Tim Kosse points out that we now support some combinations of crypto
primitives which break the hardwired assumption that two blocks of
hash output from the session-key derivation algorithm are sufficient
to key every cipher and MAC in the system.
So now ssh2_mkkey is given the desired key length, and performs as
many iterations as necessary.
The key derivation code has been assuming (though non-critically, as
it happens) that the size of the MAC output is the same as the size of
the MAC key. That isn't even a good assumption for the HMAC family,
due to HMAC-SHA1-96 and also the bug-compatible versions of HMAC-SHA1
that only use 16 bytes of key material; so now we have an explicit
key-length field separate from the MAC-length field.
A user reports that in a particular situation one of the calls to
LoadLibrary from wingss.c has unwanted side effects, and points out
that this happens even when the saved session has GSSAPI disabled. So
I've evaluated as much as possible of the condition under which we
check the results of GSS library loading, and deferred the library
loading itself until after that condition says we even care about the
results.
If a sharing downstream disconnected while we were still in userauth
(probably by deliberate user action, since such a downstream would
have just been sitting there waiting for upstream to be ready for it)
then we could crash by attempting to count234(ssh->channels) before
the ssh->channels tree had been set up in the first place.
A simple null-pointer check fixes it. Thanks to Antti Seppanen for the
report.
I removed a vital line of code while fixing the merge conflicts when
cherry-picking 1eb578a488 as
26fe1e26c0, causing Diffie-Hellman key
exchange to be completely broken because the server's host key was
never constructed to verify the signature with. Reinstate it.
Assorted calls to ssh_pkt_getstring in handling the later parts of key
exchange (post-KEXINIT) were not checked for NULL afterwards, so that
a variety of badly formatted key exchange packets would cause a crash
rather than a sensible error message.
None of these is an exploitable vulnerability - the server can only
force a clean null-deref crash, not an access to actually interesting
memory.
Thanks to '3unnym00n' for pointing out one of these, causing me to
find all the rest of them too.
(cherry picked from commit 1eb578a488)
Conflicts:
ssh.c
Cherry-picker's notes: the main conflict arose because the original
commit also made fixes to the ECDH branch of the big key exchange if
statement, which doesn't exist on this branch. Also there was a minor
and purely textual conflict, when an error check was added right next
to a function call that had acquired an extra parameter on master.
The final main loop in do_ssh2_authconn will sometimes loop over all
currently open channels calling ssh2_try_send_and_unthrottle. If the
channel is a sharing one, however, that will reference fields of the
channel structure like 'remwindow', which were never initialised in
the first place (thanks, valgrind). Fix by excluding CHAN_SHARING
channels from that loop.
(cherry picked from commit 7366fde1d4)
When anyone connects to a PuTTY tool's listening socket - whether it's
a user of a local->remote port forwarding, a connection-sharing
downstream or a client of Pageant - we'd like to log as much
information as we can find out about where the connection came from.
To that end, I've implemented a function sk_peer_info() in the socket
abstraction, which returns a freeform text string as best it can (or
NULL, if it can't get anything at all) describing the thing at the
other end of the connection. For TCP connections, this is done using
getpeername() to get an IP address and port in the obvious way; for
Unix-domain sockets, we attempt SO_PEERCRED (conditionalised on some
moderately hairy autoconfery) to get the pid and owner of the peer. I
haven't implemented anything for Windows named pipes, but I will if I
hear of anything useful.
(cherry picked from commit c8f83979a3)
Conflicts:
pageant.c
Cherry-picker's notes: the conflict was because the original commit
also added a use of the same feature in the centralised Pageant code,
which doesn't exist on this branch. Also I had to remove 'const' from
the type of the second parameter to wrap_send_port_open(), since this
branch hasn't had the same extensive const-fixing as master.
PuTTY now uses the updated version of Diffie-Hellman group exchange,
except for a few old OpenSSH versions which Darren Tucker reports only
support the old version.
FIXME: this needs further work because the Bugs config panel has now
overflowed.
(cherry picked from commit 62a1bce7cb)
Assorted calls to ssh_pkt_getstring in handling the later parts of key
exchange (post-KEXINIT) were not checked for NULL afterwards, so that
a variety of badly formatted key exchange packets would cause a crash
rather than a sensible error message.
None of these is an exploitable vulnerability - the server can only
force a clean null-deref crash, not an access to actually interesting
memory.
Thanks to '3unnym00n' for pointing out one of these, causing me to
find all the rest of them too.
The final main loop in do_ssh2_authconn will sometimes loop over all
currently open channels calling ssh2_try_send_and_unthrottle. If the
channel is a sharing one, however, that will reference fields of the
channel structure like 'remwindow', which were never initialised in
the first place (thanks, valgrind). Fix by excluding CHAN_SHARING
channels from that loop.
I'd rather see the cipher and MAC named separately, with a hint that
the two are linked together in some way, than see the cipher called by
a name including the MAC and the MAC init message have an ugly
'<implicit>' in it.
This allows for sharing a bit of code, and it also means that
deduplication of KEXINIT algorithms can be done while working out the
list of algorithms rather than when constructing the KEXINIT packet
itself.
The general plan is that if PuTTY knows a host key for a server, it
should preferentially ask for the same type of key so that there's some
chance of actually getting the same key again. This should mean that
when a server (or PuTTY) adds a new host key type, PuTTY doesn't
gratuitously switch to that key type and then warn the user about an
unrecognised key.
It seems like quite an important thing to mention in the event log!
Suppose there's a bug affecting only one curve, for example? Fixed-
group Diffie-Hellman has always logged the group, but the ECDH log
message just told you the hash and not also the curve.
To implement this, I've added a 'textname' field to all elliptic
curves, whether they're used for kex or signing or both, suitable for
use in this log message and any others we might find a need for in
future.
When anyone connects to a PuTTY tool's listening socket - whether it's
a user of a local->remote port forwarding, a connection-sharing
downstream or a client of Pageant - we'd like to log as much
information as we can find out about where the connection came from.
To that end, I've implemented a function sk_peer_info() in the socket
abstraction, which returns a freeform text string as best it can (or
NULL, if it can't get anything at all) describing the thing at the
other end of the connection. For TCP connections, this is done using
getpeername() to get an IP address and port in the obvious way; for
Unix-domain sockets, we attempt SO_PEERCRED (conditionalised on some
moderately hairy autoconfery) to get the pid and owner of the peer. I
haven't implemented anything for Windows named pipes, but I will if I
hear of anything useful.
The new code remembers the contents and meaning of the outgoing KEXINIT
and uses this to drive the algorithm negotiation, rather than trying to
reconstruct what the outgoing KEXINIT probably said. This removes the
need to maintain the KEXINIT generation and parsing code precisely in
parallel.
It also fixes a bug whereby PuTTY would have selected the wrong host key
type in cases where the server gained a host key type between rekeys.
Having found a lot of unfixed constness issues in recent development,
I thought perhaps it was time to get proactive, so I compiled the
whole codebase with -Wwrite-strings. That turned up a huge load of
const problems, which I've fixed in this commit: the Unix build now
goes cleanly through with -Wwrite-strings, and the Windows build is as
close as I could get it (there are some lingering issues due to
occasional Windows API functions like AcquireCredentialsHandle not
having the right constness).
Notable fallout beyond the purely mechanical changing of types:
- the stuff saved by cmdline_save_param() is now explicitly
dupstr()ed, and freed in cmdline_run_saved.
- I couldn't make both string arguments to cmdline_process_param()
const, because it intentionally writes to one of them in the case
where it's the argument to -pw (in the vain hope of being at least
slightly friendly to 'ps'), so elsewhere I had to temporarily
dupstr() something for the sake of passing it to that function
- I had to invent a silly parallel version of const_cmp() so I could
pass const string literals in to lookup functions.
- stripslashes() in pscp.c and psftp.c has the annoying strchr nature
The ec_name_to_curve and ec_curve_to_name functions shouldn't really
have had to exist at all: whenever any part of the PuTTY codebase
starts using sshecc.c, it's starting from an ssh_signkey or ssh_kex
pointer already found by some other means. So if we make sure not to
lose that pointer, we should never need to do any string-based lookups
to find the curve we want, and conversely, when we need to know the
name of our curve or our algorithm, we should be able to look it up as
a straightforward const char * starting from the algorithm pointer.
This commit cleans things up so that that is indeed what happens. The
ssh_signkey and ssh_kex structures defined in sshecc.c now have
'extra' fields containing pointers to all the necessary stuff;
ec_name_to_curve and ec_curve_to_name have been completely removed;
struct ec_curve has a string field giving the curve's name (but only
for those curves which _have_ a name exposed in the wire protocol,
i.e. the three NIST ones); struct ec_key keeps a pointer to the
ssh_signkey it started from, and uses that to remember the algorithm
name rather than reconstructing it from the curve. And I think I've
got rid of all the ad-hockery scattered around the code that switches
on curve->fieldBits or manually constructs curve names using stuff
like sprintf("nistp%d"); the only remaining switch on fieldBits
(necessary because that's the UI for choosing a curve in PuTTYgen) is
at least centralised into one place in sshecc.c.
One user-visible result is that the format of ed25519 host keys in the
registry has changed: there's now no curve name prefix on them,
because I think it's not really right to make up a name to use. So any
early adopters who've been using snapshot PuTTY in the last week will
be inconvenienced; sorry about that.
This gives families of public key and kex functions (by which I mean
those sharing a set of methods) a place to store parameters that allow
the methods to vary depending on which exact algorithm is in use.
The ssh_kex structure already had a set of parameters specific to
Diffie-Hellman key exchange; I've moved those into sshdh.c and made
them part of the 'extra' structure for that family only, so that
unrelated kex methods don't have to faff about saying NULL,NULL,0,0.
(This required me to write an extra accessor function for ssh.c to ask
whether a DH method was group-exchange style or fixed-group style, but
that doesn't seem too silly.)
Not all of them, but the ones that don't get a 'void *key' parameter.
This means I can share methods between multiple ssh_signkey
structures, and still give those methods an easy way to find out which
public key method they're dealing with, by loading parameters from a
larger structure in which the ssh_signkey is the first element.
(In OO terms, I'm arranging that all static methods of my public key
classes get a pointer to the class vtable, to make up for not having a
pointer to the class instance.)
I haven't actually done anything with the new facility in this commit,
but it will shortly allow me to clean up the constant lookups by curve
name in the ECDSA code.
All the name strings in ssh_cipher, ssh_mac, ssh_hash, ssh_signkey
point to compile-time string literals, hence should obviously be const
char *.
Most of these const-correctness patches are just a mechanical job of
adding a 'const' in the one place you need it right now, and then
chasing the implications through the code adding further consts until
it compiles. But this one has actually shown up a bug: the 'algorithm'
output parameter in ssh2_userkey_loadpub was sometimes returning a
pointer to a string literal, and sometimes a pointer to dynamically
allocated memory, so callers were forced to either sometimes leak
memory or sometimes free a bad thing. Now it's consistently
dynamically allocated, and should be freed everywhere too.
There were ad-hoc functions for fingerprinting a bare key blob in both
cmdgen.c and pageant.c, not quite doing the same thing. Also, every
SSH-2 public key algorithm in the code base included a dedicated
fingerprint() method, which is completely pointless since SSH-2 key
fingerprints are computed in an algorithm-independent way (just hash
the standard-format public key blob), so each of those methods was
just duplicating the work of the public_blob() method with a less
general output mechanism.
Now sshpubk.c centrally provides an ssh2_fingerprint_blob() function
that does all the real work, plus an ssh2_fingerprint() function that
wraps it and deals with calling public_blob() to get something to
fingerprint. And the fingerprint() method has been completely removed
from ssh_signkey and all its implementations, and good riddance.
Obviously PuTTY can't actually do public-key authentication itself, if
you give it a public rather than private key file. But it can still
match the supplied public key file against the list of keys in the
agent, and narrow down to that. So if for some reason you're
forwarding an agent to a machine you don't want to trust with your
_private_ key file (even encrypted), you can still use the '-i' option
to select which key from the agent to use, by uploading just the
public key file to that machine.
It's just ssh_pkt_addstring_data but using strlen to get the length of
string to add, so make that explicit by having it call
ssh_pkt_addstring_data. Good compilers should be unaffected by this
change.
This is the kex protocol id "curve25519-sha256@libssh.org", so called
because it's over the prime field of order 2^255 - 19.
Arithmetic in this curve is done using the Montgomery representation,
rather than the Weierstrass representation. So 'struct ec_curve' has
grown a discriminant field and a union of subtypes.
Several of the functions in ssh2_signkey, and one or two SSH-1 key
functions too, were still taking assorted non-const buffer parameters
that had never been properly constified. Sort them all out.
This causes the initial length field of the SSH-2 binary packet to be
unencrypted (with the knock-on effect that now the packet length not
including MAC must be congruent to 4 rather than 0 mod the cipher
block size), and then the MAC is applied over the unencrypted length
field and encrypted ciphertext (prefixed by the sequence number as
usual). At the cost of exposing some information about the packet
lengths to an attacker (but rarely anything they couldn't have
inferred from the TCP headers anyway), this closes down any
possibility of a MITM using the client as a decryption oracle, unless
they can _first_ fake a correct MAC.
ETM mode is enabled by means of selecting a different MAC identifier,
all the current ones of which are constructed by appending
"-etm@openssh.com" to the name of a MAC that already existed.
We currently prefer the original SSH-2 binary packet protocol (i.e. we
list all the ETM-mode MACs last in our KEXINIT), on the grounds that
it's better tested and more analysed, so at the moment the new mode is
only activated if a server refuses to speak anything else.
PuTTY now uses the updated version of Diffie-Hellman group exchange,
except for a few old OpenSSH versions which Darren Tucker reports only
support the old version.
FIXME: this needs further work because the Bugs config panel has now
overflowed.
Florent Daigniere of Matta points out that RFC 4253 actually
_requires_ us to refuse to accept out-of-range values, though it isn't
completely clear to me why this should be a MUST on the receiving end.
Matta considers this to be a security vulnerability, on the grounds
that if a server should accidentally send an obviously useless value
such as 1 then we will fail to reject it and agree a key that an
eavesdropper could also figure out. Their id for this vulnerability is
MATTA-2015-002.
I'm not actually sure why we've always had back ends notify ldisc of
changes to echo/edit settings by giving ldisc_send(ldisc,NULL,0,0) a
special meaning, instead of by having a separate dedicated notify
function with its own prototype and parameter set. Coverity's recent
observation that the two kinds of call don't even have the same
requirements on the ldisc (particularly, whether ldisc->term can be
NULL) makes me realise that it's really high time I separated the two
conceptually different operations into actually different functions.
While I'm here, I've renamed the confusing ldisc_update() function
which that special operation ends up feeding to, because it's not
actually a function applying to an ldisc - it applies to a front end.
So ldisc_send(ldisc,NULL,0,0) is now ldisc_echoedit_update(ldisc), and
that in turn figures out the current echo/edit settings before passing
them on to frontend_echoedit_update(). I think that should be clearer.
This ought to happen in ssh_do_close alongside the code that shuts
down other local listening things like port forwardings, for the same
obvious reason. In particular, we should get through this _before_ we
put up a modal dialog box telling the user what just went wrong with
the SSH connection, so that further sessions started while that box is
active don't try futilely to connect to the not-really-listening
zombie upstream.
