The number of people has been steadily increasing who read our source
code with an editor that thinks tab stops are 4 spaces apart, as
opposed to the traditional tty-derived 8 that the PuTTY code expects.
So I've been wondering for ages about just fixing it, and switching to
a spaces-only policy throughout the code. And I recently found out
about 'git blame -w', which should make this change not too disruptive
for the purposes of source-control archaeology; so perhaps now is the
time.
While I'm at it, I've also taken the opportunity to remove all the
trailing spaces from source lines (on the basis that git dislikes
them, and is the only thing that seems to have a strong opinion one
way or the other).
Apologies to anyone downstream of this code who has complicated patch
sets to rebase past this change. I don't intend it to be needed again.
Because SSH-1 is a very niche interest these days. Mostly this affects
the public key documentation.
Also, a couple of unrelated concessions to modernity.
- Mention public key authentication
- Define and describe the "terminal window"
- Mention trust sigils
- Describe here the lack of feedback in password prompts, as well as in
the FAQ
Remove the 'winhelp-topic' IDs from the Halibut source, and from the
code. Now we have one fewer name to think of every time we add a
setting.
I've left the HELPCTX system in place, with the vague notion that it
might be a useful layer of indirection for some future help system on a
platform like Mac OS X.
(I've left the putty.hlp target in doc/Makefile, if nothing else because
this is a convenient test case for Halibut's WinHelp support. But the
resulting help file will no longer support context help.)
At the point when we change over the seat's trust status to untrusted
for the last time, to finish authentication, Plink will now present a
final interactive prompt saying 'Press Return to begin session'. This
is a hint that anything after that that resembles an auth prompt
should be treated with suspicion, because _PuTTY_ thinks it's finished
authenticating.
This is of course an annoying inconvenience for interactive users, so
I've tried to reduce its impact as much as I can. It doesn't happen in
GUI PuTTY at all (because the trust sigil system is used instead); it
doesn't happen if you use plink -batch (because then the user already
knows that they _never_ expect an interactive prompt); and it doesn't
happen if Plink's standard input is being redirected from anywhere
other than the terminal / console (because then it would be pointless
for the server to try to scam passphrases out of the user anyway,
since the user isn't in a position to enter one in response to a spoof
prompt). So it should only happen to people who are using Plink in a
terminal for interactive login purposes, and that's not _really_ what
I ever intended Plink to be used for (which is why it's never had any
out-of-band control UI like OpenSSH's ~ system).
If anyone _still_ doesn't like this new prompt, it can also be turned
off using the new -no-antispoof flag, if the user is willing to
knowingly assume the risk.
The executables were already ignoring it.
This is a minimal change; PUTTY.HLP can still be built, and there's
still all the context IDs lying around.
Buildscr changes are untested.
This commit adds sanitisation to PSCP and PSFTP in the same style as
I've just put it into Plink. This time, standard error is sanitised
without reference to whether it's redirected (at least unless you give
an override option), on the basis that where Plink is _sometimes_ an
SSH transport for some other protocol, PSCP and PSFTP _always_ are.
But also, the sanitiser is run over any remote filename sent by the
server, substituting ? for any control characters it finds. That
removes another avenue for the server to deliberately confuse the
display.
This commit fixes our bug 'pscp-unsanitised-server-output', aka the
two notional 'vulnerabilities' CVE-2019-6109 and CVE-2019-6110.
(Although we regard those in isolation as only bugs, not serious
vulnerabilities, because their main threat was in hiding the evidence
of a server having exploited other more serious vulns that we never
had.)
If Plink's standard output and/or standard error points at a Windows
console or a Unix tty device, and if Plink was not configured to
request a remote pty (and hence to send a terminal-type string), then
we apply the new control-character stripping facility.
The idea is to be a mild defence against malicious remote processes
sending confusing escape sequences through the standard error channel
when Plink is being used as a transport for something like git: it's
OK to have actual sensible error messages come back from the server,
but when you run a git command, you didn't really intend to give the
remote server the implicit licence to write _all over_ your local
terminal display. At the same time, in that scenario, the standard
_output_ of Plink is left completely alone, on the grounds that git
will be expecting it to be 8-bit clean. (And Plink can tell that
because it's redirected away from the console.)
For interactive login sessions using Plink, this behaviour is
disabled, on the grounds that once you've sent a terminal-type string
it's assumed that you were _expecting_ the server to use it to know
what escape sequences to send to you.
So it should be transparent for all the use cases I've so far thought
of. But in case it's not, there's a family of new command-line options
like -no-sanitise-stdout and -sanitise-stderr that you can use to
forcibly override the autodetection of whether to do it.
This all applies the same way to both Unix and Windows Plink.
Of course this wouldn't have prevented me from making that mistake
myself - it's not as if I carefully re-read the design principles
appendix before writing each code change! - but it might help explain
to _someone_ at some point...
It claimed they were only found in ssh.c, which is no longer true:
after I broke up ssh.c into smaller pieces, they're now found all over
the place.
Also, one of the things I did during that refactoring was to arrange
that each protocol layer's cleanup function (hopefully) reliably frees
everything the coroutine might have allocated and been in the middle
of using, which was something I knew the old code was quite bad at. So
I've mentioned that in the coroutines section too, while I'm here.
I've recently started using several C99 features in PuTTY, after
finally reaching the point where it didn't break my builds to do so,
even on Windows. So it's now outright inaccurate for the documented
design principles to claim that we're sticking to C90.
While I'm here, I've filled in a bit more detail about the assumptions
we do permit.
It is useful to be able to exclude the header so that the log file
can be used for realtime input to other programs such as Kst for
plotting live data from sensors.
This commit adds the new ids and fingerprints in the keys appendix of
the manual, and moves the old ones down into the historic-keys
section. I've tweaked a few pieces of wording for ongoing use, so that
they don't imply a specific number of past key rollovers.
The -pgpfp option in all the tools now shows the new Master Key
fingerprint and the previous (2015) one. I've adjusted all the uses of
the #defines in putty.h so that future rollovers should only have to
modify the #defines themselves.
Most importantly, sign.sh bakes in the ids of the current release and
snapshot keys, so that snapshots will automatically be signed with the
new snapshot key and the -r option will invoke the new release key.
Thanks to Jiri Kaspar for sending this patch (apart from the new docs
section, which is in my own words), which implements a feature we've
had as a wishlist item ('utf8-plus-vt100') for a long time.
I was actually surprised it was possible to implement it in so few
lines of code! I'd forgotten, or possibly never noticed in the first
place, that even in UTF-8 mode PuTTY not only accepts but still
_processes_ all the ISO 2022 control sequences and shift characters,
and keeps running track of all the same state in term->cset and
term->cset_attrs that it tracks in IS0-2022-enabled modes. It's just
that in UTF-8 mode, at the very last minute when a character+attribute
pair is about to be written into the terminal's character buffer, it
deliberately ignores the contents of those variables.
So all that was needed was a new flag checked at that last moment
which causes it not quite to ignore them after all, and bingo,
utf8-plus-vt100 is supported. And it works no matter which ISO 2022
sequences you're using; whether you're using ESC ( 0 to select the
line drawing set directly into GL and ESC ( B to get back when you're
done, or whether you send a preliminary ESC ( B ESC ) 0 to get GL/GR
to be ASCII and line drawing respectively so you can use SI and SO as
one-byte mode switches thereafter, both work just as well.
This implementation strategy has a couple of consequences, which I
don't think matter very much one way or the other but I document them
just in case they turn out to be important later:
- if an application expecting this mode has already filled your
terminal window with lqqqqqqqqk, then enabling this mode in Change
Settings won't retroactively turn them into the line drawing
characters you wanted, because no memory is preserved in the screen
buffer of what the ISO 2022 state was when they were printed. So
the application still has to do a screen refresh.
- on the other hand, if you already sent the ESC ( 0 or whatever to
put the terminal _into_ line drawing mode, and then you turn on
this mode in Change Settings, you _will_ still be in line drawing
mode, because the system _does_ remember your current ISO 2022
state at all times, whether it's currently applying it to output
printing characters or not.
The former has advantages in terms of keeping Kerberos credentials up
to date, but it also does something sufficiently weird to the usual
SSH host key system that I think it's worth making sure users have a
means of turning it off separately from the less intrusive GSS
userauth.
This was originally sent in as part of the GSSAPI patch, but I've
extracted into a separate commit because that patch was more than
complicated enough by itself.
This is a heavily edited (by me) version of a patch originally due to
Nico Williams and Viktor Dukhovni. Their comments:
* Don't delegate credentials when rekeying unless there's a new TGT
or the old service ticket is nearly expired.
* Check for the above conditions more frequently (every two minutes
by default) and rekey when we would delegate credentials.
* Do not rekey with very short service ticket lifetimes; some GSSAPI
libraries may lose the race to use an almost expired ticket. Adjust
the timing of rekey checks to try to avoid this possibility.
My further comments:
The most interesting thing about this patch to me is that the use of
GSS key exchange causes a switch over to a completely different model
of what host keys are for. This comes from RFC 4462 section 2.1: the
basic idea is that when your session is mostly bidirectionally
authenticated by the GSSAPI exchanges happening in initial kex and
every rekey, host keys become more or less vestigial, and their
remaining purpose is to allow a rekey to happen if the requirements of
the SSH protocol demand it at an awkward moment when the GSS
credentials are not currently available (e.g. timed out and haven't
been renewed yet). As such, there's no need for host keys to be
_permanent_ or to be a reliable identifier of a particular host, and
RFC 4462 allows for the possibility that they might be purely
transient and only for this kind of emergency fallback purpose.
Therefore, once PuTTY has done a GSS key exchange, it disconnects
itself completely from the permanent host key cache functions in
storage.h, and instead switches to a _transient_ host key cache stored
in memory with the lifetime of just that SSH session. That cache is
populated with keys received from the server as a side effect of GSS
kex (via the optional SSH2_MSG_KEXGSS_HOSTKEY message), and used if
later in the session we have to fall back to a non-GSS key exchange.
However, in practice servers we've tested against do not send a host
key in that way, so we also have a fallback method of populating the
transient cache by triggering an immediate non-GSS rekey straight
after userauth (reusing the code path we also use to turn on OpenSSH
delayed encryption without the race condition).
Rewrite the "Using PuTTY" section for 'clipboard-generality', and also
explain why we default to mouse-based selection, interaction with other
applications via PRIMARY when running PuTTY on Unix, and bracketed-paste
mode. Also add lots of index terms.
On all platforms, you can now configure which clipboard the mouse
pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which
Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are:
- nothing at all
- a clipboard which is implicitly written by the act of mouse
selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else)
- the standard clipboard written by explicit copy/paste UI actions
(CLIPBOARD on X, the unique system clipboard elsewhere).
Also, you can control whether selecting text with the mouse _also_
writes to the explicitly accessed clipboard.
The wording of the various messages changes between platforms, but the
basic UI shape is the same everywhere.
This makes space in the Selection panel (at least on Windows; it
wasn't overfull on Unix) to add a new set of config options
controlling the mapping of UI actions to clipboards.
(A possible future advantage of having spare space in this new Words
panel is that there's room to add controls for context-sensitive
special-casing, e.g. I'd quite like ':' to be treated differently when
it appears as part of "http://".)
I know some users don't like any colour _at all_, and we have a
separate option to turn off xterm-style 256-colour sequences, so it
seems remiss not to have an option to disable true colour as well.
