauth attempt by sending that message before USERAUTH_FAILURE. The result was that PuTTY interpreted the ERRTOK as indicating a failure of authentication (so far, fair enough), and then handled it exactly as it would have handled USERAUTH_FAILURE itself: it pushed it back on in_pq and went back round the main userauth loop. But the thing that loop is expecting to find at the head of in_pq is an _actual_ USERAUTH_FAILURE, not some arbitrary thing that preceded it. So this led to some confusion, especially when the real USERAUTH_FAILURE that immediately followed the ERRTOK got interpreted as the response to the _next_ auth attempt. One of the root causes is that we had no handler for ERRTOK at all. We now do. (Though it's trivial - we ignore the content of the message and just wait for the followup USERAUTH_FAILURE that the GSSAPI RFC says MUST come next. Possibly there's something nicer we could do involving handing the error token to the GSSAPI library and letting it print a final user-facing message? But that's beyond my GSS expertise.) But this also exposed another problem: we shouldn't be pushing _any_ packet back on in_pq unless it's actually a USERAUTH_FAILURE. Any other unexpected packet should have _different_ confused handling. So now that call to pq_push_front is conditionalised on the packet type, and only triggers for USERAUTH_FAILURE proper.
2018-11-15 18:12:19 +00:00
if (pktin->type == SSH2_MSG_USERAUTH_GSSAPI_ERRTOK) {
/*
* Per RFC 4462 section 3.9, this packet
* type MUST immediately precede an
* ordinary USERAUTH_FAILURE.
*
* We currently don't know how to do
* anything with the GSSAPI error token
* contained in this packet, so we ignore
* it and just wait for the following
* FAILURE.
*/
crMaybeWaitUntilV(
(pktin = ssh2_userauth_pop(s)) != NULL);
if (pktin->type != SSH2_MSG_USERAUTH_FAILURE) {
ssh_proto_error(
s->ppl.ssh, "Received unexpected packet "
"after SSH_MSG_USERAUTH_GSSAPI_ERRTOK "
"(expected SSH_MSG_USERAUTH_FAILURE): "
"type %d (%s)", pktin->type,
ssh2_pkt_type(s->ppl.bpp->pls->kctx,
s->ppl.bpp->pls->actx,
pktin->type));
return;
}
}
if (pktin->type == SSH2_MSG_USERAUTH_FAILURE) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication failed");
Handle SSH_MSG_USERAUTH_GSSAPI_ERRTOK gracefully. Jacob ran across a server which terminated a GSS userauth attempt by sending that message before USERAUTH_FAILURE. The result was that PuTTY interpreted the ERRTOK as indicating a failure of authentication (so far, fair enough), and then handled it exactly as it would have handled USERAUTH_FAILURE itself: it pushed it back on in_pq and went back round the main userauth loop. But the thing that loop is expecting to find at the head of in_pq is an _actual_ USERAUTH_FAILURE, not some arbitrary thing that preceded it. So this led to some confusion, especially when the real USERAUTH_FAILURE that immediately followed the ERRTOK got interpreted as the response to the _next_ auth attempt. One of the root causes is that we had no handler for ERRTOK at all. We now do. (Though it's trivial - we ignore the content of the message and just wait for the followup USERAUTH_FAILURE that the GSSAPI RFC says MUST come next. Possibly there's something nicer we could do involving handing the error token to the GSSAPI library and letting it print a final user-facing message? But that's beyond my GSS expertise.) But this also exposed another problem: we shouldn't be pushing _any_ packet back on in_pq unless it's actually a USERAUTH_FAILURE. Any other unexpected packet should have _different_ confused handling. So now that call to pq_push_front is conditionalised on the packet type, and only triggers for USERAUTH_FAILURE proper.
2018-11-15 18:12:19 +00:00
s->gss_stat = SSH_GSS_FAILURE;
pq_push_front(s->ppl.in_pq, pktin);
break;
} else if (pktin->type !=
SSH2_MSG_USERAUTH_GSSAPI_TOKEN) {
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication -"
" bad server response");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->gss_stat = SSH_GSS_FAILURE;
break;
}
data = get_string(pktin);
s->gss_rcvtok.value = (char *)data.ptr;
s->gss_rcvtok.length = data.len;
}
} while (s-> gss_stat == SSH_GSS_S_CONTINUE_NEEDED);
if (s->gss_stat != SSH_GSS_OK) {
s->shgss->lib->release_cred(s->shgss->lib, &s->shgss->ctx);
continue;
}
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("GSSAPI authentication loop finished OK");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* Now send the MIC */
s->pktout = ssh2_userauth_gss_packet(s, "gssapi-with-mic");
pq_push(s->ppl.out_pq, s->pktout);
s->shgss->lib->release_cred(s->shgss->lib, &s->shgss->ctx);
continue;
#endif
} else if (s->can_keyb_inter && !s->kbd_inter_refused) {
/*
* Keyboard-interactive authentication.
*/
s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
s->ppl.bpp->pls->actx = SSH2_PKTCTX_KBDINTER;
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "keyboard-interactive");
/* method */
put_stringz(s->pktout, ""); /* lang */
put_stringz(s->pktout, ""); /* submethods */
pq_push(s->ppl.out_pq, s->pktout);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Attempting keyboard-interactive authentication");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
if (!s->ki_scc_initialised) {
s->ki_scc = seat_stripctrl_new(
s->ppl.seat, NULL, SIC_KI_PROMPTS);
if (s->ki_scc)
stripctrl_enable_line_limiting(s->ki_scc);
s->ki_scc_initialised = true;
}
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
if (pktin->type != SSH2_MSG_USERAUTH_INFO_REQUEST) {
/* Server is not willing to do keyboard-interactive
* at all (or, bizarrely but legally, accepts the
* user without actually issuing any prompts).
* Give up on it entirely. */
pq_push_front(s->ppl.in_pq, pktin);
s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->kbd_inter_refused = true; /* don't try it again */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
continue;
}
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
s->ki_printed_header = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Loop while the server continues to send INFO_REQUESTs.
*/
while (pktin->type == SSH2_MSG_USERAUTH_INFO_REQUEST) {
ptrlen name, inst;
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
strbuf *sb;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* We've got a fresh USERAUTH_INFO_REQUEST.
* Get the preamble and start building a prompt.
*/
name = get_string(pktin);
inst = get_string(pktin);
get_string(pktin); /* skip language tag */
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->cur_prompt = new_prompts();
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->to_server = true;
Add a 'from_server' flag in prompts_t. This goes with the existing 'to_server' flag (indicating whether the values typed by the user are going to be sent over the wire or remain local), to indicate whether the _text of the prompts_ has come over the wire or is originated locally. Like to_server, nothing yet uses this. It's a hedge against the possibility of maybe having an option for all the auth prompts to work via GUI dialog boxes.
2019-03-09 15:50:23 +00:00
s->cur_prompt->from_server = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Get any prompt(s) from the packet.
*/
s->num_prompts = get_uint32(pktin);
keyboard-interactive auth: use a uint32 for num_prompts. While testing the previous fix, I also noticed that s->num_prompts is an ordinary signed int. So if the server sends a _really_ large value, it'll be treated as negative. That's kind of harmless: our loop wouldn't read any prompts at all from the packet, and then it would send back the same nonsense count with no responses. But it's inelegant: now, if the server violates the protocol in this way, we respond by sending an even wronger packet in return. Changed the type of num_prompts and the loop variable to uint32_t, so now we'll respond by actually trying to read that many prompts, which will fail by reaching the new error check. I think that's a more sensible way to handle this one.
2019-05-05 09:10:54 +00:00
for (uint32_t i = 0; i < s->num_prompts; i++) {
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
ptrlen prompt = get_string(pktin);
bool echo = get_bool(pktin);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
Fix server-triggered DoS in keyboard-interactive auth. If a server sends a very large number as the num-prompts field, we'd loop round calling get_string and get_bool, which would run off the end of the buffer but still carefully return legal default values (the empty string and false), so we'd carry on piling pointless stuff into s->cur_prompt and using up lots of memory. Coverity pointed this out by warning that an untrusted server-provided value was being used as a loop bound. I'm not convinced that's an error in every case, but I must admit it pointed out a useful thing here! The fix is to check the error indicator on the BinarySource after reading each prompt from the input packet. Then we'll only keep allocating memory as long as there's actually data in the packet.
2019-05-04 14:58:21 +00:00
if (get_err(pktin)) {
ssh_proto_error(
s->ppl.ssh, "Server sent truncated "
"SSH_MSG_USERAUTH_INFO_REQUEST packet");
return;
}
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
sb = strbuf_new();
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (!prompt.len) {
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
put_datapl(sb, PTRLEN_LITERAL(
"<server failed to send prompt>: "));
} else if (s->ki_scc) {
stripctrl_retarget(
s->ki_scc, BinarySink_UPCAST(sb));
put_datapl(s->ki_scc, prompt);
stripctrl_retarget(s->ki_scc, NULL);
} else {
put_datapl(sb, prompt);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
add_prompt(s->cur_prompt, strbuf_to_str(sb), echo);
}
/*
* Make the header strings. This includes the
* 'name' (optional dialog-box title) and
* 'instruction' from the server.
*
* First, display our disambiguating header line
* if this is the first time round the loop -
* _unless_ the server has sent a completely empty
* k-i packet with no prompts _or_ text, which
* apparently some do. In that situation there's
* no need to alert the user that the following
* text is server- supplied, because, well, _what_
* text?
*
* We also only do this if we got a stripctrl,
* because if we didn't, that suggests this is all
* being done via dialog boxes anyway.
*/
if (!s->ki_printed_header && s->ki_scc &&
(s->num_prompts || name.len || inst.len)) {
ssh2_userauth_antispoof_msg(
s, "Keyboard-interactive authentication "
"prompts from server:");
s->ki_printed_header = true;
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
seat_set_trust_status(s->ppl.seat, false);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
sb = strbuf_new();
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (name.len) {
ssh2userauth: be more careful about s->ki_scc being NULL. Coverity points out that we're inconsistent about checking it for NULL: seat_stripctrl_new() *can* return NULL, so in principle, we can go through the initialisation code for s->ki_scc and have it still be NULL afterwards. I check that in the code that uses it to sanitise the prompt strings out of USERAUTH_INFO_REQUEST, but not in the code that sanitises the name or instruction strings. Now all uses are checked in the same way. This is only a latent bug, because the four main Seat implementations (GUI and console, on Windows and Unix) never return NULL. The only implementation of seat_stripctrl_new which _can_ return NULL is the trivial nullseat_stripctrl_new, currently only used by Uppity. However, of course, if that changes in future, this latent bug could turn into a real one, so better to fix it before that happens. Thanks Coverity.
2019-07-23 17:51:59 +00:00
if (s->ki_scc) {
stripctrl_retarget(s->ki_scc,
BinarySink_UPCAST(sb));
put_datapl(s->ki_scc, name);
stripctrl_retarget(s->ki_scc, NULL);
} else {
put_datapl(sb, name);
}
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->name_reqd = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else {
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
put_datapl(sb, PTRLEN_LITERAL(
"SSH server authentication"));
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->name_reqd = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
s->cur_prompt->name = strbuf_to_str(sb);
sb = strbuf_new();
if (inst.len) {
ssh2userauth: be more careful about s->ki_scc being NULL. Coverity points out that we're inconsistent about checking it for NULL: seat_stripctrl_new() *can* return NULL, so in principle, we can go through the initialisation code for s->ki_scc and have it still be NULL afterwards. I check that in the code that uses it to sanitise the prompt strings out of USERAUTH_INFO_REQUEST, but not in the code that sanitises the name or instruction strings. Now all uses are checked in the same way. This is only a latent bug, because the four main Seat implementations (GUI and console, on Windows and Unix) never return NULL. The only implementation of seat_stripctrl_new which _can_ return NULL is the trivial nullseat_stripctrl_new, currently only used by Uppity. However, of course, if that changes in future, this latent bug could turn into a real one, so better to fix it before that happens. Thanks Coverity.
2019-07-23 17:51:59 +00:00
if (s->ki_scc) {
stripctrl_retarget(s->ki_scc,
BinarySink_UPCAST(sb));
put_datapl(s->ki_scc, inst);
stripctrl_retarget(s->ki_scc, NULL);
} else {
put_datapl(sb, inst);
}
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->instr_reqd = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else {
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->instr_reqd = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
Print 'instruction' field in keyboard-interactive auth. When I reworked this code to make it strbuf-based, I apparently forgot to copy the contents of one particular strbuf into the prompts_t.
2019-05-10 09:26:05 +00:00
if (sb->len)
s->cur_prompt->instruction = strbuf_to_str(sb);
userauth: fix two small memory leaks. Happened to notice these while I was testing the last few commits. (cherry picked from commit 84fa07cfebba2e82738568427d9feb55f782d7cd)
2020-02-02 18:53:15 +00:00
else
strbuf_free(sb);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
* Our prompts_t is fully constructed now. Get the
* user's response(s).
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
*/
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, NULL);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
while (1) {
while (s->userpass_ret < 0 &&
bufchain_size(s->ppl.user_input) > 0)
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, s->ppl.user_input);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->userpass_ret >= 0)
break;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
crReturnV;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
if (!s->userpass_ret) {
/*
* Failed to get responses. Terminate.
*/
free_prompts(s->cur_prompt);
ssh_bpp_queue_disconnect(
s->ppl.bpp, "Unable to authenticate",
SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER);
ssh_user_close(s->ppl.ssh, "User aborted during "
"keyboard-interactive authentication");
return;
}
/*
* Send the response(s) to the server.
*/
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_INFO_RESPONSE);
put_uint32(s->pktout, s->num_prompts);
keyboard-interactive auth: use a uint32 for num_prompts. While testing the previous fix, I also noticed that s->num_prompts is an ordinary signed int. So if the server sends a _really_ large value, it'll be treated as negative. That's kind of harmless: our loop wouldn't read any prompts at all from the packet, and then it would send back the same nonsense count with no responses. But it's inelegant: now, if the server violates the protocol in this way, we respond by sending an even wronger packet in return. Changed the type of num_prompts and the loop variable to uint32_t, so now we'll respond by actually trying to read that many prompts, which will fail by reaching the new error check. I think that's a more sensible way to handle this one.
2019-05-05 09:10:54 +00:00
for (uint32_t i = 0; i < s->num_prompts; i++) {
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
put_stringz(s->pktout, prompt_get_result_ref(
s->cur_prompt->prompts[i]));
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
s->pktout->minlen = 256;
pq_push(s->ppl.out_pq, s->pktout);
/*
* Free the prompts structure from this iteration.
* If there's another, a new one will be allocated
* when we return to the top of this while loop.
*/
free_prompts(s->cur_prompt);
/*
* Get the next packet in case it's another
* INFO_REQUEST.
*/
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
}
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
/*
* Print our trailer line, if we printed a header.
*/
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
if (s->ki_printed_header) {
seat_set_trust_status(s->ppl.seat, true);
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
ssh2_userauth_antispoof_msg(
s, "End of keyboard-interactive prompts from server");
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
}
Move sanitisation of k-i prompts into the SSH code. Now, instead of each seat's prompt-handling function doing the control-char sanitisation of prompt text, the SSH code does it. This means we can do it differently depending on the prompt. In particular, prompts _we_ generate (e.g. a genuine request for your private key's passphrase) are not sanitised; but prompts coming from the server (in keyboard-interactive mode, or its more restricted SSH-1 analogues, TIS and CryptoCard) are not only sanitised but also line-length limited and surrounded by uncounterfeitable headers, like I've just done to the authentication banners. This should mean that if a malicious server tries to fake the local passphrase prompt (perhaps because it's somehow already got a copy of your _encrypted_ private key), you can tell the difference.
2019-03-09 15:51:38 +00:00
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* We should have SUCCESS or FAILURE now.
*/
pq_push_front(s->ppl.in_pq, pktin);
} else if (s->can_passwd) {
/*
* Plain old password authentication.
*/
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool changereq_first_time; /* not live over crReturn */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->ppl.bpp->pls->actx = SSH2_PKTCTX_PASSWORD;
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->cur_prompt = new_prompts();
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->to_server = true;
Add a 'from_server' flag in prompts_t. This goes with the existing 'to_server' flag (indicating whether the values typed by the user are going to be sent over the wire or remain local), to indicate whether the _text of the prompts_ has come over the wire or is originated locally. Like to_server, nothing yet uses this. It's a hedge against the possibility of maybe having an option for all the auth prompts to work via GUI dialog boxes.
2019-03-09 15:50:23 +00:00
s->cur_prompt->from_server = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->cur_prompt->name = dupstr("SSH password");
add_prompt(s->cur_prompt, dupprintf("%s@%s's password: ",
s->username, s->hostname),
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
false);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, NULL);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
while (1) {
while (s->userpass_ret < 0 &&
bufchain_size(s->ppl.user_input) > 0)
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, s->ppl.user_input);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->userpass_ret >= 0)
break;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
crReturnV;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
if (!s->userpass_ret) {
/*
* Failed to get responses. Terminate.
*/
free_prompts(s->cur_prompt);
ssh_bpp_queue_disconnect(
s->ppl.bpp, "Unable to authenticate",
SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER);
ssh_user_close(s->ppl.ssh, "User aborted during password "
"authentication");
return;
}
/*
* Squirrel away the password. (We may need it later if
* asked to change it.)
*/
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
s->password = prompt_get_result(s->cur_prompt->prompts[0]);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
free_prompts(s->cur_prompt);
/*
* Send the password packet.
*
* We pad out the password packet to 256 bytes to make
* it harder for an attacker to find the length of the
* user's password.
*
* Anyone using a password longer than 256 bytes
* probably doesn't have much to worry about from
* people who find out how long their password is!
*/
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "password");
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
put_bool(s->pktout, false);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, s->password);
s->pktout->minlen = 256;
pq_push(s->ppl.out_pq, s->pktout);
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Sent password");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->type = AUTH_TYPE_PASSWORD;
/*
* Wait for next packet, in case it's a password change
* request.
*/
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
changereq_first_time = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
while (pktin->type == SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
/*
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
* We're being asked for a new password
* (perhaps not for the first time).
* Loop until the server accepts it.
*/
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
bool got_new = false; /* not live over crReturn */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
ptrlen prompt; /* not live over crReturn */
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
{
const char *msg;
if (changereq_first_time)
msg = "Server requested password change";
else
msg = "Server rejected new password";
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("%s", msg);
ppl_printf("%s\r\n", msg);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
prompt = get_string(pktin);
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->cur_prompt = new_prompts();
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->to_server = true;
Add a 'from_server' flag in prompts_t. This goes with the existing 'to_server' flag (indicating whether the values typed by the user are going to be sent over the wire or remain local), to indicate whether the _text of the prompts_ has come over the wire or is originated locally. Like to_server, nothing yet uses this. It's a hedge against the possibility of maybe having an option for all the auth prompts to work via GUI dialog boxes.
2019-03-09 15:50:23 +00:00
s->cur_prompt->from_server = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
s->cur_prompt->name = dupstr("New SSH password");
s->cur_prompt->instruction = mkstr(prompt);
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->cur_prompt->instr_reqd = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* There's no explicit requirement in the protocol
* for the "old" passwords in the original and
* password-change messages to be the same, and
* apparently some Cisco kit supports password change
* by the user entering a blank password originally
* and the real password subsequently, so,
* reluctantly, we prompt for the old password again.
*
* (On the other hand, some servers don't even bother
* to check this field.)
*/
add_prompt(s->cur_prompt,
dupstr("Current password (blank for previously entered password): "),
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
false);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
add_prompt(s->cur_prompt, dupstr("Enter new password: "),
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
false);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
add_prompt(s->cur_prompt, dupstr("Confirm new password: "),
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
false);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Loop until the user manages to enter the same
* password twice.
*/
while (!got_new) {
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt, NULL);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
while (1) {
while (s->userpass_ret < 0 &&
bufchain_size(s->ppl.user_input) > 0)
New abstraction 'Seat', to pass to backends. This is a new vtable-based abstraction which is passed to a backend in place of Frontend, and it implements only the subset of the Frontend functions needed by a backend. (Many other Frontend functions still exist, notably the wide range of things called by terminal.c providing platform-independent operations on the GUI terminal window.) The purpose of making it a vtable is that this opens up the possibility of creating a backend as an internal implementation detail of some other activity, by providing just that one backend with a custom Seat that implements the methods differently. For example, this refactoring should make it feasible to directly implement an SSH proxy type, aka the 'jump host' feature supported by OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP mode, and then expose the main channel of that as the Socket for the primary connection'. (Which of course you can already do by spawning 'plink -nc' as a separate proxy process, but this would permit it in the _same_ process without anything getting confused.) I've centralised a full set of stub methods in misc.c for the new abstraction, which allows me to get rid of several annoying stubs in the previous code. Also, while I'm here, I've moved a lot of duplicated modalfatalbox() type functions from application main program files into wincons.c / uxcons.c, which I think saves duplication overall. (A minor visible effect is that the prefixes on those console-based fatal error messages will now be more consistent between applications.)
2018-10-11 18:58:42 +00:00
s->userpass_ret = seat_get_userpass_input(
s->ppl.seat, s->cur_prompt,
s->ppl.user_input);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->userpass_ret >= 0)
break;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = true;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
crReturnV;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
s->want_user_input = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
if (!s->userpass_ret) {
/*
* Failed to get responses. Terminate.
*/
/* burn the evidence */
free_prompts(s->cur_prompt);
smemclr(s->password, strlen(s->password));
sfree(s->password);
ssh_bpp_queue_disconnect(
s->ppl.bpp, "Unable to authenticate",
SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER);
ssh_user_close(s->ppl.ssh, "User aborted during "
"password changing");
return;
}
/*
* If the user specified a new original password
* (IYSWIM), overwrite any previously specified
* one.
* (A side effect is that the user doesn't have to
* re-enter it if they louse up the new password.)
*/
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
if (s->cur_prompt->prompts[0]->result->s[0]) {
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
smemclr(s->password, strlen(s->password));
/* burn the evidence */
sfree(s->password);
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
s->password = prompt_get_result(
s->cur_prompt->prompts[0]);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
/*
* Check the two new passwords match.
*/
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
got_new = !strcmp(
prompt_get_result_ref(s->cur_prompt->prompts[1]),
prompt_get_result_ref(s->cur_prompt->prompts[2]));
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (!got_new)
/* They don't. Silly user. */
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_printf("Passwords do not match\r\n");
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
/*
* Send the new password (along with the old one).
* (see above for padding rationale)
*/
s->pktout = ssh_bpp_new_pktout(
s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(s->pktout, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(s->pktout, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, "password");
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
put_bool(s->pktout, true);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(s->pktout, s->password);
Use strbuf to store results in prompts_t. UBsan pointed out another memcpy from NULL (again with length 0) in the prompts_t system. When I looked at it, I realised that firstly prompt_ensure_result_size was an early not-so-good implementation of sgrowarray_nm that would benefit from being replaced with a call to the real one, and secondly, the whole system for storing prompt results should really have been replaced with strbufs with the no-move option, because that's doing all the same jobs better. So, now each prompt_t holds a strbuf in place of its previous manually managed string. prompt_ensure_result_size is gone (the console prompt-reading functions use strbuf_append, and everything else just adds to the strbuf in the usual marshal.c way). New functions exist to retrieve a prompt_t's result, either by reference or copied. (cherry picked from commit cd6bc14f04382127a6617e10a82beb0232675d70)
2020-01-21 20:19:47 +00:00
put_stringz(s->pktout, prompt_get_result_ref(
s->cur_prompt->prompts[1]));
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
free_prompts(s->cur_prompt);
s->pktout->minlen = 256;
pq_push(s->ppl.out_pq, s->pktout);
Start using C99 variadic macros. In the past, I've had a lot of macros which you call with double parentheses, along the lines of debug(("format string", params)), so that the inner parens protect the commas and permit the macro to treat the whole printf-style argument list as one macro argument. That's all very well, but it's a bit inconvenient (it doesn't leave you any way to implement such a macro by prepending another argument to the list), and now this code base's rules allow C99isms, I can switch all those macros to using a single pair of parens, using the C99 ability to say '...' in the parameter list of the #define and get at the corresponding suffix of the arguments as __VA_ARGS__. So I'm doing it. I've made the following printf-style macros variadic: bpp_logevent, ppl_logevent, ppl_printf and debug. While I'm here, I've also fixed up a collection of conditioned-out calls to debug() in the Windows front end which were clearly expecting a macro with a different calling syntax, because they had an integer parameter first. If I ever have a need to condition those back in, they should actually work now.
2018-12-08 20:32:31 +00:00
ppl_logevent("Sent new password");
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/*
* Now see what the server has to say about it.
* (If it's CHANGEREQ again, it's not happy with the
* new password.)
*/
crMaybeWaitUntilV((pktin = ssh2_userauth_pop(s)) != NULL);
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
changereq_first_time = false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
/*
* We need to reexamine the current pktin at the top
* of the loop. Either:
* - we weren't asked to change password at all, in
* which case it's a SUCCESS or FAILURE with the
* usual meaning
* - we sent a new password, and the server was
* either OK with it (SUCCESS or FAILURE w/partial
* success) or unhappy with the _old_ password
* (FAILURE w/o partial success)
* In any of these cases, we go back to the top of
* the loop and start again.
*/
pq_push_front(s->ppl.in_pq, pktin);
/*
* We don't need the old password any more, in any
* case. Burn the evidence.
*/
smemclr(s->password, strlen(s->password));
sfree(s->password);
} else {
ssh_bpp_queue_disconnect(
s->ppl.bpp,
"No supported authentication methods available",
SSH2_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE);
ssh_sw_abort(s->ppl.ssh, "No supported authentication methods "
Retain permitted methods list in userauth layer state. There are situations - or _should_ be, at any rate - in which we terminate a userauth attempt without having received a USERAUTH_FAILURE from the server, which means that we can't depend on always starting a userauth loop iteration by extracting the server's list of permitted methods from the current failure message. If there isn't a current failure message, the best we can do is remember the state from last time. That's already what we do for actually deciding which methods to attempt (we set s->can_foo from the methods string). But we should also keep the full original version of the string, for use in error message.
2018-12-06 18:06:15 +00:00
"available (server sent: %s)",
s->last_methods_string->s);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
return;
}
}
try_new_username:;
}
userauth_success:
/*
* We've just received USERAUTH_SUCCESS, and we haven't sent
* any packets since. Signal the transport layer to consider
* doing an immediate rekey, if it has any reason to want to.
*/
ssh2_transport_notify_auth_done(s->transport_layer);
/*
* Finally, hand over to our successor layer, and return
* immediately without reaching the crFinishV: ssh_ppl_replace
* will have freed us, so crFinishV's zeroing-out of crState would
* be a use-after-free bug.
*/
{
PacketProtocolLayer *successor = s->successor_layer;
s->successor_layer = NULL; /* avoid freeing it ourself */
ssh_ppl_replace(&s->ppl, successor);
return; /* we've just freed s, so avoid even touching s->crState */
}
crFinishV;
}
static void ssh2_userauth_add_session_id(
struct ssh2_userauth_state *s, strbuf *sigdata)
{
if (s->ppl.remote_bugs & BUG_SSH2_PK_SESSIONID) {
New marshalling function put_datapl(). Just like put_data(), but takes a ptrlen rather than separate ptr and len arguments, so it saves a bit of repetition at call sites. I probably should have written this ages ago, but better late than never; I've also converted every call site I can find that needed it.
2019-01-01 19:00:19 +00:00
put_datapl(sigdata, s->session_id);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
} else {
put_stringpl(sigdata, s->session_id);
}
}
static void ssh2_userauth_agent_query(
struct ssh2_userauth_state *s, strbuf *req)
{
void *response;
int response_len;
sfree(s->agent_response_to_free);
s->agent_response_to_free = NULL;
s->auth_agent_query = agent_query(req, &response, &response_len,
ssh2_userauth_agent_callback, s);
if (!s->auth_agent_query)
ssh2_userauth_agent_callback(s, response, response_len);
}
static void ssh2_userauth_agent_callback(void *uav, void *reply, int replylen)
{
struct ssh2_userauth_state *s = (struct ssh2_userauth_state *)uav;
s->auth_agent_query = NULL;
s->agent_response_to_free = reply;
s->agent_response = make_ptrlen(reply, replylen);
queue_idempotent_callback(&s->ppl.ic_process_queue);
}
/*
* Helper function to add an SSH-2 signature blob to a packet. Expects
* to be shown the public key blob as well as the signature blob.
* Normally just appends the sig blob unmodified as a string, except
* that it optionally breaks it open and fiddle with it to work around
* BUG_SSH2_RSA_PADDING.
*/
static void ssh2_userauth_add_sigblob(
struct ssh2_userauth_state *s, PktOut *pkt, ptrlen pkblob, ptrlen sigblob)
{
BinarySource pk[1], sig[1];
Add and use BinarySource_*INIT_PL. A great many BinarySource_BARE_INIT calls are passing the two halves of a ptrlen as separate arguments. It saves a lot of call-site faff to have a variant of the init function that just takes the whole ptrlen in one go.
2019-02-06 20:47:18 +00:00
BinarySource_BARE_INIT_PL(pk, pkblob);
BinarySource_BARE_INIT_PL(sig, sigblob);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
/* dmemdump(pkblob, pkblob_len); */
/* dmemdump(sigblob, sigblob_len); */
/*
* See if this is in fact an ssh-rsa signature and a buggy
* server; otherwise we can just do this the easy way.
*/
if ((s->ppl.remote_bugs & BUG_SSH2_RSA_PADDING) &&
ptrlen_eq_string(get_string(pk), "ssh-rsa") &&
ptrlen_eq_string(get_string(sig), "ssh-rsa")) {
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
ptrlen mod_mp, sig_mp;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
size_t sig_prefix_len;
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
/*
* Find the modulus and signature integers.
*/
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
get_string(pk); /* skip over exponent */
mod_mp = get_string(pk); /* remember modulus */
sig_prefix_len = sig->pos;
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
sig_mp = get_string(sig);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (get_err(pk) || get_err(sig))
goto give_up;
/*
* Find the byte length of the modulus, not counting leading
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
* zeroes.
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
*/
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
while (mod_mp.len > 0 && *(const char *)mod_mp.ptr == 0) {
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
mod_mp.len--;
mod_mp.ptr = (const char *)mod_mp.ptr + 1;
}
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
/* debug("modulus length is %d\n", len); */
/* debug("signature length is %d\n", siglen); */
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
if (mod_mp.len != sig_mp.len) {
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
strbuf *substr = strbuf_new();
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
put_data(substr, sigblob.ptr, sig_prefix_len);
put_uint32(substr, mod_mp.len);
put_padding(substr, mod_mp.len - sig_mp.len, 0);
put_datapl(substr, sig_mp);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringsb(pkt, substr);
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
return;
}
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
Whitespace rationalisation of entire code base. The number of people has been steadily increasing who read our source code with an editor that thinks tab stops are 4 spaces apart, as opposed to the traditional tty-derived 8 that the PuTTY code expects. So I've been wondering for ages about just fixing it, and switching to a spaces-only policy throughout the code. And I recently found out about 'git blame -w', which should make this change not too disruptive for the purposes of source-control archaeology; so perhaps now is the time. While I'm at it, I've also taken the opportunity to remove all the trailing spaces from source lines (on the basis that git dislikes them, and is the only thing that seems to have a strong opinion one way or the other). Apologies to anyone downstream of this code who has complicated patch sets to rebase past this change. I don't intend it to be needed again.
2019-09-08 19:29:00 +00:00
/* Otherwise fall through and do it the easy way. We also come
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
* here as a fallback if we discover above that the key blob
* is misformatted in some way. */
give_up:;
}
put_stringpl(pkt, sigblob);
}
#ifndef NO_GSSAPI
static PktOut *ssh2_userauth_gss_packet(
struct ssh2_userauth_state *s, const char *authtype)
{
strbuf *sb;
PktOut *p;
Ssh_gss_buf buf;
Ssh_gss_buf mic;
/*
* The mic is computed over the session id + intended
* USERAUTH_REQUEST packet.
*/
sb = strbuf_new();
put_stringpl(sb, s->session_id);
put_byte(sb, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(sb, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(sb, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(sb, authtype);
/* Compute the mic */
buf.value = sb->s;
buf.length = sb->len;
s->shgss->lib->get_mic(s->shgss->lib, s->shgss->ctx, &buf, &mic);
strbuf_free(sb);
/* Now we can build the real packet */
if (strcmp(authtype, "gssapi-with-mic") == 0) {
p = ssh_bpp_new_pktout(s->ppl.bpp, SSH2_MSG_USERAUTH_GSSAPI_MIC);
} else {
p = ssh_bpp_new_pktout(s->ppl.bpp, SSH2_MSG_USERAUTH_REQUEST);
put_stringz(p, s->username);
ssh2userauth: stop hardcoding the successor layer name. Not that we ever actually _support_ trying to authenticate for any SSH subprotocol other than "ssh-connection", or any plans to add such support. But it's inelegant to hardcode it at all when we have it right there in the successor layer's vtable.
2018-10-09 17:11:17 +00:00
put_stringz(p, s->successor_layer->vt->name);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
put_stringz(p, authtype);
}
put_string(p, mic.value, mic.length);
return p;
}
#endif
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
static bool ssh2_userauth_get_specials(
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
PacketProtocolLayer *ppl, add_special_fn_t add_special, void *ctx)
{
/* No specials provided by this layer. */
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 19:50:29 +00:00
return false;
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
}
static void ssh2_userauth_special_cmd(PacketProtocolLayer *ppl,
SessionSpecialCode code, int arg)
{
/* No specials provided by this layer. */
}
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 19:23:19 +00:00
static bool ssh2_userauth_want_user_input(PacketProtocolLayer *ppl)
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
{
struct ssh2_userauth_state *s =
Rename FROMFIELD to 'container_of'. Ian Jackson points out that the Linux kernel has a macro of this name with the same purpose, and suggests that it's a good idea to use the same name as they do, so that at least some people reading one code base might recognise it from the other. I never really thought very hard about what order FROMFIELD's parameters should go in, and therefore I'm pleasantly surprised to find that my order agrees with the kernel's, so I don't have to permute every call site as part of making this change :-)
2018-10-05 22:49:08 +00:00
container_of(ppl, struct ssh2_userauth_state, ppl);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
return s->want_user_input;
}
static void ssh2_userauth_got_user_input(PacketProtocolLayer *ppl)
{
struct ssh2_userauth_state *s =
Rename FROMFIELD to 'container_of'. Ian Jackson points out that the Linux kernel has a macro of this name with the same purpose, and suggests that it's a good idea to use the same name as they do, so that at least some people reading one code base might recognise it from the other. I never really thought very hard about what order FROMFIELD's parameters should go in, and therefore I'm pleasantly surprised to find that my order agrees with the kernel's, so I don't have to permute every call site as part of making this change :-)
2018-10-05 22:49:08 +00:00
container_of(ppl, struct ssh2_userauth_state, ppl);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
if (s->want_user_input)
queue_idempotent_callback(&s->ppl.ic_process_queue);
}
static void ssh2_userauth_reconfigure(PacketProtocolLayer *ppl, Conf *conf)
{
struct ssh2_userauth_state *s =
Rename FROMFIELD to 'container_of'. Ian Jackson points out that the Linux kernel has a macro of this name with the same purpose, and suggests that it's a good idea to use the same name as they do, so that at least some people reading one code base might recognise it from the other. I never really thought very hard about what order FROMFIELD's parameters should go in, and therefore I'm pleasantly surprised to find that my order agrees with the kernel's, so I don't have to permute every call site as part of making this change :-)
2018-10-05 22:49:08 +00:00
container_of(ppl, struct ssh2_userauth_state, ppl);
Move most of ssh.c out into separate source files. I've tried to separate out as many individually coherent changes from this work as I could into their own commits, but here's where I run out and have to commit the rest of this major refactoring as a big-bang change. Most of ssh.c is now no longer in ssh.c: all five of the main coroutines that handle layers of the SSH-1 and SSH-2 protocols now each have their own source file to live in, and a lot of the supporting functions have moved into the appropriate one of those too. The new abstraction is a vtable called 'PacketProtocolLayer', which has an input and output packet queue. Each layer's main coroutine is invoked from the method ssh_ppl_process_queue(), which is usually (though not exclusively) triggered automatically when things are pushed on the input queue. In SSH-2, the base layer is the transport protocol, and it contains a pair of subsidiary queues by which it passes some of its packets to the higher SSH-2 layers - first userauth and then connection, which are peers at the same level, with the former abdicating in favour of the latter at the appropriate moment. SSH-1 is simpler: the whole login phase of the protocol (crypto setup and authentication) is all in one module, and since SSH-1 has no repeat key exchange, that setup layer abdicates in favour of the connection phase when it's done. ssh.c itself is now about a tenth of its old size (which all by itself is cause for celebration!). Its main job is to set up all the layers, hook them up to each other and to the BPP, and to funnel data back and forth between that collection of modules and external things such as the network and the terminal. Once it's set up a collection of packet protocol layers, it communicates with them partly by calling methods of the base layer (and if that's ssh2transport then it will delegate some functionality to the corresponding methods of its higher layer), and partly by talking directly to the connection layer no matter where it is in the stack by means of the separate ConnectionLayer vtable which I introduced in commit 8001dd4cb, and to which I've now added quite a few extra methods replacing services that used to be internal function calls within ssh.c. (One effect of this is that the SSH-1 and SSH-2 channel storage is now no longer shared - there are distinct struct types ssh1_channel and ssh2_channel. That means a bit more code duplication, but on the plus side, a lot fewer confusing conditionals in the middle of half-shared functions, and less risk of a piece of SSH-1 escaping into SSH-2 or vice versa, which I remember has happened at least once in the past.) The bulk of this commit introduces the five new source files, their common header sshppl.h and some shared supporting routines in sshcommon.c, and rewrites nearly all of ssh.c itself. But it also includes a couple of other changes that I couldn't separate easily enough: Firstly, there's a new handling for socket EOF, in which ssh.c sets an 'input_eof' flag in the BPP, and that responds by checking a flag that tells it whether to report the EOF as an error or not. (This is the main reason for those new BPP_READ / BPP_WAITFOR macros - they can check the EOF flag every time the coroutine is resumed.) Secondly, the error reporting itself is changed around again. I'd expected to put some data fields in the public PacketProtocolLayer structure that it could set to report errors in the same way as the BPPs have been doing, but in the end, I decided propagating all those data fields around was a pain and that even the BPPs shouldn't have been doing it that way. So I've reverted to a system where everything calls back to functions in ssh.c itself to report any connection- ending condition. But there's a new family of those functions, categorising the possible such conditions by semantics, and each one has a different set of detailed effects (e.g. how rudely to close the network connection, what exit status should be passed back to the whole application, whether to send a disconnect message and/or display a GUI error box). I don't expect this to be immediately perfect: of course, the code has been through a big upheaval, new bugs are expected, and I haven't been able to do a full job of testing (e.g. I haven't tested every auth or kex method). But I've checked that it _basically_ works - both SSH protocols, all the different kinds of forwarding channel, more than one auth method, Windows and Linux, connection sharing - and I think it's now at the point where the easiest way to find further bugs is to let it out into the wild and see what users can spot.
2018-09-24 17:28:16 +00:00
ssh_ppl_reconfigure(s->successor_layer, conf);
}
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
static void ssh2_userauth_antispoof_msg(
struct ssh2_userauth_state *s, const char *msg)
{
strbuf *sb = strbuf_new();
Seat method to set the current trust status. In terminal-based GUI applications, this is passed through to term_set_trust_status, to toggle whether lines are prefixed with the new trust sigil. In console applications, the function returns false, indicating to the backend that it should employ some other technique for spoofing protection.
2019-03-10 14:42:11 +00:00
if (seat_set_trust_status(s->ppl.seat, true)) {
/*
* If the seat can directly indicate that this message is
* generated by the client, then we can just use the message
* unmodified as an unspoofable header.
*/
put_datapl(sb, ptrlen_from_asciz(msg));
} else {
/*
* Otherwise, add enough padding around it that the server
* wouldn't be able to mimic it within our line-length
* constraint.
*/
strbuf_catf(sb, "-- %s ", msg);
while (sb->len < 78)
put_byte(sb, '-');
}
Anti-spoofing protection for SSH auth banners. The banner text sent by the server was already being run through a StripCtrlChars. Now it's run through one in line-limiting mode, and surrounded by header and footer lines long enough that the line-length limit wouldn't allow the server to counterfeit one. So it should now be reliably possible to tell what is banner text sent by the server, and what is not.
2019-03-03 19:38:35 +00:00
put_datapl(sb, PTRLEN_LITERAL("\r\n"));
seat_stderr_pl(s->ppl.seat, ptrlen_from_strbuf(sb));
strbuf_free(sb);
}
Reference in New Issue Copy Permalink