behave like a pointer. In particular, the right thing to set a
HANDLE to to indicate that it's invalid is INVALID_HANDLE_VALUE, not
NULL. Crack down on sloppy use of NULL HANDLEs across all Windows
code.
(There is one oddity, which is that {Create,Open}FileMapping are
documented to return a NULL HANDLE instead of INVALID_HANDLE_VALUE
on failure. Shrug. If MS want to be inconsistent, I suppose I have
to live with it.)
[originally from svn r6833]
values one might expect, which means that GetMessage() was
occasionally blocking the process. That appears to be the last of
the annoying data loss issues, so I think the Windows serial back
end actually looks vaguely reliable now. Phew.
[originally from svn r6830]
unfriendly in an interactive session, because at 19200 baud it takes
nearly two seconds to receive that much data, and as long as the
data is flowing continuously Windows waits until it has a full
buffer. So here's another annoying flag in the winhandl API, which
restricts reads to length 1 so that serial output shows up as it
appears.
(I tried this yesterday, but without the OVERLAPPED fix in r6826 it
behaved very erratically. It now seems solid.)
[originally from svn r6827]
[r6826 == 2aedc83f8d]
there): `plink host -nc host2:port' causes the SSH connection's main
channel to be replaced with a direct-tcpip connection to the
specified destination. This feature is mainly designed for use as a
local proxy: setting your local proxy command to `plink %proxyhost
-nc %host:%port' lets you tunnel SSH over SSH with a minimum of
fuss. Works on all platforms.
[originally from svn r6823]
options, here's a slight change to the API of ser_setup_config_box()
to make it filter its parity and flow control options using
platform-supplied bit masks.
[originally from svn r6820]
in place of making a network connection. This has involved a couple
of minor infrastructure changes:
- New dlg_label_change() function in the dialog.h interface, which
alters the label on a control. Only used, at present, to switch
the Host Name and Port boxes into Serial Line and Speed, which
means that any platform not implementing serial connections (i.e.
currently all but Windows) does not need to actually do anything
in this function. Yet.
- New small piece of infrastructure: cfg_launchable() determines
whether a Config structure describes a session ready to be
launched. This was previously determined by seeing if it had a
non-empty host name, but it has to check the serial line as well
so there's a centralised function for it. I haven't gone through
all front ends and arranged for this function to be used
everywhere it needs to be; so far I've only checked Windows.
- Similarly, cfg_dest() returns the destination of a connection
(host name or serial line) in a text format suitable for putting
into messages such as `Unable to connect to %s'.
[originally from svn r6815]
a serial port backend:
- In order to do simultaneous reading and writing on the same
HANDLE, you must enable overlapped access and pass an OVERLAPPED
structure to each ReadFile and WriteFile call. This would make
sense if it were an optional thing I could do if I wanted to do
the reading and writing in the same thread, but making it
mandatory even if I'm doing them in _different_ threads is just
annoying and arbitrary.
- Serial ports occasionally return length 0 from ReadFile, for no
particularly good reason. Fortunately serial ports also don't
have a real EOF condition to speak of, so ignoring EOFs is
actually a viable response in spite of sounding utterly gross.
Hence, handle_{input,output}_new() now accept a flags parameter,
which includes a flag to enable the OVERLAPPED bureaucracy and a
flag to cause EOFs to be ignored on input handles. The current
clients of winhandl.c do not use either of these.
[originally from svn r6813]
it's NULL. Since we already have one back end (uxpty) which doesn't
in fact talk to a network socket, and may well have more soon, I'm
replacing this TCP/IP-centric function with a nice neutral
`connected' function returning a boolean. Nothing else about its
semantics has currently changed.
[originally from svn r6810]
inherit _our_ ends of its I/O pipes! Otherwise, closing our copy of
those handles does not cause it to see EOF on its stdin, because
it's holding the pipe open itself.
[originally from svn r6808]
to do something, otherwise handle_get_events will forget to tell the
front end to check for that subthread finishing. This applies even
when we're only setting `busy' to tell the subthread to terminate!
[originally from svn r6805]
of the previous ad-hockery which depended on the return value from
select_result() and hence which will not adapt sensibly to a world
in which the primary session is something local rather than a
network connection.
[originally from svn r6802]
because it gets unconditionally sfree()d in sk_addr_free(). This
just bit me when running under the MSVC debugger; not sure how it
hasn't bitten anyone until now!
[originally from svn r6800]
thread-based approach to stdin and stdout, wraps it in a halfway
sensible API, and makes it a globally available service across all
network tools.
There is no direct functionality enhancement from this checkin:
winplink.c now talks to the new API instead of doing it all
internally, but does nothing different as a result.
However, this should lay the groundwork for several diverse pieces
of work in future: pipe-based ProxyCommand on Windows, a serial port
back end, and (hopefully) a pipe-based means of communicating with
Pageant, which should have sensible blocking behaviour and hence
permit asynchronous agent requests and decrypt-on-demand.
[originally from svn r6797]
we set _FILE_OFFSET_BITS to 64 on the compiler command line (via mkfiles.pl),
and on Windows we use SetFilePointer and GetFileSize to cope with 64-bit sizes
where possible. Not tested on Win9x.
[originally from svn r6783]
Shift-hjklyubn for batch movement in NetHack, because they have
subtly different behaviour within the game and the Ctrl-moves are
more useful. Unfortunately, PuTTY's NetHack keypad mode doesn't
support Ctrl-moves. Therefore, it does now :-)
[originally from svn r6593]
- Now we've fixed `win-versioninfo', choose some sensible outcomes from
the installer's comparisons of binary version numbers. Also, give the
installer _itself_ a matching binary version.
In particular, without this change, it would not have been possible
to downgrade PuTTY -- it would have silently left the "newer" files in
place. Now it will make some fuss, but permit it.
- Also remove descriptions from shortcuts, on the grounds that the
binaries have embedded descriptions now. (Although I've not checked
whether those are actually visible in the Start Menu.)
- At the request of various people (e.g., PJB), add flags so that if
files are in use at the time the (un)installer is run, replacement is
deferred to the next restart. (The user may be prompted to restart,
which isn't ideal; see comments).
This is supposed to make centrally-pushed silent upgrades more robust.
- Note some limitations of the installer.
[originally from svn r6585]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
button tend to get disabled on login.
After a suggestion by "Tkil", change the way we handle the specials menu
to be robust against the window menu being externally modified.
[originally from svn r6546]
[this svn revision also touched putty-wishlist]
nicely elsewhere, which should fix `win64' _properly_.
Tested on recent-ish MinGW (with GetWindowLongPtr but not GetClassLongPtr),
and VC++ 6.0 with a recent SDK, but not with vanilla VC++.
[originally from svn r6535]
[this svn revision also touched putty-wishlist]
basis for other terminal-involving applications: a stub
implementation of the printing interface, an additional function in
notiming.c, and also I've renamed the front-end function beep() to
do_beep() so as not to clash with beep() in lib[n]curses.
[originally from svn r6479]
abstracted out; replace loops structured around a single interaction
per loop with less tortuous code (fixes: `ki-multiprompt-crash',
`ssh1-bad-passphrase-crash'; makes `ssh2-password-expiry' and
`proxy-password-prompt' easier).
The new interaction abstraction has a lot of fields that are unused in
the current code (things like window captions); this is groundwork for
`gui-auth'. However, ssh.c still writes directly to stderr; that may
want to be fixed.
In the GUI apps, user interaction is moved to terminal.c. This should
make it easier to fix things like UTF-8 username entry, although I
haven't attempted to do so. Also, control character filtering can be
tailored to be appropriate for individual front-ends; so far I don't
promise anything other than not having made it any worse.
I've tried to test this fairly exhaustively (although Mac stuff is
untested, as usual). It all seems to basically work, but I bet there
are new bugs. (One I know about is that you can no longer make the
PuTTY window go away with a ^D at the password prompt; this should be
fixed.)
[originally from svn r6437]
[this svn revision also touched putty-wishlist]
a VERSIONINFO resource. The versioning scheme is described in
windows/version.rc2.
Some .rc files are now #included in others. In order to keep MSVC
project files working, these have been renamed to .rc2; there may exist
a better solution.
(This checkin also includes the documentation tweak missing from r6367.)
Testing performed:
- MinGW (cross-compiler): works
- VC nmake: works (tested with VC6)
- VC project files: builds with VERSIONINFO resource (no VER variable though)
- Borland: an old version of this patch was tested with it and more or
less worked, except that some of the VERSIONINFO strings were apparently
not terminated properly. Not attempted to work around this.
- LCC: not tested. Some fixes are in there from the last time we tried
this, but then the build ultimately failed and I haven't tried this
since that was fixed.
- Dev-C++: untested. (Haven't done anything special.)
- Unix Gtk/autoconf Makefiles work as before.
[originally from svn r6374]
[r6367 == f86ad059db]
[this svn revision also touched putty-wishlist]
our app-private window messages, which is considerably higher than the
WM_XUSER we arbitrarily chose. (This isn't known to be causing any actual
problems. The fix seems not to have obviously broken anything.)
[originally from svn r6183]
[this svn revision also touched putty-wishlist]
eaten by the trailing "\f0" on the RTF preamble. The RTF spec (1.0 and 1.6)
suggests that adding a space should defuse this situation and be otherwise
harmless, and it works for me (Win98).
[originally from svn r5931]
there are servers which could in principle operate in this mode, although I
don't know if any do in practice. (Hence, I haven't been able to test it.)
[originally from svn r5748]
[this svn revision also touched putty-wishlist]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
single full-width edit box. multiedit()'s extra functionality has been
superseded by the "columns" mechanism, and it didn't allow an edit box to
be created with no label.
Also add no-label capability to a couple of other controls.
[originally from svn r5626]
we were doing a forward+reverse lookup, which seems above and beyond the
call of duty, especially given that getaddrinfo() can be persuaded to
return a canonical name (this is what unix/uxnet.c does).
Unfortunately, I'm unable to test this at all as Win98 doesn't have
getaddrinfo(); hopefully I'll be able to find a mug with a modern version
of Windows to check it's not completely broken.
I think the effects of this are mostly cosmetic -- the canonical name is
used for window titles (and some people have been annoyed at the new
behaviour), other displays, and probably also for proxy exclusions.
[originally from svn r5614]
that the global `sesslist' got out of sync with the saved-sessions submenu,
causing the latter to launch the wrong sessions.
Also, Change Settings wasn't getting a fresh session list, so if the set of
sessions had changed since session startup it wouldn't reflect that (at least
until a session was saved). Fixed (on all platforms).
Therefore, since the global sesslist didn't seem to be useful, I've got rid
of it; config.c creates one as needed, as do the frontends. (Not tried
compiling Mac changes.)
Also, we now build the saved-sessions submenu on demand on Windows and Unix.
(This should probably also be done on the Mac.)
[originally from svn r5609]
acceptable on all versions of XP. Bah. Revert to pre-r5534 format (but
keep version number as 0.0.0.0). People who've had this problem have
reported putty.mft to make it go away.
NB, putting these updated manifests alongside the executable (e.g. as
`putty.exe.manifest') is also reported to work.
[originally from svn r5604]
[r5534 == deadab0900]
[this svn revision also touched putty-wishlist]
using lcc-win32 v3.8 (compilation date Mar 2 2005 18:40:17) provided
I pass COMPAT="-DNO_IPV6 -DNO_MULTIMON" on the command line.
[originally from svn r5573]
in question vary per OS: on Windows the problem is that WM_TIMER
sometimes goes off too early, so that GetTickCount() is right and
the callback time is wrong, whereas on Unix the problem is that my
GETTICKCOUNT implementation comes from the system clock which means
it can change suddenly and non-monotonically if the sysadmin is
messing about (meaning that the timing of callbacks from GTK or
select timeouts is _more_ likely to be right than GETTICKCOUNT).
This checkin provides band-aid workarounds for both problems, which
aren't pretty but ought to at least prevent catastrophic assertion
failure.
[originally from svn r5556]
"MS NewPhonetics"), move events (arrow keys) were being doubled up,
apparently because we turned both KEYDOWN and KEYUP events into new
KEYDOWN events.
I don't claim to understand the precise effect of this patch :( but
I'm reasonably confident that it only affects IME users, and experimentally
it doesn't seem to break anything obvious, so if piaip says it makes
things better that's good enough for me :)
[originally from svn r5545]
on XP allow while still having the desired effect -- this allows removal of
some fibs.
Also, change version number to 0.0.0.0 in preparation for `win-versioninfo'
(not that we found anything that took any notice of the version number
declared here).
[originally from svn r5534]
Not tested, but it appears only to affect Glenn Maynard's r1406 code from
<20011006170741.A23470@zewt.org> and nothing else, so seems harmless enough.
[originally from svn r5533]
[r1406 == d9f7fc44bc]
* All the PuTTY tools for Windows and Unix now contain the fingerprints of
the Master Keys. The method for accessing them is crude but universal:
a new "-pgpfp" command-line option. (Except Unix PuTTYgen, which takes
"--pgpfp" just to be awkward.)
* Move the key policy discussion from putty-website/keys.html to
putty/doc/pgpkeys.but, and autogenerate the former from the latter.
Also tweak the text somewhat and include the fingerprints of the
Master Keys themselves.
(I've merged the existing autogeneration scripts into a single new
one; I've left the old scripts and keys.html around until such time
as the webmonster reviews the changes and plumbs in the new script;
he should remove the old files then.)
[originally from svn r5524]
[this svn revision also touched putty-website]
was fixed in CVS in 2000 (I think); and we now depend on MinGW much more
recent than that for various other reasons. I've tested with my current
MinGW (around 2.0.0 vintage) and the original symptoms (dodgy characters in
edit boxes) don't appear to show up.
[originally from svn r5491]
discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol
version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com
implementations in this scheme). <http://www.snailbook.com/terms.html>
[originally from svn r5480]
sessions menu (etc) can inherit listening sockets, and that this sometimes
causes trouble. Can't reproduce any problems myself, but let's only allow
inheritance when absolutely necessary -- Duplicate Session -- in which
case there's already going to be trouble with two processes trying to
listen on the same port.
[originally from svn r5468]
a few things that will faze whatever we're using currently (2.0.19 or
thereabouts?), but nothing desperately modern. (NB, the 0.57 putty.iss works
fine with 5.0.8 and the installer is even 40k smaller.)
Notable changes:
- Uninstallation now runs a variant of `putty -cleanup'. The variance is
only in the text displayed; the user is still prompted, and the default
action is (now) "keep" in both cases.
- Optionally add an icon in the Quick Launch bar.
- Make desktop item optionally for all users. (not tested)
- "Create a Start Menu group" now handled via IS' own mechanism.
[originally from svn r5423]
I wanted to get to -- "software caused connection abort" and friends --
are going to be more involved (probably requiring some cross-platform
notion of help contexts), and these ones hardly seem worth the effort.
Still, I've done it now.
Side-effect: Pageant now uses the same `hinst' and `hwnd' globals as
everything else. Tested basic functionality.
[originally from svn r5417]
still only used for the host key popups. Side-effects:
- requested_help is a winstuff.h global
- Pageant now defines winstuff.h globals
(Also, my previous fix to my improved host-key dialogs only got the "changed"
case, not the "unknown" case. Some days I shouldn't be let near a keyboard.)
[originally from svn r5415]
a separate CWD for the file requester, so that when the Open File box is not
open Pageant should stay where it was started.
(Also some other minor cleanups in this area of Pageant.)
[originally from svn r5413]
[this svn revision also touched putty-wishlist]
