This is a sweeping change applied across the whole code base by a spot
of Emacs Lisp. Now, everywhere I declare a vtable filled with function
pointers (and the occasional const data member), all the members of
the vtable structure are initialised by name using the '.fieldname =
value' syntax introduced in C99.
We were already using this syntax for a handful of things in the new
key-generation progress report system, so it's not new to the code
base as a whole.
The advantage is that now, when a vtable only declares a subset of the
available fields, I can initialise the rest to NULL or zero just by
leaving them out. This is most dramatic in a couple of the outlying
vtables in things like psocks (which has a ConnectionLayerVtable
containing only one non-NULL method), but less dramatically, it means
that the new 'flags' field in BackendVtable can be completely left out
of every backend definition except for the SUPDUP one which defines it
to a nonzero value. Similarly, the test_for_upstream method only used
by SSH doesn't have to be mentioned in the rest of the backends;
network Plugs for listening sockets don't have to explicitly null out
'receive' and 'sent', and vice versa for 'accepting', and so on.
While I'm at it, I've normalised the declarations so they don't use
the unnecessarily verbose 'struct' keyword. Also a handful of them
weren't const; now they are.
This is a general cleanup which has been overdue for some time: lots
of length fields are now the machine word type rather than the (in
practice) fixed 'int'.
Those were a reasonable abbreviation when the code almost never had to
deal with little-endian numbers, but they've crept into enough places
now (e.g. the ECC formatting) that I think I'd now prefer that every
use of the integer read/write macros was clearly marked with its
endianness.
So all uses of GET_??BIT and PUT_??BIT are now qualified. The special
versions in x11fwd.c, which used variable endianness because so does
the X11 protocol, are suffixed _X11 to make that clear, and where that
pushed line lengths over 80 characters I've taken the opportunity to
name a local variable to remind me of what that extra parameter
actually does.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
This commit includes <stdbool.h> from defs.h and deletes my
traditional definitions of TRUE and FALSE, but other than that, it's a
100% mechanical search-and-replace transforming all uses of TRUE and
FALSE into the C99-standardised lowercase spellings.
No actual types are changed in this commit; that will come next. This
is just getting the noise out of the way, so that subsequent commits
can have a higher proportion of signal.
ssh2connection.c now knows how to unmarshal the message formats for
all the channel requests we'll need to handle when we're the server
and a client sends them. Each one is translated into a call to a new
method in the Channel vtable, which is implemented by a trivial
'always fail' routine in every channel type we know about so far.
Some kinds of channel, even after they've sent EOF in both directions,
still have something to do before they initiate the CLOSE mechanism
and wind up the channel completely. For example, a session channel
with a subprocess running inside it will want to be sure to send the
"exit-status" or "exit-signal" notification, even if that happens
after bidirectional EOF of the data channels.
Previously, the SSH-2 connection layer had the standard policy that
once EOF had been both sent and received, it would start the final
close procedure. There's a method chan_want_close() by which a Channel
could vary this policy in one direction, by indicating that it wanted
the close procedure to commence after EOF was sent in only one
direction. Its parameters are a pair of booleans saying whether EOF
has been sent, and whether it's been received.
Now chan_want_close can vary the policy in the other direction as
well: if it returns FALSE even when _both_ parameters are true, the
connection layer will honour that, and not send CHANNEL_CLOSE. If it
does that, the Channel is responsible for indicating when it _does_
want close later, by calling sshfwd_initiate_close.
Each of the new subroutines corresponds to one of the channel types
for which we know how to parse a CHANNEL_OPEN, and has a collection of
parameters corresponding to the fields of that message structure.
ssh2_connection_filter_queue now confines itself to parsing the
message, calling one of those functions, and constructing an
appropriate reply message if any.
Instead of the central code in ssh2_connection_filter_queue doing both
the job of parsing the channel request and deciding whether it's
acceptable, each Channel vtable now has a method for every channel
request type we recognise.
Ian Jackson points out that the Linux kernel has a macro of this name
with the same purpose, and suggests that it's a good idea to use the
same name as they do, so that at least some people reading one code
base might recognise it from the other.
I never really thought very hard about what order FROMFIELD's
parameters should go in, and therefore I'm pleasantly surprised to
find that my order agrees with the kernel's, so I don't have to
permute every call site as part of making this change :-)
Commit 6a8b9d381, which created the Channel vtable and moved the agent
forwarding implementation of it out into agentf.c, managed to set the
rcvd_eof flag to TRUE in agentf_new(), meaning that we behave exactly
as if the first agent request was followed by an incoming EOF.
Clients outside ssh.c - all implementations of Channel - will now not
see the ssh_channel data type itself, but only a subobject of the
interface type SshChannel. All the sshfwd_* functions have become
methods in that interface type's vtable (though, wrapped in the usual
kind of macros, the call sites look identical).
This paves the way for me to split up the SSH-1 and SSH-2 connection
layers and have each one lay out its channel bookkeeping structure as
it sees fit; as long as they each provide an implementation of the
sshfwd_ method family, the types behind that need not look different.
A minor good effect of this is that the sshfwd_ methods are no longer
global symbols, so they don't have to be stubbed in Unix Pageant to
get it to compile.
There's now an interface called 'Channel', which handles the local
side of an SSH connection-layer channel, in terms of knowing where to
send incoming channel data to, whether to close the channel, etc.
Channel and the previous 'struct ssh_channel' mutually refer. The
latter contains all the SSH-specific parts, and as much of the common
logic as possible: in particular, Channel doesn't have to know
anything about SSH packet formats, or which SSH protocol version is in
use, or deal with all the fiddly stuff about window sizes - with the
exception that x11fwd.c's implementation of it does have to be able to
ask for a small fixed initial window size for the bodgy system that
distinguishes upstream from downstream X forwardings.
I've taken the opportunity to move the code implementing the detailed
behaviour of agent forwarding out of ssh.c, now that all of it is on
the far side of a uniform interface. (This also means that if I later
implement agent forwarding directly to a Unix socket as an
alternative, it'll be a matter of changing just the one call to
agentf_new() that makes the Channel to plug into a forwarding.)
