One of my changes in uxnet.c was outside the NO_IPV6 ifdef, and broke
compilation in the normal mode. Revert all changes in that file and
replace with a reference to the 'step' parameter in the no-IPv6
version of the SOCKADDR_FAMILY macro, so that those warnings are
squelched anyway.
[originally from svn r10136]
[r10135 == e00a004e64]
A user pointed out that 'family' was uninitialised in config.c, and
when I tried test-building with -DNO_IPV6 (and the usual -Werror, of
course) some unused variables showed up in uxnet.c too.
[originally from svn r10135]
I've gone through everywhere we handle host names / addresses (on
command lines, in PuTTY config, in port forwarding, in X display
names, in host key storage...) and tried to make them handle IPv6
literals sensibly, by using the host_str* functions I introduced in my
previous commit. Generally it's now OK to use a bracketed IPv6 literal
anywhere a hostname might have been valid; in a few cases where no
ambiguity exists (e.g. no :port suffix is permitted anyway)
unbracketed IPv6 literals are also acceptable.
[originally from svn r10120]
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
It was only actually used in X11 and port forwarding, to find internal
state structures given only the Socket that ssh.c held. So now that
that lookup has been reworked to be the sensible way round,
private_ptr is no longer used for anything and can be removed.
[originally from svn r10075]
This prevents embarrassing mess-ups involving getting back a Socket
which has mostly been memset to 0 but contains an error message,
sk_close()ing it to free the memory, and finding that standard input
has been closed as a side effect.
[originally from svn r10073]
There are two new functions: one to construct a SockAddr wrapping a
Unix socket pathname (which can also be used as the destination for
new_connection), and one to establish a new listening Unix-domain
socket.
[originally from svn r10072]
The mechanism for constructing a new connection-type Socket when a
listening one receives an incoming connection previously worked by
passing a platform-specific 'OSSocket' type to the plug_accepting
function, which would then call sk_register to wrap it with a proper
Socket instance. This is less flexible than ideal, because it presumes
that only one kind of OS object might ever need to be turned into a
Socket. So I've replaced OSSocket throughout the code base with a pair
of parameters consisting of a function pointer and a context such that
passing the latter to the former returns the appropriate Socket; this
will permit different classes of listening Socket to pass different
function pointers.
In deference to the reality that OSSockets tend to be small integers
or pointer-sized OS handles, I've made the context parameter an
int/pointer union that can hold either of those directly, rather than
the usual approach of making it a plain 'void *' and requiring a
context structure to be dynamically allocated every time.
[originally from svn r10068]
Again, I've removed the special-purpose ad-hockery from the assorted
front end message loops that dealt with deferred handling of socket
errors, and instead uxnet.c and winnet.c arrange that for themselves
by calling the new general top-level callback mechanism.
[originally from svn r10023]
parallels a similar mechanism in winnet.c and came over by copy and
paste, but is pointless in the Unix networking API.
On Windows, if you're using a mechanism such as WSAAsyncSelect which
delivers readability notifications as messages rather than return
values from a system call, you only get notified that a socket is
readable once - it remembers that it's told you, and doesn't tell you
again until after you've done a read. So in the case where we
intentionally stop reading from a socket because our local buffer is
full, and later want to start reading again, we do a read from the
socket with MSG_PEEK set, and that clears Windows's flag and tells it
to start sending us readability notifications again.
On Unix, select() and friends didn't do anything so strange in the
first place, so the whole mechanism is unnecessary.
[originally from svn r9951]
localhost connections, and also enable X forwarding in such a way that
it will attempt to connect to a Unix-domain X server socket, an
assertion will fail when proxy_for_destination() tries to call
sk_getaddr(). Fix by ensuring that Unix-domain sockets are _never_
proxied, since they fundamentally can't be.
[originally from svn r9688]
remembered to do before! Also some related fixes, such as that after
we do so we should immediately stop selecting on the socket in
question.
[originally from svn r9363]
data channels. Should comprehensively fix 'half-closed', in principle,
though it's a big and complicated change and so there's a good chance
I've made at least one mistake somewhere.
All connections should now be rigorous about propagating end-of-file
(or end-of-data-stream, or socket shutdown, or whatever) independently
in both directions, except in frontends with no mechanism for sending
explicit EOF (e.g. interactive terminal windows) or backends which are
basically always used for interactive sessions so it's unlikely that
an application would be depending on independent EOF (telnet, rlogin).
EOF should now never accidentally be sent while there's still buffered
data to go out before it. (May help fix 'portfwd-corrupt', and also I
noticed recently that the ssh main session channel can accidentally
have MSG_EOF sent before the output bufchain is clear, leading to
embarrassment when it subsequently does send the output).
[originally from svn r9279]
to a Unix-domain socket. This typically works fine when PuTTY is run on the
same machine as the X server, but it's broken multi-hop X forwarding through
OpenSSH; when OpenSSH creates a proxy X server "localhost:10", it only listens
on TCP, not on a Unix-domain socket.
Instead, when deciding on the details of the display, we actively probe to see
if there's a Unix-domain socket we can use instead, and only use it if it's
there, falling back to the specified IP "localhost" if not.
Independently, when looking for local auth details in Xauthority for a
"localhost" TCP display, we prefer a matching Unix-domain entry, but will fall
back to an IP "localhost" entry (which would be unusual, but we don't trust a
Windows X server not to do it) -- this is a generalisation of the special case
added in r2538 (but removed in r8305, as the automatic upgrade masked the need
for it).
(This is now done in platform-independent code, so a side-effect is that
get_hostname() is now part of the networking abstraction on all platforms.)
[originally from svn r8462]
[r2538 == fda9983243]
[r8305 == ca6fc3a4da]
This could cause Unix PuTTY to segfault when X forwarding over an SSH session
through a proxy.
(sk_getaddr() wouldn't cope either -- in that case, add an assertion to make it
more obvious; I don't think it should ever happen.)
[originally from svn r8391]
sk_hostname_is_local(), to catch the case where we're doing something like X11
forwarding over SSH through a proxy, and we've thus disabled local lookup of
hostnames.
(I think this is what's behind the report in
<e9a86996-5dc2-4428-9b0c-c65693ca6351@m32g2000hsf.googlegroups.com>
in comp.security.ssh, although I'd like to know more of the circumstances.)
[originally from svn r8385]
strings more rigorously, and then we look up the local X authority
data in .Xauthority _ourself_ rather than delegating to an external
xauth program. This is (negligibly) more efficient on Unix, assuming
I haven't got it wrong in some subtle way, but its major benefit is
that we can now support X authority lookups on Windows as well
provided the user points us at an appropriate X authority file in
the standard format. A new Windows-specific config option has been
added for this purpose.
[originally from svn r8305]
"curraddr", and turn "family" into a macro-derived property of the
other fields. The idea is that this renders SockAddrs immutable once
created, which should open up the possibility of duplicating and
reusing one without having to redo the actual DNS lookup.
I _hope_ I haven't broken anything. The new code architecture
contains several rather dubious-looking operations (namely the
arbitrary choice of the first returned address in functions like
sk_getaddr and sk_address_is_local - what if, for instance, a DNS
lookup returned a local and a non-local address?), but I think they
were functionally just as dubious beforehand and all this change has
done is to make them more obviously so to a reader.
[originally from svn r8293]
(rather than IPv4 or IPv6-only; this is the default), try to open up listening
sockets on both address families, rather than (unhelpfully) just IPv6. (And
don't open one if the other can't be bound, in a nod to CVE-2008-1483.)
Based on a patch from Ben A L Jemmett.
[originally from svn r8150]
[this svn revision also touched putty-wishlist]
addressing X displays. Update PuTTY's display-name-to-Unix-socket-
path translation code to cope with it, thus causing X forwarding to
start working again on Leopard.
[originally from svn r8020]
problems using Unix PuTTY port forwarding. Sockets we create by
connect() are immediately set into nonblocking mode by fcntl, but
sockets we create by accept() were not. This trivial fix should help.
[originally from svn r7864]
PuTTY causes the child process to inherit a lot of socket fds from
its parent, which is a pain if one of them then ends up holding open
a listening socket which the parent was using for port forwarding
after the parent itself is dead.
Therefore, this checkin sprinkles FD_CLOEXEC throughout the Unix
platform directory wherever there looks like being a long-lived fd.
[originally from svn r6917]
necessary on Solaris if we want to use SIOCATMARK. Using sockatmark() might
be preferable, but despite being notionally standard it's missing on
Solaris 9 and Mac OS X 10.3.9, whereas everyone seems to have SIOCATMARK
somewhere.
[originally from svn r5676]
the semantics of assert(0) and believes it can return. Add a gratuitous
exit(1) to convince it that this won't happen, and hence quell a couple of
warnings about variables' being used uninitialised.
[originally from svn r5669]
* Make sk_getxdmdata() return an arbitrary string rather than two integers.
This better matches the spec, even if the current version always returns
six bytes
* On Unix, for PF_UNIX sockets, return a counter rather than a constant along
with the PID. This should allow multiple clients to connect within one
second, and is what Xlib does.
* On Unix, interpret AF_INET6 addresses like Xlib does, returning the
embedded IPv4 address for v4-mapped addresses, and six bytes of zeroes
otherwise. The latter is silly, but if I'm going to do anything more sane
I need to check that X servers won't reject it.
[originally from svn r5219]
latter in terms of the former. Also adjust the definition of
ipv4_is_loopback() to avoid using the non-standard inet_netof() and
IN_LOOPBACKNET, and move it next to its remaining uses.
[originally from svn r5215]
connection. Instead, correctly check IPv4 and IPv6 connections, assume that
AF_LOCAL is always local, and anything else is always remote.
This makes trivial local-to-remote forwarding work on my system.
[originally from svn r5180]
