The number of people has been steadily increasing who read our source
code with an editor that thinks tab stops are 4 spaces apart, as
opposed to the traditional tty-derived 8 that the PuTTY code expects.
So I've been wondering for ages about just fixing it, and switching to
a spaces-only policy throughout the code. And I recently found out
about 'git blame -w', which should make this change not too disruptive
for the purposes of source-control archaeology; so perhaps now is the
time.
While I'm at it, I've also taken the opportunity to remove all the
trailing spaces from source lines (on the basis that git dislikes
them, and is the only thing that seems to have a strong opinion one
way or the other).
Apologies to anyone downstream of this code who has complicated patch
sets to rebase past this change. I don't intend it to be needed again.
Having decided that the terminal's local echo setting shouldn't be
allowed to propagate through to termios, I think the local edit
setting shouldn't either. Also, no other terminal emulator I know
seems to implement this sequence, and if you enable it, things get
very confused in general. I think it's generally better off absent; if
somebody turns out to have been using it, then we'll at least be able
to find out what it's good for.
The functions that previously lived in it now live in terminal.c
itself; they've been renamed term_keyinput and term_keyinputw, and
their function is to add data to the terminal's user input buffer from
a char or wchar_t string respectively.
They sit more comfortably in terminal.c anyway, because their whole
point is to translate into the character encoding that the terminal is
currently configured to use. Also, making them part of the terminal
code means they can also take care of calling term_seen_key_event(),
which simplifies most of the call sites in the GTK and Windows front
ends.
Generation of text _inside_ terminal.c, from responses to query escape
sequences, is therefore not done by calling those external entry
points: we send those responses directly to the ldisc, so that they
don't count as keypresses for all the user-facing purposes like bell
overload handling and scrollback reset. To make _that_ convenient,
I've arranged that most of the code that previously lived in
lpage_send and luni_send is now in separate translation functions, so
those can still be called from situations where you're not going to do
the default thing with the translated data.
(However, pasted data _does_ still count as close enough to a keypress
to call term_seen_key_event - but it clears the 'interactive' flag
when the data is passed on to the line discipline, which tweaks a
minor detail of control-char handling in line ending mode but mostly
just means pastes aren't interrupted.)
Those two flags had the opposite sense to what you might expect: each
one is the value of the Conf entry corresponding to the checkbox that
_disables_ the corresponding terminal feature. So term->bidi is true
if and only if bidi is _off_.
I think that confusion of naming probably contributed to the control-
flow error fixed in the previous commit, just by increasing cognitive
load until I couldn't remember which flags were set where any more! So
now I've renamed the two fields of Terminal, and the corresponding
Conf keywords, to be called "no_bidi" and "no_arabicshaping", in line
with other 'disable this feature' flags, so that it's clear what the
sense should be.
This prevents an assertion failure when random_ref() tries to create
a new PRNG instance and finds there already is one. It also exposes
bugs in which some code path forgot to initialise the PRNG when it
was going to need it, such as the one fixed in the previous commit.
At the point when we change over the seat's trust status to untrusted
for the last time, to finish authentication, Plink will now present a
final interactive prompt saying 'Press Return to begin session'. This
is a hint that anything after that that resembles an auth prompt
should be treated with suspicion, because _PuTTY_ thinks it's finished
authenticating.
This is of course an annoying inconvenience for interactive users, so
I've tried to reduce its impact as much as I can. It doesn't happen in
GUI PuTTY at all (because the trust sigil system is used instead); it
doesn't happen if you use plink -batch (because then the user already
knows that they _never_ expect an interactive prompt); and it doesn't
happen if Plink's standard input is being redirected from anywhere
other than the terminal / console (because then it would be pointless
for the server to try to scam passphrases out of the user anyway,
since the user isn't in a position to enter one in response to a spoof
prompt). So it should only happen to people who are using Plink in a
terminal for interactive login purposes, and that's not _really_ what
I ever intended Plink to be used for (which is why it's never had any
out-of-band control UI like OpenSSH's ~ system).
If anyone _still_ doesn't like this new prompt, it can also be turned
off using the new -no-antispoof flag, if the user is willing to
knowingly assume the risk.
In terminal-based GUI applications, this is passed through to
term_set_trust_status, to toggle whether lines are prefixed with the
new trust sigil. In console applications, the function returns false,
indicating to the backend that it should employ some other technique
for spoofing protection.
This indicates that a line contains trusted information (originated by
PuTTY) or untrusted (from the server). Trusted lines are prefixed by a
three-column signature consisting of the trust sigil (i.e. PuTTY icon)
and a separating space.
To protect against a server using escape sequences to move the cursor
back up to a trusted line and overwrite its contents, any attempt to
write to a termline is preceded by a call to check_trust_status(),
which clears the line completely if the terminal's current trust
status is different from the previous state of that line.
In the terminal data structures, the trust sigil is represented by
0xDFFE (an otherwise unused value, because it's in the surrogate
space). For bidi purposes I've arranged to treat that value as
direction-neutral, so that it will appear on the right if a terminal
line needs it to. (Not that that's currently likely to happen, with
PuTTY not being properly localised, but it's a bit of futureproofing.)
The bidi system is also where I actually insert the trust sigil: the
_logical_ terminal data structures don't include it. term_bidi_line
was a convenient place to add it, because that function was already
transforming a logical terminal line into a physical one in a way that
also generates a logical<->physical mapping table for handling mouse
clicks and cursor positioning; so that function now adds the trust
sigil as well as running the bidi algorithm.
(A knock-on effect of _that_ is that the log<->phys position map now
has to have a value for 'no correspondence', because if the user does
click on the trust sigil, there's no logical terminal position
corresponding to that. So the map can now contain the special value
BIDI_CHAR_INDEX_NONE, and anyone looking things up in it has to be
prepared to receive that as an answer.)
Of course, this terminal-data transformation can't be kept _wholly_
within term_bidi_line, because unlike proper bidi, it actually reduces
the number of visible columns on the line. So the wrapping code
(during glyph display and also copy and paste) has to take account of
the trusted status and use it to ignore the last 3 columns of the
line. This is probably not done absolutely perfectly, but then, it
doesn't need to be - trusted lines will be filled with well-controlled
data generated from the SSH code, which won't be doing every trick in
the book with escape sequences. Only untrusted terminal lines will be
using all the terminal's capabilities, and they don't have this sigil
getting in the way.
This is not yet used by anything, but the idea is that it'll be a
graphic in the terminal window that can't be replicated by a server
sending escape sequences, and hence can be used as a reliable
indication that the text on a particular terminal line is generated by
PuTTY itself and not passed through from the server. This will make it
possible to detect a malicious server trying to mimic local prompts to
trick you out of information that shouldn't be sent over the wire
(such as private-key passphrases).
The trust sigil I've picked is a small copy of the PuTTY icon, which
is thematically nice (it can be read as if the PuTTY icon is the name
of the speaker in a dialogue) and also convenient because we had that
graphic available already on all platforms. (Though the contortions I
had to go through to make the GTK 1 code draw it were quite annoying.)
The trust sigil has the same dimensions as a CJK double-width
character, i.e. it's 2 character cells wide by 1 high.
This goes with the existing 'to_server' flag (indicating whether the
values typed by the user are going to be sent over the wire or remain
local), to indicate whether the _text of the prompts_ has come over
the wire or is originated locally.
Like to_server, nothing yet uses this. It's a hedge against the
possibility of maybe having an option for all the auth prompts to work
via GUI dialog boxes.
I've always thought poll was more hassle to set up, because if you
want to reuse part of your pollfds list between calls then you have to
index every fd by its position in the list as well as the fd number
itself, which gives you twice as many indices to keep track of than if
the fd is always its own key.
But the problem is that select is fundamentally limited to the range
of fds that can fit in an fd_set, which is not the range of fds that
can _exist_, so I've had a change of heart and now have to go with
poll.
For the moment, I've surrounded it with a 'pollwrapper' structure that
lets me treat it more or less like select, containing a tree234 that
maps each fd to its location in the list, and also translating between
the simple select r/w/x classification and the richer poll flags.
That's let me do the migration with minimal disruption to the call
sites.
In future perhaps I can start using poll more directly, and/or using
the richer flag system (though the latter might be fiddly because of
sometimes being constrained to use the glib event loop). But this will
do for now.
A user reports that under OpenWatcom these are defined in <winnls.h>,
in which case it's redundant to redefine them ourselves and provokes a
compiler diagnostic.
Now instead of taking raw arguments to configure the output
StripCtrlChars with, it takes an enumerated value giving the context
of what's being sanitised, and allows the seat to decide what the
output parameters for that context should be.
The only context currently used is SIC_BANNER (SSH login banners).
I've also added a not-yet-used one for keyboard-interactive prompts.
If centralised code like the SSH implementation wants to sanitise
escape sequences out of a piece of server-provided text, it will need
to do it by making a locale-based StripCtrlChars if it's running in a
console context, or a Terminal-based one if it's in a GUI terminal-
window application.
All the other changes of behaviour needed between those two contexts
are handled by providing reconfigurable methods in the Seat vtable;
this one is no different. So now there's a new method in the Seat
vtable that will construct a StripCtrlChars appropriate to that kind
of seat. Terminal-window seats (gtkwin.c, window.c) implement it by
calling the new stripctrl_new_term(), and console ones use the locale-
based stripctrl_new().
The idea of these is that they centralise the common idiom along the
lines of
if (logical_array_len >= physical_array_size) {
physical_array_size = logical_array_len * 5 / 4 + 256;
array = sresize(array, physical_array_size, ElementType);
}
which happens at a zillion call sites throughout this code base, with
different random choices of the geometric factor and additive
constant, sometimes forgetting them completely, and generally doing a
lot of repeated work.
The new macro sgrowarray(array,size,n) has the semantics: here are the
array pointer and its physical size for you to modify, now please
ensure that the nth element exists, so I can write into it. And
sgrowarrayn(array,size,n,m) is the same except that it ensures that
the array has size at least n+m (so sgrowarray is just the special
case where m=1).
Now that this is a single centralised implementation that will be used
everywhere, I've also gone to more effort in the implementation, with
careful overflow checks that would have been painful to put at all the
previous call sites.
This commit also switches over every use of sresize(), apart from a
few where I really didn't think it would gain anything. A consequence
of that is that a lot of array-size variables have to have their types
changed to size_t, because the macros require that (they address-take
the size to pass to the underlying function).
This replaces all the macros like ssh_key_sign() and win_draw_text()
which take an object containing a vtable pointer and do the
dereferencing to find the actual concrete method to call. Now they're
all inline functions, which means more sensible type-checking and more
comprehensible error reports when the types go wrong, and also means
that there's no risk of double-evaluating the object argument.
Previously, any double-width character would break the bidi algorithm,
because of the quirk of data representation in which we store UCSWIDE
(0xDFFF) in the right-hand termchar overlapped by the character.
UCSWIDE has bidirectional character class L according to minibidi's
getType(), so it disrupted the algorithm.
Now we remove UCSWIDE from the input line before passing it to
do_bidi(), replacing it with an 'nchars' field in the bidi_char
structure indicating single or double width, and put the UCSWIDEs back
afterwards once do_bidi returns.
Although I've reinstated the tedious manual mouse input, I can at
least reduce the amount of it that the user is required to provide:
the new PRNG has a hard limit on the size of its seed, so once we've
generated enough entropy to fill that up, there's no point in
collecting more, even if we're generating a particularly large key.
Now that all the call sites are expecting a size_t instead of an int
length field, it's no longer particularly difficult to make it
actually return the pointer,length pair in the form of a ptrlen.
It would be nice to say that simplifies call sites because those
ptrlens can all be passed straight along to other ptrlen-consuming
functions. Actually almost none of the call sites are like that _yet_,
but this makes it possible to move them in that direction in future
(as part of my general aim to migrate ptrlen-wards as much as I can).
But also it's just nicer to keep the pointer and length together in
one variable, and not have to declare them both in advance with two
extra lines of boilerplate.
This is a general cleanup which has been overdue for some time: lots
of length fields are now the machine word type rather than the (in
practice) fixed 'int'.
This tears out the entire previous random-pool system in sshrand.c. In
its place is a system pretty close to Ferguson and Schneier's
'Fortuna' generator, with the main difference being that I use SHA-256
instead of AES for the generation side of the system (rationale given
in comment).
The PRNG implementation lives in sshprng.c, and defines a self-
contained data type with no state stored outside the object, so you
can instantiate however many of them you like. The old sshrand.c still
exists, but in place of the previous random pool system, it's just
become a client of sshprng.c, whose job is to hold a single global
instance of the PRNG type, and manage its reference count, save file,
noise-collection timers and similar administrative business.
Advantages of this change include:
- Fortuna is designed with a more varied threat model in mind than my
old home-grown random pool. For example, after any request for
random numbers, it automatically re-seeds itself, so that if the
state of the PRNG should be leaked, it won't give enough
information to find out what past outputs _were_.
- The PRNG type can be instantiated with any hash function; the
instance used by the main tools is based on SHA-256, an improvement
on the old pool's use of SHA-1.
- The new PRNG only uses the completely standard interface to the
hash function API, instead of having to have privileged access to
the internal SHA-1 block transform function. This will make it
easier to revamp the hash code in general, and also it means that
hardware-accelerated versions of SHA-256 will automatically be used
for the PRNG as well as for everything else.
- The new PRNG can be _tested_! Because it has an actual (if not
quite explicit) specification for exactly what the output numbers
_ought_ to be derived from the hashes of, I can (and have) put
tests in cryptsuite that ensure the output really is being derived
in the way I think it is. The old pool could have been returning
any old nonsense and it would have been very hard to tell for sure.
The upcoming PRNG revamp will want to tell noise sources apart, so
that it can treat them all fairly. So I've added an extra parameter to
noise_ultralight and random_add_noise, which takes values in an
enumeration covering all the vague classes of entropy source I'm
collecting. In this commit, though, it's simply ignored.
This is in preparation for a PRNG revamp which will want to have a
well defined boundary for any given request-for-randomness, so that it
can destroy the evidence afterwards. So no more looping round calling
random_byte() and then stopping when we feel like it: now you say up
front how many random bytes you want, and call random_read() which
gives you that many in one go.
Most of the call sites that had to be fixed are fairly mechanical, and
quite a few ended up more concise afterwards. A few became more
cumbersome, such as mp_random_bits, in which the new API doesn't let
me load the random bytes directly into the target integer without
triggering undefined behaviour, so instead I have to allocate a
separate temporary buffer.
The _most_ interesting call site was in the PKCS#1 v1.5 padding code
in sshrsa.c (used in SSH-1), in which you need a stream of _nonzero_
random bytes. The previous code just looped on random_byte, retrying
if it got a zero. Now I'm doing a much more interesting thing with an
mpint, essentially scaling a binary fraction repeatedly to extract a
number in the range [0,255) and then adding 1 to it.
A long time ago, in commit 4d77b6567, I moved the generation of the
arrow-key escape sequences into a function format_arrow_key(). Mostly
the reason for that was a special purpose I had in mind at the time
which involved auto-generating the same sequences in response to
things other than a keypress, but I always thought it would be nice to
centralise a lot more of PuTTY's complicated keyboard handling in the
same way - at least the handling of the function keys and their
numerous static and dynamic config options.
In this year's general spirit of tidying up and refactoring, I think
it's finally time. So here I introduce three more centralised
functions for dealing with the numbered function keys, the small
keypad (Ins, Home, PgUp etc) and the numeric keypad. Lots of horrible
and duplicated code from the key handling functions in window.c and
gtkwin.c is now more sensibly centralised: each platform keyboard
handler concerns itself with the local format of a keyboard event and
platform-specific enumeration of key codes, and once it's decided what
the logical key press actually _is_, it hands off to the new functions
in terminal.c to generate the appropriate escape code.
Mostly this is intended to be a refactoring without functional change,
leaving the keyboard handling how it's always been. But in cases where
the Windows and GTK handlers were accidentally inconsistent, I've
fixed the inconsistency rather than carefully keeping both sides how
they were. Known consistency fixes:
- swapping the arrow keys between normal (ESC [ A) and application
(ESC O A) is now done by pressing Ctrl with them, and _not_ by
pressing Shift. That was how it was always supposed to work, and
how it's worked on GTK all along, but on Windows it's been done by
Shift as well since 2010, due to a bug at the call site of
format_arrow_key() introduced when I originally wrote that function.
- in Xterm function key mode plus application keypad mode, the /*-
keys on the numeric keypad now send ESC O {o,j,m} in place of ESC O
{Q,R,S}. That's how the Windows keyboard handler has worked all
along (it was a deliberate behaviour tweak for the Xterm-like
function key mode, because in that mode ESC O {Q,R,S} are generated
by F2-F4). But the GTK keyboard handler omitted that particular
special case and was still sending ESC O {Q,R,S} for those keys in
all application keypad modes.
- also in Xterm function key mode plus app keypad mode, we only
generates the app-keypad escape sequences if Num Lock is on; with
Num Lock off, the numeric keypad becomes arrow keys and
Home/End/etc, just as it would in non-app-keypad mode. Windows has
done this all along, but again, GTK lacked that special case.
This is mostly to make static analysers and compiler warnings a bit
happier - now they know that a call to, say, modalfatalbox() means
they don't have to worry about what the rest of the function will do.
This is another cleanup I felt a need for while I was doing
boolification. If you define a function or variable in one .c file and
declare it extern in another, then nothing will check you haven't got
the types of the two declarations mismatched - so when you're
_changing_ the type, it's a pain to make sure you've caught all the
copies of it.
It's better to put all those extern declarations in header files, so
that the declaration in the header is also in scope for the
definition. Then the compiler will complain if they don't match, which
is what I want.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
I think this is the full set of things that ought logically to be
boolean.
One annoyance is that quite a few radio-button controls in config.c
address Conf fields that are now bool rather than int, which means
that the shared handler function can't just access them all with
conf_{get,set}_int. Rather than back out the rigorous separation of
int and bool in conf.c itself, I've just added a similar alternative
handler function for the bool-typed ones.
It's not actually used anywhere yet, though. This is just adding the
accessor functions, which will enforce a rigorous separation between
conf keys typed as int and as bool.
This commit includes <stdbool.h> from defs.h and deletes my
traditional definitions of TRUE and FALSE, but other than that, it's a
100% mechanical search-and-replace transforming all uses of TRUE and
FALSE into the C99-standardised lowercase spellings.
No actual types are changed in this commit; that will come next. This
is just getting the noise out of the way, so that subsequent commits
can have a higher proportion of signal.
After the recent Seat and LogContext revamps, _nearly_ all the
remaining uses of the type 'Frontend' were in terminal.c, which needs
all sorts of interactions with the GUI window the terminal lives in,
from the obvious (actually drawing text on the window, reading and
writing the clipboard) to the obscure (minimising, maximising and
moving the window in response to particular escape sequences).
All of those functions are now provided by an abstraction called
TermWin. The few remaining uses of Frontend after _that_ are internal
to a particular platform directory, so as to spread the implementation
of that particular kind of Frontend between multiple source files; so
I've renamed all of those so that they take a more specifically named
type that refers to the particular implementation rather than the
general abstraction.
So now the name 'Frontend' no longer exists in the code base at all,
and everywhere one used to be used, it's completely clear whether it
was operating in one of Frontend's three abstract roles (and if so,
which), or whether it was specific to a particular implementation.
Another type that's disappeared is 'Context', which used to be a
typedef defined to something different on each platform, describing
whatever short-lived resources were necessary to draw on the terminal
window: the front end would provide a ready-made one when calling
term_paint, and the terminal could request one with get_ctx/free_ctx
if it wanted to do proactive window updates. Now that drawing context
lives inside the TermWin itself, because there was never any need to
have two of those contexts live at the same time.
(Another minor API change is that the window-title functions - both
reading and writing - have had a missing 'const' added to their char *
parameters / return values.)
I don't expect this change to enable any particularly interesting new
functionality (in particular, I have no plans that need more than one
implementation of TermWin in the same application). But it completes
the tidying-up that began with the Seat and LogContext rework.
In the very old days, when PuTTY was new and computers were slow, I
tried to implement a feature where scrolling the window would be
implemented using a fast rectangle-copy GDI operation, rather than an
expensive character-by-character redraw of all the changed areas.
It never quite worked right, and I ended up conditioning it out on
Windows, and never even tried to implement it on GTK. It's now been
sitting around unused for so long that I think it's no longer worth
keeping in the code at all - if I tried to put it back in, it surely
wouldn't even compile, and would need rewriting from scratch anyway.
Disturbingly, it looks as if I _tried_ to re-enable it at one point,
in that there was a '#define OPTIMISE_IS_SCROLL 1' in putty.h - but
that never had any effect, because the macro name is misspelled. All
the #ifdefs are for 'OPTIMISE_SCROLL', without the 'IS'. So despite
appearances, it really _has_ been conditioned out all along!
The main wildcard matching code now doesn't depend on having a NUL
terminator in the string to be matched; instead it works with a pair
of pointers, one working along the string as we match, and the other
identifying the end of the string, and tests that p < target_end
before dereferencing p. User-facing entry points now allow you to pass
either an ordinary ASCIZ const char * or a ptrlen, and set up
target_end accordingly.
For the moment, the _wildcard_ parameter still has to be an ordinary
null-terminated string, but who knows, maybe that will have to change
too at some later point.
Previously, it returned a human-readable string suitable for log
files, which tried to say something useful about the remote end of a
socket. Now it returns a whole SocketPeerInfo structure, of which that
human-friendly log string is just one field, but also some of the same
information - remote IP address and port, in particular - is provided
in machine-readable form where it's available.
That's more directly useful in uxpty.c (which is currently the only
actual client of the function), and also matches the data that SSH
clients send in "pty-req". Also, it makes that method behave more like
the GUI query function get_window_pixels used by terminal.c (with the
sole exception that unlike g_w_p it's allowed to return failure), so
it becomes even more trivial to implement in the GUI front ends.
This is in much the same style as the ttymodes revamp, using a header
file which can be included in different ways to either iterate over
_all_ the signals in the known list or just the ones for which a
definition exists on the target OS.
So this doesn't actually _remove_ the horrid pile of ifdefs in
mainchan_rcvd_exit_signal, but at least it puts it somewhere less
intrusive and more reusable.
This gets another big pile of logic out of ssh2connection and puts it
somewhere more central. Now the only thing left in ssh2connection is
the formatting and parsing of the various channel requests; the logic
deciding which ones to issue and what to do about them is devolved to
the Channel implementation, as it properly should be.
A function to compare two strings _both_ in ptrlen form (I've had
ptrlen_eq_string for ages, but for some reason, never quite needed
ptrlen_eq_ptrlen). A function to ask whether one ptrlen starts with
another (and, optionally, return a ptrlen giving the remaining part of
the longer string). And the va_list version of logeventf, which I
really ought to have written in the first place by sheer habit, even
if it was only needed by logeventf itself.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
This was used by ldisc to communicate back to the front end that a key
had been pressed (or rather, that a keypress had caused a nonzero
amount of session input data). Its only nontrivial implementation was
in gtkwin.c, which used that notification to implement the Unix GUI's
"close window on keypress, if the session was already over" policy.
(Which in turn is Unix-specific, because the rationale is that
sometimes X servers don't have a functioning window manager, so it's
useful to have a way of telling any application to close without using
WM-provided facilities like a close button.)
But gtkwin.c doesn't need to be told by the ldisc that a keypress
happened - it's the one _sending_ those keypresses to ldisc in the
first place! So I've thrown away the three stub implementations of
frontend_keypress, removed the call to it in ldisc.c, and replaced it
with calls in gtkwin.c at all the points during keypress handling
that call ldisc_send.
A visible effect is that pterm's close-on-keypress behaviour will now
only trigger on an actual (input-generating) _keypress_, and not on
other input generation such as a paste action. I think that's an
improvement.
One quite recent - an unused variable in the Windows code that was
obsoleted by commit cea1329b9 last month - and one not recent at all,
namely the obsolete declaration of begin_session() in putty.h that
hasn't existed since commit 7a79df8fe replaced it with the ldisc
system in *2001*!
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
It's never set to anything but NULL at any call site, and there's been
a FIXME comment in uxucs.c for ages saying it should be removed. I
think it only existed in the first place because it was a facility
supported by the underlying Windows API function and we couldn't see a
reason _not_ to pass it through. But I'm cleaning up FIXMEs, so we
should get rid of it.
(It stood for 'default used', incidentally - as in 'did the function
at any point have to make use of the parameter providing a default
fallback character?'. Nothing to do with _defusing_ things :-)
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
It is useful to be able to exclude the header so that the log file
can be used for realtime input to other programs such as Kst for
plotting live data from sensors.
We define a macro in terms of INT_MAX, so we ought to include
<limits.h> to ensure INT_MAX is defined, rather than depending on
every call site to have remembered to do that themselves.
In order to list cross-certifiable host keys in the GUI specials menu,
the SSH backend has been inventing new values on the end of the
Telnet_Special enumeration, starting from the value TS_LOCALSTART.
This is inelegant, and also makes it awkward to break up special
handlers (e.g. to dispatch different specials to different SSH
layers), since if all you know about a special is that it's somewhere
in the TS_LOCALSTART+n space, you can't tell what _general kind_ of
thing it is. Also, if I ever need another open-ended set of specials
in future, I'll have to remember which TS_LOCALSTART+n codes are in
which set.
So here's a revamp that causes every special to take an extra integer
argument. For all previously numbered specials, this argument is
passed as zero and ignored, but there's a new main special code for
SSH host key cross-certification, in which the integer argument is an
index into the backend's list of available keys. TS_LOCALSTART is now
a thing of the past: if I need any other open-ended sets of specials
in future, I can add a new top-level code with a nicely separated
space of arguments.
While I'm at it, I've removed the legacy misnomer 'Telnet_Special'
from the code completely; the enum is now SessionSpecialCode, the
struct containing full details of a menu entry is SessionSpecial, and
the enum values now start SS_ rather than TS_.
Originally, it controlled whether ssh.c should send terminal messages
(such as login and password prompts) to terminal.c or to stderr. But
we've had the from_backend() abstraction for ages now, which even has
an existing flag to indicate that the data is stderr rather than
stdout data; applications which set FLAG_STDERR are precisely those
that link against uxcons or wincons, so from_backend will do the
expected thing anyway with data sent to it with that flag set. So
there's no reason ssh.c can't just unconditionally pass everything
through that, and remove the special case.
FLAG_STDERR was also used by winproxy and uxproxy to decide whether to
capture standard error from a local proxy command, or whether to let
the proxy command send its diagnostics directly to the usual standard
error. On reflection, I think it's better to unconditionally capture
the proxy's stderr, for three reasons. Firstly, it means proxy
diagnostics are prefixed with 'proxy:' so that you can tell them apart
from any other stderr spew (which used to be particularly confusing if
both the main application and the proxy command were instances of
Plink); secondly, proxy diagnostics are now reliably copied to packet
log files along with all the other Event Log entries, even by
command-line tools; and thirdly, this means the option to suppress
proxy command diagnostics after the main session starts will actually
_work_ in the command-line tools, which it previously couldn't.
A more minor structure change is that copying of Event Log messages to
stderr in verbose mode is now done by wincons/uxcons, instead of
centrally in logging.c (since logging.c can now no longer check
FLAG_STDERR to decide whether to do it). The total amount of code to
do this is considerably smaller than the defensive-sounding comment in
logevent.c explaining why I did it the other way instead :-)
Now there's a centralised routine in misc.c to do the sanitisation,
which copies data on to an outgoing bufchain. This allows me to remove
from_backend_untrusted() completely from the frontend API, simplifying
code in several places.
Two use cases for untrusted-terminal-data sanitisation were in the
terminal.c prompts handler, and in the collection of SSH-2 userauth
banners. Both of those were writing output to a bufchain anyway, so
it was very convenient to just replace a bufchain_add with
sanitise_term_data and then not have to worry about it again.
There was also a simplistic sanitiser in uxcons.c, which I've now
replaced with a call to the good one - and in wincons.c there was a
FIXME saying I ought to get round to that, which now I have!
Most of these were 'void *' because they weren't even reliably a
structure type underneath - the per-OS storage systems would directly
cast read/write/enum settings handles to and from random things like
FILE *, Unix DIR *, or Windows HKEY. So I've wrapped them in tiny
structs for the sake of having a sensible structure tag visible
elsewhere in the code.
This is another major source of unexplained 'void *' parameters
throughout the code.
In particular, the currently unused testback.c actually gave the wrong
pointer type to its internal store of the frontend handle - it cast
the input void * to a Terminal *, from which it got implicitly cast
back again when calling from_backend, and nobody noticed. Now it uses
the right type internally as well as externally.
Nearly every part of the code that ever handles a full backend
structure has historically done it using a pair of pointer variables,
one pointing at a constant struct full of function pointers, and the
other pointing to a 'void *' state object that's passed to each of
those.
While I'm modernising the rest of the code, this seems like a good
time to turn that into the same more or less type-safe and less
cumbersome system as I'm using for other parts of the code, such as
Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure
contains a vtable pointer, and a system of macro wrappers handles
dispatching through that vtable.
Same principle again - the more of these structures have globally
visible tags (even if the structure contents are still opaque in most
places), the fewer of them I can mistake for each other.
That's one fewer anonymous 'void *' which might be accidentally
confused with some other pointer type if I misremember the order of
function arguments.
While I'm here, I've made its pointer-nature explicit - that is,
'Ldisc' is now a typedef for the structure type itself rather than a
pointer to it. A stylistic change only, but it feels more natural to
me these days for a thing you're going to eventually pass to a 'free'
function.
This commit adds the new ids and fingerprints in the keys appendix of
the manual, and moves the old ones down into the historic-keys
section. I've tweaked a few pieces of wording for ongoing use, so that
they don't imply a specific number of past key rollovers.
The -pgpfp option in all the tools now shows the new Master Key
fingerprint and the previous (2015) one. I've adjusted all the uses of
the #defines in putty.h so that future rollovers should only have to
modify the #defines themselves.
Most importantly, sign.sh bakes in the ids of the current release and
snapshot keys, so that snapshots will automatically be signed with the
new snapshot key and the -r option will invoke the new release key.
Like the corresponding rewrite of conf serialisation, this affects not
just conf_deserialise itself but also the per-platform filename and
fontspec deserialisers.
This is a cleanup I started to notice a need for during the BinarySink
work. It removes a lot of faffing about casting things to char * or
unsigned char * so that some API will accept them, even though lots of
such APIs really take a plain 'block of raw binary data' argument and
don't care what C thinks the signedness of that data might be - they
may well reinterpret it back and forth internally.
So I've tried to arrange for all the function call APIs that ought to
have a void * (or const void *) to have one, and those that need to do
pointer arithmetic on the parameter internally can cast it back at the
top of the function. That saves endless ad-hoc casts at the call
sites.
There was a time, back when the USA was more vigorously against
cryptography, when we toyed with the idea of having a version of PuTTY
that outsourced its cryptographic primitives to the Microsoft optional
encryption API, which would effectively create a tool that acted like
PuTTY proper on a system with that API installed, but automatically
degraded to being PuTTYtel on a system without, and meanwhile (so went
the theory) it could be moved freely across national borders with
crypto restrictions, because it didn't _contain_ any of the actual
crypto.
I don't recall that we ever got it working at all. And certainly the
vestiges of it here and there in the current code are completely
unworkable - they refer to an 'mscrypto.c' that doesn't even exist,
and the ifdefs in the definitions of structures like RSAKey and
MD5Context are not matched by any corresponding ifdefs in the code. So
I ought to have got round to removing it long ago, in order to avoid
misleading anyone.
This simplifies the client code both in ssh.c and in the client side
of Pageant.
I've cheated a tiny bit by preparing agent requests in a strbuf that
has space reserved at the front for the packet frame, which makes life
easier for the code that sends them off.
Now instead of iterating through conf twice in separate functions,
once to count up the size of the serialised data and once to write it
out, I just go through once and dump it all in a strbuf.
(Of course, I could still do a two-pass count-then-allocate approach
easily enough in this system; nothing would stop me writing a
BinarySink implementation that didn't actually store any data and just
counted its size, and then I could choose at each call site whether I
preferred to do it that way.)
This centralises a few things that multiple header files were
previously defining, and were protecting against each other's
redefinition with ifdefs - small things like structs and typedefs. Now
all those things are in a defs.h which is by definition safe to
include _first_ (out of all the codebase-local headers) and only need
to be defined once.
This seems to be a knock-on effect of my recent reworking of the SSH
code to be based around queues and callbacks. The loop iteration
function in uxsftp.c (ssh_sftp_do_select) would keep going round its
select loop until something had happened on one of its file
descriptors, and then return to the caller in the assumption that the
resulting data might have triggered whatever condition the caller was
waiting for - and if not, then the caller checks, finds nothing
interesting has happened, and resumes looping with no harm done.
But now, when something happens on an fd, it doesn't _synchronously_
trigger the follow-up condition PSFTP was waiting for (which, at
startup time, happens to be back->sendok() starting to return TRUE).
Instead, it schedules a callback, which will schedule a callback,
which ... ends up setting that flag. But by that time, the loop
function has already returned, the caller has found nothing
interesting and resumed looping, and _now_ the interesting thing
happens but it's too late because ssh_sftp_do_select will wait until
the next file descriptor activity before it next returns.
Solution: give run_toplevel_callbacks a return value which says
whether it's actually done something, and if so, return immediately in
case that was the droid the caller was looking for. As it were.
NFC for the moment, because the bufchain is always specially
constructed to hold exactly the same data that would have been passed
in to the function as a (pointer,length) pair. But this API change
allows get_userpass_input to express the idea that it consumed some
but not all of the data in the bufchain, which means that later on
I'll be able to point the same function at a longer-lived bufchain
containing the full stream of keyboard input and avoid dropping
keystrokes that arrive too quickly after the end of an interactive
password prompt.
This is a set of convenience wrappers around the existing toplevel
callback function, which arranges to avoid scheduling a second call to
a callback function if one is already in the queue.
Just like the last few commits, this is a piece of infrastructure that
nothing is yet using. But it will.
NFC: this is a preliminary refactoring, intended to make my life
easier when I start changing around the APIs used to pass user
keyboard input around. The fewer functions even _have_ such an API,
the less I'll have to do at that point.
Thanks to Jiri Kaspar for sending this patch (apart from the new docs
section, which is in my own words), which implements a feature we've
had as a wishlist item ('utf8-plus-vt100') for a long time.
I was actually surprised it was possible to implement it in so few
lines of code! I'd forgotten, or possibly never noticed in the first
place, that even in UTF-8 mode PuTTY not only accepts but still
_processes_ all the ISO 2022 control sequences and shift characters,
and keeps running track of all the same state in term->cset and
term->cset_attrs that it tracks in IS0-2022-enabled modes. It's just
that in UTF-8 mode, at the very last minute when a character+attribute
pair is about to be written into the terminal's character buffer, it
deliberately ignores the contents of those variables.
So all that was needed was a new flag checked at that last moment
which causes it not quite to ignore them after all, and bingo,
utf8-plus-vt100 is supported. And it works no matter which ISO 2022
sequences you're using; whether you're using ESC ( 0 to select the
line drawing set directly into GL and ESC ( B to get back when you're
done, or whether you send a preliminary ESC ( B ESC ) 0 to get GL/GR
to be ASCII and line drawing respectively so you can use SI and SO as
one-byte mode switches thereafter, both work just as well.
This implementation strategy has a couple of consequences, which I
don't think matter very much one way or the other but I document them
just in case they turn out to be important later:
- if an application expecting this mode has already filled your
terminal window with lqqqqqqqqk, then enabling this mode in Change
Settings won't retroactively turn them into the line drawing
characters you wanted, because no memory is preserved in the screen
buffer of what the ISO 2022 state was when they were printed. So
the application still has to do a screen refresh.
- on the other hand, if you already sent the ESC ( 0 or whatever to
put the terminal _into_ line drawing mode, and then you turn on
this mode in Change Settings, you _will_ still be in line drawing
mode, because the system _does_ remember your current ISO 2022
state at all times, whether it's currently applying it to output
printing characters or not.
Commit d515e4f1a went through a lot of very different shapes before it
was finally pushed. In some of them, GSS kex had its own value in the
kex enumeration, but it was used in ssh.c but not in config.c
(because, as in the final version, it wasn't configured by the same
drag-list system as the rest of them). So we had to distinguish the
set of key exchange ids known to the program as a whole from the set
controllable in the configuration.
In the final version, GSS kex ended up even more separated from the
kex enumeration than that: the enum value KEX_GSS_SHA1_K5 isn't used
at all. Instead, GSS key exchange appears in the list at the point of
translation from the list of enum values into the list of pointers to
data structures full of kex methods.
But after all the changes, everyone involved forgot to revert the part
of the patch which split KEX_MAX in two and introduced the pointless
value KEX_GSS_SHA1_K5! Better late than never: I'm reverting it now,
to avoid confusion, and because I don't have any reason to think the
distinction will be useful for any other purpose.
The former has advantages in terms of keeping Kerberos credentials up
to date, but it also does something sufficiently weird to the usual
SSH host key system that I think it's worth making sure users have a
means of turning it off separately from the less intrusive GSS
userauth.
This is a heavily edited (by me) version of a patch originally due to
Nico Williams and Viktor Dukhovni. Their comments:
* Don't delegate credentials when rekeying unless there's a new TGT
or the old service ticket is nearly expired.
* Check for the above conditions more frequently (every two minutes
by default) and rekey when we would delegate credentials.
* Do not rekey with very short service ticket lifetimes; some GSSAPI
libraries may lose the race to use an almost expired ticket. Adjust
the timing of rekey checks to try to avoid this possibility.
My further comments:
The most interesting thing about this patch to me is that the use of
GSS key exchange causes a switch over to a completely different model
of what host keys are for. This comes from RFC 4462 section 2.1: the
basic idea is that when your session is mostly bidirectionally
authenticated by the GSSAPI exchanges happening in initial kex and
every rekey, host keys become more or less vestigial, and their
remaining purpose is to allow a rekey to happen if the requirements of
the SSH protocol demand it at an awkward moment when the GSS
credentials are not currently available (e.g. timed out and haven't
been renewed yet). As such, there's no need for host keys to be
_permanent_ or to be a reliable identifier of a particular host, and
RFC 4462 allows for the possibility that they might be purely
transient and only for this kind of emergency fallback purpose.
Therefore, once PuTTY has done a GSS key exchange, it disconnects
itself completely from the permanent host key cache functions in
storage.h, and instead switches to a _transient_ host key cache stored
in memory with the lifetime of just that SSH session. That cache is
populated with keys received from the server as a side effect of GSS
kex (via the optional SSH2_MSG_KEXGSS_HOSTKEY message), and used if
later in the session we have to fall back to a non-GSS key exchange.
However, in practice servers we've tested against do not send a host
key in that way, so we also have a fallback method of populating the
transient cache by triggering an immediate non-GSS rekey straight
after userauth (reusing the code path we also use to turn on OpenSSH
delayed encryption without the race condition).
This is a preliminary refactoring for an upcoming change which will
need to affect every use of schedule_timer to wait for the next rekey:
those calls to schedule_timer are now centralised into a function that
does an organised piece of thinking about when the next timer should
be.
A side effect of this change is that the translation from
CONF_ssh_rekey_time to an actual tick count is now better proofed
against integer overflow (just in case the user entered a completely
silly value).
This is a mild security measure against malicious clipboard-writing.
It's only mild, because of course there are situations in which even a
sanitised paste could be successfully malicious (imagine someone
managing to write the traditional 'rm -rf' command into your clipboard
when you were going to paste to a shell prompt); but it at least
allows pasting into typical text editors without also allowing the
control sequence that exits the editor UI and returns to the shell
prompt.
This is a configurable option, because there's no well defined line to
be drawn between acceptable and unacceptable pastes, and it's very
plausible that users will have sensible use cases for pasting things
outside the list of permitted characters, or cases in which they know
they trust the clipboard-writer. I for one certainly find it useful on
occasion to deliberately construct a paste containing control
sequences that automate a terminal-based UI.
While I'm at it, when bracketed paste mode is enabled, we also prevent
pasting of data that includes the 'end bracketed paste' sequence
somewhere in the middle. I really _hope_ nobody was treating bracketed
paste mode as a key part of their security boundary, but then again, I
also can't imagine that anyone had an actually sensible use case for
deliberately making a bracketed paste be only partly bracketed, and
it's an easy change while I'm messing about in this area anyway.
On all platforms, you can now configure which clipboard the mouse
pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which
Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are:
- nothing at all
- a clipboard which is implicitly written by the act of mouse
selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else)
- the standard clipboard written by explicit copy/paste UI actions
(CLIPBOARD on X, the unique system clipboard elsewhere).
Also, you can control whether selecting text with the mouse _also_
writes to the explicitly accessed clipboard.
The wording of the various messages changes between platforms, but the
basic UI shape is the same everywhere.
This stores the last text selected in _this_ terminal, regardless of
whether any other application has since taken back whatever system
clipboard we also copied it to. It's written unconditionally whenever
text is selected in terminal.c.
The main purpose of this will be that it's also the place that you can
go and find the data you need to write to a system clipboard in
response to an explicit Copy operation. But it can also act as a data
source for pastes in its own right, so you can use it to implement an
intra-window private extra clipboard if that's useful. (OS X Terminal
has one of those, so _someone_ at least seems to like the idea.)
This lays some groundwork for making PuTTY's cut and paste handling
more flexible in the area of which clipboard(s) it reads and writes,
if more than one is available on the system.
I've introduced a system of list macros which define an enumeration of
integer clipboard ids, some defined centrally in putty.h (at present
just a CLIP_NULL which never has any text in it, because that seems
like the sort of thing that will come in useful for configuring a
given copy or paste UI action to be ignored) and some defined per
platform. All the front end functions that copy and paste take a
clipboard id, and the Terminal structure is now configured at startup
to tell it which clipboard id it should paste from on a mouse click,
and which it should copy from on a selection.
However, I haven't actually added _real_ support for multiple X11
clipboards, in that the Unix front end supports a single CLIP_SYSTEM
regardless of whether it's in OS X or GTK mode. So this is currently a
NFC refactoring which does nothing but prepare the way for real
changes to come.
It's actually a function specific to the Windows front end, and has
been all along - but I've only just noticed that no other front end
either uses it or defines it.
Previously, both the Unix and Windows front ends would respond to a
paste action by retrieving data from the system clipboard, converting
it appropriately, _storing_ it in a persistent dynamic data block
inside the front end, and then calling term_do_paste(term), which in
turn would call back to the front end via get_clip() to retrieve the
current contents of that stored data block.
But, as far as I can tell, this was a completely pointless mechanism,
because after a data block was written into this storage area, it
would be immediately used for exactly one paste, and then never
accessed again until the next paste action caused it to be freed and
replaced with a new chunk of pasted data.
So why on earth was it stored persistently at all, and why that
callback mechanism from frontend to terminal back to frontend to
retrieve it for the actual paste action? I have no idea. This change
removes the entire system and replaces it with the completely obvious
alternative: the character-set-converted version of paste data is
allocated in a _local_ variable in the frontend paste functions,
passed directly to term_do_paste which now takes (buffer,length)
parameters, and freed immediately afterwards. get_clip() is gone.
This is another piece of long-overdue refactoring similar to the
recent commit e3796cb77. But where that one dealt with normalisation
of stuff already stored _in_ a Conf by whatever means (including, in
particular, handling a user typing 'username@host.name' into the
Hostname box of the GUI session dialog box), this one deals with
handling argv entries and putting them into the Conf.
This isn't exactly a pure no-functional-change-at-all refactoring. On
the other hand, it isn't a full-on cleanup that completely
rationalises all the user-visible behaviour as well as the code
structure. It's somewhere in between: I've preserved all the behaviour
quirks that I could imagine a reason for having intended, but taken
the opportunity to _not_ faithfully replicate anything I thought was
clearly just a bug.
So, for example, the following inconsistency is carefully preserved:
the command 'plink -load session nextword' treats 'nextword' as a host
name if the loaded session hasn't provided a hostname already, and
otherwise treats 'nextword' as the remote command to execute on the
already-specified remote host, but the same combination of arguments
to GUI PuTTY will _always_ treat 'nextword' as a hostname, overriding
a hostname (if any) in the saved session. That makes some sense to me
because of the different shapes of the overall command lines.
On the other hand, there are two behaviour changes I know of as a
result of this commit: a third argument to GUI PuTTY (after a hostname
and port) now provokes an error message instead of being silently
ignored, and in Plink, if you combine a -P option (specifying a port
number) with the historical comma-separated protocol selection prefix
on the hostname argument (which I'd completely forgotten even existed
until this piece of work), then the -P will now override the selected
protocol's default port number, whereas previously the default port
would win. For example, 'plink -P 12345 telnet,hostname' will now
connect via Telnet to port 12345 instead of to port 23.
There may be scope for removing or rethinking some of the command-
line syntax quirks in the wake of this change. If we do decide to do
anything like that, then hopefully having it all in one place will
make it easier to remove or change things consistently across the
tools.
A more or less identical piece of code to sanitise the CONF_host
string prior to session launch existed in Windows PuTTY and both
Windows and Unix Plink. It's long past time it was centralised.
While I'm here, I've added a couple of extra comments in the
centralised version, including one that - unfortunately - tries _but
fails_ to explain why a string of the form "host.name:1234" doesn't
get the suffix moved into CONF_port the way "user@host" moves the
prefix into CONF_username. Commit c1c1bc471 is the one I'm referring
to in the comment, and unfortunately it has an unexplained one-liner
log message from before I got into the habit of being usefully
verbose.
It's an incoherent concept! There should not be any such thing as an
error box that terminates the entire program but is not modal. If it's
bad enough to terminate the whole program, i.e. _all_ currently live
connections, then there's no point in permitting progress to continue
in windows other than the affected one, because all windows are
affected anyway.
So all previous uses of fatalbox() have become modalfatalbox(), except
those which looked to me as if they shouldn't have been fatal in the
first place, e.g. lingering pieces of error handling in winnet.c which
ought to have had the severity of 'give up on this particular Socket
and close it' rather than 'give up on the ENTIRE UNIVERSE'.
This is used when you're about to destroy an object that is
(potentially) the context parameter for some still-pending toplevel
callback. It causes callbacks.c to go through its pending list and
delete any callback records referring to that context parameter, so
that when you destroy the object those callbacks aren't still waiting
to cause stale-pointer dereferences.
I've done this on a 'where possible' basis: in Windows paletted mode
(in case anyone is still using an old enough graphics card to need
that!) I simply haven't bothered, and will completely ignore the dim
flag.
Markus Gans points out that some applications which (not at all
unreasonably) don't trust $TERM to tell them the full capabilities of
their terminal will use the sequence "OSC 4 ; nn ; ? BEL" to ask for
the colour-palette value in position nn, and they may not particularly
care _what_ the results are but they will use them to decide whether
the right number of colour palette entries even exist.
I know some users don't like any colour _at all_, and we have a
separate option to turn off xterm-style 256-colour sequences, so it
seems remiss not to have an option to disable true colour as well.
This is a heavily rewritten version of a patch originally by Lorenz
Diener; it was tidied up somewhat by Christian Brabandt, and then
tidied up more by me. The basic idea is to add to the termchar
structure a pair of small structs encoding 24-bit RGB values, each
with a flag indicating whether it's turned on; if it is, it overrides
any other specification of fg or bg colour for that character cell.
I've added a test line to colours.txt containing a few example colours
from /usr/share/X11/rgb.txt. In fact it makes quite a good demo to run
the whole of rgb.txt through this treatment, with a command such as
perl -pe 's!^\s*(\d+)\s+(\d+)\s+(\d+).*$!\e[38;2;$1;$2;$3m$&\e[m!' rgb.txt
It's a function that exists on all platforms, not just on Unix - it's
used in ldisc.c - so it shouldn't have been declared only in unix.h.
Score another for clang's warnings.
Now, instead of returning a boolean indicating whether the query has
completed or is still pending, agent_query() returns NULL to indicate
that the query _has_ completed, and if it hasn't, it returns a pointer
to a context structure representing the pending query, so that the
latter can be used to cancel the query if (for example) you later
decide you need to free the thing its callback was using as a context.
This should fix a potential race-condition segfault if you overload an
agent forwarding channel and then close it abruptly. (Which nobody
will be doing for sensible purposes, of course! But I ran across this
while stress-testing other aspects of agent forwarding.)
I can't believe this codebase is around 20 years old and has had
multiple giant const-fixing patches, and yet there are _still_ things
that should have been const for years and aren't.
The UI now only has "1" and "2" options for SSH protocol version, which
behave like the old "1 only" and "2 only" options; old
SSH-N-with-fallback settings are interpreted as SSH-N-only.
This prevents any attempt at a protocol downgrade attack.
Most users should see no difference; those poor souls who still have to
work with SSH-1 equipment now have to explicitly opt in.
A compiler warning drew my attention to the fact that 'next' in
pinger_schedule() was an int, not the unsigned long it should have
been. And looking at the code that handles it, it was also taking no
care with integer wraparound when checking whether an existing
scheduled ping should be moved forward.
So now I do something a bit more robust, by remembering what time it
_was_ when we set pinger->next, and checking if the new time value
falls in the interval between those two times.
E.g. you might pass '--random-device=/dev/urandom'.
Mostly because I got sick of waiting for /dev/random to finish
blocking while I was trying to generate throwaway keys for testing bug
fixes in cmdgen itself. But it might also be useful on systems that
call their random device by a different name that we haven't
encountered.
(Since cmdgen also reads the saved PuTTY random seed file, setting
this option to /dev/zero will not render key generation deterministic.
It's tempting to provide _some_ way to do that, for testing purposes
and clearly marked as dangerous of course, but I think it would take
more faff than this.)
If you're connecting to a new server and it _only_ provides host key
types you've configured to be below the warning threshold, it's OK to
give the standard askalg() message. But if you've newly demoted a host
key type and now reconnect to some server for which that type was the
best key you had cached, the askalg() wording isn't really appropriate
(it's not that the key we've settled on is the first type _supported
by the server_, it's that it's the first type _cached by us_), and
also it's potentially helpful to list the better algorithms so that
the user can pick one to cross-certify.
Now we actually have enough of them to worry about, and especially
since some of the types we support are approved by organisations that
people might make their own decisions about whether to trust, it seems
worth having a config list for host keys the same way we have one for
kex types and ciphers.
To make room for this, I've created an SSH > Host Keys config panel,
and moved the existing host-key related configuration (manually
specified fingerprints) into there from the Kex panel.
It has three settings: on, off, and 'only until session starts'. The
idea of the last one is that if you use something like 'ssh -v' as
your proxy command, you probably wanted to see the initial SSH
connection-setup messages while you were waiting to see if the
connection would be set up successfully at all, but probably _didn't_
want a slew of diagnostics from rekeys disrupting your terminal in
mid-emacs once the session had got properly under way.
Default is off, to avoid startling people used to the old behaviour. I
wonder if I should have set it more aggressively, though.
This saves the need to fork and exec "cat", which should speed things
up. It also ensures that the network output goes to /dev/null, which
should avoid problems with blocking when writing to a full pipe.
A Plink invocation of the form 'plink -shareexists <session>' tests
for a currently live connection-sharing upstream for the session in
question. <session> can be any syntax you'd use with Plink to make the
actual connection (a host/port number, a bare saved session name,
-load, whatever).
I envisage this being useful for things like adaptive proxying - e.g.
if you want to connect to host A which you can't route to directly,
and you might already have a connection to either of hosts B or C
which are viable proxies, then you could write a proxy shell script
which checks whether you already have an upstream for B or C and goes
via whichever one is currently active.
Testing for the upstream's existence has to be done by actually
connecting to its socket, because on Unix the mere existence of a
Unix-domain socket file doesn't guarantee that there's a process
listening to it. So we make a test connection, and then immediately
disconnect; hence, that shows up in the upstream's event log.
On Windows, colons are illegal in filenames, because they're part of
the path syntax. But colons can appear in automatically constructed
log file names, if an IPv6 address is expanded from the &H placeholder.
Now we coerce any such illegal characters to '.', which is a bit of a
bodge but should at least cause a log file to be generated.
Personally I like using Command as the Esc-prefixing Meta key in
terminal sessions, because it occupies the same physical keyboard
position as the Alt key that I'm used to using on non-Macs. OS X
Terminal uses Option for that purpose (freeing up Command for the
conventional Mac keyboard shortcuts, of course), so I anticipate
differences of opinion.
Hence, here's a pair of OSX-specific config options which permit a
user to set either, or neither, or both of those modifier keys to
function as the terminal Meta key.
The general plan is that if PuTTY knows a host key for a server, it
should preferentially ask for the same type of key so that there's some
chance of actually getting the same key again. This should mean that
when a server (or PuTTY) adds a new host key type, PuTTY doesn't
gratuitously switch to that key type and then warn the user about an
unrecognised key.
Having found a lot of unfixed constness issues in recent development,
I thought perhaps it was time to get proactive, so I compiled the
whole codebase with -Wwrite-strings. That turned up a huge load of
const problems, which I've fixed in this commit: the Unix build now
goes cleanly through with -Wwrite-strings, and the Windows build is as
close as I could get it (there are some lingering issues due to
occasional Windows API functions like AcquireCredentialsHandle not
having the right constness).
Notable fallout beyond the purely mechanical changing of types:
- the stuff saved by cmdline_save_param() is now explicitly
dupstr()ed, and freed in cmdline_run_saved.
- I couldn't make both string arguments to cmdline_process_param()
const, because it intentionally writes to one of them in the case
where it's the argument to -pw (in the vain hope of being at least
slightly friendly to 'ps'), so elsewhere I had to temporarily
dupstr() something for the sake of passing it to that function
- I had to invent a silly parallel version of const_cmp() so I could
pass const string literals in to lookup functions.
- stripslashes() in pscp.c and psftp.c has the annoying strchr nature
All the name strings in ssh_cipher, ssh_mac, ssh_hash, ssh_signkey
point to compile-time string literals, hence should obviously be const
char *.
Most of these const-correctness patches are just a mechanical job of
adding a 'const' in the one place you need it right now, and then
chasing the implications through the code adding further consts until
it compiles. But this one has actually shown up a bug: the 'algorithm'
output parameter in ssh2_userkey_loadpub was sometimes returning a
pointer to a string literal, and sometimes a pointer to dynamically
allocated memory, so callers were forced to either sometimes leak
memory or sometimes free a bad thing. Now it's consistently
dynamically allocated, and should be freed everywhere too.
PuTTY now uses the updated version of Diffie-Hellman group exchange,
except for a few old OpenSSH versions which Darren Tucker reports only
support the old version.
FIXME: this needs further work because the Bugs config panel has now
overflowed.
I'm not actually sure why we've always had back ends notify ldisc of
changes to echo/edit settings by giving ldisc_send(ldisc,NULL,0,0) a
special meaning, instead of by having a separate dedicated notify
function with its own prototype and parameter set. Coverity's recent
observation that the two kinds of call don't even have the same
requirements on the ldisc (particularly, whether ldisc->term can be
NULL) makes me realise that it's really high time I separated the two
conceptually different operations into actually different functions.
While I'm here, I've renamed the confusing ldisc_update() function
which that special operation ends up feeding to, because it's not
actually a function applying to an ldisc - it applies to a front end.
So ldisc_send(ldisc,NULL,0,0) is now ldisc_echoedit_update(ldisc), and
that in turn figures out the current echo/edit settings before passing
them on to frontend_echoedit_update(). I think that should be clearer.
This provides support for ECDSA public keys, for both hosts and users,
and also ECDH key exchange. Supported curves are currently just the
three NIST curves required by RFC 5656.
This option is available from the command line as '-hostkey', and is
also configurable through the GUI. When enabled, it completely
replaces all of the automated host key management: the server's host
key will be checked against the manually configured list, and the
connection will be allowed or disconnected on that basis, and the host
key store in the registry will not be either consulted or updated.
The main aim is to provide a means of automatically running Plink,
PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER
isn't available to have stored the right host key in. But it also
permits you to specify a list of multiple host keys, which means a
second use case for the same mechanism will probably be round-robin
DNS names that select one of several servers with different host keys.
Host keys can be specified as the standard MD5 fingerprint or as an
SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is
more unwieldy, especially with Windows command-line length limits, but
provides a means of specifying the _whole_ public key in case you
don't trust MD5. I haven't bothered to provide an analogous mechanism
for SSH-1, on the basis that anyone worrying about MD5 should have
stopped using SSH-1 already!)
[originally from svn r10220]
We now expect that after the server has sent us CHANNEL_CLOSE, we
should not expect to see any replies to our outstanding channel
requests, and conversely after we have sent CHANNEL_CLOSE we avoid
sending any reply to channel requests from the server. This was the
consensus among implementors discussing the problem on ietf-ssh in
April 2014.
To cope with current OpenSSH's (and perhaps other servers we don't
know about yet) willingness to send request replies after
CHANNEL_CLOSE, I introduce a bug-compatibility flag which is detected
for every OpenSSH version up to and including the current 6.6 - but
not beyond, since https://bugzilla.mindrot.org/show_bug.cgi?id=1818
promises that 6.7 will also implement the new consensus behaviour.
[originally from svn r10200]
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
This change attempts to reinstate as a universal property something
which was sporadically true of the ad-hockery that came before
toplevel callbacks: that if there's a _very long_ queue of things to
be done through the callback mechanism, the doing of them will be
interleaved with re-checks of other event sources, which might (e.g.)
cause a flag to be set which makes the next callback decide not to do
anything after all.
[originally from svn r10040]
I've removed the ad-hoc front-end bodgery in the Windows and GTK ports
to arrange for term_paste to be called at the right moments, and
instead, terminal.c itself deals with knowing when to send the next
chunk of pasted data using a combination of timers and the new
top-level callback mechanism.
As a happy side effect, it's now all in one place so I can actually
understand what it's doing! It turns out that what all that confusing
code was up to is: send a line of pasted data, and delay sending the
next line until either a CR or LF is returned from the server
(typically indicating that the pasted text has been received and
echoed) or 450ms elapse, whichever comes first.
[originally from svn r10020]
This is a little like schedule_timer, in that the callback you provide
will be run from the top-level message loop of whatever application
you're in; but unlike the timer mechanism, it will happen
_immediately_.
The aim is to provide a general way to avoid re-entrance of code, in
cases where just _doing_ the thing you want done is liable to trigger
a confusing recursive call to the function in which you came to the
decision to do it; instead, you just request a top-level callback at
the message loop's earliest convenience, and do it then.
[originally from svn r10019]
that the user really ought to know but that are not actually fatal to
continued operation of PuTTY or a single network connection.
[originally from svn r9932]
First, make absolute times unsigned. This means that it's safe to
depend on their overflow behaviour (which is undefined for signed
integers). This requires a little extra care in handling comparisons,
but I think I've correctly adjusted them all.
Second, functions registered with schedule_timer() are guaranteed to be
called with precisely the time that was returned by schedule_timer().
Thus, it's only necessary to check these values for equality rather than
doing risky range checks, so do that.
The timing code still does lots that's undefined, unnecessary, or just
wrong, but this is a good start.
[originally from svn r9667]
winadj@putty.projects.tartarus.org request. Not currently enabled
automatically, but should be usable as a manual workaround.
[originally from svn r9592]
zero but does it in such a way that over-clever compilers hopefully
won't helpfully optimise the call away if you do it just before
freeing something or letting it go out of scope. Use this for
(hopefully) every memset whose job is to destroy sensitive data that
might otherwise be left lying around in the process's memory.
[originally from svn r9586]
UTF-16 support. High Unicode characters in the terminal are now
converted back into surrogates during copy and draw operations, and
the Windows drawing code takes account of that when splitting up the
UTF-16 string for display. Meanwhile, accidental uses of wchar_t have
been replaced with 32-bit integers in parts of the cross-platform code
which were expecting not to have to deal with UTF-16.
[originally from svn r9409]
allocated type.
The main reason for this is to stop it from taking up a fixed large
amount of space in every 'struct value' subunion in conf.c, although
that makes little difference so far because Filename is still doing
the same thing (and is therefore next on my list). However, the
removal of its arbitrary length limit is not to be sneezed at.
[originally from svn r9314]
data channels. Should comprehensively fix 'half-closed', in principle,
though it's a big and complicated change and so there's a good chance
I've made at least one mistake somewhere.
All connections should now be rigorous about propagating end-of-file
(or end-of-data-stream, or socket shutdown, or whatever) independently
in both directions, except in frontends with no mechanism for sending
explicit EOF (e.g. interactive terminal windows) or backends which are
basically always used for interactive sessions so it's unlikely that
an application would be depending on independent EOF (telnet, rlogin).
EOF should now never accidentally be sent while there's still buffered
data to go out before it. (May help fix 'portfwd-corrupt', and also I
noticed recently that the ssh main session channel can accidentally
have MSG_EOF sent before the output bufchain is clear, leading to
embarrassment when it subsequently does send the output).
[originally from svn r9279]
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
information about where to put items that aren't mentioned in the
saved configuration. So far the only nontrivial use I've made of this
facility is to default to placing KEX_RSA just above KEX_WARN in the
absence of any other information, which should fix
'ssh2-rsa-kex-pref'.
While I'm here I've rewritten wprefs() on general principles to remove
the needless length limit, since I was touching it anyway. The length
limit is still in gprefs (but I've lengthened it just in case).
[originally from svn r9181]
in saved sessions, so that a programmable window manager can
distinguish different PuTTYs/pterms on startup and assign them
different window management properties.
[originally from svn r9078]
icon, even if the program isn't running at the time, to be presented
with an application-defined collection of helpful links). The current
jump list is updated every time a saved session is loaded, and shows
the last few launchable saved sessions (i.e. not those like Default
Settings) that were loaded. Also, if Pageant or PuTTYgen or both is in
the same directory as the PuTTY binary, the jump list will present
links to launch those too.
Based on a patch sent last year by Daniel B. Roy, though it's barely
recognisable any more...
[originally from svn r9046]
are now loaded from standard locations (system32 for SSPI, the
registry-stored MIT KfW install location for KfW) rather than using
the risky default DLL search path; I've therefore also added an
option to manually specify a GSS DLL we haven't heard of (which
should in principle Just Work provided it supports proper GSS-API as
specified in the RFC). The same option exists on Unix too, because
it seemed like too useful an idea to reserve to Windows. In
addition, GSSAPI is now documented, and also (unfortunately) its GUI
configuration has been moved out into a sub-subpanel on the grounds
that it was too big to fit in Auth.
[originally from svn r9003]
reorganises the GSSAPI support so that it handles alternative
implementations of the GSS-API. In particular, this means PuTTY can
now talk to MIT Kerberos for Windows instead of being limited to
SSPI. I don't know for sure whether further tweaking will be needed
(to the UI, most likely, or to automatic selection of credentials),
but testing reports suggest it's now at least worth committing to
trunk to get it more widely tested.
[originally from svn r8952]
today reported an SSH2_MSG_UNIMPLEMENTED from a Cisco router which
looks as if it was triggered by SSH2_MSG_IGNORE, so I'm
experimentally putting this flag in. Currently must be manually
enabled, though if it turns out to solve the user's problem then
I'll probably add at least one version string...
[Edited commit message: actually, I also committed in error a piece
of experimental code as part of this checkin. Serve me right for not
running 'svn diff' first.]
[originally from svn r8926]
function in terminal.c, and replace the cloned-and-hacked handling
code in all our front ends with calls to that.
This was intended for code cleanliness, but a side effect is to make
the GTK arrow-key handling support disabling of application cursor
key mode in the Features panel. Previously that checkbox was
accidentally ignored, and nobody seems to have noticed before!
[originally from svn r8896]
if we have no better ideas, with UI shamelessly stolen from Quest PuTTY.
Off by default, which effectively reverts the change to using the local
username by default that came in with GSSAPI support in r8138. Anyone wanting
seamless single sign-on will need to set the new option. (The previous
default behaviour was getting in the way in ad-hoc scenarios.)
Note that the PSCP and Unix-Plink behaviour of using the local username by
default have remained unchanged throughout; they are not affected by the new
option. Not sure if that's the Right Thing.
[originally from svn r8324]
[r8138 == de5dd9d65c]
strings more rigorously, and then we look up the local X authority
data in .Xauthority _ourself_ rather than delegating to an external
xauth program. This is (negligibly) more efficient on Unix, assuming
I haven't got it wrong in some subtle way, but its major benefit is
that we can now support X authority lookups on Windows as well
provided the user points us at an appropriate X authority file in
the standard format. A new Windows-specific config option has been
added for this purpose.
[originally from svn r8305]
both directions. We had a bug report yesterday about a Cisco router
sending SSH2_MSG_UNIMPLEMENTED and it wasn't clear for which packet;
logging the sequence numbers should make such problems much easier
to diagnose.
(In fact this logging fix wouldn't have helped in yesterday's case,
because the router also didn't bother to fill in the sequence number
field in the SSH2_MSG_UNIMPLEMENTED packet! This is a precautionary
measure against the next one of these problems.)
[originally from svn r8295]
no actual prompts, we weren't displaying the former, which was wrong. We
should now (although I haven't found a server to test it against).
[originally from svn r8172]
to manually tweak the host name and port number under which the SSH
host key is read and written.
I've put it in the cross-platform Connection panel. Partly under the
flimsy pretext that other backends _can_ use it if they so wish (and
in fact it overrides the host name for title-bar purposes in all
network backends, though it has no other effect in anything but
SSH); but mostly because the SSH panel was too full already :-)
[originally from svn r8033]
advertise so that the server can't exceed our maximum packet size.
Enable it for "1.36_sshlib GlobalSCAPE" which apparently sends oversize
packets otherwise.
[originally from svn r7804]
channel, arrange to set the SSH-2 window size to something very
large. This prevents the connection stalling when the window fills
up, and means that PSCP receives data _much_ faster.
[originally from svn r7672]
Should be no significant change in behaviour.
(Well, entering usernames containing commas on Plink's command line will be
a little harder now.)
[originally from svn r7628]
launchable session without getting confused by it, we can relax the
restriction on storing a host name in DS, which has attracted a
steady stream of complaints over the past six or seven years.
[originally from svn r7266]
We now have an option where a remote window title query returns a well-formed
response containing the empty string. This should keep stop any server-side
application that was expecting a response from hanging, while not permitting
the response to be influenced by an attacker.
We also retain the ability to stay schtum. The existing checkbox has thus
grown into a set of radio buttons.
I've changed the default to the "empty string" response, even in the backward-
compatibility mode of loading old settings, which is a change in behaviour;
any users who want the old behaviour back will have to explicitly select it. I
think this is probably the Right Thing. (The only drawback I can think of is
that an attacker could still potentially use the relevant fixed strings for
mischief, but we already have other, similar reports.)
[originally from svn r7043]
easily manage, by adopting a hybrid approach to Unicode text
display. The old approach of simply calling ExtTextOutW provided
font linking without us having to lift a finger, but didn't do the
right thing when it came to bidirectional or Arabic-shaped text.
Arabeyes' replacement exact_textout() supported the latter, but
turned out to break the former (with no warning from the Windows API
documentation, so it's not their fault).
So now I've got a second wrapper layer called general_textout(),
which splits the input string into substrings based on bidi
character class. Any character liable to cause bidi or shaping
behaviour if fed straight to ExtTextOutW is instead fed through
Arabeyes' exact_textout(), but the rest is fed straight to
ExtTextOutW as it used to be.
The effect appears to be that font linking is restored for all
characters _except_ Arabic and other bidi scripts, which means in
particular that we are no longer in a state of regression over 0.57.
(0.57 would have done font linking on Arabic as well, but would also
have misbidied it, so we've merely exchanged one failure mode for
another slightly less harmful one in that situation.)
[originally from svn r6910]
in an SSH connection _in addition_ to the decrypted packets. This
will hopefully come in useful for debugging wire data corruption
issues: you can strace the server, enable this mode in the client,
and compare the sent and received data.
I'd _like_ to have this mode also log Diffie-Hellman private
exponents, session IDs, encryption and MAC keys, so that the
resulting log file could be used to independently verify the
correctness of all cryptographic operations performed by PuTTY.
However, I haven't been able to convince myself that the security
implications are acceptable. (It doesn't matter that this
information would permit an attacker to decrypt the session, because
the _already_ decrypted session is stored alongside it in the log
file. And I'm not planning, under any circumstances, to log users'
private keys. But gaining access to the log file while the session
was still running would permit an attacker to _hijack_ the session,
and that's the iffy bit.)
[originally from svn r6835]
there): `plink host -nc host2:port' causes the SSH connection's main
channel to be replaced with a direct-tcpip connection to the
specified destination. This feature is mainly designed for use as a
local proxy: setting your local proxy command to `plink %proxyhost
-nc %host:%port' lets you tunnel SSH over SSH with a minimum of
fuss. Works on all platforms.
[originally from svn r6823]
in place of making a network connection. This has involved a couple
of minor infrastructure changes:
- New dlg_label_change() function in the dialog.h interface, which
alters the label on a control. Only used, at present, to switch
the Host Name and Port boxes into Serial Line and Speed, which
means that any platform not implementing serial connections (i.e.
currently all but Windows) does not need to actually do anything
in this function. Yet.
- New small piece of infrastructure: cfg_launchable() determines
whether a Config structure describes a session ready to be
launched. This was previously determined by seeing if it had a
non-empty host name, but it has to check the serial line as well
so there's a centralised function for it. I haven't gone through
all front ends and arranged for this function to be used
everywhere it needs to be; so far I've only checked Windows.
- Similarly, cfg_dest() returns the destination of a connection
(host name or serial line) in a text format suitable for putting
into messages such as `Unable to connect to %s'.
[originally from svn r6815]
it's NULL. Since we already have one back end (uxpty) which doesn't
in fact talk to a network socket, and may well have more soon, I'm
replacing this TCP/IP-centric function with a nice neutral
`connected' function returning a boolean. Nothing else about its
semantics has currently changed.
[originally from svn r6810]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
basis for other terminal-involving applications: a stub
implementation of the printing interface, an additional function in
notiming.c, and also I've renamed the front-end function beep() to
do_beep() so as not to clash with beep() in lib[n]curses.
[originally from svn r6479]
abstracted out; replace loops structured around a single interaction
per loop with less tortuous code (fixes: `ki-multiprompt-crash',
`ssh1-bad-passphrase-crash'; makes `ssh2-password-expiry' and
`proxy-password-prompt' easier).
The new interaction abstraction has a lot of fields that are unused in
the current code (things like window captions); this is groundwork for
`gui-auth'. However, ssh.c still writes directly to stderr; that may
want to be fixed.
In the GUI apps, user interaction is moved to terminal.c. This should
make it easier to fix things like UTF-8 username entry, although I
haven't attempted to do so. Also, control character filtering can be
tailored to be appropriate for individual front-ends; so far I don't
promise anything other than not having made it any worse.
I've tried to test this fairly exhaustively (although Mac stuff is
untested, as usual). It all seems to basically work, but I bet there
are new bugs. (One I know about is that you can no longer make the
PuTTY window go away with a ^D at the password prompt; this should be
fixed.)
[originally from svn r6437]
[this svn revision also touched putty-wishlist]
there are servers which could in principle operate in this mode, although I
don't know if any do in practice. (Hence, I haven't been able to test it.)
[originally from svn r5748]
[this svn revision also touched putty-wishlist]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
that the global `sesslist' got out of sync with the saved-sessions submenu,
causing the latter to launch the wrong sessions.
Also, Change Settings wasn't getting a fresh session list, so if the set of
sessions had changed since session startup it wouldn't reflect that (at least
until a session was saved). Fixed (on all platforms).
Therefore, since the global sesslist didn't seem to be useful, I've got rid
of it; config.c creates one as needed, as do the frontends. (Not tried
compiling Mac changes.)
Also, we now build the saved-sessions submenu on demand on Windows and Unix.
(This should probably also be done on the Mac.)
[originally from svn r5609]
<http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c>.
This is identified both internally and in HTTP headers as 2003-05-20,
for Unicode 4.0.
Only changes from upstream are to make mk_wcwidth_cjk() non-static and to
#include "putty.h" for prototypes.
The status of some code points has changed; see the wishlist item. We've
had some feedback from the CJK and Arabic communities that upgrading is
probably the right thing to do.
[originally from svn r5547]
[this svn revision also touched putty-wishlist]
* All the PuTTY tools for Windows and Unix now contain the fingerprints of
the Master Keys. The method for accessing them is crude but universal:
a new "-pgpfp" command-line option. (Except Unix PuTTYgen, which takes
"--pgpfp" just to be awkward.)
* Move the key policy discussion from putty-website/keys.html to
putty/doc/pgpkeys.but, and autogenerate the former from the latter.
Also tweak the text somewhat and include the fingerprints of the
Master Keys themselves.
(I've merged the existing autogeneration scripts into a single new
one; I've left the old scripts and keys.html around until such time
as the webmonster reviews the changes and plumbs in the new script;
he should remove the old files then.)
[originally from svn r5524]
[this svn revision also touched putty-website]
discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol
version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com
implementations in this scheme). <http://www.snailbook.com/terms.html>
[originally from svn r5480]
This was harder than verify_ssh_host_key() and askalg() put
together, because:
(a) askappend() can be called at any time, since it's a side effect
of data-logging functions. Therefore there can be an unfinished
askappend() alert at any time, and hence the OS X front end has
to be prepared to _queue_ other alerts which occur during that
time.
(b) logging.c has to do something with data that comes in while
it's waiting for an answer to askappend(). It buffers it until
it knows what the user wants done with it. This involved
something of a reorganisation of logging.c.
[originally from svn r5344]
now returns an integer: 0 means cancel the SSH connection and 1
means continue with it. Additionally, they can return -1, which
means `front end has set an asynchronous alert box in motion, please
wait to be called back with the result', and each one is passed a
callback function pointer and context for this purpose.
I have not yet done the same to askappend() yet, because it will
take a certain amount of reorganisation of logging.c.
Importantly, this checkin means the host key dialog box now works on
OS X.
[originally from svn r5330]
changing its mouse pointer. Currently this is only used in the (slightly-
arbitrarily-defined) "heavy" bits of SSH-2 key exchange. We override pointer
hiding while PuTTY is busy, but preserve pointer-hiding state.
Not yet implemented on the Mac.
Also switch to frobbing window-class cursor in Windows rather than relying on
SetCursor().
[originally from svn r5303]
deal with rekeys at all: they totally ignore mid-session KEXINIT
sent by the client. Hence, a new bug entry so we don't try it.
[originally from svn r5092]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
mid-session if we are not using SSHv1. I've done this by introducing
a generic `cfg_info' function which every back end can use to
communicate an int's worth of data to setup_config_box; in SSH
that's the protocol version in use, and in everything else it's
currently zero.
[originally from svn r5040]
[r5031 == d77102a8d5]
(which will gain more content anon).
Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never
did find a way of automatically detecting this alleged server bug, and in any
case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW).
Also generalise askcipher() to a new askalg() (thus touching all the
front-ends).
I've made some attempt to document what SSH key exchange is and why you care,
but it could use some review for clarity (and outright lies).
[originally from svn r5022]
the start of every contiguous run passed to do_text() or
do_cursor(), and arranges never to overwrite only part of such a run
on the next update.
I'm a bit worried about this checkin because I've also completely
revamped cursor handling: the cursor was previously being drawn
_outside_ the main loop over the display line, and is now drawn as
part of that loop when it gets to the cursor location. It _seems_ to
still work sensibly, even in complex cases involving LATTR_WIDE and
double-width CJK characters etc, but I won't be entirely happy until
it's had some beta use.
[originally from svn r5003]
[this svn revision also touched putty-wishlist]
results in unacceptable performance for him on Win2000. Add a checkbox to
revert to the old behaviour.
[originally from svn r4988]
[this svn revision also touched putty-wishlist]
timing.c, and hence takes its own responsibility for calling
noise_regular() at regular intervals. Again, this means it will be
called consistently in _all_ the SSH-speaking tools, not just those
in which I remembered to call it!
[originally from svn r4913]
blink when the window doesn't have focus, we don't schedule blink
timers at that point either.
Infrastructure change: term->has_focus should now not be written
directly from outside terminal.c. Instead, use the function
term_set_focus, which will sort out the blink timers as well.
[originally from svn r4911]
