This one is triggered by the following sequence:
- fill up the terminal window with text ('ls -l /dev' or similar)
- Win+Right then Win+Up to snap to the top right quadrant
- interactively drag away from the top right quadrant with the title
bar, which returns the window to its pre-snap size.
After the snap, the window border will have been recomputed to take
account of the window size not being an integer number of character
cells. So it needs recomputing back again the next time the window
size changes to something that _is_ an integer number - which happens
(or rather, we process it in a deferred manner) at the EXITSIZEMOVE.
So that's where we need to recompute the border (again).
If you open a Windows PuTTY session and press Win+Right, Windows
auto-sizes the terminal window to cover the right-hand half of the
screen. Then if you press Win+Up it will be auto-sized again, this
time to the top right quadrant. In the second resize (if you don't
have font-based resize handling turned on), the WM_SIZE handler code
will find a path through the twisty maze of ifs on which the border
between the text and the client-area edges is not recomputed, or
invalidated, or redrawn. So you can end up with half a line of text
from the previous window size still visible at the bottom of the new
window.
Fixed by factoring out the offset-recomputation code from the large
and complicated reset_window(), so that I can call just that snippet
on the dangerous code path.
There were three separate clauses in the WM_SIZE message handler which
potentially called term_size() to resize the actual Terminal object.
Two of them (for maximisation and normal non-maximised resizing drags)
first checked if an interactive resize was in progress, and if so,
instead set the need_backend_resize, to defer the term_size call to
the end of the interactive operation. But the third, for
_un_-maximising a window, didn't have that check.
As a result, if you start with a maximised window, drag its title bar
downward from the top of the screen (which unmaximises it), and
without letting go, drag it back up again (which maximises it), the
effect would be that you'd get one call to term_size in the middle of
the drag, and a second at the end. This isn't what I intended, and it
can also cause a redraw failure in full-screen applications on the
server (such as a terminal-based text editor - I reproduced this with
emacs), in which after the second term_size the terminal doesn't
manage to redraw itself.
Now I've pulled out the common logic that was in two of those three
pieces of code (and should have been in all three) into a subroutine
wm_size_resize_term, and arranged to call that in all three cases.
This fixes the inconsistency, and also fixes the emacs redraw problem
in the edge case I describe above.
This removes code duplication between the front ends: now the terminal
itself knows when the Conf is asking it not to turn on mouse
reporting, and the front ends can assume that if the terminal asks
them to then they should just do it.
This also makes the behaviour on mid-session reconfiguration more
sensible, in both code organisation and consistent behaviour.
Previously, term_reconfig would detect that CONF_no_mouse_rep had been
*set* in mid-session, and turn off mouse reporting mode in response.
But it would do it by clearing term->xterm_mouse, which isn't how the
front end enabled and disabled that feature, so things could get into
different states from different sequences of events that should have
ended up in the same place.
Also, the terminal wouldn't re-enable mouse reporting if
CONF_no_mouse_rep was *cleared* and the currently running terminal app
had been asking for mouse reports all along. Also, it was silly to
have half the CONF_no_mouse_rep handling in term_reconfig and the
other half in the front ends.
Now it should all be sensible, and also all centralised.
term->xterm_mouse consistently tracks whether the terminal application
is _requesting_ mouse reports; term->xterm_mouse_forbidden tracks
whether the client user is vetoing them; every change to either one of
those settings triggers a call to term_update_raw_mouse_mode which
sets up the front end appropriately for the current combination.
Similarly to other recent changes, the frontend now proactively keeps
Terminal up to date with the current position and size of the terminal
window, so that escape-sequence queries can be answered immediately
from the Terminal's own internal data structures without needing a
call back to the frontend.
Mostly this has let me remove explicit window-system API calls that
retrieve the window position and size, in favour of having the front
ends listen for WM_MOVE / WM_SIZE / ConfigureNotify events and track
the position and size that way. One exception is that the window pixel
size is still requested by Seat via a callback, to put in the
wire-encoded termios settings. That won't be happening very much, so
I'm leaving it this way round for the moment.
Now terminal.c makes nearly all the decisions about what the colour
palette should actually contain: it does the job of reading the
GUI-configurable colours out of Conf, and also the job of making up
the rest of the xterm-256 palette. The only exception is that TermWin
can provide a method to override some of the default colours, which on
Windows is used to implement the 'Use system colours' config option.
This saves code overall, partly because the front ends don't have to
be able to send palette data back to the Terminal any more (the
Terminal keeps the master copy and can answer palette-query escape
sequences from its own knowledge), and also because now there's only
one copy of the xterm-256 palette setup code (previously gtkwin.c and
window.c each had their own version of it).
In this rewrite, I've also introduced a multi-layered storage system
for the palette data in Terminal. One layer contains the palette
information derived from Conf; the next contains platform overrides
(currently just Windows's 'Use system colours'); the last one contains
overrides set by escape sequences in the middle of the session. The
topmost two layers can each _conditionally_ override the ones below.
As a result, if a server-side application manually resets (say) the
default fg and bg colours in mid-session to something that works well
in a particular application, those changes won't be wiped out by a
change in the Windows system colours or the Conf, which they would
have been before. Instead, changes in Conf or the system colours alter
the lower layers of the structure, but then when palette_rebuild is
called, the upper layer continues to override them, until a palette
reset (ESC]R) or terminal reset (e.g. ESC c) removes those upper-layer
changes. This seems like a more consistent strategy, in that the same
set of configuration settings will produce the same end result
regardless of what order they were applied in.
The palette-related methods in TermWin have had a total rework.
palette_get and palette_reset are both gone; palette_set can now set a
contiguous range of colours in one go; and the new
palette_get_overrides replaces window.c's old systopalette().
There are three separate indexing schemes in use by various bits of
the PuTTY front ends, and _none_ of them was clearly documented, let
alone all in the same place. Worse, functions that looked obviously
related, like win_palette_set and win_palette_get, used different
encodings.
Now all the encodings are defined together in putty.h, with
explanation of why there are three in the first place and clear
documentation of where each one is used; terminal.c provides mapping
tables that convert between them; the terminology is consistent
throughout; and win_palette_set has been converted to use the sensible
encoding.
Again, I've replaced it with a push-based notification going in the
other direction, so that when the terminal output stream includes a
query for 'is the window minimised?', the Terminal doesn't have to
consult the TermWin, because it already knows the answer.
The GTK API I'm using here (getting a GdkEventWindowState via
GtkWidget's window-state-event) is not present in GTK 1. The API I was
previously using (gdk_window_is_viewable) _is_, but it turns out that
that API doesn't reliably give the right answer: it only checks
visibility of GDK window ancestors, not X window ancestors. So in fact
GTK 1 PuTTY/pterm was only ever _pretending_ to reliably support the
'am I minimised' terminal query. Now it won't pretend any more.
Previously, window title management happened in a bipartisan sort of
way: front ends would choose their initial window title once they knew
what host name they were connecting to, but then Terminal would
override that later if the server set the window title by escape
sequences.
Now it's all done the same way round: the Terminal object is always
where titles are invented, and they only propagate in one direction,
from the Terminal to the TermWin.
This allows us to avoid duplicating in multiple front ends the logic
for what the initial window title should be. The frontend just has to
make one initial call to term_setup_window_titles, to tell the
terminal what hostname should go in the default title (if the Conf
doesn't override even that). Thereafter, all it has to do is respond
to the TermWin title-setting methods.
Similarly, the logic that handles window-title changes as a result of
the Change Settings dialog is also centralised into terminal.c. This
involved introducing an extra term_pre_reconfig() call that each
frontend can call to modify the Conf that will be used for the GUI
configurer; that's where the code now lives that copies the current
window title into there. (This also means that GTK PuTTY now behaves
consistently with Windows PuTTY on that point; GTK's previous
behaviour was less well thought out.)
It also means there's no longer any need for Terminal to talk to the
front end when a remote query wants to _find out_ the window title:
the Terminal knows the answer already. So TermWin's get_title method
can go.
All implementations of it work by checking the line_codepage field in
the ucsdata structure that the terminal itself already has a pointer
to. Therefore, it's a totally unnecessary query function: the terminal
can check the same thing directly by inspecting that structure!
(In fact, it already _does_ do that, for the purpose of actually
deciding how to decode terminal output data. It only uses this query
function at all for the auxiliary purpose of inventing useful tty
modes to pass to the backend.)
I just happened to spot a couple of cases where I'd apparently
open-coded the dupstr() logic before writing dupstr() itself, and
never got round to replacing the long-winded version with a call to
the standard helper function.
This is mostly easy: it's just like drawing an underline, except that
you put it at a different height in the character cell. The only
question is _where_ in the character cell.
Pango, and Windows GetOutlineTextMetrics, will tell you exactly where
the font wants to have it. Following xterm, I fall back to 3/8 of the
font's ascent (above the baseline) if either of those is unavailable.
Two minor memory-leak fixes on 0.74 seem not to be needed on master:
the fix in an early exit path of pageant_add_keyfile is done already
on master in a different way, and the missing sfree(fdlist) in
uxsftp.c is in code that's been completely rewritten in the uxcliloop
refactoring.
Other minor conflicts: the rework in commit b52641644905 of
ssh1login.c collided with the change from FLAG_VERBOSE to
seat_verbose(), and master and 0.74 each added an unrelated extra
field to the end of struct SshServerConfig.
udata[uindex] is a wchar_t, so if we pass it to sprintf("%d") we
should cast it to int (because who knows what primitive integer type
that might have corresponded to otherwise). I had done this in the
first of the two sprintfs that use it, but missed the second one a few
lines further on. Spotted by Coverity.
If a terminal window closed with a popup (due to a network error,
for instance) while the mouse pointer was hidden by 'Hide mouse
pointer when typing in window', the mouse pointer could remain hidden
while over the terminal window, making it hard to navigate to the
popup.
(cherry picked from commit d9c4ce9fd8)
Now, instead of a 'const char *' in the static data segment, error
messages returned from backend setup are dynamically allocated and
freed by the caller.
This will allow me to make the messages much more specific (including
errno values and the like). However, this commit is pure refactoring:
I've _just_ changed the allocation policy, and left all the messages
alone.
If a terminal window closed with a popup (due to a network error,
for instance) while the mouse pointer was hidden by 'Hide mouse
pointer when typing in window', the mouse pointer could remain hidden
while over the terminal window, making it hard to navigate to the
popup.
This is a sweeping change applied across the whole code base by a spot
of Emacs Lisp. Now, everywhere I declare a vtable filled with function
pointers (and the occasional const data member), all the members of
the vtable structure are initialised by name using the '.fieldname =
value' syntax introduced in C99.
We were already using this syntax for a handful of things in the new
key-generation progress report system, so it's not new to the code
base as a whole.
The advantage is that now, when a vtable only declares a subset of the
available fields, I can initialise the rest to NULL or zero just by
leaving them out. This is most dramatic in a couple of the outlying
vtables in things like psocks (which has a ConnectionLayerVtable
containing only one non-NULL method), but less dramatically, it means
that the new 'flags' field in BackendVtable can be completely left out
of every backend definition except for the SUPDUP one which defines it
to a nonzero value. Similarly, the test_for_upstream method only used
by SSH doesn't have to be mentioned in the rest of the backends;
network Plugs for listening sockets don't have to explicitly null out
'receive' and 'sent', and vice versa for 'accepting', and so on.
While I'm at it, I've normalised the declarations so they don't use
the unnecessarily verbose 'struct' keyword. Also a handful of them
weren't const; now they are.
The motivation is for the SUPDUP protocol. The server may send a
signal for the terminal to reset any input buffers. After this, the
server will not know the state of the terminal, so it is required to
send its cursor position back.
Sometimes, within a switch statement, you want to declare local
variables specific to the handler for one particular case. Until now
I've mostly been writing this in the form
switch (discriminant) {
case SIMPLE:
do stuff;
break;
case COMPLICATED:
{
declare variables;
do stuff;
}
break;
}
which is ugly because the two pieces of essentially similar code
appear at different indent levels, and also inconvenient because you
have less horizontal space available to write the complicated case
handler in - particuarly undesirable because _complicated_ case
handlers are the ones most likely to need all the space they can get!
After encountering a rather nicer idiom in the LLVM source code, and
after a bit of hackery this morning figuring out how to persuade
Emacs's auto-indent to do what I wanted with it, I've decided to move
to an idiom in which the open brace comes right after the case
statement, and the code within it is indented the same as it would
have been without the brace. Then the whole case handler (including
the break) lives inside those braces, and you get something that looks
more like this:
switch (discriminant) {
case SIMPLE:
do stuff;
break;
case COMPLICATED: {
declare variables;
do stuff;
break;
}
}
This commit is a big-bang change that reformats all the complicated
case handlers I could find into the new layout. This is particularly
nice in the Pageant main function, in which almost _every_ case
handler had a bundle of variables and was long and complicated. (In
fact that's what motivated me to get round to this.) Some of the
innermost parts of the terminal escape-sequence handling are also
breathing a bit easier now the horizontal pressure on them is
relieved.
(Also, in a few cases, I was able to remove the extra braces
completely, because the only variable local to the case handler was a
loop variable which our new C99 policy allows me to move into the
initialiser clause of its for statement.)
Viewed with whitespace ignored, this is not too disruptive a change.
Downstream patches that conflict with it may need to be reapplied
using --ignore-whitespace or similar.
This was pointed out as a compiler warning when I test-built with
up-to-date clang-cl. It looks as if it would cause the IDM_FULLSCREEN
item on the system menu to be wrongly greyed/ungreyed, but in fact I
think it's benign, because MF_BYCOMMAND == 0. So it's _just_ a
warning fix, luckily!
(cherry picked from commit 213723a718)
The do_select function is called with a boolean parameter indicating
whether we're supposed to start or stop paying attention to network
activity on a given socket. So if we freeze and unfreeze the socket in
mid-session because of backlog, we'll call do_select(s, false) to
freeze it, and do_select(s, true) to unfreeze it.
But the implementation of do_select in the Windows SFTP code predated
the rigorous handling of socket backlogs, so it assumed that
do_select(s, true) would only be called at initialisation time, i.e.
only once, and therefore that it was safe to use that flag as a cue to
set up the Windows event object to associate with socket activity.
Hence, every time the socket was frozen and unfrozen, we would create
a new netevent at unfreeze time, leaking the old one.
I think perhaps part of the reason why that was hard to figure out was
that the boolean parameter was called 'startup' rather than 'enable'.
To make it less confusing the next time I read this code, I've also
renamed it, and while I was at it, adjusted another related comment.
(cherry picked from commit bd5c957e5b)
In the previous trawl of this, I didn't bother with the statics in
main-program modules, on the grounds that my main aim was to avoid
'library' objects (shared between multiple programs) from polluting
the global namespace. But I think it's worth being more strict after
all, so this commit adds 'static' to a lot more file-scope variables
that aren't needed outside their own module.
Now it's no longer used, we can get rid of it, and better still, get
rid of every #define PUTTY_DO_GLOBALS in the many source files that
previously had them.
We now have no remaining things in header files that switch from being
a declaration to a definition depending on an awkward #define at the
point of including that header. There are still a few mutable
variables with external linkage, but at least now each one is defined
in a specific source file file appropriate to its purpose and context.
The remaining globals as of this commit were:
- 'logctx' and 'term', which never needed to be globals in the first
place, because they were never actually shared between source
files. Now 'term' is just a static in window.c, and 'logctx' is a
static in each of that and winplink.c.
- 'hinst', which still has external linkage, but is now defined
separately in each source file that sets it up (i.e. those with a
WinMain)
- osMajorVersion, osMinorVersion and osPlatformId, whose definitions
now live in winmisc.c alongside the code which sets them up.
(Actually they were defined there all along, it turns out, but
every toolchain I've built with has commoned them together with the
version defined by the GLOBAL in the header.)
- 'hwnd', which nothing was actually _using_ any more after previous
commits, so all this commit had to do was delete it.
This was the difficult part of cleaning up that global variable. The
main Windows PuTTY GUI is split between source files, so that _does_
actually need to refer to the main window from multiple places.
But all the places where windlg.c needed to use 'hwnd' are seat
methods, so they were already receiving a Seat pointer as a parameter.
In other words, the methods of the Windows GUI Seat were already split
between source files. So it seems only fair that they should be able
to share knowledge of the seat's data as well.
Hence, I've created a small 'WinGuiSeat' structure which both window.c
and windlg.c can see the layout of, and put the main terminal window
handle in there. Then the seat methods implemented in windlg.c, like
win_seat_verify_ssh_host_key, can use container_of to turn the Seat
pointer parameter back into the address of that structure, just as the
methods in window.c can do (even though they currently don't need to).
(Who knows: now that it _exists_, perhaps that structure can be
gradually expanded in future to turn it into a proper encapsulation of
all the Windows frontend's state, like we should have had all
along...)
I've also moved the Windows GUI LogPolicy implementation into the same
object (i.e. WinGuiSeat implements both traits at once). That allows
win_gui_logging_error to recover the same WinGuiSeat from its input
LogPolicy pointer, which means it can get from there to the Seat facet
of the same object, so that I don't need the extern variable
'win_seat' any more either.
The GUI version of pgp_fingerprints() is now a differently named
function that takes a parent HWND as a parameter, and so does my
help-enabled wrapper around MessageBox.
It's now a static in the main source file of each application that
uses it, and isn't accessible from any other source file unless the
main one passes it by reference.
In fact, there were almost no instances of the latter: only the
config-box functions in windlg.c were using 'conf' by virtue of its
globalness, and it's easy to make those take it as a parameter.
It's silly to set it at each call site of restrict_process_acl() if
that function returns success! More sensible to have it be a flag in
the same source file as restrict_process_acl(), set as an automatic
_side effect_ of success.
I've renamed the variable itself, and the global name 'restricted_acl'
is now a query function that asks winsecur.c whether that operation
has been (successfully) performed.
These global variables are only ever used by load_settings, which uses
them to vary the default protocol and port number in the absence of
any specification elsewhere. So there's no real need for them to be
universally accessible via the awkward GLOBAL mechanism: they can be
statics inside settings.c, with accessor functions that can set them.
That was the last GLOBAL in putty.h, so I've removed the definition of
the macro GLOBAL itself as well. There are still some GLOBALs in the
Windows subdirectory, though.
Another ugly mutable global variable gone: now, instead of this
variable being defined in cmdline.c and written to by everyone's
main(), it's defined _alongside_ everyone's main() as a constant, and
cmdline.c just refers to it.
A bonus is that now nocmdline.c doesn't have to define it anyway for
tools that don't use cmdline.c. But mostly, it didn't need to be
mutable, so better for it not to be.
While I'm at it, I've also fiddled with the bit flags that go in it,
to define their values automatically using a list macro instead of
manually specifying each one to be a different power of 2.
This is another piece of the old 2003 attempt at async agent requests.
Nothing ever calls this function (in particular, the new working
version of async-agent doesn't need it). Remove it completely, and all
its special-window-message implementations too.
(If we _were_ still using this function, then it would surely be
possible to fold it into the more recently introduced general
toplevel-callback system, and get rid of all this single-use special
code. But we're not, so removing it completely is even easier.)
In particular, this system was the only reason why Windows Plink paid
any attention to its message queue. So now I can make it call plain
WaitForMultipleObjects instead of MsgWaitForMultipleObjects.
The global 'int flags' has always been an ugly feature of this code
base, and I suddenly thought that perhaps it's time to start throwing
it out, one flag at a time, until it's totally unused.
My first target is FLAG_VERBOSE. This was usually set by cmdline.c
when it saw a -v option on the program's command line, except that GUI
PuTTY itself sets it unconditionally on startup. And then various bits
of the code would check it in order to decide whether to print a given
message.
In the current system of front-end abstraction traits, there's no
_one_ place that I can move it to. But there are two: every place that
checked FLAG_VERBOSE has access to either a Seat or a LogPolicy. So
now each of those traits has a query method for 'do I want verbose
messages?'.
A good effect of this is that subsidiary Seats, like the ones used in
Uppity for the main SSH server module itself and the server end of
shell channels, now get to have their own verbosity setting instead of
inheriting the one global one. In fact I don't expect any code using
those Seats to be generating any messages at all, but if that changes
later, we'll have a way to control it. (Who knows, perhaps logging in
Uppity might become a thing.)
As part of this cleanup, I've added a new flag to cmdline_tooltype,
called TOOLTYPE_NO_VERBOSE_OPTION. The unconditionally-verbose tools
now set that, and it has the effect of making cmdline.c disallow -v
completely. So where 'putty -v' would previously have been silently
ignored ("I was already verbose"), it's now an error, reminding you
that that option doesn't actually do anything.
Finally, the 'default_logpolicy' provided by uxcons.c and wincons.c
(with identical definitions) has had to move into a new file of its
own, because now it has to ask cmdline.c for the verbosity setting as
well as asking console.c for the rest of its methods. So there's a new
file clicons.c which can only be included by programs that link
against both cmdline.c _and_ one of the *cons.c, and I've renamed the
logpolicy to reflect that.
This was pointed out as a compiler warning when I test-built with
up-to-date clang-cl. It looks as if it would cause the IDM_FULLSCREEN
item on the system menu to be wrongly greyed/ungreyed, but in fact I
think it's benign, because MF_BYCOMMAND == 0. So it's _just_ a
warning fix, luckily!
Windows Plink and PSFTP had very similar implementations, and now they
share one that lives in a new file winselcli.c. I've similarly moved
GUI PuTTY's implementation out of window.c into winselgui.c, where
other GUI programs wanting to do networking will be able to access
that too.
In the spirit of centralisation, I've also taken the opportunity to
make both functions use the reasonably complete winsock_error_string()
rather than (for some historical reason) each inlining a minimal
version that reports most errors as 'unknown'.
The do_select function is called with a boolean parameter indicating
whether we're supposed to start or stop paying attention to network
activity on a given socket. So if we freeze and unfreeze the socket in
mid-session because of backlog, we'll call do_select(s, false) to
freeze it, and do_select(s, true) to unfreeze it.
But the implementation of do_select in the Windows SFTP code predated
the rigorous handling of socket backlogs, so it assumed that
do_select(s, true) would only be called at initialisation time, i.e.
only once, and therefore that it was safe to use that flag as a cue to
set up the Windows event object to associate with socket activity.
Hence, every time the socket was frozen and unfrozen, we would create
a new netevent at unfreeze time, leaking the old one.
I think perhaps part of the reason why that was hard to figure out was
that the boolean parameter was called 'startup' rather than 'enable'.
To make it less confusing the next time I read this code, I've also
renamed it, and while I was at it, adjusted another related comment.
The number of people has been steadily increasing who read our source
code with an editor that thinks tab stops are 4 spaces apart, as
opposed to the traditional tty-derived 8 that the PuTTY code expects.
So I've been wondering for ages about just fixing it, and switching to
a spaces-only policy throughout the code. And I recently found out
about 'git blame -w', which should make this change not too disruptive
for the purposes of source-control archaeology; so perhaps now is the
time.
While I'm at it, I've also taken the opportunity to remove all the
trailing spaces from source lines (on the basis that git dislikes
them, and is the only thing that seems to have a strong opinion one
way or the other).
Apologies to anyone downstream of this code who has complicated patch
sets to rebase past this change. I don't intend it to be needed again.
The RESIZE_EITHER resizing mode responds to a window resize by
changing the logical terminal size if the window is shown normally, or
by changing the font size to keep the terminal size the same if the
resize is a transition between normal and maximised state.
But a user pointed out that it's also possible for a window to receive
a WM_SIZE message while _remaining_ in maximised state, and that
PuTTY's resize logic didn't allow for that possibility. It occurs when
there's a change in the amount of available screen space for the
window to be maximised _in_: e.g. when the video resolution is
reconfigured, or when you reconnect to a Remote Desktop session using
a client window of a different size, or even when you toggle the
'Automatically hide the taskbar' option in the Windows taskbar settings.
In that situation, the right thing seems to be for PuTTY to continue
to go with the policy of changing the font size rather than the
logical terminal size. In other words, we prefer to change the font
size when the resize is _from_ maximised state, _to_ maximised state,
_or both_.
That's easily implemented by removing the check of the 'was_zoomed'
flag, in the case where we've received a WM_SIZE message with the
state SIZE_MAXIMIZED: once we know the transition is _to_ maximised
state, it doesn't matter whether or not it was also _from_ it. (But we
still set the was_zoomed flag to the most recent maximised status, so
that we can recognise transitions _out_ of maximised mode.)
The functions that previously lived in it now live in terminal.c
itself; they've been renamed term_keyinput and term_keyinputw, and
their function is to add data to the terminal's user input buffer from
a char or wchar_t string respectively.
They sit more comfortably in terminal.c anyway, because their whole
point is to translate into the character encoding that the terminal is
currently configured to use. Also, making them part of the terminal
code means they can also take care of calling term_seen_key_event(),
which simplifies most of the call sites in the GTK and Windows front
ends.
Generation of text _inside_ terminal.c, from responses to query escape
sequences, is therefore not done by calling those external entry
points: we send those responses directly to the ldisc, so that they
don't count as keypresses for all the user-facing purposes like bell
overload handling and scrollback reset. To make _that_ convenient,
I've arranged that most of the code that previously lived in
lpage_send and luni_send is now in separate translation functions, so
those can still be called from situations where you're not going to do
the default thing with the translated data.
(However, pasted data _does_ still count as close enough to a keypress
to call term_seen_key_event - but it clears the 'interactive' flag
when the data is passed on to the line discipline, which tweaks a
minor detail of control-char handling in line ending mode but mostly
just means pastes aren't interrupted.)
The recent rewriting in both the GTK and Windows keyboard handlers
left the keypad 'Enter' key in a bad state, when no override is
enabled that causes it to generate an escape sequence.
On Windows, a series of fallbacks was causing it to generate \r
regardless of configuration, whereas in Telnet mode it should default
to generating the special Telnet new-line sequence, and in response to
ESC[20h (enabling term->cr_lf_return) it should generate \r\n.
On GTK, it wasn't generating anything _at all_, and also, I can't see
any evidence that the GTK keyboard handler had ever remembered to
implement the cr_lf_return mode.
Now Keypad Enter in non-escape-sequence mode should behave just like
Return, on both platforms.
TranslateKey() on Windows passed all numeric-keypad key events to this
function in terminal.c, and accepted whatever it gave back. That
included the handling for the trivial case of the numeric keypad, when
Num Lock is on and application keypad mode hasn't overridden it, so
that the keypad should be returning actual digits. In that case,
format_numeric_keypad_key() itself was returning the same ASCII
character I had passed in to it as a keypad identifier, and
TranslateKey was returning that in turn as the final translation.
Unfortunately, that means that with Num Lock on, the numeric keypad
translates into what _I_ used as the logical keypad codes inside the
source code, not what the local keyboard layout thinks are the right
codes. In particular, the key I identified as keypad '.' would render
as '.' even on a German keyboard where it ought to produce ','.
Fixed by removing the fallback case in format_numeric_keypad_key()
itself, so now it returns the empty string if it didn't produce an
escape sequence as its translation. Instead, the special case is in
window.c, which checks for a zero-length output string and handles it
by falling through to the keyboard-layout specific ToUnicode code
further down TranslateKey().
On the GTK side, no change is needed here: the GTK keyboard handler
does things in the opposite order, by trying the local input method
_first_ (unless it can see a reason up front to override it), and only
calling format_numeric_keypad_key() if that didn't provide a
translation. So the fallback ASCII translation in the latter was
already not used.
Re-consider the icon in light of the font size, so that we pick the icon
whose size mostly closely matches the terminal font, rather than always
scaling the default icon.
In my eagerness to make sure we didn't _accidentally_ change the
seat's trust status back to trusted at any point, I forgot to do it on
purpose if a second SSH login phase is legitimately run in the same
terminal after the first session has ended.
