The only *use* of it was removed in commit 6a743399b0, where
instead of blocking the GTK signal that caused a string to be
overwritten, I switched to making a temporary copy of the string. But
I didn't notice that the declaration and assignments could be cleaned
up too.
Large chunks of the GTK setup code had a 2-space indent for some
reason, in place of the usual 4-space in this code base. I've been
meaning to sort it out for ages, because it makes it hard to have a
single set of editor settings suitable for the whole code base.
Instead of maintaining a single sparse table mapping Unicode to the
currently selected code page, we now maintain a collection of such
tables mapping Unicode to any code page we've so far found a need to
work with, and we add code pages to that list as necessary, and never
throw them away (since there are a limited number of them).
This means that the wc_to_mb family of functions are effectively
stateless: they no longer depend on a 'struct unicode_data'
corresponding to the current terminal settings. So I've removed that
parameter from all of them.
This fills in the missing piece of yesterday's commit a216d86106:
now wc_to_mb too should be able to handle internally-implemented
character sets, by hastily making their reverse mapping table if it
doesn't already have it.
(That was only a _latent_ bug, because the only use of wc_to_mb in the
cross-platform or Windows code _did_ want to convert to the currently
selected code page, so the old strategy worked in that case. But there
was no protection against an unworkable use of it being added later.)
Fixes a cosmetic issue where the new ConPTY error added in 4ae8b742ab
had an ugly "Unable to open connection to".
(Arguably this ought to test a backend property rather than
cmdline_tooltype.)
Without this, the build of e.g. psusan would fail on systems without
that header (such as Termux on Android).
This is similar to how things were pre-cmake, but not identical. We used
to treat lack of updwtmpx() as a reason to OMIT_UTMP (as of f0dfa73982),
but usage of that function got conditionalised in c19e7215dd, so I
haven't restored that exclusion.
When the user provides a password on the PuTTY command line, via -pw
or -pwfile, the flag 'tried_once' inside cmdline_get_passwd_input() is
intended to arrange that we only try sending that password once, and
after we've sent it, we don't try again.
But this plays badly with the 'Restart Session' operation. If the
connection is lost and then restarted at user request, we _do_ want to
send that password again!
So this commit moves that static variable out into a small state
structure held by the client of cmdline_get_passwd_input. Each client
can decide how to manage that state itself.
Clients that support 'Restart Session' - i.e. just GUI PuTTY itself -
will initialise the state at the same time as instantiating the
backend, so that every time the session is restarted, we return
to (correctly) believing that we _haven't_ yet tried the password
provided on the command line.
But clients that don't support 'Restart Session' - i.e. Plink and file
transfer tools - can do the same thing that cmdline.c was doing
before: just keep the state in a static variable.
This also means that the GUI login tools will now retain the
command-line password in memory, whereas previously they'd have wiped
it out once it was used. But the other tools will still wipe and free
the password, because I've also added a 'bool restartable' flag to
cmdline_get_passwd_input to let it know when it _is_ allowed to do
that.
In the GUI tools, I don't see any way to get round that, because if
the session is restarted you _have_ to still have the password to use
again. (And you can't infer that that will never happen from the
CONF_close_on_exit setting, because that too could be changed in
mid-session.) On the other hand, I think it's not all that worrying,
because the use of either -pw or -pwfile means that a persistent copy
of your password is *already* stored somewhere, so another one isn't
too big a stretch.
(Due to the change of -pw policy in 0.77, the effect of this bug was
that an attempt to reconnect in a session set up this way would lead
to "Configured password was not accepted". In 0.76, the failure mode
was different: PuTTY would interactively prompt for the password,
having wiped it out of memory after it was used the first time round.)
Commit 5390aef3fc broke it, because GTK1 has neither
gtk_label_set_selectable nor gtk_widget_set_can_focus. Happily, those
are both more or less optional (only a minor UI awkwardness arises
from not having them), so I'll just condition them out.
If the user holds down Alt-> so that the key repeats, then a second
call to change_font_size can occur while the window resize from the
previous one has yet to complete. This leads to the new pixel size of
the window from resize #1 being interpreted in the light of the font
size from reesize #2, so that the two get out of step and the
_character_ size of the terminal changes as a result.
The simplest fix is to disallow starting a second font-size-based
window resize while the first is still in flight - which, now that the
'win_resize_pending' flag lives in window.c and not terminal.c, is
easy to achieve.
In the changes around commit 420fe75552, I made the terminal
suspend output processing while it waited for a term_size() callback
in response to a resize request. Because on X11 there are unusual
circumstances in which you never receive that callback, I also added a
last-ditch 5-second timeout, so that eventually we'll resume terminal
output processing regardless.
But the timeout lives in terminal.c, in the cross-platform code. This
is pointless on Windows (where resize processing is synchronous, so we
always finish it before the timer code next gets called anyway), but I
decided it was easier to keep the whole mechanism in terminal.c in the
absence of a good reason not to.
Now I've found that reason. We _also_ generate window resizes locally
to the GTK front end, in response to the key combinations that change
the font size, and _those_ still have an asynchrony problem.
So, to begin with, I'm refactoring the request_resize system so that
now there's an explicit callback from the frontend to the terminal to
say 'Your resize request has now been processed, whether or not you've
received a term_size() call'. On Windows, this simplifies matters
greatly because we always know exactly when to call that, and don't
have to keep a 'have we called term_size() already?' flag. On GTK, the
timing complexity previously in terminal.c has moved into window.c.
No functional change (I hope). The payoff will be in the next commit.
This is for cases where they're presenting information to the user
that wouldn't wrap sensibly anyway (such as an SSH key fingerprint
which is mostly all one word), and in which newlines might be
significant.
On GTK, the implementing widget is still a GtkLabel, but without the
wrap flag set, and wrapped in a GtkScrolledWindow in case the text is
too wide to fit.
On Windows, I've switched to using an edit box instead of a static
text control, making it readonly, and borderless via my existing
MakeDlgItemBorderless helper function. This doesn't get you an actual
scrollbar, but it does mean you can scroll left and right by dragging
with the mouse.
This doesn't apply to every GtkLabel I instantiate: only the ones
constructed as part of implementing the cross-platform CTRL_TEXT.
Those labels contain information that the dialog box is deliberately
communicating to the user, so it seems a sensible idea to make sure
they can be copy-pasted.
By default, this also seems to cause them to become able to take the
input focus, so I've reverted that. You can select them with the
mouse, but I think having them appear in the tab order is an
awkwardness too far, since they're not active in any other way.
Previously, in the code that instantiated the dialog.h portable
control spec, an edit control with width=100 would be implemented as a
small Columns object containing the label and the edit control atop
each other. Now, instead, the two controls are placed separately into
the containing Columns.
Combined with the changes just made to the align_next_to system, this
means that you can put buttons to the right of such an edit box and
have them line up with the actual edit box, instead of trying to line
up with the combination of the box and its label.
(The Windows alignment system already identified the specific edit box
control as the relevant one, so this was already working there.)
Various alignments I want to do in the host CA box have shown up
deficiencies in this system, so I've reworked it a bit.
Firstly, you can now specify more than two controls to be tied
together with an align_next_to (e.g. multiple checkboxes alongside
something else).
Secondly, as well as forcing the controls to be the same height as
each other, the layout algorithm will also move the later controls
further _downward_, so that their top y positions also line up. Until
now that hasn't been necessary, because they lined up already.
In the GTK implementation of this via the Columns class, I've renamed
'columns_force_same_height' to 'columns_align_next_to', and similarly
for some of the internal fields, since the latter change makes the
previous names a misnomer.
In the Windows implementation, I found it most convenient to set this
up by following a linked list of align_next_to fields backwards. But
it won't always be convenient to initialise them that way, so I've
also written a crude normaliser that will rewrite those links into a
canonical form. But I only call that on Windows; it's unnecessary in
GTK, where the Columns class provides plenty of per-widget extra
storage so I just keep each alignment class as a circular list.
As distinct from the type of signature generated by the SSH server
itself from the host key, this lets you exclude (and by default does
exclude) the old "ssh-rsa" SHA-1 signature type from the signature of
the CA on the certificate.
This will allow the central host_ca_new function to pre-populate the
structure with default values for the fields, so that once I add more
options to CA configuration they can take their default values when
loading a saved record from a previous PuTTY version.
In the course of polishing up this dialog box, I'm going to want it to
actually do cryptographic things (such as checking validity of a
public key blob and printing its fingerprint), which means it will
need to link against SSH utility functions.
So I've moved the dialog-box setup and handling code out of config.c
into a new file in the ssh subdirectory and in the ssh library, where
those facilities will be conveniently available.
This also means that dialog-box setup code _won't_ be linked into
PuTTYtel or pterm (on either platform), so I've added a stub source
file to provide its entry-point function in those tools. Also,
provided a const bool to indicate whether that dialog is available,
which we use to decide whether to recognise that command-line option.
Instead of an edit box together with a Browse button that pops up a
sub-dialog, this is _just_ the browse button, only now it has a
user-defined title. I'm about to want to use this for loading CA
public keys from files.
This causes PuTTY to bring up just the host CA configuration dialog
box, and shut down once that box is dismissed.
I can imagine it potentially being useful to users, but in the first
instance, I expect it to be useful to _me_, because it will greatly
streamline testing changes to the UI of that dialog!
This gets rid of that awkward STANDARD_PREFIX system in which every
branch of the old 'union control' had to repeat all the generic
fields, and then call sites had to make an arbitrary decision about
which branch to access them through.
That was the best we could do before accepting C99 features in this
code base. But now we have anonymous unions, so we don't need to put
up with that nonsense any more!
'dlgcontrol' is now a struct rather than a union, and the generic
fields common to all control types are ordinary members of the struct,
so you don't have to refer to them as ctrl->generic.foo at all, just
ctrl->foo, which saves verbiage at the point of use.
The extra per-control fields are still held in structures named after
the control type, so you'll still say ctrl->listbox.height or
whatever. But now those structures are themselves members of an
anonymous union field following the generic fields, so those
sub-structures don't have to reiterate all the standard stuff too.
While I'm here, I've promoted 'context2' from an editbox-specific
field to a generic one (it just seems silly _not_ to allow any control
to have two context fields if it needs it). Also, I had to rename the
boolean field 'tabdelay' to avoid it clashing with the subsidiary
structure field 'tabdelay', now that the former isn't generic.tabdelay
any more.
I'm about to change my mind about whether its top-level nature is
struct or union, and rather than change the key word 'union' to
'struct' at every point of use, it's nicer to just get rid of the
keyword completely. So it has a shiny new name.
I just tried to trace through the Windows version's control flow in
response to a confusing bug report, and found that the control flow
itself was so confusing I couldn't make sense of it. Why are we
choosing between getaddrinfo and gethostbyname via #ifndef NO_IPV6,
then re-converging control flow and diverging a second time to report
the error?
So I rewrote the whole thing to have completely separate sections of
code dealing with the three resolution strategies, each with its own
dedicated error reporting system. And then I checked the Unix version
and found it was about as confusing, so I rewrote that too in the same
style. Now the two are mostly the same, except for details: Unix has
an override at the top for a Unix socket pathname, Windows has to cope
with getaddrinfo maybe not being found at run time (so the other cases
aren't in the #else clause), and Windows uses the same error reporting
for both lookup functions whereas Unix has to use the appropriate
gai_strerror or hstrerror.
Now we offer the OpenSSH certificate key types in our KEXINIT host key
algorithm list, so that if the server has a certificate, they can send
it to us.
There's a new storage.h abstraction for representing a list of trusted
host CAs, and which ones are trusted to certify hosts for what
domains. This is stored outside the normal saved session data, because
the whole point of host certificates is to avoid per-host faffing.
Configuring this set of trusted CAs is done via a new GUI dialog box,
separate from the main PuTTY config box (because it modifies a single
set of settings across all saved sessions), which you can launch by
clicking a button in the 'Host keys' pane. The GUI is pretty crude for
the moment, and very much at a 'just about usable' stage right now. It
will want some polishing.
If we have no CA configured that matches the hostname, we don't offer
to receive certified host keys in the first place. So for existing
users who haven't set any of this up yet, nothing will immediately
change.
Currently, if we do offer to receive certified host keys and the
server presents one signed by a CA we don't trust, PuTTY will bomb out
unconditionally with an error, instead of offering a confirmation box.
That's an unfinished part which I plan to fix before this goes into a
release.
This makes room to add more entries without the Proxy panel
overflowing. It also means we can put in a bit more explanation in
some of the more cryptic one-word names!
I got a pterm into a stuck state this morning by an accidental mouse
action. I'd intended to press Ctrl + right-click to pop up the context
menu, but I accidentally pressed down the left button first, starting
a selection drag, and then while the left button was still held down,
pressed down the right button as well, triggering the menu.
The effect was that the context menu appeared while term->selstate was
set to DRAGGING, in which state terminal output is suppressed, and
which is only unset by a mouse-button release event. But then that
release event went to the popup menu, and the terminal window never
got it. So the terminal stayed stuck forever - or rather, until I
guessed the cause and did another selection drag to reset it.
This happened to me on GTK, but once I knew how I'd done it, I found I
could reproduce the same misbehaviour on Windows by the same method.
Added a simplistic fix, on both platforms, that cancels a selection
drag if the popup menu is summoned part way through it.
Checking various implementations of these functions against each
other, I noticed by eyeball review that some of the special cases in
mb_to_wc() never check the buffer limit at all. Yikes!
Fortunately, I think there's no vulnerability, because these special
cases are ones that write out at most one wide char per multibyte
char, and at all the call sites (including dup_mb_to_wc) we allocate
that much even for the first attempt. The only exception to that is
the call in key_event() in unix/window.c, which uses a fixed-size
output buffer, but its input will always be the data generated by an X
keystroke event. So that one can only overrun the buffer if an X key
event manages to translate into more than 32 wide characters of text -
and even if that does come up in some exotic edge case, it will at
least not be happening under _enemy_ control.
When the window can't be resized for any reason, there will be extra
space inside the drawing area that's not part of our standard
width*font_width+2*window_border. We should include that in the
backing surface and make sure we erase it to the background colour,
otherwise it can end up containing unwanted visual junk.
An example is the same case described in the previous commit: maximise
the window and then start playing about with the font size. If you do
this while running a full-screen application that displays text in the
bottom line, it's easy to see that part of the previous display is
left over and not cleared when the new font size leaves more space at
the bottom than the old one.
If you maximise the terminal window and then press Ctrl-> or Ctrl-< to
change the font size, then the maximised window can't change size, so
what _should_ happen instead is that the terminal adjusts the number
of character cells to whatever the new font size will now permit in
the same size of window as before.
But in fact, the terminal size wasn't changing at all, because the
call to gtkwin_request_resize (called from change_font_size) detected
the maximised window and went straight to gtkwin_deny_term_resize,
which immediately called term_size() to tell the terminal it still had
the same size as before.
This commit switches gtkwin_deny_term_resize so that instead it calls
drawing_area_setup_simple(), which re-runs drawing_area_setup with the
same size the drawing area already had. This should work out the same
in the case where we're _not_ changing the font size, but now also
does the right thing when we are.
Unix Pageant is in a tricky position as a hybrid CLI/GUI application.
It has uses even in a purely CLI environment, but it won't build
without libgtk-3-dev and friends.
The solution, of course - enabled by the migration to cmake - is to
allow it to build without GTK, leaving out just the GTK askpass
functionality. That way you can still use it in any of its CLI modes,
either as a non-graphical SSH agent or as a client for an agent
elsewhere.
(You can still even use it in X lifetime mode, because its connection
to the X server is done using PuTTY's built-in X authentication and
connection setup code. It's only putting up the password prompt window
that you lose in this configuration - so you're still fine as long as
you don't try to add any encrypted keys.)
Correcting a source file name in the docs just now reminded me that
I've seen a lot of outdated source file names elsewhere in the code,
due to all the reorganisation since we moved to cmake. Here's a giant
pass of trying to make them all accurate again.
All the seat functions that request an interactive prompt of some kind
to the user - both the main seat_get_userpass_input and the various
confirmation dialogs for things like host keys - were using a simple
int return value, with the general semantics of 0 = "fail", 1 =
"proceed" (and in the case of seat_get_userpass_input, answers to the
prompts were provided), and -1 = "request in progress, wait for a
callback".
In this commit I change all those functions' return types to a new
struct called SeatPromptResult, whose primary field is an enum
replacing those simple integer values.
The main purpose is that the enum has not three but _four_ values: the
"fail" result has been split into 'user abort' and 'software abort'.
The distinction is that a user abort occurs as a result of an
interactive UI action, such as the user clicking 'cancel' in a dialog
box or hitting ^D or ^C at a terminal password prompt - and therefore,
there's no need to display an error message telling the user that the
interactive operation has failed, because the user already knows,
because they _did_ it. 'Software abort' is from any other cause, where
PuTTY is the first to know there was a problem, and has to tell the
user.
We already had this 'user abort' vs 'software abort' distinction in
other parts of the code - the SSH backend has separate termination
functions which protocol layers can call. But we assumed that any
failure from an interactive prompt request fell into the 'user abort'
category, which is not true. A couple of examples: if you configure a
host key fingerprint in your saved session via the SSH > Host keys
pane, and the server presents a host key that doesn't match it, then
verify_ssh_host_key would report that the user had aborted the
connection, and feel no need to tell the user what had gone wrong!
Similarly, if a password provided on the command line was not
accepted, then (after I fixed the semantics of that in the previous
commit) the same wrong handling would occur.
So now, those Seat prompt functions too can communicate whether the
user or the software originated a connection abort. And in the latter
case, we also provide an error message to present to the user. Result:
in those two example cases (and others), error messages should no
longer go missing.
Implementation note: to avoid the hassle of having the error message
in a SeatPromptResult being a dynamically allocated string (and hence,
every recipient of one must always check whether it's non-NULL and
free it on every exit path, plus being careful about copying the
struct around), I've instead arranged that the structure contains a
function pointer and a couple of parameters, so that the string form
of the message can be constructed on demand. That way, the only users
who need to free it are the ones who actually _asked_ for it in the
first place, which is a much smaller set.
(This is one of the rare occasions that I regret not having C++'s
extra features available in this code base - a unique_ptr or
shared_ptr to a string would have been just the thing here, and the
compiler would have done all the hard work for me of remembering where
to insert the frees!)
This fills in the remaining gap in the interactive prompt rework of
the proxy system in general. If you used the Telnet proxy with a
command containing %user or %pass, and hadn't filled in those
variables in the PuTTY config, then proxy/telnet.c would prompt you at
run time to enter the proxy auth details. But the local proxy command,
which uses the same format_telnet_command function, would not do that.
Now it does!
I've implemented this by moving the formatting of the proxy command
into a new module proxy/local.c, shared between both the Unix and
Windows local-proxy implementations. That module implements a
DeferredSocketOpener, which constructs the proxy command (prompting
first if necessary), and once it's constructed, hands it to a
per-platform function platform_setup_local_proxy().
So each platform-specific proxy function, instead of starting a
subprocess there and then and passing its details to make_fd_socket or
make_handle_socket, now returns a _deferred_ version of one of those
sockets, with the DeferredSocketOpener being the thing in
proxy/local.c. When that calls back to platform_setup_local_proxy(),
we actually start the subprocess and pass the resulting fds/handles to
the deferred socket to un-defer it.
A side effect of the rewrite is that when proxy commands are logged in
the Event Log, they now get the same amenities as in the Telnet proxy
type: the proxy password is sanitised out, and any difficult
characters are escaped.
Previously, a setup function returning one of these socket types (such
as platform_new_connection) had to do all its setup synchronously,
because if it was going to call make_fd_socket or make_handle_socket,
it had to have the actual fds or HANDLEs ready-made. If some kind of
asynchronous operation were needed before those fds become available,
there would be no way the function could achieve it, except by
becoming a whole extra permanent Socket wrapper layer.
Now there is, because you can make an FdSocket when you don't yet have
the fds, or a HandleSocket without the HANDLEs. Instead, you provide
an instance of the new trait 'DeferredSocketOpener', which is
responsible for setting in motion whatever asynchronous setup
procedure it needs, and when that finishes, calling back to
setup_fd_socket / setup_handle_socket to provide the missing pieces.
In the meantime, the FdSocket or HandleSocket will sit there inertly,
buffering any data the client might eagerly hand it via sk_write(),
and waiting for its setup to finish. When it does finish, buffered
data will be released.
In FdSocket, this is easy enough, because we were doing our own
buffering anyway - we called the uxsel system to find out when the fds
were readable/writable, and then wrote to them from our own bufchain.
So more or less all I had to do was make the try_send function do
nothing if the setup phase wasn't finished yet.
In HandleSocket, on the other hand, we're passing all our data to the
underlying handle-io.c system, and making _that_ deferrable in the
same way would be much more painful, because that's the place where
the scary threads live. So instead I've arranged it by replacing the
whole vtable, so that a deferred HandleSocket and a normal
HandleSocket are effectively separate trait implementations that can
share their state structure. And in fact that state struct itself now
contains a big anonymous union, containing one branch to go with each
vtable.
Nothing yet uses this system, but the next commit will do so.
This will mean that platform-specific proxy types will also be able to
set themselves up as child Interactors and prompt the user
interactively for passwords and the like.
NFC: nothing uses the new parameter yet.
Now, when you resize the Event Log window, the list box grows in both
directions. Previously, as a side effect of the Columns-based layout,
it grew only horizontally.
I've arranged this by adding an extra wrinkle to the Columns layout
system, which allows you to tag _exactly one_ widget in the whole
container as the 'vexpand' widget. When the Columns is size-allocated
taller than its minimum height, the vexpand widget is given all the
extra space.
This technique ports naturally across all versions of GTK (since the
hard part is done in my own code). But it's limited: you can't set
more than one widget to be vexpand (which saves having to figure out
whether they're side by side and can expand in parallel, or vertically
separated and each have to get half the available extra space, etc).
And in complex layouts where the widget you really want to expand is
in a sub-Columns, there's no system for recursively searching down to
find it.
In other words, this is a one-shot bodge for the Event Log, and it
will want more work if we ever plan to extend it to list boxes in the
main config dialog.
While re-testing on Wayland after all this churn of the window
resizing code, I discovered that the window constantly came out a few
pixels too small, losing a character cell in width and height. This
stopped happening once I experimentally stopped setting geometry
hints.
Source-diving in GTK, it turns out that this is because the GDK
Wayland backend is applying the geometry hints to the size of the
window including 'margins', which are a very large extra space around
a window beyond even the visible 'non-client-area' furniture like the
title bar. And I have no idea how you find out the size of those
margins, so I can't allow for them in the geometry hints.
I also noticed that gtk_window_set_geometry_hints is removed in GTK 4,
which suggests that GTK upstream are probably not interested in
fiddling with them until they work more usefully (even if they would
agree with me that this is a bug in the first place, which I have no
idea). A simpler workaround is to avoid setting geometry hints at all
on any GDK backend other than X11.
So, that's what this commit does. On Wayland (or other backends), the
window can now be resized a pixel at a time, and if its size doesn't
work out to a whole number of character cells, then you just get some
dead space at the edges. Not especially nice, but better than the
alternatives I can see.
One other job the geometry hints were doing was to forbid resizing if
the backend sets the BACKEND_RESIZE_FORBIDDEN flag (which SUPDUP
does). That's now done at window creation time, via
gtk_window_set_resizable.
The window size set in the geometry hints when the backend has the
BACKEND_RESIZE_FORBIDDEN flag was computed in a simplistic way that
forgot to take account of window furniture like scrollbars and menu
bars. Now it's computed based on the rest of the geometry hints, which
are more accurate.
If the Seat that the pty backend is talking to starts to back up, then
we ought to temporarily stop reading from the pty device, to pass that
back-pressure on to whatever's running in the terminal.
Previously, this didn't matter because a Seat running a GUI terminal
never backed up anyway. But now it does, so we should support it all
the way through the system.
Normally, the GTK code runs toplevel callbacks from a GTK 'idle
function'. But those mean what they say: they are considered
low-priority, to be run _only_ when the system is idle - so they can
fail to run at all in conditions of a steady stream of higher-priority
things, e.g. something is throwing data at the application so fast
that every main-loop iteration finds a readable fd.
And that's not good, because _we_ don't think our callbacks are
low-priority: they do a lot of really important work like redrawing
the window. So if they never get round to happening, PuTTY or pterm
can appear to lock up.
Simple solution to that one: whenever we process a select notification
on any fd, we _also_ call run_toplevel_callbacks(). Then our callbacks
are bound to happen reasonably regularly.
The return value of term_data() is used as the return value from the
GUI-terminal versions of the Seat output method, which means backends
will take it to be the amount of standard-output data currently
buffered, and exert back-pressure on the remote peer if it gets too
big (e.g. by ceasing to extend the window in that particular SSH-2
channel).
Historically, as a comment in term_data() explained, we always just
returned 0 from that function, on the basis that we were processing
all the terminal data through our terminal emulation code immediately,
and never retained any of it in the buffer at all. If the terminal
emulation code were to start running slowly, then it would slow down
the _whole_ PuTTY system, due to single-threadedness, and
back-pressure of a sort would be exerted on the remote by it simply
failing to get round to reading from the network socket. But by the
time we got back to the top level of term_data(), we'd have finished
reading all the data we had, so it was still appropriate to return 0.
That comment is still correct if you're thinking about the limiting
factor on terminal data processing being the CPU usage in term_out().
But now that's no longer the whole story, because sometimes we leave
data in term->inbuf without having processed it: during drag-selects
in the terminal window, and (just introduced) while waiting for the
response to a pending window resize request. For both those reasons,
we _don't_ always have a buffer size of zero when we return from
term_data().
So now that hole in our buffer size management is filled in:
term_data() returns the true size of the remaining unprocessed
terminal output, so that back-pressure will be exerted if the terminal
is currently not consuming it. And when processing resumes and we
start to clear our backlog, we call backend_unthrottle to let the
backend know it can relax the back-pressure if necessary.
When the terminal asks its TermWin for a resize, the resize operation
happens asynchronously (or can do), and sooner or later, the terminal
will see a term_size() telling it the resize has actually taken
effect.
If the resize _doesn't_ take effect for any reason - e.g. because the
window is maximised, or because the X11 window manager is a tiling one
which will refuse requests to change the window size anyway - then the
terminal never got any explicit notification of refusal to resize. Now
it should, in as many cases as I can arrange.
One obvious case of this is the early exit I recently added to
gtkwin_request_resize() when the window is known to be in a maximised
or tiled state preventing a resize: in that situation, when our own
code knows we're not even attempting the resize, we also queue a
toplevel callback to tell the terminal so.
The more interesting case is when the request is refused for a reason
GTK _didn't_ know in advance, e.g. because the user is running an X11
tiling window manager such as i3, which generally refuses windows'
resize requests. In X11, if a window manager refuses an attempt to
change the window's size via ConfigureWindow, ICCCM says it should
respond by sending a synthetic ConfigureNotify event restating the
same size. Such no-op configure events do reach the "configure_event"
handler in a GTK program, but they weren't previously getting as far
as term_size(), because the call to term_size() was triggered from the
GTK "size_allocate" event on the GtkDrawingArea inside the window (via
drawing_area_setup()), so GTK would detect that nothing had changed.
Now we queue a last-ditch toplevel callback which ensures that if the
configure event doesn't also cause a size_allocate and a call to
drawing_area_setup(), then we cause one of our own once the dust has
settled. And drawing_area_setup(), in turn, now unconditionally calls
term_size() even if the size is the same as it was last time, instead
of taking an early exit. (It still does take an early exit to avoid
unnecessary faffing with Cairo surfaces etc, but _after_ term_size()).
This won't be 100% reliable, because it's the window manager's
responsibility to send those synthetic ConfigureNotify events, and a
window manager is a fallible process which could get into a stuck
state. But it covers all the cases I know of that _can_ be sensibly
covered - so now, when terminal.c asks the front end to resize the
window, it ought to find out in a timely manner whether or not that
has happened, in _almost_ all cases.
This is another thing that seems harmless on X11 but causes window
redraws to semipermanently stop happening on Wayland: if we try to
gtk_window_resize() a window that is maximised at the time, then
something mysterious goes wrong and we stop ever getting "draw" events.
The event should return a 'gboolean', indicating whether the event
needs propagating any further. We were returning void, which meant
that the default handling might be accidentally suppressed.
On Wayland, this had the particularly nasty effect that window redraws
would stop completely if you maximised the terminal window.
(By trial and error I found that this stopped happening if I removed
GDK_HINT_RESIZE_INC from the geometry hints, from which I guess that
the default window-state-event handler is doing something important
relating to that hint, or would have been if we hadn't accidentally
suppressed it. But the bug is clearly here.)
These alternate frontends using the GtkApplication class don't work
before GTK3, because the GtkApplication class didn't exist. In the old
mkfiles.pl system, the simplest way to prevent a build failure was to
just compile them anyway but make them reduce to a stub main(). But
now, with the new library-based code organisation, library search
order issues mean that these applications won't build at all.
Happily, with cmake, it's also easy to simply omit these binaries from
the build completely depending on our GTK version.
It's unquestionably a test program, and I'm generally clearing those
out of the top level. I only missed it in the last clearout because I
was looking for things with 'test' in the name.
This commit replaces all those fiddly little linking modules
(be_all.c, be_none.c, be_ssh.c etc) with a single source file
controlled by ifdefs, and introduces a function be_list() in
setup.cmake that makes it easy to compile a version of it appropriate
to each application.
This is a net reduction in code according to 'git diff --stat', even
though I've introduced more comments. It also gets rid of another pile
of annoying little source files in the top-level directory that didn't
deserve to take up so much room in 'ls'.
More concretely, doing this has some maintenance advantages.
Centralisation means less to maintain (e.g. n_ui_backends is worked
out once in a way that makes sense everywhere), and also, 'appname'
can now be reliably set per program. Previously, some programs got the
wrong appname due to sharing the same linking module (e.g. Plink had
appname="PuTTY"), which was a latent bug that would have manifested if
I'd wanted to reuse the same string in another context.
One thing I've changed in this rework is that Windows pterm no longer
has the ConPTY backend in its backends[]: it now has an empty one. The
special be_conpty.c module shouldn't really have been there in the
first place: it was used in the very earliest uncommitted drafts of
the ConPTY work, where I was using another method of selecting that
backend, but now that Windows pterm has a dedicated
backend_vt_from_conf() that refers to conpty_backend by name, it has
no need to live in backends[] at all, just as it doesn't have to in
Unix pterm.
I'm actually quite surprised there was only _one_ copy of each of
these standard macros in the code base, given my general habit of
casually redefining them anywhere I need them! But each one was in a
silly place. Moved them up to the top level where they're available
globally.
While I'm in the mood for cleaning up the top-level directory here:
all the 'nostuff.c' files have moved into a new 'stubs' directory, and
I broke up be_misc.c into smaller modules that can live in 'utils'.
Now testcrypt has _two_ header files, that's more files than I want at
the top level, so I decided to move it.
It has a good claim to live in either 'test' or 'crypto', but in the
end I decided it wasn't quite specific enough to crypto (it already
also tests things in keygen and proxy), and also, the Python half of
the mechanism already lives in 'test', so it can live alongside that.
Having done that, it seemed silly to leave testsc and testzlib at the
top level: those have 'test' in the names as well, so they can go in
the test subdir as well.
While I'm renaming, also renamed testcrypt.h to testcrypt-func.h to
distinguish it from the new testcrypt-enum.h.
The Telnet proxy system is not a proper network protocol - we have no
reliable way to receive communication from the proxy telling us
whether a password is even required. However, we _do_ know (a) whether
the keywords '%user' or '%pass' appeared in the format string stored
in the Conf, and (b) whether we actually had a username or a password
to substitute into them. So that's how we know whether to ask for a
username or a password: if the format string asks for them and the
Conf doesn't provide them, we prompt for them at startup.
This involved turning TelnetProxyNegotiator into a coroutine (matching
all the other proxy types, but previously, it was the only one simple
enough not to need to be one), so that it can wait until a response
arrives to that prompt. (And also, as it turned out, so that it can
wait until setup is finished before even presenting the prompt!)
It also involves having format_telnet_command grow an extra output
parameter, in the form of 'unsigned *flags', with which it can
communicate back to the caller that a username or password was wanted
but not found. The other clients of that function (the local proxy
implementations) don't use those flags, but if necessary, they could.
When I wanted to append an ordinary C string to a BinarySink, without
any prefix length field or suffix terminator, I was using the idiom
put_datapl(bs, ptrlen_from_asciz(string));
but I've finally decided that's too cumbersome, and it deserves a
shorter name. put_dataz(bs, string) now does the same thing - in fact
it's a macro expanding to exactly the above.
While I'm at it, I've also added put_datalit(), which is the same
except that it expects a C string literal (and will enforce that at
compile time, via PTRLEN_LITERAL which it calls in turn). You can use
that where possible to avoid the run-time cost of the strlen.
marshal.h now provides a macro put_fmt() which allows you to write
arbitrary printf-formatted data to an arbitrary BinarySink.
We already had this facility for strbufs in particular, in the form of
strbuf_catf(). That was able to take advantage of knowing the inner
structure of a strbuf to minimise memory allocation (it would snprintf
directly into the strbuf's existing buffer if possible). For a general
black-box BinarySink we can't do that, so instead we dupvprintf into a
temporary buffer.
For consistency, I've removed strbuf_catf, and converted all uses of
it into the new put_fmt - and I've also added an extra vtable method
in the BinarySink API, so that put_fmt can still use strbuf_catf's
more efficient memory management when talking to a strbuf, and fall
back to the simpler strategy when that's not available.
(TL;DR: to suppress redundant 'Press Return to begin session' prompts
in between hops of a jump-host configuration, in Plink.)
This new query method directly asks the Seat the question: is the same
stream of input used to provide responses to interactive login
prompts, and the session input provided after login concludes?
It's used to suppress the last-ditch anti-spoofing defence in Plink of
interactively asking 'Access granted. Press Return to begin session',
on the basis that any such spoofing attack works by confusing the user
about what's a legit login prompt before the session begins and what's
sent by the server after the main session begins - so if those two
things take input from different places, the user can't be confused.
This doesn't change the existing behaviour of Plink, which was already
suppressing the antispoof prompt in cases where its standard input was
redirected from something other than a terminal. But previously it was
doing it within the can_set_trust_status() seat query, and I've now
moved it out into a separate query function.
The reason why these need to be separate is for SshProxy, which needs
to give an unusual combination of answers when run inside Plink. For
can_set_trust_status(), it needs to return whatever the parent Seat
returns, so that all the login prompts for a string of proxy
connections in session will be antispoofed the same way. But you only
want that final 'Access granted' prompt to happen _once_, after all
the proxy connection setup phases are done, because up until then
you're still in the safe hands of PuTTY itself presenting an unbroken
sequence of legit login prompts (even if they come from a succession
of different servers). Hence, SshProxy unconditionally returns 'no' to
the query of whether it has a single mixed input stream, because
indeed, it never does - for purposes of session input it behaves like
an always-redirected Plink, no matter what kind of real Seat it ends
up sending its pre-session login prompts to.
Passing an operating-system-specific error code to plug_closing(),
such as errno or GetLastError(), was always a bit weird, given that it
generally had to be handled by cross-platform receiving code in
backends. I had the platform.h implementations #define any error
values that the cross-platform code would have to handle specially,
but that's still not a great system, because it also doesn't leave
freedom to invent error representations of my own that don't
correspond to any OS code. (For example, the ones I just removed from
proxy.h.)
So now, the OS error code is gone from the plug_closing API, and in
its place is a custom enumeration of closure types: normal, error, and
the special case BROKEN_PIPE which is the only OS error code we have
so far needed to handle specially. (All others just mean 'abandon the
connection and print the textual message'.)
Having already centralised the handling of OS error codes in the
previous commit, we've now got a convenient place to add any further
type codes for errors needing special handling: each of Unix
plug_closing_errno(), Windows plug_closing_system_error(), and Windows
plug_closing_winsock_error() can easily grow extra special cases if
need be, and each one will only have to live in one place.
Having a single plug_closing() function covering various kinds of
closure is reasonably convenient from the point of view of Plug
implementations, but it's annoying for callers, who all have to fill
in pointless NULL and 0 parameters in the cases where they're not
used.
Added some inline helper functions in network.h alongside the main
plug_closing() dispatch wrappers, so that each kind of connection
closure can present a separate API for the Socket side of the
interface, without complicating the vtable for the Plug side.
Also, added OS-specific extra helpers in the Unix and Windows
directories, which centralise the job of taking an OS error code (of
whatever kind) and translating it into its error message.
In passing, this removes the horrible ad-hoc made-up error codes in
proxy.h, which is OK, because nothing checked for them anyway, and
also I'm about to do an API change to plug_closing proper that removes
the need for them.
Thanks to the previous commit, this new parameter can replace two of
the existing ones: instead of passing a LogPolicy and a Seat, we now
pass just an Interactor, from which any proxy implementation can
extract the LogPolicy and the Seat anyway if they need it.
Previously, SSH authentication banners were displayed by calling the
ordinary seat_output function, and passing it a special value in the
SeatOutputType enumeration indicating an auth banner.
The awkwardness of this was already showing a little in SshProxy's
implementation of seat_output, where it had to check for that special
value and do totally different things for SEAT_OUTPUT_AUTH_BANNER and
everything else. Further work in that area is going to make it more
and more awkward if I keep the two output systems unified.
So let's split them up. Now, Seat has separate output() and banner()
methods, which each implementation can override differently if it
wants to.
All the 'end user' Seat implementations use the centralised
implementation function nullseat_banner_to_stderr(), which turns
banner text straight back into SEAT_OUTPUT_STDERR and passes it on to
seat_output. So I didn't have to tediously implement a boring version
of this function in GTK, Windows GUI, consoles, file transfer etc.
There are quite a few of them already, and I'm about to make another
one, so let's start with a bit of tidying up.
The CMake build organisation is unchanged: I haven't put the proxy
object files into a separate library, just moved the locations of the
source files. (Organising proxying as a library would be tricky
anyway, because of the various overrides for tools that want to avoid
cryptography.)
Now every struct that implements the Backend trait is completely
cleared before we start initialising any of its fields. This will mean
I can add new fields that default to 0 or NULL, without having to mess
around initialising them explicitly everywhere.
After this change, the cmake setup now works even on Debian stretch
(oldoldstable), which runs cmake 3.7.
In order to support a version that early I had to:
- write a fallback implementation of 'add_compile_definitions' for
older cmakes, which is easy, because add_compile_definitions(FOO)
is basically just add_compile_options(-DFOO)
- stop using list(TRANSFORM) and string(JOIN), of which I had one
case each, and they were easily replaced with simple foreach loops
- stop putting OBJECT libraries in the target_link_libraries command
for executable targets, in favour of adding $<TARGET_OBJECTS:foo>
to the main sources list for the same target. That matches what I
do with library targets, so it's probably more sensible anyway.
I tried going back by another Debian release and getting this cmake
setup to work on jessie, but that runs CMake 3.0.1, and in _that_
version of cmake the target_sources command is missing, and I didn't
find any alternative way to add extra sources to a target after having
first declared it. Reorganising to cope with _that_ omission would be
too much upheaval without a very good reason.
Previously, checking the host key against the persistent cache managed
by the storage.h API was done as part of the seat_verify_ssh_host_key
method, i.e. separately by each Seat.
Now that check is done by verify_ssh_host_key(), which is a new
function in ssh/common.c that centralises all the parts of host key
checking that don't need an interactive prompt. It subsumes the
previous verify_ssh_manual_host_key() that checked against the Conf,
and it does the check against the storage API that each Seat was
previously doing separately. If it can't confirm or definitively
reject the host key by itself, _then_ it calls out to the Seat, once
an interactive prompt is definitely needed.
The main point of doing this is so that when SshProxy forwards a Seat
call from the proxy SSH connection to the primary Seat, it won't print
an announcement of which connection is involved unless it's actually
going to do something interactive. (Not that we're printing those
announcements _yet_ anyway, but this is a piece of groundwork that
works towards doing so.)
But while I'm at it, I've also taken the opportunity to clean things
up a bit by renaming functions sensibly. Previously we had three very
similarly named functions verify_ssh_manual_host_key(), SeatVtable's
'verify_ssh_host_key' method, and verify_host_key() in storage.h. Now
the Seat method is called 'confirm' rather than 'verify' (since its
job is now always to print an interactive prompt, so it looks more
like the other confirm_foo methods), and the storage.h function is
called check_stored_host_key(), which goes better with store_host_key
and avoids having too many functions with similar names. And the
'manual' function is subsumed into the new centralised code, so
there's now just *one* host key function with 'verify' in the name.
Several functions are reindented in this commit. Best viewed with
whitespace changes ignored.
The current 'displayname' field is designed for presenting in the
config UI, so it starts with a capital letter even when it's not a
proper noun. If I want to name the backend in the middle of a
sentence, I'll need a version that starts with lowercase where
appropriate.
The old field is renamed displayname_tc, to avoid ambiguity.
It was totally unused. No implementation of the 'closing' method in a
Plug vtable was checking it for any reason at all, except for
ProxySocket which captured it from its client in order to pass on to
its server (which, perhaps after further iterations of ProxySocket,
would have ended up ignoring it similarly). And every caller of
plug_closing set it to 0 (aka false), except for the one in sshproxy.c
which passed true (but it would have made no difference to anyone).
The comment in network.h refers to a FIXME comment which was in
try_send() when that code was written (see winnet.c in commit
7b0e082700). That FIXME is long gone, replaced by a use of a
toplevel callback. So I think the aim must have been to avoid
re-entrancy when sk_write called try_send which encountered a socket
error and called back to plug_closing - but that's long since fixed by
other means now.
This is the same as the previous FUNKY_XTERM mode if you don't press
any modifier keys, but now Shift or Ctrl or Alt with function keys
adds an extra bitmap parameter. The bitmaps are the same as the ones
used by the new SHARROW_BITMAP arrow key mode.
As well as affecting the bitmap field in the escape sequence, it was
_also_ having its otherwise standard effect of prefixing Esc to the
whole sequence. It shouldn't do both.
This commit introduces a new config option for how to handle shifted
arrow keys.
In the default mode (SHARROW_APPLICATION), we do what we've always
done: Ctrl flips the arrow keys between sending their most usual
escape sequences (ESC [ A ... ESC [ D) and sending the 'application
cursor keys' sequences (ESC O A ... ESC O D). Whichever of those modes
is currently configured, Ctrl+arrow sends the other one.
In the new mode (SHARROW_BITMAP), application cursor key mode is
unaffected by any shift keys, but the default sequences acquire two
numeric arguments. The first argument is 1 (reflecting the fact that a
shifted arrow key still notionally moves just 1 character cell); the
second is the bitmap (1 for Shift) + (2 for Alt) + (4 for Ctrl),
offset by 1. (Except that if _none_ of those modifiers is pressed,
both numeric arguments are simply omitted.)
The new bitmap mode is what current xterm generates, and also what
Windows ConPTY seems to expect. If you start an ordinary Command
Prompt and launch into WSL, those are the sequences it will generate
for shifted arrow keys; conversely, if you run a Command Prompt within
a ConPTY, then these sequences for Ctrl+arrow will have the effect you
expect in cmd.exe command-line editing (going backward or forward a
word). For that reason, I enable this mode unconditionally when
launching Windows pterm.
While fixing the previous commit I noticed that window titles don't
actually _work_ properly if you change the terminal character set,
because the text accumulated in the OSC string buffer is sent to the
TermWin as raw bytes, with no indication of what character set it
should interpret them as. You might get lucky if you happened to
choose the right charset (in particular, UTF-8 is a common default),
but if you change the charset half way through a run, then there's
certainly no way the frontend will know to interpret two window titles
sent before and after the change in two different charsets.
So, now win_set_title() and win_set_icon_title() both include a
codepage parameter along with the byte string, and it's up to them to
translate the provided window title from that encoding to whatever the
local window system expects to receive.
On Windows, that's wide-string Unicode, so we can just use the
existing dup_mb_to_wc utility function. But in GTK, it's UTF-8, so I
had to write an extra utility function to encode a wide string as
UTF-8.
Now you can turn various authentication methods on and off, so that
the server won't even offer (say) k-i or publickey at all.
This subsumes the previous -allow-none-auth option; there's now a
general -{allow,deny}-auth=foo option schema, so -allow-auth=none is
the new spelling of -allow-none-auth. The former spelling is kept for
backwards compatibility, just in case.
Similarly to cmdgen's passphrase options, this replaces the password
on the command line with a filename to read the password out of, which
means it can't show up in 'ps' or the Windows task manager.
I've moved all the results of the command-line config options into a
small struct instead of having them be local variables of main(). We
maintain an array of those structs; most command-line options modify
the last element in the array; and we respond to the new special
option '--and' by appending a fresh struct to the end of the array and
initialising it to default values.
So now, if I want two or three SSH servers running on different ports
with separately configured host keys, banners, etc, I can do that with
a single command line along the lines of:
./uppity --listen 2222 --hostkey this.ppk --bannertext "this" \
--and --listen 2223 --hostkey that.ppk --bannertext "that"
There's a single number space of connections used in log messages, and
each new connection reports which of the servers it connects to.
This is only a marginally useful feature: there's not much it does
that couldn't have been done just as well by running multiple Uppitys
each in their own process. But when I do want several servers at once
(which I've been using recently to test the jump-host system), it's
quite nice to have them all producing a single combined stream of log
data and all conveniently killable with a single ^C.
The jump host system ought really to be treating SSH authentication
banners as a distinct thing from the standard-error session output, so
that the former can be presented to the user in the same way as the
auth banner for the main session.
This change converts the 'bool is_stderr' parameter of seat_output()
into an enumerated type with three values. For the moment, stderr and
banners are treated the same, but the plan is for that to change.
Now that it's possible for a single invocation of PuTTY to connect to
multiple SSH servers (jump host followed by ultimate destination
host), it's rather unhelpful for host key prompts to just say "the
server". To check an unknown host key, users will need to know _which_
host it's purporting to be the key for.
Another possibility is to put a message in the terminal window
indicating which server we're currently in the SSH setup phase for.
That will certainly be what we have to end up doing for userpass
prompts that appear _in_ the terminal window. But that by itself is
still unhelpful for host key prompts in a separate dialog, because the
user would have to check both windows to get all the information they
need. Easier if the host key dialog itself tells you everything you
need to know to answer the question: is _this_ key the one you expect
for _that_ host?
The format _strings_ were previously centralised into the platform-
independent console.c, as const char arrays. Now the actual formatting
operation is centralised as well, by means of console.c providing a
function that takes all the necessary parameters and returns a
formatted piece of text for the console.
Mostly this is so that I can add extra parameters to the message with
some confidence: changing a format string in one file and two fprintf
statements in other files to match seems like the kind of situation
you wish you hadn't got into in the first place :-)
The system for handling seat_get_userpass_input has always been
structured differently between GUI PuTTY and CLI tools like Plink.
In the CLI tools, password input is read directly from the OS
terminal/console device by console_get_userpass_input; this means that
you need to ensure the same terminal input data _hasn't_ already been
consumed by the main event loop and sent on to the backend. This is
achieved by the backend_sendok() method, which tells the event loop
when the backend has finished issuing password prompts, and hence,
when it's safe to start passing standard input to backend_send().
But in the GUI tools, input generated by the terminal window has
always been sent straight to backend_send(), regardless of whether
backend_sendok() says it wants it. So the terminal-based
implementation of username and password prompts has to work by
consuming input data that had _already_ been passed to the backend -
hence, any backend that needs to do that must keep its input on a
bufchain, and pass that bufchain to seat_get_userpass_input.
It's awkward that these two totally different systems coexist in the
first place. And now that SSH proxying needs to present interactive
prompts of its own, it's clear which one should win: the CLI style is
the Right Thing. So this change reworks the GUI side of the mechanism
to be more similar: terminal data now goes into a queue in the Ldisc,
and is not sent on to the backend until the backend says it's ready
for it via backend_sendok(). So terminal-based userpass prompts can
now consume data directly from that queue during the connection setup
stage.
As a result, the 'bufchain *' parameter has vanished from all the
userpass_input functions (both the official implementations of the
Seat trait method, and term_get_userpass_input() to which some of
those implementations delegate). The only function that actually used
that bufchain, namely term_get_userpass_input(), now instead reads
from the ldisc's input queue via a couple of new Ldisc functions.
(Not _trivial_ functions, since input buffered by Ldisc can be a
mixture of raw bytes and session specials like SS_EOL! The input queue
inside Ldisc is a bufchain containing a fiddly binary encoding that
can represent an arbitrary interleaving of those things.)
This greatly simplifies the calls to seat_get_userpass_input in
backends, which now don't have to mess about with passing their own
user_input bufchain around, or toggling their want_user_input flag
back and forth to request data to put on to that bufchain.
But the flip side is that now there has to be some _other_ method for
notifying the terminal when there's more input to be consumed during
an interactive prompt, and for notifying the backend when prompt input
has finished so that it can proceed to the next stage of the protocol.
This is done by a pair of extra callbacks: when more data is put on to
Ldisc's input queue, it triggers a call to term_get_userpass_input,
and when term_get_userpass_input finishes, it calls a callback
function provided in the prompts_t.
Therefore, any use of a prompts_t which *might* be asynchronous must
fill in the latter callback when setting up the prompts_t. In SSH, the
callback is centralised into a common PPL helper function, which
reinvokes the same PPL's process_queue coroutine; in rlogin we have to
set it up ourselves.
I'm sorry for this large and sprawling patch: I tried fairly hard to
break it up into individually comprehensible sub-patches, but I just
couldn't tease out any part of it that would stand sensibly alone.
This is working towards allowing the subsidiary SSH connection in an
SshProxy to share the main user-facing Seat, so as to be able to pass
through interactive prompts.
This is more difficult than the similar change with LogPolicy, because
Seats are stateful. In particular, the trust-sigil status will need to
be controlled by the SshProxy until it's ready to pass over control to
the main SSH (or whatever) connection.
To make this work, I've introduced a thing called a TempSeat, which is
(yet) another Seat implementation. When a backend hands its Seat to
new_connection(), it does it in a way that allows new_connection() to
borrow it completely, and replace it in the main backend structure
with a TempSeat, which acts as a temporary placeholder. If the main
backend tries to do things like changing trust status or sending
output, the TempSeat will buffer them; later on, when the connection
is established, TempSeat will replay the changes into the real Seat.
So, in each backend, I've made the following changes:
- pass &foo->seat to new_connection, which may overwrite it with a
TempSeat.
- if it has done so (which we can tell via the is_tempseat() query
function), then we have to free the TempSeat and reinstate our main
Seat. The signal that we can do so is the PLUGLOG_CONNECT_SUCCESS
notification, which indicates that SshProxy has finished all its
connection setup work.
- we also have to remember to free the TempSeat if our backend is
disposed of without that having happened (e.g. because the
connection _doesn't_ succeed).
- in backends which have no local auth phase to worry about, ensure
we don't call seat_set_trust_status on the main Seat _before_ it
gets potentially replaced with a TempSeat. Moved some calls of
seat_set_trust_status to just after new_connection(), so that now
the initial trust status setup will go into the TempSeat (if
appropriate) and be buffered until that seat is relinquished.
In all other uses of new_connection, where we don't have a Seat
available at all, we just pass NULL.
This is NFC, because neither new_connection() nor any of its delegates
will _actually_ do this replacement yet. We're just setting up the
framework to enable it to do so in the next commit.
Now new_connection() takes an optional LogPolicy * argument, and
passes it on to the SshProxy setup. This means that SshProxy's
implementation of the LogPolicy trait can answer queries like
askappend() and logging_error() by passing them on to the same
LogPolicy used by the main backend.
Not all callers of new_connection have a LogPolicy, so we still have
to fall back to the previous conservative default behaviour if
SshProxy doesn't have a LogPolicy it can ask.
The main backend implementations didn't _quite_ have access to a
LogPolicy already, but they do have a LogContext, which has a
LogPolicy vtable pointer inside it; so I've added a query function
log_get_policy() which allows them to extract that pointer to pass to
new_connection.
This is the first step of fixing the non-interactivity limitations of
SshProxy. But it's also the easiest step: the next ones will be more
involved.
In the case where these socket types are constructed because of a
local proxy command, we do actually have a SockAddr representing the
logical host we were trying to make a connection to. So we might as
well store it in the socket implementation, and then we can include it
in the PLUGLOG_CONNECT_SUCCESS call to make the log message more
informative.
Now the non-SSH backends critically depend on it, it's important not
to forget to send it, for any socket type that's going to be used for
any of those backends. But ProxySocket, and the Unix and Windows
'socket' types wrapping pipes to local subprocesses, were not doing
so.
Some of these socket types don't have a SockAddr available to
represent the destination host. (Sometimes the concept isn't even
meaningful). Therefore, I've also expanded the semantics of
PLUGLOG_CONNECT_SUCCESS so that the addr parameter is allowed to be
NULL, and invented a noncommittal fallback version of the log message
in that situation.
The call to plug_closing very likely destroys the FdSocket entirely,
so we shouldn't wait until after that to clean up its input fd via
lots of dereferences.
This is called by the backend to notify the Seat that the connection
has progressed to the point where the main session channel (i.e. the
thing that would typically correspond to the client's stdin/stdout)
has been successfully set up.
The only Seat that implements this method nontrivially is the one in
SshProxy, which uses it as an indication that the proxied connection
to the remote host has succeeded, and sends the
PLUGLOG_CONNECT_SUCCESS notification to its own Plug.
Hence, the only backends that need to implement it at the moment are
the two SSH-shaped backends (SSH proper and bare-connection / psusan).
For other backends, it's not always obvious what 'main session
channel' would even mean, or whether it means anything very useful; so
I've also introduced a backend flag indicating whether the backend is
expecting to call that method at all, so as not to have to spend
pointless effort on defining an arbitrary meaning for it in other
contexts.
So a lot of this patch is just introducing the new method and putting
its trivial do-nothing implementation into all the existing Seat
methods. The interesting parts happen in ssh/mainchan.c (which
actually calls it), and sshproxy.c (which does something useful in
response).
On a similar theme of separating the query operation from the
attempted change, backend_send() now no longer has the side effect of
returning the current size of the send buffer. Instead, you have to
call backend_sendbuffer() every time you want to know that.
This complicates the API in one sense (more separate functions), but
in another sense, simplifies it (each function does something
simpler). When I start putting one Seat in front of another during SSH
proxying, the latter will be more important - in particular, it means
you can find out _whether_ a seat can support changing trust status
without having to actually attempt a destructive modification.
Going through all the backends' send() and sendbuffer() routines, I
noticed that the Unix pty backend is the only one where the return
value from send() doesn't match what sendbuffer() would tell you,
apparently because sendbuffer() was a stub implementation that I never
got round to filling in properly.
But pty masters _can_ back up, and if they do, we should return the
appropriate data.
Analogous to the bug I just fixed in xtruss: in the loop that tries to
find a reasonable port number for an X display, the sense of the
(horrible) strcmp distinguishing EADDRINUSE from other socket errors
was backwards.
Now that I've removed side-channel leakage from both prime candidate
generation (via mp_unsafe_mod_integer) and Miller-Rabin, the
probabilistic prime generation system in this code base is now able to
get through testsc without it detecting any source of cache or timing
side channels. So you should be able to generate an RSA key (in which
the primes themselves must be secret) in a more hostile environment
than you could previously be confident of.
This is a bit counterintuitive, because _obviously_ random prime
generation takes a variable amount of time, because it has to keep
retrying until an attempt succeeds! But that's OK as long as the
attempts are completely independent, because then any timing or cache
information leaked by a _failed_ attempt will only tell an attacker
about the numbers used in the failed attempt, and those numbers have
been thrown away, so it doesn't matter who knows them. It's only
important that the _successful_ attempt, from generating the random
candidate through to completing its verification as (probably) prime,
should be side-channel clean, because that's the attempt whose data is
actually going to be turned into a private key that needs to be kept
secret.
(In particular, this means you have to avoid the old-fashioned
strategy of generating successive prime candidates by incrementing a
starting value until you find something not divisible by any small
prime, because the number of iterations of that method would be a
timing leak. Happily, we stopped doing that last year, in commit
08a3547bc5: now every candidate integer is generated
independently, and if one fails the initial checks, we throw it away
and start completely from scratch with a fresh random value.)
So the test harness works by repeatedly running the prime generator in
one-shot mode until an attempt succeeds, and then resetting the
random-number stream to where it was just before the successful
attempt. Then we generate the same prime number again, this time with
the sclog mechanism turned on - and then, we compare it against the
version we previously generated with the same random numbers, to make
sure they're the same. This checks that the attempts really _are_
independent, in the sense that the prime generator is a pure function
of its random input stream, and doesn't depend on state left over from
previous attempts.
This is used to notify the Seat that some data has been cleared from
the backend's outgoing data buffer. In other words, it notifies the
Seat that it might be worth calling backend_sendbuffer() again.
We've never needed this before, because until now, Seats have always
been the 'main program' part of the application, meaning they were
also in control of the event loop. So they've been able to call
backend_sendbuffer() proactively, every time they go round the event
loop, instead of having to wait for a callback.
But now, the SSH proxy is the first example of a Seat without
privileged access to the event loop, so it has no way to find out that
the backend's sendbuffer has got smaller. And without that, it can't
pass that notification on to plug_sent, to unblock in turn whatever
the proxied connection might have been waiting to send.
In fact, before this commit, sshproxy.c never called plug_sent at all.
As a result, large data uploads over an SSH jump host would hang
forever as soon as the outgoing buffer filled up for the first time:
the main backend (to which sshproxy.c was acting as a Socket) would
carefully stop filling up the buffer, and then never receive the call
to plug_sent that would cause it to start again.
The new callback is ignored everywhere except in sshproxy.c. It might
be a good idea to remove backend_sendbuffer() entirely and convert all
previous uses of it into non-empty implementations of this callback,
so that we've only got one system; but for the moment, I haven't done
that.
This allows the 'no trivial auth' option introduced by the previous
commit to be tested. Uppity has grown three new options to make it
accept "none" authentication, keyboard-interactive involving no
prompts, and the perverse sending of USERAUTH_SUCCESS after a
signatureless public-key offer.
The first of those options also enables the analogue in SSH-1; the
other two have no SSH-1 analogues in the first place. (SSH-1 public
key authentication has a challenge-response structure that doesn't
contain any way to terminate the exchange early with success. And the
TIS and CryptoCard methods, which are its closest analogue of k-i,
have a fixed number of prompts, which is not 0.)
Suggested by Manfred Kaiser, who also wrote most of this patch
(although outlying parts, like documentation and SSH-1 support, are by
me).
This is a second line of defence against the kind of spoofing attacks
in which a malicious or compromised SSH server rushes the client
through the userauth phase of SSH without actually requiring any auth
inputs (passwords or signatures or whatever), and then at the start of
the connection phase it presents something like a spoof prompt,
intended to be taken for part of userauth by the user but in fact with
some more sinister purpose.
Our existing line of defence against this is the trust sigil system,
and as far as I know, that's still working. This option allows a bit of
extra defence in depth: if you don't expect your SSH server to
trivially accept authentication in the first place, then enabling this
option will cause PuTTY to disconnect if it unexpectedly does so,
without the user having to spot the presence or absence of a fiddly
little sigil anywhere.
Several types of authentication count as 'trivial'. The obvious one is
the SSH-2 "none" method, which clients always try first so that the
failure message will tell them what else they can try, and which a
server can instead accept in order to authenticate you unconditionally.
But there are two other ways to do it that we know of: one is to run
keyboard-interactive authentication and send an empty INFO_REQUEST
packet containing no actual prompts for the user, and another even
weirder one is to send USERAUTH_SUCCESS in response to the user's
preliminary *offer* of a public key (instead of sending the usual PK_OK
to request an actual signature from the key).
This new option detects all of those, by clearing the 'is_trivial_auth'
flag only when we send some kind of substantive authentication response
(be it a password, a k-i prompt response, a signature, or a GSSAPI
token). So even if there's a further path through the userauth maze we
haven't spotted, that somehow avoids sending anything substantive, this
strategy should still pick it up.
This introduces a new entry to the radio-button list of proxy types,
in which the 'Proxy host' box is taken to be the name of an SSH server
or saved session. We make an entire subsidiary SSH connection to that
host, open a direct-tcpip channel through it, and use that as the
connection over which to run the primary network connection.
The result is basically the same as if you used a local proxy
subprocess, with a command along the lines of 'plink -batch %proxyhost
-nc %host:%port'. But it's all done in-process, by having an SshProxy
object implement the Socket trait to talk to the main connection, and
implement Seat and LogPolicy to talk to its subsidiary SSH backend.
All the refactoring in recent years has got us to the point where we
can do that without both SSH instances fighting over some global
variable or unique piece of infrastructure.
From an end user perspective, doing SSH proxying in-process like this
is a little bit easier to set up: it doesn't require you to bake the
full pathname of Plink into your saved session (or to have it on the
system PATH), and the SshProxy setup function automatically turns off
SSH features that would be inappropriate in this context, such as
additional port forwardings, or acting as a connection-sharing
upstream. And it has minor advantages like getting the Event Log for
the subsidiary connection interleaved in the main Event Log, as if it
were stderr output from a proxy subcommand, without having to
deliberately configure the subsidiary Plink into verbose mode.
However, this is an initial implementation only, and it doesn't yet
support the _big_ payoff for doing this in-process, which (I hope)
will be the ability to handle interactive prompts from the subsidiary
SSH connection via the same user interface as the primary one. For
example, you might need to answer two password prompts in succession,
or (the first time you use a session configured this way) confirm the
host keys for both proxy and destination SSH servers. Comments in the
new source file discuss some design thoughts on filling in this gap.
For the moment, if the proxy SSH connection encounters any situation
where an interactive prompt is needed, it will make the safe
assumption, the same way 'plink -batch' would do. So it's at least no
_worse_ than the existing technique of putting the proxy connection in
a subprocess.
This notifies the Seat that the entire backend session has finished
and closed its network connection - or rather, that it _might_ have
done, and that the frontend should check backend_connected() if it
wasn't planning to do so already.
The existing Seat implementations haven't needed this: the GUI ones
don't actually need to do anything specific when the network
connection goes away, and the CLI ones deal with it by being in charge
of their own event loop so that they can easily check
backend_connected() at every possible opportunity in any case. But I'm
about to introduce a new Seat implementation that does need to know
this, and doesn't have any other way to get notified of it.
Less than 12 hours after 0.75 went out of the door, a user pointed out
that enabling the 'Use system colours' config option causes an
immediate NULL-dereference crash. The reason is because a chain of
calls from term_init() ends up calling back to the Windows
implementation of the palette_get_overrides() method, which responds
by trying to call functions on the static variable 'term' in window.c,
which won't be initialised until term_init() has returned.
Simple fix: palette_get_overrides() is now given a pointer to the
Terminal that it should be updating, because it can't find it out any
other way.
Now that the main source file of Plink in each platform directory has
the same name, we can put centralise the main definition of the
program in the main CMakeLists.txt, and in the platform directory,
just add the few extra modules needed to clear up platform-specific
details.
The same goes for psocks. And PSCP and PSFTP could have been moved to
the top level already - I just hadn't done it in the initial setup.
This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes
which made filenames annoying to type and to tab-complete. Also, as
with my other recent renaming sprees, I've taken the opportunity to
expand and clarify some of the names so that they're not such cryptic
abbreviations.
It's another file that should have been subdivided into lots of tiny
separate things in the utils library - especially since for some
reason I made a completely separate 'guimisc' cmake-level library for
it when there was no need.
This clears up another large pile of clutter at the top level, and in
the process, allows me to rename source files to things that don't all
have that annoying 'ssh' prefix at the top.
This applies to all of AES, SHA-1, SHA-256 and SHA-512. All those
source files previously contained multiple implementations of the
algorithm, enabled or disabled by ifdefs detecting whether they would
work on a given compiler. And in order to get advanced machine
instructions like AES-NI or NEON crypto into the output file when the
compile flags hadn't enabled them, we had to do nasty stuff with
compiler-specific pragmas or attributes.
Now we can do the detection at cmake time, and enable advanced
instructions in the more sensible way, by compile-time flags. So I've
broken up each of these modules into lots of sub-pieces: a file called
(e.g.) 'foo-common.c' containing common definitions across all
implementations (such as round constants), one called 'foo-select.c'
containing the top-level vtable(s), and a separate file for each
implementation exporting just the vtable(s) for that implementation.
One advantage of this is that it depends a lot less on compiler-
specific bodgery. My particular least favourite part of the previous
setup was the part where I had to _manually_ define some Arm ACLE
feature macros before including <arm_neon.h>, so that it would define
the intrinsics I wanted. Now I'm enabling interesting architecture
features in the normal way, on the compiler command line, there's no
need for that kind of trick: the right feature macros are already
defined and <arm_neon.h> does the right thing.
Another change in this reorganisation is that I've stopped assuming
there's just one hardware implementation per platform. Previously, the
accelerated vtables were called things like sha256_hw, and varied
between FOO-NI and NEON depending on platform; and the selection code
would simply ask 'is hw available? if so, use hw, else sw'. Now, each
HW acceleration strategy names its vtable its own way, and the
selection vtable has a whole list of possibilities to iterate over
looking for a supported one. So if someone feels like writing a second
accelerated implementation of something for a given platform - for
example, I've heard you can use plain NEON to speed up AES somewhat
even without the crypto extension - then it will now have somewhere to
drop in alongside the existing ones.
The definition of HAVE_CMAKE_H is now at the very top of the main
CMakeLists.txt, so that it applies to all objects. And the consequent
include of cmake.h is at the very top of defs.h, so that it should be
included first by everything. This way, I don't have to worry any more
that the HAVE_FOO definitions in cmake.h might accidentally have
failed to reach some part of the code.
add_platform_sources_to_library() is now called
add_sources_from_current_dir(), so that it will make sense when I use
it in subdirectories that aren't for a particular platform.
It was there because of a limitation of mkfiles.pl, which had a single
list of include directories that it used on all platforms. CMake does
not. So now there's an easier and more sensible way to have a
different header file included on Windows and Unix: call it the same
name in the two subdirectories, and rely on CMake having put the right
one of those subdirs on the include path.
This new implementation uses the same optimisation-barrier technique
that I used in various places in testsc: have a no-op function, and a
volatile function pointer pointing at it, and then call through the
function pointer, so that nothing actually happens (apart from the
physical call and return) but the compiler has to assume that
_anything_ might have happened.
Doing this just after a memset enforces that the compiler can't have
thrown away the memset, because the called function might (for
example) check that all the memory really is zero and abort if not.
I've been turning this over in my mind ever since coming up with the
technique for testsc. I think it's far more robust than the previous
smemclr technique: so much so that I'm switching to using it
_everywhere_, and no longer using platform alternatives like Windows's
SecureZeroMemory().
This is the start of the payoff for all that reorganisation (and
perhaps also from having moved to a library-based build structure in
the first place): a collection of pointless stub functions in outlying
programs, which were only there to prevent link failures, now no
longer need to be there even for that purpose.
This is a module that I'd noticed in the past was too monolithic.
There's a big pile of stub functions in uxpgnt.c that only have to be
there because the implementation of true X11 _forwarding_ (i.e.
actually managing a channel within an SSH connection), which Pageant
doesn't need, was in the same module as more general X11-related
utility functions which Pageant does need.
So I've broken up this awkward monolith. Now x11fwd.c contains only
the code that really does all go together for dealing with SSH X
forwarding: the management of an X forwarding channel (including the
vtables to make it behave as Channel at the SSH end and a Plug at the
end that connects to the local X server), and the management of
authorisation for those channels, including maintaining a tree234 of
possible auth values and verifying the one we received.
Most of the functions removed from this file have moved into the utils
subdir, and also into the utils library (i.e. further down the link
order), because they were basically just string and data processing.
One exception is x11_setup_display, which parses a display string and
returns a struct telling you everything about how to connect to it.
That talks to the networking code (it does name lookups and makes a
SockAddr), so it has to live in the network library rather than utils,
and therefore it's not in the utils subdirectory either.
The other exception is x11_get_screen_number, which it turned out
nothing called at all! Apparently the job it used to do is now done as
part of x11_setup_display. So I've just removed it completely.
Now that the new CMake build system is encouraging us to lay out the
code like a set of libraries, it seems like a good idea to make them
look more _like_ libraries, by putting things into separate modules as
far as possible.
This fixes several previous annoyances in which you had to link
against some object in order to get a function you needed, but that
object also contained other functions you didn't need which included
link-time symbol references you didn't want to have to deal with. The
usual offender was subsidiary supporting programs including misc.c for
some innocuous function and then finding they had to deal with the
requirements of buildinfo().
This big reorganisation introduces three new subdirectories called
'utils', one at the top level and one in each platform subdir. In each
case, the directory contains basically the same files that were
previously placed in the 'utils' build-time library, except that the
ones that were extremely miscellaneous (misc.c, utils.c, uxmisc.c,
winmisc.c, winmiscs.c, winutils.c) have been split up into much
smaller pieces.
A couple of actual checks were missing (elf_aux_info, sysctlbyname).
Several more were accidentally left out of cmake.h.in, meaning they
wouldn't be propagated from cmake's variable space into the actual
compilation. And a handful of checks in the C source were still using
the autotools-style 'if defined' in place of the cmake-style "it's
always 0 or 1" plain #if.
This brings various concrete advantages over the previous system:
- consistent support for out-of-tree builds on all platforms
- more thorough support for Visual Studio IDE project files
- support for Ninja-based builds, which is particularly useful on
Windows where the alternative nmake has no parallel option
- a really simple set of build instructions that work the same way on
all the major platforms (look how much shorter README is!)
- better decoupling of the project configuration from the toolchain
configuration, so that my Windows cross-building doesn't need
(much) special treatment in CMakeLists.txt
- configure-time tests on Windows as well as Linux, so that a lot of
ad-hoc #ifdefs second-guessing a particular feature's presence from
the compiler version can now be replaced by tests of the feature
itself
Also some longer-term software-engineering advantages:
- other people have actually heard of CMake, so they'll be able to
produce patches to the new build setup more easily
- unlike the old mkfiles.pl, CMake is not my personal problem to
maintain
- most importantly, mkfiles.pl was just a horrible pile of
unmaintainable cruft, which even I found it painful to make changes
to or to use, and desperately needed throwing in the bin. I've
already thrown away all the variants of it I had in other projects
of mine, and was only delaying this one so we could make the 0.75
release branch first.
This change comes with a noticeable build-level restructuring. The
previous Recipe worked by compiling every object file exactly once,
and then making each executable by linking a precisely specified
subset of the same object files. But in CMake, that's not the natural
way to work - if you write the obvious command that puts the same
source file into two executable targets, CMake generates a makefile
that compiles it once per target. That can be an advantage, because it
gives you the freedom to compile it differently in each case (e.g.
with a #define telling it which program it's part of). But in a
project that has many executable targets and had carefully contrived
to _never_ need to build any module more than once, all it does is
bloat the build time pointlessly!
To avoid slowing down the build by a large factor, I've put most of
the modules of the code base into a collection of static libraries
organised vaguely thematically (SSH, other backends, crypto, network,
...). That means all those modules can still be compiled just once
each, because once each library is built it's reused unchanged for all
the executable targets.
One upside of this library-based structure is that now I don't have to
manually specify exactly which objects go into which programs any more
- it's enough to specify which libraries are needed, and the linker
will figure out the fine detail automatically. So there's less
maintenance to do in CMakeLists.txt when the source code changes.
But that reorganisation also adds fragility, because of the trad Unix
linker semantics of walking along the library list once each, so that
cyclic references between your libraries will provoke link errors. The
current setup builds successfully, but I suspect it only just manages
it.
(In particular, I've found that MinGW is the most finicky on this
score of the Windows compilers I've tried building with. So I've
included a MinGW test build in the new-look Buildscr, because
otherwise I think there'd be a significant risk of introducing
MinGW-only build failures due to library search order, which wasn't a
risk in the previous library-free build organisation.)
In the longer term I hope to be able to reduce the risk of that, via
gradual reorganisation (in particular, breaking up too-monolithic
modules, to reduce the risk of knock-on references when you included a
module for function A and it also contains function B with an
unsatisfied dependency you didn't really need). Ideally I want to
reach a state in which the libraries all have sensibly described
purposes, a clearly documented (partial) order in which they're
permitted to depend on each other, and a specification of what stubs
you have to put where if you're leaving one of them out (e.g.
nocrypto) and what callbacks you have to define in your non-library
objects to satisfy dependencies from things low in the stack (e.g.
out_of_memory()).
One thing that's gone completely missing in this migration,
unfortunately, is the unfinished MacOS port linked against Quartz GTK.
That's because it turned out that I can't currently build it myself,
on my own Mac: my previous installation of GTK had bit-rotted as a
side effect of an Xcode upgrade, and I haven't yet been able to
persuade jhbuild to make me a new one. So I can't even build the MacOS
port with the _old_ makefiles, and hence, I have no way of checking
that the new ones also work. I hope to bring that port back to life at
some point, but I don't want it to block the rest of this change.
This will let us put two controls side by side (e.g. in disjoint
columns of a multi-col layout) and indicate that instead of the
default behaviour of aligning their top edges, their centreline (or,
even better if available, font baseline) should be aligned.
NFC: nothing uses this yet.
We never expect to be passed a NULL GtkFrontend pointer, and even if
we were, we'd have crashed several lines above this test.
It was benign, of course, but Coverity (which pointed it out) dislikes
this kind of thing on the basis that it's confusing - you ought to
either test it for NULL properly, or not at all - and I see its point.
Coverity objected to several similar cases in this code in which I'd
checked a pointer for NULL after already having done things to it. I
think all the cases are benign, in that (as the comments tersely
mention) those checks could only fail if the unifontsel system had got
_really_ confused, in which case probably some other bug would have
been on the point of manifesting anyway. But Coverity has a point
anyway: if I'm _going_ to check those values for NULL, let's check
them consistently.
Commit d851df486f deleted a #if / #else / #endif on the grounds
that the condition would now always be true, without also deleting the
code inside the #else. Happily, the then-branch ended with a return,
so it was a benign mistake - the erroneously left-in else-clause code
was unreachable. But now Coverity has pointed it out, let's remove it.
I've decided that it was a mistake to use -E as the option for adding
keys encrypted, because it's better to use it as a fingerprint type
selector for the Pageant client side. That way it works the same as
command-line PuTTYgen, and also OpenSSH ssh-add (and ssh-keygen).
What spelling(s) to use instead for the option to add keys encrypted?
Obviously, the same ones I've just decided on for Windows Pageant;
there's no sensible reason to make them different.
If the prompt got big enough to reach to the edges of the dialog box,
it looked ugly without any margins. Previously I hadn't noticed,
because the prompt text was never that big.
Now Windows Pageant has two clearly distinct dialog boxes for
requesting a key passphrase: one to use synchronously when the user
has just used the 'Add Key' GUI action, and one to use asynchronously
in response to an agent client's attempt to use a key that was loaded
encrypted.
Also fixed the wording in the asynchronous box: there were two copies
of the 'enter passphrase' instruction, one from the dialog definition
in pageant.rc file and one from the cross-platform pageant.c. Now
pageant.c doesn't format a whole user-facing message any more: it
leaves that to the platform front end to do it the way it wants.
I've also added a call to SetForegroundWindow, to try to get the
passphrase prompt into the foreground. In my experience this doesn't
actually get it the keyboard focus, which I think is deliberate on
Windows's part and there's nothing I can do about it. But at least the
user should _see_ that the prompt is there, so they can focus it
themself.
Now you can press 'i' at the host key prompt, and it will print all
the key fingerprints we know about, plus the full public key. So if
you wanted to check against a fingerprint type that wasn't the one
shown in the default prompt, you can see all the ones we've got.
Now we pass the whole set of fingerprints, and also a displayable
format for the full host public key.
NFC: this commit doesn't modify any of the host key prompts to _use_
any of the new information. That's coming next.
The callback-function API in pageant.h for key enumeration is modified
so that we pass an array of all the available fingerprints for each
key.
In Unix Pageant, that's used by the -l option to print whichever
fingerprint the user asked for. (Unfortunately, the option name -E is
already taken, so for the moment I've called it --fptype. I may
revisit that later.)
Also, when matching a key by fingerprint, we're prepared to match
against any fingerprint type we know, with disambiguating prefixes if
necessary (e.g. you can match "md5🆎12" or "sha256:Ab12". That has
to be done a bit carefully, because we match MD5 hex fingerprints
case-insensitively, but SHA256 fingerprints are case-sensitive.
These would have left the terminal in the wrong termios state, if a
batch-mode Plink was run from a terminal and had to abort the
connection due to a weak crypto primitive.
The assorted host-key and warning prompt messages have no reason to
differ between the two platforms, so let's centralise them. Also,
while I'm here, some basic support functions that are the same in both
modules.
