My bulk indentation check also turned up a lot of cases where a run-on
function call or if statement didn't have its later lines aligned
correctly relative to the open paren.
I think this is quite easy to do by getting things out of
sync (editing the first line of the function call and forgetting to
update the rest, perhaps even because you never _saw_ the rest during
a search-replace). But a few didn't quite fit into that pattern, in
particular an outright misleading case in unix/askpass.c where the
second line of a call was aligned neatly below the _wrong_ one of the
open parens on the opening line.
Restored as many alignments as I could easily find.
The test in the Pageant list box code for whether we should display
the bit count of a key was done by checking specifically for ssh_rsa
or ssh_dsa, which of course meant that it didn't catch the certified
versions of those keys.
Now there's yet another footling ssh_keyalg method that asks the
question 'is it worth displaying the bit count?', to which RSA and DSA
answer yes, and the opensshcert family delegates to its base key type,
so that RSA and DSA certified keys also answer yes.
(This isn't the same as ssh_key_public_bits(alg, blob) >= 0. All
supported public key algorithms _can_ display a bit count if called
on. But only in RSA and DSA is it configurable, and therefore worth
bothering to print in the list box.)
Also in this commit, I've fixed a bug in the certificate
implementation of public_bits, which was passing a wrongly formatted
public blob to the underlying key. (Done by factoring out the code
from opensshcert_new_shared which constructed the _correct_ public
blob, and reusing it in public_bits to do the same job.)
The text of the host key warnings was replicated in three places: the
Windows rc file, the GTK dialog setup function, and the console.c
shared between both platforms' CLI tools. Now it lives in just one
place, namely ssh/common.c where the rest of the centralised host-key
checking is done, so it'll be easier to adjust the wording in future.
This comes with some extra automation. Paragraph wrapping is no longer
done by hand in any version of these prompts. (Previously we let GTK
do the wrapping on GTK, but on Windows the resource file contained a
bunch of pre-wrapped LTEXT lines, and console.c had pre-wrapped
terminal messages.) And the dialog heights in Windows are determined
automatically based on the amount of stuff in the window.
The main idea of all this is that it'll be easier to set up more
elaborate kinds of host key prompt that deal with certificates (if,
e.g., a server sends us a certified host key which we don't trust the
CA for). But there are side benefits of this refactoring too: each
tool now reliably inserts its own appname in the prompts, and also, on
Windows the entire prompt text is copy-pastable.
Details of implementation: there's a new type SeatDialogText which
holds a set of (type, string) pairs describing the contents of a
prompt. Type codes distinguish ordinary text paragraphs, paragraphs to
be displayed prominently (like key fingerprints), the extra-bold scary
title at the top of the 'host key changed' version of the dialog, and
the various information that lives in the subsidiary 'more info' box.
ssh/common.c constructs this, and passes it to the Seat to present the
actual prompt.
In order to deal with the different UI for answering the prompt, I've
added an extra Seat method 'prompt_descriptions' which returns some
snippets of text to interpolate into the messages. ssh/common.c calls
that while it's still constructing the text, and incorporates the
resulting snippets into the SeatDialogText.
For the moment, this refactoring only affects the host key prompts.
The warnings about outmoded crypto are still done the old-fashioned
way; they probably ought to be similarly refactored to use this new
SeatDialogText system, but it's not immediately critical for the
purpose I have right now.
Partly, this just seems more sensible, since it may well vary per
platform beyond the ability of intorptr to specify. But more
immediately it means the definition of the HELPCTX macro doesn't have
to use the P() function from dialog.h, which isn't defined in any
circumstances outside the config subsystem. And I'm about to want to
put a help context well outside that subsystem.
This replaces the previous placeholder scheme of having a list of
hostname wildcards with implicit logical-OR semantics (if any wildcard
matched then the certificate would be trusted to sign for that host).
That scheme didn't allow for exceptions within a domain ('everything
in example.com except extra-high-security-machine.example.com'), and
also had no way to specify port numbers.
In the new system, you can still write a hostname wildcard by itself
in the simple case, but now those are just atomic subexpressions in a
boolean-logic domain-specific language I've made up. So if you want
multiple wildcards, you can separate them with || in a single longer
expression, and also you can use && and ! to impose exceptions on top
of that.
Full details of the expression language are in the comment at the top
of utils/cert-expr.c. It'll need documenting properly before release,
of course.
For the sake of backwards compatibility for early adopters who've
already set up configuration in the old system, I've put in some code
that will read the old MatchHosts configuration and automatically
translate it into the equivalent boolean expression (by simply
stringing together the list of wildcards with || between them).
These make a good storage format for mostly-textual data in
configuration, if it can't afford to reserve any character as a
delimiter. Assuming very few characters need to be escaped, the space
cost is lower than base64, and also you can read it by eye.
ptrlen_contains and ptrlen_contains_only are useful for checking that
a string is composed entirely of certain characters, or avoids them.
ptrlen_end makes a pointer to the byte just past the end of the
specified string. And it can be used with make_ptrlen_startend, which
makes a ptrlen out of two pointers instead of a pointer and a length.
Instead of maintaining a single sparse table mapping Unicode to the
currently selected code page, we now maintain a collection of such
tables mapping Unicode to any code page we've so far found a need to
work with, and we add code pages to that list as necessary, and never
throw them away (since there are a limited number of them).
This means that the wc_to_mb family of functions are effectively
stateless: they no longer depend on a 'struct unicode_data'
corresponding to the current terminal settings. So I've removed that
parameter from all of them.
This fills in the missing piece of yesterday's commit a216d86106:
now wc_to_mb too should be able to handle internally-implemented
character sets, by hastily making their reverse mapping table if it
doesn't already have it.
(That was only a _latent_ bug, because the only use of wc_to_mb in the
cross-platform or Windows code _did_ want to convert to the currently
selected code page, so the old strategy worked in that case. But there
was no protection against an unworkable use of it being added later.)
When the user provides a password on the PuTTY command line, via -pw
or -pwfile, the flag 'tried_once' inside cmdline_get_passwd_input() is
intended to arrange that we only try sending that password once, and
after we've sent it, we don't try again.
But this plays badly with the 'Restart Session' operation. If the
connection is lost and then restarted at user request, we _do_ want to
send that password again!
So this commit moves that static variable out into a small state
structure held by the client of cmdline_get_passwd_input. Each client
can decide how to manage that state itself.
Clients that support 'Restart Session' - i.e. just GUI PuTTY itself -
will initialise the state at the same time as instantiating the
backend, so that every time the session is restarted, we return
to (correctly) believing that we _haven't_ yet tried the password
provided on the command line.
But clients that don't support 'Restart Session' - i.e. Plink and file
transfer tools - can do the same thing that cmdline.c was doing
before: just keep the state in a static variable.
This also means that the GUI login tools will now retain the
command-line password in memory, whereas previously they'd have wiped
it out once it was used. But the other tools will still wipe and free
the password, because I've also added a 'bool restartable' flag to
cmdline_get_passwd_input to let it know when it _is_ allowed to do
that.
In the GUI tools, I don't see any way to get round that, because if
the session is restarted you _have_ to still have the password to use
again. (And you can't infer that that will never happen from the
CONF_close_on_exit setting, because that too could be changed in
mid-session.) On the other hand, I think it's not all that worrying,
because the use of either -pw or -pwfile means that a persistent copy
of your password is *already* stored somewhere, so another one isn't
too big a stretch.
(Due to the change of -pw policy in 0.77, the effect of this bug was
that an attempt to reconnect in a session set up this way would lead
to "Configured password was not accepted". In 0.76, the failure mode
was different: PuTTY would interactively prompt for the password,
having wiped it out of memory after it was used the first time round.)
Various alignments I want to do in the host CA box have shown up
deficiencies in this system, so I've reworked it a bit.
Firstly, you can now specify more than two controls to be tied
together with an align_next_to (e.g. multiple checkboxes alongside
something else).
Secondly, as well as forcing the controls to be the same height as
each other, the layout algorithm will also move the later controls
further _downward_, so that their top y positions also line up. Until
now that hasn't been necessary, because they lined up already.
In the GTK implementation of this via the Columns class, I've renamed
'columns_force_same_height' to 'columns_align_next_to', and similarly
for some of the internal fields, since the latter change makes the
previous names a misnomer.
In the Windows implementation, I found it most convenient to set this
up by following a linked list of align_next_to fields backwards. But
it won't always be convenient to initialise them that way, so I've
also written a crude normaliser that will rewrite those links into a
canonical form. But I only call that on Windows; it's unnecessary in
GTK, where the Columns class provides plenty of per-widget extra
storage so I just keep each alignment class as a circular list.
As distinct from the type of signature generated by the SSH server
itself from the host key, this lets you exclude (and by default does
exclude) the old "ssh-rsa" SHA-1 signature type from the signature of
the CA on the certificate.
This will allow the central host_ca_new function to pre-populate the
structure with default values for the fields, so that once I add more
options to CA configuration they can take their default values when
loading a saved record from a previous PuTTY version.
Now we offer the OpenSSH certificate key types in our KEXINIT host key
algorithm list, so that if the server has a certificate, they can send
it to us.
There's a new storage.h abstraction for representing a list of trusted
host CAs, and which ones are trusted to certify hosts for what
domains. This is stored outside the normal saved session data, because
the whole point of host certificates is to avoid per-host faffing.
Configuring this set of trusted CAs is done via a new GUI dialog box,
separate from the main PuTTY config box (because it modifies a single
set of settings across all saved sessions), which you can launch by
clicking a button in the 'Host keys' pane. The GUI is pretty crude for
the moment, and very much at a 'just about usable' stage right now. It
will want some polishing.
If we have no CA configured that matches the hostname, we don't offer
to receive certified host keys in the first place. So for existing
users who haven't set any of this up yet, nothing will immediately
change.
Currently, if we do offer to receive certified host keys and the
server presents one signed by a CA we don't trust, PuTTY will bomb out
unconditionally with an error, instead of offering a confirmation box.
That's an unfinished part which I plan to fix before this goes into a
release.
Certificate keys don't work the same as normal keys, so the rest of
the code is going to have to pay attention to whether a key is a
certificate, and if so, treat it differently and do cert-specific
stuff to it. So here's a collection of methods for that purpose.
With one exception, these methods of ssh_key are not expected to be
implemented at all in non-certificate key types: they should only ever
be called once you already know you're dealing with a certificate. So
most of the new method pointers can be left out of the ssh_keyalg
initialisers.
The exception is the base_key method, which retrieves the base key of
a certificate - the underlying one with the certificate stripped off.
It's convenient for non-certificate keys to implement this too, and
just return a pointer to themselves. So I've added an implementation
in nullkey.c doing that. (The returned pointer doesn't transfer
ownership; you have to use the new ssh_key_clone() if you want to keep
the base key after freeing the certificate key.)
The methods _only_ implemented in certificates:
Query methods to return the public key of the CA (for looking up in a
list of trusted ones), and to return the key id string (which exists
to be written into log files).
Obviously, we need a check_cert() method which will verify the CA's
actual signature, not to mention checking all the other details like
the principal and the validity period.
And there's another fiddly method for dealing with the RSA upgrade
system, called 'related_alg'. This is quite like alternate_ssh_id, in
that its job is to upgrade one key algorithm to a related one with
more modern RSA signing flags (or any other similar thing that might
later reuse the same mechanism). But where alternate_ssh_id took the
actual signing flags as an argument, this takes a pointer to the
upgraded base algorithm. So it answers the question "What is to this
key algorithm as you are to its base?" - if you call it on
opensshcert_ssh_rsa and give it ssh_rsa_sha512, it'll give you back
opensshcert_ssh_rsa_sha512.
(It's awkward to have to have another of these fiddly methods, and in
the longer term I'd like to try to clean up their proliferation a bit.
But I even more dislike the alternative of just going through
all_keyalgs looking for a cert algorithm with, say, ssh_rsa_sha512 as
the base: that approach would work fine now but it would be a lurking
time bomb for when all the -cert-v02@ methods appear one day. This
way, each certificate type can upgrade itself to the appropriately
related version. And at least related_alg is only needed if you _are_
a certificate key type - it's not adding yet another piece of
null-method boilerplate to the rest.)
The low-level functions to handle a single atom of base64 at a time
have been in 'utils' / misc.h for ages, but the higher-level family of
base64_encode functions that handle a whole data block were hidden
away in sshpubk.c, and there was no higher-level decode function at
all.
Now moved both into 'utils' modules and declared them in misc.h rather
than ssh.h. Also, improved the APIs: they all take ptrlen in place of
separate data and length arguments, their naming is more consistent
and more explicit (the previous base64_encode which didn't name its
destination is now base64_encode_fp), and the encode functions now
accept cpl == 0 as a special case meaning that the output base64 data
is wanted in the form of an unbroken single-line string with no
trailing \n.
This makes a second independent copy of an existing ssh_key, for
situations where one piece of code is going to want to keep it after
its current owner frees it.
In order to have it work on an arbitrary ssh_key, whether public-only
or a full public+private key pair, I've had to add an ssh_key query
method to ask whether a private key is known. I'm surprised I haven't
found a need for that before! But I suppose in most situations in an
SSH client you statically know which kind of key you're dealing with.
In this commit, I provide further functions which generate the
existing set of data types:
- key_components_add_text_pl() adds a text component, but takes a
ptrlen rather than a const char *, in case that was what you
happened to have already.
- key_components_add_uint() ends up adding an mp_int to the
structure, but takes it as input in the form of an ordinary C
integer, for the convenience of call sites which will want to do
that a lot and don't enjoy repeating the mp_int construction
boilerplate
- key_components_add_copy() takes a pointer to one of the
key_component sub-structs in an existing key_components, and copies
it into the output key_components under a new name, handling
whatever type it turns out to have.
This stores its data in the same format as the existing KCT_TEXT, but
it displays differently in puttygen --dump, expecting that the data
will be full of horrible control characters, invalid UTF-8, etc.
The displayed data is of the form b64("..."), so you get a hint about
what the encoding is, and can still paste into Python by defining the
identifier 'b64' to be base64.b64decode or equivalent.
Having recently pulled it out into its own file, I think it could also
do with a bit of tidying. In this rework:
- the substructure for a single component now has a globally visible
struct tag, so you can make a variable pointing at it, saving
verbiage in every piece of code looping over a key_components
- the 'is_mp_int' flag has been replaced with a type enum, so that
more types can be added without further upheaval
- the printing loop in cmdgen.c for puttygen --dump has factored out
the initial 'name=' prefix on each line so that it isn't repeated
per component type
- the storage format for text components is now a strbuf rather than
a plain char *, which I think is generally more useful.
Previously, the fact that "ssh-rsa" sometimes comes with two subtypes
"rsa-sha2-256" and "rsa-sha2-512" was known to three different parts
of the code - two in userauth and one in transport. Now the knowledge
of what those ids are, which one goes with which signing flags, and
which key types have subtypes at all, is centralised into a method of
the key algorithm, and all those locations just query it.
This will enable the introduction of further key algorithms that have
a parallel upgrade system.
It's a class method rather than an object method, so it doesn't allow
keys with the same algorithm to make different choices about what
flags they support. But that's not what I wanted it for: the real
purpose is to allow one key algorithm to delegate supported_flags to
another, by having its method implementation call the one from the
delegate class.
(If only C's compile/link model permitted me to initialise a field of
one global const struct variable to be a copy of that of another, I
wouldn't need the runtime overhead of this method! But object file
formats don't let you even specify that.)
Most key algorithms support no flags at all, so they all want to use
the same implementation of this method. So I've started a file of
stubs utils/nullkey.c to contain the common stub version.
If you already have a string (of potentially-binary data) in the form
of a ptrlen reference to somewhere else, and you want to keep a copy
somewhere, it's useful to copy it into a strbuf. But it takes a couple
of lines of faff to do that, and it's nicer to wrap that up into a
tiny helper function.
This commit adds that helper function strbuf_dup, and its non-movable
sibling strbuf_dup_nm for secret data. Also, gone through the existing
code and found a bunch of cases where this makes things less verbose.
We call setlocale() at the start of the function to get the current
LC_CTYPE locale, then set it to what we need during the function, and
then call setlocale() at the end to put it back again. But the middle
call is allowed to invalidate the pointer returned from the first, so
we have to save it in our own allocated storage until the end of the
function.
This bit me during development just now, and I was surprised that it
hadn't come up before! But I suppose this is one of those things
that's only _allowed_ to fail, and need not in all circumstances -
perhaps it depends on what your LC_CTYPE was set to before.
bool is dangerous in a time-safe context, because C compilers might
insert a control flow divergence to implement the implicit
normalisation of nonzero integers to 1 when you assign to a bool.
Everywhere else time-safe, I avoid using it; but smemeq has been an
exception until now, because the response to smemeq returning failure
was to do an obvious protocol-level divergence _anyway_ (like
disconnecting due to MAC mismatch).
But I'm about to want to use smemeq in a context where I use the
result _subtly_ and don't want to give away what it is, so now it's
time to get rid of that bool and have smemeq return unsigned.
They're pretty much self-contained, and don't really need to be in the
same module as sshpubk.c (which has other dependencies). Move them out
into a utils module, where pulling them in won't pull in anything else
unwanted.
Visual Studio 2022 is out, and 2019 has added a couple more version
numbers while I wasn't looking.
Also, the main web page that lists the version number mappings now
documents the wrinkle where you sometimes have to disambiguate via
_MSC_FULL_VER (and indeed has added another such case for 16.11), so I
no longer have to link to some unofficial blog post in the comment
explaining that.
(*Also*, if _MSC_FULL_VER is worth checking, then it's worth putting
in the build info!)
All the seat functions that request an interactive prompt of some kind
to the user - both the main seat_get_userpass_input and the various
confirmation dialogs for things like host keys - were using a simple
int return value, with the general semantics of 0 = "fail", 1 =
"proceed" (and in the case of seat_get_userpass_input, answers to the
prompts were provided), and -1 = "request in progress, wait for a
callback".
In this commit I change all those functions' return types to a new
struct called SeatPromptResult, whose primary field is an enum
replacing those simple integer values.
The main purpose is that the enum has not three but _four_ values: the
"fail" result has been split into 'user abort' and 'software abort'.
The distinction is that a user abort occurs as a result of an
interactive UI action, such as the user clicking 'cancel' in a dialog
box or hitting ^D or ^C at a terminal password prompt - and therefore,
there's no need to display an error message telling the user that the
interactive operation has failed, because the user already knows,
because they _did_ it. 'Software abort' is from any other cause, where
PuTTY is the first to know there was a problem, and has to tell the
user.
We already had this 'user abort' vs 'software abort' distinction in
other parts of the code - the SSH backend has separate termination
functions which protocol layers can call. But we assumed that any
failure from an interactive prompt request fell into the 'user abort'
category, which is not true. A couple of examples: if you configure a
host key fingerprint in your saved session via the SSH > Host keys
pane, and the server presents a host key that doesn't match it, then
verify_ssh_host_key would report that the user had aborted the
connection, and feel no need to tell the user what had gone wrong!
Similarly, if a password provided on the command line was not
accepted, then (after I fixed the semantics of that in the previous
commit) the same wrong handling would occur.
So now, those Seat prompt functions too can communicate whether the
user or the software originated a connection abort. And in the latter
case, we also provide an error message to present to the user. Result:
in those two example cases (and others), error messages should no
longer go missing.
Implementation note: to avoid the hassle of having the error message
in a SeatPromptResult being a dynamically allocated string (and hence,
every recipient of one must always check whether it's non-NULL and
free it on every exit path, plus being careful about copying the
struct around), I've instead arranged that the structure contains a
function pointer and a couple of parameters, so that the string form
of the message can be constructed on demand. That way, the only users
who need to free it are the ones who actually _asked_ for it in the
first place, which is a much smaller set.
(This is one of the rare occasions that I regret not having C++'s
extra features available in this code base - a unique_ptr or
shared_ptr to a string would have been just the thing here, and the
compiler would have done all the hard work for me of remembering where
to insert the frees!)
Now it's done using the same code as in write_c_string_literal(), by
means of factoring the latter into a version that targets any old
BinarySink and a convenience wrapper taking a FILE *.
At some point while setting up the utils subdirectory, I apparently
only got half way through renaming miscucs.c to dup_mb_to_wc.c: I
created the new copy of the file, but I didn't delete the old one, I
didn't mention it in utils/CMakeLists.txt, and I didn't change the
comment at the top.
Now done all three, so we now have just one copy of this utility
module.
While I'm in the mood for cleaning up the top-level directory here:
all the 'nostuff.c' files have moved into a new 'stubs' directory, and
I broke up be_misc.c into smaller modules that can live in 'utils'.
Spotted this in passing while I was adding new functions in the same
area. That 'struct strbuf;' must have been there since before I
introduced defs.h to predeclare all the structure tag names and their
typedefs. But marshal.h includes defs.h itself, so it has no reason to
worry about the possibility that the typedef 'strbuf' might not
already exist.
When I wanted to append an ordinary C string to a BinarySink, without
any prefix length field or suffix terminator, I was using the idiom
put_datapl(bs, ptrlen_from_asciz(string));
but I've finally decided that's too cumbersome, and it deserves a
shorter name. put_dataz(bs, string) now does the same thing - in fact
it's a macro expanding to exactly the above.
While I'm at it, I've also added put_datalit(), which is the same
except that it expects a C string literal (and will enforce that at
compile time, via PTRLEN_LITERAL which it calls in turn). You can use
that where possible to avoid the run-time cost of the strlen.
marshal.h now provides a macro put_fmt() which allows you to write
arbitrary printf-formatted data to an arbitrary BinarySink.
We already had this facility for strbufs in particular, in the form of
strbuf_catf(). That was able to take advantage of knowing the inner
structure of a strbuf to minimise memory allocation (it would snprintf
directly into the strbuf's existing buffer if possible). For a general
black-box BinarySink we can't do that, so instead we dupvprintf into a
temporary buffer.
For consistency, I've removed strbuf_catf, and converted all uses of
it into the new put_fmt - and I've also added an extra vtable method
in the BinarySink API, so that put_fmt can still use strbuf_catf's
more efficient memory management when talking to a strbuf, and fall
back to the simpler strategy when that's not available.
We already had bufchain_try_fetch_consume; now we also have
bufchain_try_fetch (for when you want to wait until that much data is
available but then not commit to removing it), and
bufchain_try_consume (so you can conveniently ignore a certain amount
of incoming data).
I'd added a data length to the 'type' field of output_chunk instead of
the 'size' field.
Caused an assertion failure when I tried a simple SSH proxy operation
on Windows just now, because the output_chunks and the output bufchain
didn't match up, and no wonder. The mystery is how it hasn't been
consistently failing like that since September!
(TL;DR: to suppress redundant 'Press Return to begin session' prompts
in between hops of a jump-host configuration, in Plink.)
This new query method directly asks the Seat the question: is the same
stream of input used to provide responses to interactive login
prompts, and the session input provided after login concludes?
It's used to suppress the last-ditch anti-spoofing defence in Plink of
interactively asking 'Access granted. Press Return to begin session',
on the basis that any such spoofing attack works by confusing the user
about what's a legit login prompt before the session begins and what's
sent by the server after the main session begins - so if those two
things take input from different places, the user can't be confused.
This doesn't change the existing behaviour of Plink, which was already
suppressing the antispoof prompt in cases where its standard input was
redirected from something other than a terminal. But previously it was
doing it within the can_set_trust_status() seat query, and I've now
moved it out into a separate query function.
The reason why these need to be separate is for SshProxy, which needs
to give an unusual combination of answers when run inside Plink. For
can_set_trust_status(), it needs to return whatever the parent Seat
returns, so that all the login prompts for a string of proxy
connections in session will be antispoofed the same way. But you only
want that final 'Access granted' prompt to happen _once_, after all
the proxy connection setup phases are done, because up until then
you're still in the safe hands of PuTTY itself presenting an unbroken
sequence of legit login prompts (even if they come from a succession
of different servers). Hence, SshProxy unconditionally returns 'no' to
the query of whether it has a single mixed input stream, because
indeed, it never does - for purposes of session input it behaves like
an always-redirected Plink, no matter what kind of real Seat it ends
up sending its pre-session login prompts to.
I'd forgotten that the text-only branch of seat_antispoof_msg()
constructs a string from its input in the expectation that it's a
one-line message. So it was a mistake to put a \n at the start of the
string in interactor_announce() to get a blank line first.
Now interactor_announce() makes an extra call to seat_antispoof_msg to
show its blank line, and seat_antispoof_msg itself handles the
blank-line case specially.
All this Interactor business has been gradually working towards being
able to inform the user _which_ network connection is currently
presenting them with a password prompt (or whatever), in situations
where more than one of them might be, such as an SSH connection being
used as a proxy for another SSH connection when neither one has
one-touch login configured.
At some point, we have to arrange that any attempt to do a user
interaction during connection setup - be it a password prompt, a host
key confirmation dialog, or just displaying an SSH login banner -
makes it clear which host it's come from. That's going to mean calling
some kind of announcement function before doing any of those things.
But there are several of those functions in the Seat API, and calls to
them are scattered far and wide across the SSH backend. (And not even
just there - the Rlogin backend also uses seat_get_userpass_input).
How can we possibly make sure we don't forget a vital call site on
some obscure little-tested code path, and leave the user confused in
just that one case which nobody might notice for years?
Today I thought of a trick to solve that problem. We can use the C
type system to enforce it for us!
The plan is: we invent a new struct type which contains nothing but a
'Seat *'. Then, for every Seat method which does a thing that ought to
be clearly identified as relating to a particular Interactor, we
adjust the API for that function to take the new struct type where it
previously took a plain 'Seat *'. Or rather - doing less violence to
the existing code - we only need to adjust the API of the dispatch
functions inline in putty.h.
How does that help? Because the way you _get_ one of these
struct-wrapped Seat pointers is by calling interactor_announce() on
your Interactor, which will in turn call interactor_get_seat(), and
wrap the returned pointer into one of these structs.
The effect is that whenever the SSH (or Rlogin) code wants to call one
of those particular Seat methods, it _has_ to call
interactor_announce() just beforehand, which (once I finish all of
this) will make sure the user is aware of who is presenting the prompt
or banner or whatever. And you can't forget to call it, because if you
don't call it, then you just don't have a struct of the right type to
give to the Seat method you wanted to call!
(Of course, there's nothing stopping code from _deliberately_ taking a
Seat * it already has and wrapping it into the new struct. In fact
SshProxy has to do that, in order to forward these requests up the
chain of Seats. But the point is that you can't do it _by accident_,
just by forgetting to make a vital function call - when you do that,
you _know_ you're doing it on purpose.)
No functional change: the new interactor_announce() function exists,
and the type-system trick ensures it's called in all the right places,
but it doesn't actually _do_ anything yet.
Previously, SSH authentication banners were displayed by calling the
ordinary seat_output function, and passing it a special value in the
SeatOutputType enumeration indicating an auth banner.
The awkwardness of this was already showing a little in SshProxy's
implementation of seat_output, where it had to check for that special
value and do totally different things for SEAT_OUTPUT_AUTH_BANNER and
everything else. Further work in that area is going to make it more
and more awkward if I keep the two output systems unified.
So let's split them up. Now, Seat has separate output() and banner()
methods, which each implementation can override differently if it
wants to.
All the 'end user' Seat implementations use the centralised
implementation function nullseat_banner_to_stderr(), which turns
banner text straight back into SEAT_OUTPUT_STDERR and passes it on to
seat_output. So I didn't have to tediously implement a boring version
of this function in GTK, Windows GUI, consoles, file transfer etc.
When the user tries to add a string to the CONF_ssh_manual_hostkeys
list box, we call a validation function which is supposed to look
along the string for either a valid-looking SSH key fingerprint, or a
base64 public key blob, and after it finds it, move that key alone to
the start of the input string and delete all the surrounding cruft.
SHA-256 key fingerprints were being detected all right, but not moved
to the start of the string sensibly - we just returned true without
rewriting anything. (Probably inadequate testing when I added SHA-256
fairly recently.)
And the code that moved a full public-key blob to the front of the
string triggered an ASan error on the grounds that it used strcpy with
the source and destination overlapping. I actually hadn't known that
was supposed to be a bad thing these days! But it's easily fixed by
making it a memmove instead.
Previously, checking the host key against the persistent cache managed
by the storage.h API was done as part of the seat_verify_ssh_host_key
method, i.e. separately by each Seat.
Now that check is done by verify_ssh_host_key(), which is a new
function in ssh/common.c that centralises all the parts of host key
checking that don't need an interactive prompt. It subsumes the
previous verify_ssh_manual_host_key() that checked against the Conf,
and it does the check against the storage API that each Seat was
previously doing separately. If it can't confirm or definitively
reject the host key by itself, _then_ it calls out to the Seat, once
an interactive prompt is definitely needed.
The main point of doing this is so that when SshProxy forwards a Seat
call from the proxy SSH connection to the primary Seat, it won't print
an announcement of which connection is involved unless it's actually
going to do something interactive. (Not that we're printing those
announcements _yet_ anyway, but this is a piece of groundwork that
works towards doing so.)
But while I'm at it, I've also taken the opportunity to clean things
up a bit by renaming functions sensibly. Previously we had three very
similarly named functions verify_ssh_manual_host_key(), SeatVtable's
'verify_ssh_host_key' method, and verify_host_key() in storage.h. Now
the Seat method is called 'confirm' rather than 'verify' (since its
job is now always to print an interactive prompt, so it looks more
like the other confirm_foo methods), and the storage.h function is
called check_stored_host_key(), which goes better with store_host_key
and avoids having too many functions with similar names. And the
'manual' function is subsumed into the new centralised code, so
there's now just *one* host key function with 'verify' in the name.
Several functions are reindented in this commit. Best viewed with
whitespace changes ignored.
These will typically be implemented by objects that are both a Backend
*and* a Plug, and the two methods will deliver the same results to any
caller, regardless of which facet of the object is known to that
caller.
Their purpose is to deliver a user-oriented natural-language
description of what network connection the object is handling, so that
it can appear in diagnostic messages.
The messages I specifically have in mind are going to appear in cases
where proxies require interactive authentication: when PuTTY prompts
interactively for a password, it will need to explain which *thing*
it's asking for the password for, and these descriptions are what it
will use to describe the thing in question.
Each backend is allowed to compose these messages however it thinks
best. In all cases at present, the description string is constructed
by the new centralised default_description() function, which takes a
host name and port number and combines them with the backend's display
name. But the SSH backend does things a bit differently, because it
uses the _logical_ host name (the one that goes with the SSH host key)
rather than the physical destination of the network connection. That
seems more appropriate when the question it's really helping the user
to answer is "What host am I supposed to be entering the password for?"
In this commit, no clients of the new methods are introduced. I have a
draft implementation of actually using it for the purpose I describe
above, but it needs polishing.
While fixing the previous commit I noticed that window titles don't
actually _work_ properly if you change the terminal character set,
because the text accumulated in the OSC string buffer is sent to the
TermWin as raw bytes, with no indication of what character set it
should interpret them as. You might get lucky if you happened to
choose the right charset (in particular, UTF-8 is a common default),
but if you change the charset half way through a run, then there's
certainly no way the frontend will know to interpret two window titles
sent before and after the change in two different charsets.
So, now win_set_title() and win_set_icon_title() both include a
codepage parameter along with the byte string, and it's up to them to
translate the provided window title from that encoding to whatever the
local window system expects to receive.
On Windows, that's wide-string Unicode, so we can just use the
existing dup_mb_to_wc utility function. But in GTK, it's UTF-8, so I
had to write an extra utility function to encode a wide string as
UTF-8.
I wasn't able to find the 'uniset' program mentioned in the comment
that generated one of the tables, or at least I wasn't confident that
I'd found the right thing of that name. So I rewrote the semantics of
that command line in my own Perl and have included that in the revised
version of the comment.
It doesn't actually do anything specific to the userauth layer; it's
just a helper function that deals with the mechanics of printing an
unspoofable message on various kinds of front end, and the only
parameters it needs are a Seat and a message.
Currently, it's used for 'here is the start/end of the server banner'
only. But it's also got all the right functionality to be used for the
(still missing) messages about which proxy SSH server the next set of
login prompts are going to refer to.
Working on the previous commit, I suddenly realised I'd made a mistake
in the design of TempSeat: you can't buffer standard output and
standard error separately and then replay them one after another,
because the interleaving of the two kinds of output might also be
significant. (Especially if the consuming Seat doesn't separate them.)
Now TempSeat has a single bufchain for all the data, paralleled by a
linked list describing each contiguous chunk of it consisting of a
single output type. So we can replay the data with both the correct
separation _and_ the correct order.
The jump host system ought really to be treating SSH authentication
banners as a distinct thing from the standard-error session output, so
that the former can be presented to the user in the same way as the
auth banner for the main session.
This change converts the 'bool is_stderr' parameter of seat_output()
into an enumerated type with three values. For the moment, stderr and
banners are treated the same, but the plan is for that to change.
In a GUI app, when interactive userpass input begins, the Ldisc
acquires a reference to a prompts_t. If something bad happens to the
SSH connection (e.g. unexpected server-side closure), then all the SSH
layers will be destroyed, including freeing that prompts_t. So the
Ldisc will have a stale reference to it, which it might potentially
use.
To fix that, I've arranged a back-pointer so that prompts_t itself can
find the Ldisc's reference to it, and NULL it out on free. So now,
whichever of a prompts_t and an Ldisc is freed first, the link between
them should be cleanly broken.
(I'm not 100% sure this is absolutely necessary, in the sense of
whether a sequence of events can _actually_ happen that causes a stale
pointer dereference. But I don't want to take the chance!)
Apparently in all my test runs on Linux it happened to start off
negative. But as soon as I tested on Windows, that initialised the
memory to something unhelpful.
The system for handling seat_get_userpass_input has always been
structured differently between GUI PuTTY and CLI tools like Plink.
In the CLI tools, password input is read directly from the OS
terminal/console device by console_get_userpass_input; this means that
you need to ensure the same terminal input data _hasn't_ already been
consumed by the main event loop and sent on to the backend. This is
achieved by the backend_sendok() method, which tells the event loop
when the backend has finished issuing password prompts, and hence,
when it's safe to start passing standard input to backend_send().
But in the GUI tools, input generated by the terminal window has
always been sent straight to backend_send(), regardless of whether
backend_sendok() says it wants it. So the terminal-based
implementation of username and password prompts has to work by
consuming input data that had _already_ been passed to the backend -
hence, any backend that needs to do that must keep its input on a
bufchain, and pass that bufchain to seat_get_userpass_input.
It's awkward that these two totally different systems coexist in the
first place. And now that SSH proxying needs to present interactive
prompts of its own, it's clear which one should win: the CLI style is
the Right Thing. So this change reworks the GUI side of the mechanism
to be more similar: terminal data now goes into a queue in the Ldisc,
and is not sent on to the backend until the backend says it's ready
for it via backend_sendok(). So terminal-based userpass prompts can
now consume data directly from that queue during the connection setup
stage.
As a result, the 'bufchain *' parameter has vanished from all the
userpass_input functions (both the official implementations of the
Seat trait method, and term_get_userpass_input() to which some of
those implementations delegate). The only function that actually used
that bufchain, namely term_get_userpass_input(), now instead reads
from the ldisc's input queue via a couple of new Ldisc functions.
(Not _trivial_ functions, since input buffered by Ldisc can be a
mixture of raw bytes and session specials like SS_EOL! The input queue
inside Ldisc is a bufchain containing a fiddly binary encoding that
can represent an arbitrary interleaving of those things.)
This greatly simplifies the calls to seat_get_userpass_input in
backends, which now don't have to mess about with passing their own
user_input bufchain around, or toggling their want_user_input flag
back and forth to request data to put on to that bufchain.
But the flip side is that now there has to be some _other_ method for
notifying the terminal when there's more input to be consumed during
an interactive prompt, and for notifying the backend when prompt input
has finished so that it can proceed to the next stage of the protocol.
This is done by a pair of extra callbacks: when more data is put on to
Ldisc's input queue, it triggers a call to term_get_userpass_input,
and when term_get_userpass_input finishes, it calls a callback
function provided in the prompts_t.
Therefore, any use of a prompts_t which *might* be asynchronous must
fill in the latter callback when setting up the prompts_t. In SSH, the
callback is centralised into a common PPL helper function, which
reinvokes the same PPL's process_queue coroutine; in rlogin we have to
set it up ourselves.
I'm sorry for this large and sprawling patch: I tried fairly hard to
break it up into individually comprehensible sub-patches, but I just
couldn't tease out any part of it that would stand sensibly alone.
This is working towards allowing the subsidiary SSH connection in an
SshProxy to share the main user-facing Seat, so as to be able to pass
through interactive prompts.
This is more difficult than the similar change with LogPolicy, because
Seats are stateful. In particular, the trust-sigil status will need to
be controlled by the SshProxy until it's ready to pass over control to
the main SSH (or whatever) connection.
To make this work, I've introduced a thing called a TempSeat, which is
(yet) another Seat implementation. When a backend hands its Seat to
new_connection(), it does it in a way that allows new_connection() to
borrow it completely, and replace it in the main backend structure
with a TempSeat, which acts as a temporary placeholder. If the main
backend tries to do things like changing trust status or sending
output, the TempSeat will buffer them; later on, when the connection
is established, TempSeat will replay the changes into the real Seat.
So, in each backend, I've made the following changes:
- pass &foo->seat to new_connection, which may overwrite it with a
TempSeat.
- if it has done so (which we can tell via the is_tempseat() query
function), then we have to free the TempSeat and reinstate our main
Seat. The signal that we can do so is the PLUGLOG_CONNECT_SUCCESS
notification, which indicates that SshProxy has finished all its
connection setup work.
- we also have to remember to free the TempSeat if our backend is
disposed of without that having happened (e.g. because the
connection _doesn't_ succeed).
- in backends which have no local auth phase to worry about, ensure
we don't call seat_set_trust_status on the main Seat _before_ it
gets potentially replaced with a TempSeat. Moved some calls of
seat_set_trust_status to just after new_connection(), so that now
the initial trust status setup will go into the TempSeat (if
appropriate) and be buffered until that seat is relinquished.
In all other uses of new_connection, where we don't have a Seat
available at all, we just pass NULL.
This is NFC, because neither new_connection() nor any of its delegates
will _actually_ do this replacement yet. We're just setting up the
framework to enable it to do so in the next commit.
This is called by the backend to notify the Seat that the connection
has progressed to the point where the main session channel (i.e. the
thing that would typically correspond to the client's stdin/stdout)
has been successfully set up.
The only Seat that implements this method nontrivially is the one in
SshProxy, which uses it as an indication that the proxied connection
to the remote host has succeeded, and sends the
PLUGLOG_CONNECT_SUCCESS notification to its own Plug.
Hence, the only backends that need to implement it at the moment are
the two SSH-shaped backends (SSH proper and bare-connection / psusan).
For other backends, it's not always obvious what 'main session
channel' would even mean, or whether it means anything very useful; so
I've also introduced a backend flag indicating whether the backend is
expecting to call that method at all, so as not to have to spend
pointless effort on defining an arbitrary meaning for it in other
contexts.
So a lot of this patch is just introducing the new method and putting
its trivial do-nothing implementation into all the existing Seat
methods. The interesting parts happen in ssh/mainchan.c (which
actually calls it), and sshproxy.c (which does something useful in
response).
This complicates the API in one sense (more separate functions), but
in another sense, simplifies it (each function does something
simpler). When I start putting one Seat in front of another during SSH
proxying, the latter will be more important - in particular, it means
you can find out _whether_ a seat can support changing trust status
without having to actually attempt a destructive modification.
This is used to notify the Seat that some data has been cleared from
the backend's outgoing data buffer. In other words, it notifies the
Seat that it might be worth calling backend_sendbuffer() again.
We've never needed this before, because until now, Seats have always
been the 'main program' part of the application, meaning they were
also in control of the event loop. So they've been able to call
backend_sendbuffer() proactively, every time they go round the event
loop, instead of having to wait for a callback.
But now, the SSH proxy is the first example of a Seat without
privileged access to the event loop, so it has no way to find out that
the backend's sendbuffer has got smaller. And without that, it can't
pass that notification on to plug_sent, to unblock in turn whatever
the proxied connection might have been waiting to send.
In fact, before this commit, sshproxy.c never called plug_sent at all.
As a result, large data uploads over an SSH jump host would hang
forever as soon as the outgoing buffer filled up for the first time:
the main backend (to which sshproxy.c was acting as a Socket) would
carefully stop filling up the buffer, and then never receive the call
to plug_sent that would cause it to start again.
The new callback is ignored everywhere except in sshproxy.c. It might
be a good idea to remove backend_sendbuffer() entirely and convert all
previous uses of it into non-empty implementations of this callback,
so that we've only got one system; but for the moment, I haven't done
that.
This notifies the Seat that the entire backend session has finished
and closed its network connection - or rather, that it _might_ have
done, and that the frontend should check backend_connected() if it
wasn't planning to do so already.
The existing Seat implementations haven't needed this: the GUI ones
don't actually need to do anything specific when the network
connection goes away, and the CLI ones deal with it by being in charge
of their own event loop so that they can easily check
backend_connected() at every possible opportunity in any case. But I'm
about to introduce a new Seat implementation that does need to know
this, and doesn't have any other way to get notified of it.
This clears up another large pile of clutter at the top level, and in
the process, allows me to rename source files to things that don't all
have that annoying 'ssh' prefix at the top.
Now there's a utils/CMakeLists.txt, which contains the huge list of
source files in that directory, so that the top-level file does a
better job of showing the overview.
I found these while going through the code, and decided if we're going
to have them then we should compile them. They didn't all compile
first time, proving my point :-)
I've enhanced the tree234 test so that it has a verbose option, which
by default is off.
This new implementation uses the same optimisation-barrier technique
that I used in various places in testsc: have a no-op function, and a
volatile function pointer pointing at it, and then call through the
function pointer, so that nothing actually happens (apart from the
physical call and return) but the compiler has to assume that
_anything_ might have happened.
Doing this just after a memset enforces that the compiler can't have
thrown away the memset, because the called function might (for
example) check that all the memory really is zero and abort if not.
I've been turning this over in my mind ever since coming up with the
technique for testsc. I think it's far more robust than the previous
smemclr technique: so much so that I'm switching to using it
_everywhere_, and no longer using platform alternatives like Windows's
SecureZeroMemory().
This is a module that I'd noticed in the past was too monolithic.
There's a big pile of stub functions in uxpgnt.c that only have to be
there because the implementation of true X11 _forwarding_ (i.e.
actually managing a channel within an SSH connection), which Pageant
doesn't need, was in the same module as more general X11-related
utility functions which Pageant does need.
So I've broken up this awkward monolith. Now x11fwd.c contains only
the code that really does all go together for dealing with SSH X
forwarding: the management of an X forwarding channel (including the
vtables to make it behave as Channel at the SSH end and a Plug at the
end that connects to the local X server), and the management of
authorisation for those channels, including maintaining a tree234 of
possible auth values and verifying the one we received.
Most of the functions removed from this file have moved into the utils
subdir, and also into the utils library (i.e. further down the link
order), because they were basically just string and data processing.
One exception is x11_setup_display, which parses a display string and
returns a struct telling you everything about how to connect to it.
That talks to the networking code (it does name lookups and makes a
SockAddr), so it has to live in the network library rather than utils,
and therefore it's not in the utils subdirectory either.
The other exception is x11_get_screen_number, which it turned out
nothing called at all! Apparently the job it used to do is now done as
part of x11_setup_display. So I've just removed it completely.
Now that the new CMake build system is encouraging us to lay out the
code like a set of libraries, it seems like a good idea to make them
look more _like_ libraries, by putting things into separate modules as
far as possible.
This fixes several previous annoyances in which you had to link
against some object in order to get a function you needed, but that
object also contained other functions you didn't need which included
link-time symbol references you didn't want to have to deal with. The
usual offender was subsidiary supporting programs including misc.c for
some innocuous function and then finding they had to deal with the
requirements of buildinfo().
This big reorganisation introduces three new subdirectories called
'utils', one at the top level and one in each platform subdir. In each
case, the directory contains basically the same files that were
previously placed in the 'utils' build-time library, except that the
ones that were extremely miscellaneous (misc.c, utils.c, uxmisc.c,
winmisc.c, winmiscs.c, winutils.c) have been split up into much
smaller pieces.
