testing against NULL has already been dereferenced by the time we
bother to test it, so it's a bit pointless - and in any case, no
null pointer can come to this function from any existing call site.
[originally from svn r8990]
methods left to try, it's nice to have the version of that message
going to the client contain the list of methods sent by the server.
Saves a user having to pull it out of an SSH packet log.
[originally from svn r8981]
called 'pending_close'. This deals with the situation in which we're
forwarding a port, have received and locally buffered some data from
the local endpoint but not yet been able to pass it down the SSH
connection due to window limitations, and then the local endpoint
closes its socket. In this situation what we've been doing until now
is to immediately send SSH2_MSG_CHANNEL_CLOSE, causing the data
still in our local buffer to be lost; now we instead set the new
flag, which will remind us to send SSH2_MSG_CHANNEL_CLOSE _after_ we
empty our bufchain.
Should fix at least one manifestation of 'portfwd-close', though I
don't know if it's the cause of all the reports we've ever seen.
[originally from svn r8971]
reorganises the GSSAPI support so that it handles alternative
implementations of the GSS-API. In particular, this means PuTTY can
now talk to MIT Kerberos for Windows instead of being limited to
SSPI. I don't know for sure whether further tweaking will be needed
(to the UI, most likely, or to automatic selection of credentials),
but testing reports suggest it's now at least worth committing to
trunk to get it more widely tested.
[originally from svn r8952]
today reported an SSH2_MSG_UNIMPLEMENTED from a Cisco router which
looks as if it was triggered by SSH2_MSG_IGNORE, so I'm
experimentally putting this flag in. Currently must be manually
enabled, though if it turns out to solve the user's problem then
I'll probably add at least one version string...
[Edited commit message: actually, I also committed in error a piece
of experimental code as part of this checkin. Serve me right for not
running 'svn diff' first.]
[originally from svn r8926]
which we close the socket without destroying the channel. John
Peterson reports periodic crashes under heavy load which appear to
be fixed by this, though I don't know the exact circumstances
induced by that load.
[originally from svn r8871]
out, but are now just ignored.
(We should make more effort to prevent duplicates before they get as far as
ssh_setup_portfwd() -- it's currently trivially easy to enter them in the
GUI and on the command line, let alone both -- but there's bound to be someone
with a saved session containing dupes out there by now, and anyway there are
duplicates we can't detect before getting this far, for instance
"1234:localhost:22" vs "1234:localhost:ssh".)
[originally from svn r8623]
some servers (Debian in particular seems prone to this) send a k-i packet with
no prompts and nothing to display. We were printing an extra "Using
keyboard-interactive authentication" message in this case. (Introduced by me
in r8172, I think.)
[originally from svn r8492]
[r8172 == 211fdb9f46]
s->gss_sndtok in r8326. I'm not sure it was strictly necessary, since
even if there's no send token, gss_init_sec_context() is meant to explicitly
make it empty, but it wasn't an intentional change.
[originally from svn r8337]
[r8326 == 81dafd906e]
under SSH-2, don't risk looking at the length field of an incoming packet
until we've successfully MAC'ed the packet.
This requires a change to the MAC mechanics so that we can calculate MACs
incrementally, and output a MAC for the packet so far while still being
able to add more data to the packet later.
[originally from svn r8334]
ourselves, but on Unix then assumed it was compatible with the system's
gss_buffer_desc, which wasn't the case on LP64 systems. Now, on Unix
we make Ssh_gss_buf into an alias for gss_buffer_desc, though we keep
something similar to the existing behaviour on Windows. This requires
renaming a couple of the fields in Ssh_gss_buf, and hence fixing all
the references.
Tested on Linux (MIT Kerberos) and Solaris. Compiled on NetBSD (Heimdal).
Not tested on Windows because neither mingw32 nor winegcc worked out of the
box for me. I think the Windows changes are all syntactic, though, so
if this compiles it should work no worse than before.
[originally from svn r8326]
if we have no better ideas, with UI shamelessly stolen from Quest PuTTY.
Off by default, which effectively reverts the change to using the local
username by default that came in with GSSAPI support in r8138. Anyone wanting
seamless single sign-on will need to set the new option. (The previous
default behaviour was getting in the way in ad-hoc scenarios.)
Note that the PSCP and Unix-Plink behaviour of using the local username by
default have remained unchanged throughout; they are not affected by the new
option. Not sure if that's the Right Thing.
[originally from svn r8324]
[r8138 == de5dd9d65c]
strings more rigorously, and then we look up the local X authority
data in .Xauthority _ourself_ rather than delegating to an external
xauth program. This is (negligibly) more efficient on Unix, assuming
I haven't got it wrong in some subtle way, but its major benefit is
that we can now support X authority lookups on Windows as well
provided the user points us at an appropriate X authority file in
the standard format. A new Windows-specific config option has been
added for this purpose.
[originally from svn r8305]
both directions. We had a bug report yesterday about a Cisco router
sending SSH2_MSG_UNIMPLEMENTED and it wasn't clear for which packet;
logging the sequence numbers should make such problems much easier
to diagnose.
(In fact this logging fix wouldn't have helped in yesterday's case,
because the router also didn't bother to fill in the sequence number
field in the SSH2_MSG_UNIMPLEMENTED packet! This is a precautionary
measure against the next one of these problems.)
[originally from svn r8295]
no actual prompts, we weren't displaying the former, which was wrong. We
should now (although I haven't found a server to test it against).
[originally from svn r8172]
to manually tweak the host name and port number under which the SSH
host key is read and written.
I've put it in the cross-platform Connection panel. Partly under the
flimsy pretext that other backends _can_ use it if they so wish (and
in fact it overrides the host name for title-bar purposes in all
network backends, though it has no other effect in anything but
SSH); but mostly because the SSH panel was too full already :-)
[originally from svn r8033]
We could explicitly re-enable %n, but we only use it in one place, so take
the path of least resistance and remove that single instance. This stops
dupvprintf() getting stuck in a loop (a behaviour that's caused by a workaround
for a broken libc).
<http://msdn.microsoft.com/en-us/library/ms175782(VS.80).aspx>
[originally from svn r8030]
advertise so that the server can't exceed our maximum packet size.
Enable it for "1.36_sshlib GlobalSCAPE" which apparently sends oversize
packets otherwise.
[originally from svn r7804]
as well. This won't be triggered in the usual case, but it's useful
if the remote end ignores our window, or if we're in "simple" mode and
setting the window far larger than is necessary.
[originally from svn r7756]
spurious SSH_MSG_CHANNEL_FAILUREs, treat them as the protocol errors
they are and forcibly disconnect. Inspired by recent traffic on
comp.security.ssh.
[originally from svn r7752]
a single function which also handles checking that channels exist and
are properly open. This should make PuTTY a little less tolerant of
servers that send bogus messages.
[originally from svn r7751]
performance. The theory behind this is fairly simple, though the
implementation turns out to be a little trickier than it looks.
The basic idea is that when the connection isn't being limited by our ability
to process data, we want to ensure that the window size _as seen by the server_
never drops to zero. Measuring the server's view of the window size is done
by arranging for it to acknowledge every SSH_MSG_CHANNEL_WINDOW_ADJUST, or
rather an SSH_MSG_CHANNEL_REQUEST sent just before it. That way we can tell
when it its outgoing data stream it received the window adjustment, and
thus how small the server's view of the window got.
At present, we only ever increase the window size. In theory, we could
arrange to reduce it again if the server's view of it seemed to be persistently
too large, but my experiments suggest that getting this right will be tricky.
[originally from svn r7735]
for it. It's possible that this obsoletes BUG_CHOKES_ON_RSA. Certainly
the one SSH-1.5-Cisco-1.25 server I found was correctly not advertising RSA
auth. For now, leave it in, because I'm not feeling entirely confident.
[originally from svn r7726]
because it can ever be negative, but because we'll be comparing it with
another int. This way, C's promotion rules don't bite us and we should
stand slightly more chance of coping with broken servers that overrun our
window.
[originally from svn r7683]
and tweak ssh2_set_window() so it can cope with that. Also arrange to send
a private channel message in simple mode to tell the server that it can safely
use a large window too.
[originally from svn r7679]
channel, arrange to set the SSH-2 window size to something very
large. This prevents the connection stalling when the window fills
up, and means that PSCP receives data _much_ faster.
[originally from svn r7672]
used up, rather than over half. That this increases the throughput of PSCP
by 50% indicates just how broken our window handling is.
[originally from svn r7667]
arrange to handle usefully the case where the server sends us more data
than it's allowed to. There's no danger of overflow, since the maximum is
OUR_V2_WINSIZE and the minimum is -OUR_V2_MAXPKT (at least if the server is
nice).
[originally from svn r7661]
instead of a bitfield for both. This doesn't gain much here, but it should
make it easier to make things other than logging use the context.
[originally from svn r7647]
This allows us to send data in ssh_init(), albeit at the expense of its not
being properly logged, so arrange to send the version string then if that's
sensible, which should reduce the number of round-trips required to bring
up an SSH-2 connection.
[originally from svn r7646]
the SSH-2-only case, we can send it as soon as we connect rather than waiting
for the server's one. Unfortunately, actually doing so will take a little
more effort -- there are subtleties to do with having a working log context
at the right moment that need to be sorted out.
[originally from svn r7645]
Should be no significant change in behaviour.
(Well, entering usernames containing commas on Plink's command line will be
a little harder now.)
[originally from svn r7628]
