Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
in the session name box. Thwarted on Unix by GTK not automatically
scrolling the listbox to the selected item, but we can fix that in
the platform-specific side later.
[originally from svn r6337]
there are servers which could in principle operate in this mode, although I
don't know if any do in practice. (Hence, I haven't been able to test it.)
[originally from svn r5748]
[this svn revision also touched putty-wishlist]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
that the global `sesslist' got out of sync with the saved-sessions submenu,
causing the latter to launch the wrong sessions.
Also, Change Settings wasn't getting a fresh session list, so if the set of
sessions had changed since session startup it wouldn't reflect that (at least
until a session was saved). Fixed (on all platforms).
Therefore, since the global sesslist didn't seem to be useful, I've got rid
of it; config.c creates one as needed, as do the frontends. (Not tried
compiling Mac changes.)
Also, we now build the saved-sessions submenu on demand on Windows and Unix.
(This should probably also be done on the Mac.)
[originally from svn r5609]
discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol
version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com
implementations in this scheme). <http://www.snailbook.com/terms.html>
[originally from svn r5480]
cfg.remote_cmd is to be used, rather than actually pointing at
cfg.remote_cmd. This change restores the ability to structure-copy
Configs without breaking them. (Though of course this is only a
temporary solution: really what wants doing is to fix
`config-struct'.)
[originally from svn r5335]
deal with rekeys at all: they totally ignore mid-session KEXINIT
sent by the client. Hence, a new bug entry so we don't try it.
[originally from svn r5092]
the config should do when IPv6 is configured out. They shouldn't sit
there looking silly with only `Auto' and `IPv4' settings: they
should instead be completely absent. I had thought the former was
acceptable since IPv4-only was a configuration that people should
only be using if their compilers didn't support IPv6, but now it
occurs to me that ports to fundamentally non-IPv6-supporting
platforms are not implausible, and on such ports the presence of a
vestigial config option under the _standard_ build conditions would
be a low-quality solution.
[originally from svn r5084]
mid-session in SSH2: this forces an immediate rekey to activate the
new settings. I'm not sure exactly what this will be useful for
(except possibly it might make comparative performance testing
easier?), but it has wonderful James Bond value for being able to
switch to a more secure cipher before doing anything sensitive :-)
If, that is, you weren't using the most secure one to begin with...
[originally from svn r5051]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
to manipulate settings they can't see so could lead to confusion. (Also remove
"Delete" button for some sort of UI consistency even though it's harmless.)
Also conditionalise other aspects of sessionsaver_handler() that don't make
sense mid-session.
[originally from svn r5043]
mid-session if we are not using SSHv1. I've done this by introducing
a generic `cfg_info' function which every back end can use to
communicate an int's worth of data to setup_config_box; in SSH
that's the protocol version in use, and in everything else it's
currently zero.
[originally from svn r5040]
[r5031 == d77102a8d5]
the difficult questions about when it's sensible to offer the option
of saving to the slot we loaded from: _we never do_. The user must
always explicitly specify a slot to save to.
[originally from svn r5035]
[this svn revision also touched putty-wishlist]
bit is working out when to reschedule the next rekey for when the
timeout or data limit changes; sometimes it will be _right now_
because we're already over the new limit.
Still to do: the Kex panel should not appear in mid-session if we
are using SSHv1.
[originally from svn r5031]
Change Settings, the port forwarding setup function is run again,
and tags all existing port forwardings as `do not keep'. Then it
iterates through the config in the normal way; when it encounters a
port forwarding which is already in the tree, it tags it `keep'
rather than setting it up from scratch. Finally, it goes through the
tree and removes any that haven't been labelled `keep'. Hence,
editing the list of forwardings in Change Settings has the effect of
cancelling any forwardings you remove, and adding any new ones.
The SSH panel now appears in the reconfig box, and is empty apart
from a message explaining that it has to be there for subpanels of
it to exist. Better wording for this message would be welcome.
[originally from svn r5030]
(which will gain more content anon).
Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never
did find a way of automatically detecting this alleged server bug, and in any
case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW).
Also generalise askcipher() to a new askalg() (thus touching all the
front-ends).
I've made some attempt to document what SSH key exchange is and why you care,
but it could use some review for clarity (and outright lies).
[originally from svn r5022]
results in unacceptable performance for him on Win2000. Add a checkbox to
revert to the old behaviour.
[originally from svn r4988]
[this svn revision also touched putty-wishlist]
sessionsaver_handler after processing a one-click saved session
launch, to protect against accidentally calling dlg_end twice on the
same dialog.
[originally from svn r4779]
into the Connection panel, and implemented support for the SSH2
"env" request. (I haven't yet found a server which accepts this
request, so although I've visually checked the packet log and it
looks OK, I haven't yet been able to do a full end-to-end test.)
Also, the `pty' backend reads this data and does a series of
`putenv' commands before launching the shell or application.
This is mostly because in last week's UTF-8 faffings I got
thoroughly sick of typing `export LANG=en_GB.UTF-8' every time I
started a new testing pterm, and it suddenly occurred to me that
this would be precisely the sort of thing you'd want to have pterm
set up for you, particularly since you can configure it alongside
the translation settings and so you can ensure they match up
properly.
[originally from svn r4645]
PuTTY / Plink not to run a remote shell/command at all. Supported in
the GUI configuration and via the (OpenSSH-like) -N command-line
option.
No effort is currently made to arrange `nice' UI properties. If you
do this in GUI PuTTY, a full-size terminal window will still be
created, and will sit there with almost nothing in it throughout
your session. If you do it in Plink, Plink will not accept any kind
of request to terminate gracefully; you'll have to ^C or kill it.
Nonetheless, even this little will be useful to some people...
[originally from svn r4614]
by default (although they can be included). There's also an option to remove
session data, which is good both for privacy and for reducing the size of
logfiles.
[originally from svn r4593]
No very good reason, but I've occasionally wanted to frob it to see if it
makes any difference to problems I'm having, and it was easy.
Tested that it does actually cause keepalives on Windows (with tcpdump);
should also work on Unix. Not implemented on Mac (does nothing), but then
neither is TCP_NODELAY.
Quite a big checkin, much of which is adding `keepalive' alongside `nodelay'
in network function calls.
[originally from svn r4309]
there is a structure copy of a Config, which invalidated the remote_cmd_ptr
in that structure (pointing to its own remote_cmd).
This was causing remote commands not to be executed in this special case.
I've patched the pointer up manually (as is done in plink.c), but ugh.
[originally from svn r4140]
(we didn't before) - `ssh-termspeed'.
In the process, I've removed the individual controls on the Telnet and
Rlogin panels and replaced them with one on the Connection panel (since they
were backed by the same storage anyway).
The terminal speeds sent in SSH are logged in the Event Log.
[originally from svn r4133]
option from the Selection panel to the Translation panel (where it
fits at least as well). This frees a line in the Selection panel
which I'm about to use for an additional mouse handling option.
[originally from svn r3564]
box, in that it started to expand under the weight of proxy options.
Now fixed, by folding the SOCKS version selector into the general
proxy type selector so there's one single 5- or 6-way radio button
set split over two lines. settings.c has of course grown a backwards
compatibility wart to deal with legacy config data.
[originally from svn r3168]
now not show up when it's meaningless (in PuTTYtel, in pterm, and
in the middle of any non-SSH session), and the Connection panel is
inhibited completely in pterm.
[originally from svn r3146]
had to move another of its values out into wincfg.c - paradoxically,
this was the `font has X encoding' option! (Because the Unix font
handling code expects to be able to tell for _itself_ whether it has
a font with X-encoded line drawing glyphs.)
[originally from svn r3145]
hazard. I considered removing it completely, but I can't rule out
the possibility of an OS that actually takes security of its
terminal devices seriously, and which might be able to make sensible
and safe use of this feature.
[originally from svn r3103]
particular, the config box uses it in place of the word `PuTTY',
which means mid-session reconfig in pterm will look less strange
once I implement it. Also, while I'm at it, I've personalised all
the dialog boxes and menu items and suchlike so that PuTTYtel
actually claims to be PuTTYtel rather than PuTTY.
[originally from svn r3074]
former by simply removing it; the latter by adding an enumeration
function to libcharset.) This has had slight `const' repercussions
on cp_name() and cp_enumerate() which might break the Mac build.
[originally from svn r3064]
supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS
5 isn't supported, but it'll be no difficulty once I actually get
round to it). Thanks to Chas Honton for his `stone soup' patch: I
didn't end up actually using any of his code, but it galvanised me
into doing it properly myself :-)
[originally from svn r3055]
malloc functions, which automatically cast to the same type they're
allocating the size of. Should prevent any future errors involving
mallocing the size of the wrong structure type, and will also make
life easier if we ever need to turn the PuTTY core code from real C
into C++-friendly C. I haven't touched the Mac frontend in this
checkin because I couldn't compile or test it.
[originally from svn r3014]
the RGB values (it deals in floats with 2 d.p. instead). Hence I've
replaced the static RGB text item in the Colours panel with three
little edit boxes, so that a user can type in exact 0-255 RGB values
if necessary. This should have the additional advantage of being
quicker than faffing with the colour selector if you already know
exactly what you want and are in a hurry!
[originally from svn r2978]
Buttons now have an `iscancel' flag to go with `isdefault';
dlg_last_focused() now explicitly passes the control it _doesn't_
care about (`I want the last control that had focus and isn't this
one'); and in the GTK implementation, various fixes have happened,
notably including arrow keys working sensibly in list boxes and the
treeview and short font aliases being expanded correctly to
initialise the font selectors.
[originally from svn r2958]
Unix-specific config items; moved a stray Windows-specific config
item (scrollbar-in-fullscreen) out into wincfg.c to stop it
appearing on Unix; continued updates to gtkdlg.c. I now believe the
GTK config box looks basically correct (modulo minor cosmetic issues
and keyboard accelerators). Next step, add the event handling so
it's actually functional.
[originally from svn r2933]
(list boxes are particularly conspicuously absent), it has no event
handling at all, and it isn't in any way integrated into pterm - you
have to build it specially using the test stubs in gtkdlg.c. But
what there is so far seems to work plausibly well, so it's a start.
Rather than browbeat the existing GTK container/layout widgets into
doing what I wanted, I decided to implement two subclasses of
GtkContainer myself, which implement precisely the layout model
assumed by the config box specification; this has the rather cool
consequence that the box can be resized and will maintain the same
layout at all times that it would have had if initially created at
that size.
[originally from svn r2931]
in the portable dialog interface. This has allowed me to remove
`ssd->savedsession' in config.c, which was (I believe) the only
out-of-place piece of per-instance data in the dialog template
stuff. Now we should actually be able to run more than one config
box in the same process at the same time (for platforms that'll find
that useful).
[originally from svn r2925]
clears, and also to temporarily push the primary screen contents
into the scrollback while the alternate screen is active and bring
it back afterwards.
[originally from svn r2910]
to pieces, and put it back together in a new table-driven form.
config.c sets up a data structure describing most of the config box;
wincfg.c adds in the Windows-specific options (so that config.c can
also form the basis for Mac and Unix config boxes). Then winctrls.c
contains a shiny new layout engine which consumes that data
structure, and windlg.c passes all WM_COMMAND and similar messages
to a driver alongside that layout engine. In the process I've sorted
out nicer-looking panel titles and finally fixed the list-boxes-are-
never-the-right-size bug (turned out to be Windows's fault, of
course). I _believe_ it should do everything the old config box did,
including context help. Now everyone has to test it thoroughly...
[originally from svn r2908]
