BUG_NEEDS_SSH1_PLAIN_PASSWORD do exactly what it says on the tin, independent
of whether BUG_CHOKES_ON_SSH1_IGNORE is set.
This is invisible in the default configuration, as all servers marked as having
the second bug have the first one too, but it would allow one to manually
configure PuTTY to cope with a SSH-1 server that got upset by ignore messages
during authentication, but was fine with their use as keepalives.
[originally from svn r6876]
- changes to Logging panel
- breaks in serial backend
(Plus, completely unrelated, an index term entry related to port forwarding
which seems to have been sitting around for ages, possibly waiting for me to
think about `see also' index terms in Halibut.)
[originally from svn r6836]
there): `plink host -nc host2:port' causes the SSH connection's main
channel to be replaced with a direct-tcpip connection to the
specified destination. This feature is mainly designed for use as a
local proxy: setting your local proxy command to `plink %proxyhost
-nc %host:%port' lets you tunnel SSH over SSH with a minimum of
fuss. Works on all platforms.
[originally from svn r6823]
in place of making a network connection. This has involved a couple
of minor infrastructure changes:
- New dlg_label_change() function in the dialog.h interface, which
alters the label on a control. Only used, at present, to switch
the Host Name and Port boxes into Serial Line and Speed, which
means that any platform not implementing serial connections (i.e.
currently all but Windows) does not need to actually do anything
in this function. Yet.
- New small piece of infrastructure: cfg_launchable() determines
whether a Config structure describes a session ready to be
launched. This was previously determined by seeing if it had a
non-empty host name, but it has to check the serial line as well
so there's a centralised function for it. I haven't gone through
all front ends and arranged for this function to be used
everywhere it needs to be; so far I've only checked Windows.
- Similarly, cfg_dest() returns the destination of a connection
(host name or serial line) in a text format suitable for putting
into messages such as `Unable to connect to %s'.
[originally from svn r6815]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
that the SSH-2 server is happy with. Fixed, and since I'm here, fix
`pubkeyfile-and-pageant' as well (for SSH-1 and SSH-2).
Also, in SSH-2, we now reexamine "methods that can continue" for every
Pageant key offer, which is technically more correct although it seems
unlikely that it was causing any real problems.
(It's not entirely pretty, but neither was the old code. We could probably
do with some sort of abstraction for public/private keys to avoid carting
lots of fiddly bits of data around.)
[originally from svn r6459]
[r6437 == 8719f92c14]
[this svn revision also touched putty-wishlist]
there are servers which could in principle operate in this mode, although I
don't know if any do in practice. (Hence, I haven't been able to test it.)
[originally from svn r5748]
[this svn revision also touched putty-wishlist]
SOCKS5 should always be able to do this, and I suspect our not doing so
dates from when the SOCKS proxy types were under a single configuration
option (pre-r3168).
[originally from svn r5654]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
This was a bit rushed, and could doubtless be improved.
Also fix a couple of things I noted on the way, including:
- "pscp -ls" wasn't documented
- Windows XP wasn't mentioned enough
[originally from svn r5593]
discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol
version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com
implementations in this scheme). <http://www.snailbook.com/terms.html>
[originally from svn r5480]
disabling the former is much more useful, and much safer, than disabling the
latter. The new wording on data-based rekeys might need some polishing.
[originally from svn r5222]
deal with rekeys at all: they totally ignore mid-session KEXINIT
sent by the client. Hence, a new bug entry so we don't try it.
[originally from svn r5092]
on a local port), the `Auto' protocol option on the Tunnels panel
should always produce a port you can connect to in _either_ of IPv4
and v6, because the aim is for the user not to have to know or care
which one they're using. This was not the case on Windows, and now
is. Also, updated the docs to give more detail on issues like this.
[originally from svn r5083]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
Change Settings, the port forwarding setup function is run again,
and tags all existing port forwardings as `do not keep'. Then it
iterates through the config in the normal way; when it encounters a
port forwarding which is already in the tree, it tags it `keep'
rather than setting it up from scratch. Finally, it goes through the
tree and removes any that haven't been labelled `keep'. Hence,
editing the list of forwardings in Change Settings has the effect of
cancelling any forwardings you remove, and adding any new ones.
The SSH panel now appears in the reconfig box, and is empty apart
from a message explaining that it has to be there for subpanels of
it to exist. Better wording for this message would be welcome.
[originally from svn r5030]
(which will gain more content anon).
Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never
did find a way of automatically detecting this alleged server bug, and in any
case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW).
Also generalise askcipher() to a new askalg() (thus touching all the
front-ends).
I've made some attempt to document what SSH key exchange is and why you care,
but it could use some review for clarity (and outright lies).
[originally from svn r5022]
results in unacceptable performance for him on Win2000. Add a checkbox to
revert to the old behaviour.
[originally from svn r4988]
[this svn revision also touched putty-wishlist]
line for every single .but file at the bottom of each page of the
HTML PuTTY docs. However, we can't _always_ replace that with a
single SVN revision, because there isn't always one available (SVN
still allows mixed working copies in which some files are
deliberately checked out against a different revision).
Hence, here's a mechanism for doing better. It uses `svnversion .'
to determine _whether_ a single revision number adequately describes
the current directory, and replaces all the version IDs with that if
so. If it can't do that, it uses the version IDs as before.
Also, this allows an explicit version string to be passed on the
make command line which will override _both_ these possibilities, so
that release documentation can be clearly labelled with the release
version number.
[originally from svn r4804]
- change click-by-click advice on modifying saved sessions
- add `Restart Session' as another reason you might not want to close the
window on exit; other tweaks to this language
- mention Shift-Backspace action
- the window resizing configuration documentation was completely out of
date; rewrite
- add a note about Default Bold Background since it's caused confusion
- "remote terminal" -> "remote system" in terminal-type doc
[originally from svn r4686]
(in the Windows version), and hopefully to clarify distinction between line
charset and local font, which has occasionally foxed me.
Cross-reference the Translation panel reference section from the intro
section in using.but and mention line-drawing characters there also.
[originally from svn r4654]
into the Connection panel, and implemented support for the SSH2
"env" request. (I haven't yet found a server which accepts this
request, so although I've visually checked the packet log and it
looks OK, I haven't yet been able to do a full end-to-end test.)
Also, the `pty' backend reads this data and does a series of
`putenv' commands before launching the shell or application.
This is mostly because in last week's UTF-8 faffings I got
thoroughly sick of typing `export LANG=en_GB.UTF-8' every time I
started a new testing pterm, and it suddenly occurred to me that
this would be precisely the sort of thing you'd want to have pterm
set up for you, particularly since you can configure it alongside
the translation settings and so you can ensure they match up
properly.
[originally from svn r4645]
