It was there because of a limitation of mkfiles.pl, which had a single
list of include directories that it used on all platforms. CMake does
not. So now there's an easier and more sensible way to have a
different header file included on Windows and Unix: call it the same
name in the two subdirectories, and rely on CMake having put the right
one of those subdirs on the include path.
This is a module that I'd noticed in the past was too monolithic.
There's a big pile of stub functions in uxpgnt.c that only have to be
there because the implementation of true X11 _forwarding_ (i.e.
actually managing a channel within an SSH connection), which Pageant
doesn't need, was in the same module as more general X11-related
utility functions which Pageant does need.
So I've broken up this awkward monolith. Now x11fwd.c contains only
the code that really does all go together for dealing with SSH X
forwarding: the management of an X forwarding channel (including the
vtables to make it behave as Channel at the SSH end and a Plug at the
end that connects to the local X server), and the management of
authorisation for those channels, including maintaining a tree234 of
possible auth values and verifying the one we received.
Most of the functions removed from this file have moved into the utils
subdir, and also into the utils library (i.e. further down the link
order), because they were basically just string and data processing.
One exception is x11_setup_display, which parses a display string and
returns a struct telling you everything about how to connect to it.
That talks to the networking code (it does name lookups and makes a
SockAddr), so it has to live in the network library rather than utils,
and therefore it's not in the utils subdirectory either.
The other exception is x11_get_screen_number, which it turned out
nothing called at all! Apparently the job it used to do is now done as
part of x11_setup_display. So I've just removed it completely.
This replaces the pure radio-button setup that we've always had on the
Session config panel.
Since the last release, that set of radio buttons has been getting out
of hand. We've added two new protocols (SUPDUP, and the 'bare
ssh-connection' aka psusan protocol), neither of which is mainstream
enough to be a sensible thing to wave at all users on the front page
of the config GUI, so that they perhaps start wondering if that's the
protocol they want to use, or get sidetracked by going and looking it
up.
The replacement UI still has radio buttons, but only for the most
common protocols, which will typically be SSH and serial. Everything
else is relegated to a drop-down list sitting next to a third radio
button labelled "Other".
In every be_* module providing a backends[] list, there's also a
variable n_ui_backends which indicates how many of the backends ought
to appear as first-level radio buttons.
(Credit where due: this patch is a joint effort between Jacob and me,
and is one of those rare cases where it would be nice to be able to
put both our names into the Author field of the commit. Failing that,
I can at least mention it here.)
Now we pass the whole set of fingerprints, and also a displayable
format for the full host public key.
NFC: this commit doesn't modify any of the host key prompts to _use_
any of the new information. That's coming next.
Each of these #defines represents a block of 256 code values that are
used, internally to the terminal code, to indicate that a character is
in one of the currently selected single-byte character sets. One
effect of this is that reconfiguring the character set in mid-session
causes all the text already on screen to be redrawn.
Unfortunately, those 512 code points were allocated at 0xF000-0xF1FF,
which is inside the Unicode private-use area. So if a font uses that
area to define actually useful glyphs, then those glyphs won't be
displayed correctly by PuTTY; instead, outputting 0xF000+'A' (for
example) will display as 'A'. A user recently reported this problem
with the 'Hack' font from https://github.com/ryanoasis/nerd-fonts .
RDB's comment next to the #defines suggested that this was done on
purpose for consistency with Linux (though it's not clear what part of
Linux; perhaps the virtual console driver used to work this way?). But
now it's getting in the way of actually useful Unicode characters,
that consistency doesn't seem like the most important thing. (Also, it
just seems wrong to me that you even _can_ cause PuTTY's terminal
emulator to use these special internal character representations by
sending legal UTF-8.)
So I've moved this block of 512 characters to 0xDC00, which is in the
Unicode surrogate space, and hence can't be stored in the terminal by
sending UTF-8 at all (since our UTF-8 decoder rejects that range, as
per spec). That's where we were already keeping other magic blocks
like CSET_LINEDRW and CSET_SCOACS, and there's still room for two
more.
The net effect should be that in Windows PuTTY, U+F000 to U+F1FF are
now displayed as whatever your font wants to show.
Similarly to other recent changes, the frontend now proactively keeps
Terminal up to date with the current position and size of the terminal
window, so that escape-sequence queries can be answered immediately
from the Terminal's own internal data structures without needing a
call back to the frontend.
Mostly this has let me remove explicit window-system API calls that
retrieve the window position and size, in favour of having the front
ends listen for WM_MOVE / WM_SIZE / ConfigureNotify events and track
the position and size that way. One exception is that the window pixel
size is still requested by Seat via a callback, to put in the
wire-encoded termios settings. That won't be happening very much, so
I'm leaving it this way round for the moment.
Now terminal.c makes nearly all the decisions about what the colour
palette should actually contain: it does the job of reading the
GUI-configurable colours out of Conf, and also the job of making up
the rest of the xterm-256 palette. The only exception is that TermWin
can provide a method to override some of the default colours, which on
Windows is used to implement the 'Use system colours' config option.
This saves code overall, partly because the front ends don't have to
be able to send palette data back to the Terminal any more (the
Terminal keeps the master copy and can answer palette-query escape
sequences from its own knowledge), and also because now there's only
one copy of the xterm-256 palette setup code (previously gtkwin.c and
window.c each had their own version of it).
In this rewrite, I've also introduced a multi-layered storage system
for the palette data in Terminal. One layer contains the palette
information derived from Conf; the next contains platform overrides
(currently just Windows's 'Use system colours'); the last one contains
overrides set by escape sequences in the middle of the session. The
topmost two layers can each _conditionally_ override the ones below.
As a result, if a server-side application manually resets (say) the
default fg and bg colours in mid-session to something that works well
in a particular application, those changes won't be wiped out by a
change in the Windows system colours or the Conf, which they would
have been before. Instead, changes in Conf or the system colours alter
the lower layers of the structure, but then when palette_rebuild is
called, the upper layer continues to override them, until a palette
reset (ESC]R) or terminal reset (e.g. ESC c) removes those upper-layer
changes. This seems like a more consistent strategy, in that the same
set of configuration settings will produce the same end result
regardless of what order they were applied in.
The palette-related methods in TermWin have had a total rework.
palette_get and palette_reset are both gone; palette_set can now set a
contiguous range of colours in one go; and the new
palette_get_overrides replaces window.c's old systopalette().
There are three separate indexing schemes in use by various bits of
the PuTTY front ends, and _none_ of them was clearly documented, let
alone all in the same place. Worse, functions that looked obviously
related, like win_palette_set and win_palette_get, used different
encodings.
Now all the encodings are defined together in putty.h, with
explanation of why there are three in the first place and clear
documentation of where each one is used; terminal.c provides mapping
tables that convert between them; the terminology is consistent
throughout; and win_palette_set has been converted to use the sensible
encoding.
Again, I've replaced it with a push-based notification going in the
other direction, so that when the terminal output stream includes a
query for 'is the window minimised?', the Terminal doesn't have to
consult the TermWin, because it already knows the answer.
The GTK API I'm using here (getting a GdkEventWindowState via
GtkWidget's window-state-event) is not present in GTK 1. The API I was
previously using (gdk_window_is_viewable) _is_, but it turns out that
that API doesn't reliably give the right answer: it only checks
visibility of GDK window ancestors, not X window ancestors. So in fact
GTK 1 PuTTY/pterm was only ever _pretending_ to reliably support the
'am I minimised' terminal query. Now it won't pretend any more.
Previously, window title management happened in a bipartisan sort of
way: front ends would choose their initial window title once they knew
what host name they were connecting to, but then Terminal would
override that later if the server set the window title by escape
sequences.
Now it's all done the same way round: the Terminal object is always
where titles are invented, and they only propagate in one direction,
from the Terminal to the TermWin.
This allows us to avoid duplicating in multiple front ends the logic
for what the initial window title should be. The frontend just has to
make one initial call to term_setup_window_titles, to tell the
terminal what hostname should go in the default title (if the Conf
doesn't override even that). Thereafter, all it has to do is respond
to the TermWin title-setting methods.
Similarly, the logic that handles window-title changes as a result of
the Change Settings dialog is also centralised into terminal.c. This
involved introducing an extra term_pre_reconfig() call that each
frontend can call to modify the Conf that will be used for the GUI
configurer; that's where the code now lives that copies the current
window title into there. (This also means that GTK PuTTY now behaves
consistently with Windows PuTTY on that point; GTK's previous
behaviour was less well thought out.)
It also means there's no longer any need for Terminal to talk to the
front end when a remote query wants to _find out_ the window title:
the Terminal knows the answer already. So TermWin's get_title method
can go.
All implementations of it work by checking the line_codepage field in
the ucsdata structure that the terminal itself already has a pointer
to. Therefore, it's a totally unnecessary query function: the terminal
can check the same thing directly by inspecting that structure!
(In fact, it already _does_ do that, for the purpose of actually
deciding how to decode terminal output data. It only uses this query
function at all for the auxiliary purpose of inventing useful tty
modes to pass to the backend.)
The idea of the especially large RNG that we use in key generation is
that it should have as much actual entropy as possible. The reason I
based it on SHA-512 previously was that that was the hash function in
our collection with the largest output. But that's no longer true!
Among the SHA-3 family that I added for Ed448 purposes, we have a
ready-made variant of SHAKE-256 that outputs a whopping 114 bytes of
hash. I see no reason not to upgrade to that from SHA-512's 64 bytes.
(I could probably extend it even further by manually making another
SHA-3 variant specially for the purpose, but I don't know that it
would be worth it. This is a one-line change which I think is already
a positive step.)
Rather like some of the tricks I did in mpint.h, this replaces the
unparametrised function random_setup_special() with one called
random_setup_custom() taking a hash-algorithm parameter.
The old syntax random_setup_special() still exists, and is a macro
wrapper on random_setup_custom() that passes ssh_sha512 as an
argument. This means I can keep the choice of hash function consistent
between the key generation front ends.
This adds potential flexibility: now, anyone wanting a different kind
of special RNG can make it out of whatever primitive they like. But a
more immediate point is to remove an inter-module dependency:
sshrand.c now doesn't need to be linked against the SHA-512 code.
This is mostly easy: it's just like drawing an underline, except that
you put it at a different height in the character cell. The only
question is _where_ in the character cell.
Pango, and Windows GetOutlineTextMetrics, will tell you exactly where
the font wants to have it. Following xterm, I fall back to 3/8 of the
font's ascent (above the baseline) if either of those is unavailable.
Two minor memory-leak fixes on 0.74 seem not to be needed on master:
the fix in an early exit path of pageant_add_keyfile is done already
on master in a different way, and the missing sfree(fdlist) in
uxsftp.c is in code that's been completely rewritten in the uxcliloop
refactoring.
Other minor conflicts: the rework in commit b52641644905 of
ssh1login.c collided with the change from FLAG_VERBOSE to
seat_verbose(), and master and 0.74 each added an unrelated extra
field to the end of struct SshServerConfig.
This mitigates CVE-2020-14002: if you're in the habit of clicking OK
to unknown host keys (the TOFU policy - trust on first use), then an
active attacker looking to exploit that policy to substitute their own
host key in your first connection to a server can use the host key
algorithm order in your KEXINIT to (not wholly reliably) detect
whether you have a key already stored for this host, and if so, abort
their attack to avoid giving themself away.
However, for users who _don't_ use the TOFU policy and instead check
new host keys out of band, the dynamic policy is more useful. So it's
provided as a configurable option.
Now, instead of a 'const char *' in the static data segment, error
messages returned from backend setup are dynamically allocated and
freed by the caller.
This will allow me to make the messages much more specific (including
errno values and the like). However, this commit is pure refactoring:
I've _just_ changed the allocation policy, and left all the messages
alone.
In commit 1f399bec58 I had the idea of generating the protocol radio
buttons in the GUI configurer by looping over the backends[] array,
which gets the reliably correct list of available backends for a given
binary rather than having to second-guess. That's given me an idea: we
can do the same for the per-backend config panels too.
Now the GUI config panel for every backend is guarded by a check of
backend_vt_from_proto, and we won't display the config for that
backend unless it's present.
In particular, this allows me to move the serial-port configuration
back into config.c from the separate file sercfg.c: we find out
whether to apply it by querying backend_vt_from_proto(PROT_SERIAL),
the same as any other backend.
In _particular_ particular, that also makes it much easier for me to
move the serial config up the pecking order, so that it's now second
only to SSH in the list of per-protocol config panes, which I think is
now where it deserves to be.
(A side effect of that is that I now have to come up with a different
method of having each serial backend specify the subset of parity and
flow control schemes it supports. I've done it by adding an extra pair
of serial-port specific bitmask fields to BackendVtable, taking
advantage of the new vtable definition idiom to avoid having to
boringly declare them as zero in all the other backends.)
The motivation is for the SUPDUP protocol. The server may send a
signal for the terminal to reset any input buffers. After this, the
server will not know the state of the terminal, so it is required to
send its cursor position back.
This is standardised by RFC 8709 at SHOULD level, and for us it's not
too difficult (because we use general-purpose elliptic-curve code). So
let's be up to date for a change, and add it.
This implementation uses all the formats defined in the RFC. But we
also have to choose a wire format for the public+private key blob sent
to an agent, and since the OpenSSH agent protocol is the de facto
standard but not (yet?) handled by the IETF, OpenSSH themselves get to
say what the format for a key should or shouldn't be. So if they don't
support a particular key method, what do you do?
I checked with them, and they agreed that there's an obviously right
format for Ed448 keys, which is to do them exactly like Ed25519 except
that you have a 57-byte string everywhere Ed25519 had a 32-byte
string. So I've done that.
This is the same protocol that PuTTY's connection sharing has been
using for years, to communicate between the downstream and upstream
PuTTYs. I'm now promoting it to be a first-class member of the
protocols list: if you have a server for it, you can select it in the
GUI or on the command line, and write out a saved session that
specifies it.
This would be completely insecure if you used it as an ordinary
network protocol, of course. Not only is it non-cryptographic and wide
open to eavesdropping and hijacking, but it's not even _authenticated_
- it begins after the userauth phase of SSH. So there isn't even the
mild security theatre of entering an easy-to-eavesdrop password, as
there is with, say, Telnet.
However, that's not what I want to use it for. My aim is to use it for
various specialist and niche purposes, all of which involve speaking
it over an 8-bit-clean data channel that is already set up, secured
and authenticated by other methods. There are lots of examples of such
channels:
- a userv(1) invocation
- the console of a UML kernel
- the stdio channels into other kinds of container, such as Docker
- the 'adb shell' channel (although it seems quite hard to run a
custom binary at the far end of that)
- a pair of pipes between PuTTY and a Cygwin helper process
- and so on.
So this protocol is intended as a convenient way to get a client at
one end of any those to run a shell session at the other end. Unlike
other approaches, it will give you all the SSH-flavoured amenities
you're already used to, like forwarding your SSH agent into the
container, or forwarding selected network ports in or out of it, or
letting it open a window on your X server, or doing SCP/SFTP style
file transfer.
Of course another way to get all those amenities would be to run an
ordinary SSH server over the same channel - but this approach avoids
having to manage a phony password or authentication key, or taking up
your CPU time with pointless crypto.
The previous 'name' field was awkwardly serving both purposes: it was
a machine-readable identifier for the backend used in the saved
session format, and it was also used in error messages when Plink
wanted to complain that it didn't support a particular backend. Now
there are two separate name fields for those purposes.
In commit b4c8fd9d8 which introduced the Seat trait, I got a bit
confused about the prototype of new_prompts(). Previously it took a
'Frontend *' parameter; I edited the call sites to pass a 'Seat *'
instead, but the actual function definition takes no parameters at all
- and rightly so, because the 'Frontend *' inside the prompts_t has
been removed and _not_ replaced with a 'Seat *', so the constructor
would have nothing to do with such a thing anyway.
But I wrote the function declaration in putty.h with '()' rather than
'(void)' (too much time spent in C++), and so the compiler never
spotted the mismatch.
Now new_prompts() is consistently nullary everywhere it appears: the
prototype in the header is a proper (void) one, and the call sites
have been modified to not pointlessly give it a Seat or null pointer.
(cherry picked from commit d183484742)
I've added the gcc-style attribute("printf") to a lot of printf-shaped
functions in this code base that didn't have it. To make that easier,
I moved the wrapping macro into defs.h, and also enabled it if we
detect the __clang__ macro as well as __GNU__ (hence, it will be used
when building for Windows using clang-cl).
The result is that a great many format strings in the code are now
checked by the compiler, where they were previously not. This causes
build failures, which I'll fix in the next commit.
(cherry picked from commit cbfba7a0e9)
UBsan pointed out another memcpy from NULL (again with length 0) in
the prompts_t system. When I looked at it, I realised that firstly
prompt_ensure_result_size was an early not-so-good implementation of
sgrowarray_nm that would benefit from being replaced with a call to
the real one, and secondly, the whole system for storing prompt
results should really have been replaced with strbufs with the no-move
option, because that's doing all the same jobs better.
So, now each prompt_t holds a strbuf in place of its previous manually
managed string. prompt_ensure_result_size is gone (the console
prompt-reading functions use strbuf_append, and everything else just
adds to the strbuf in the usual marshal.c way). New functions exist to
retrieve a prompt_t's result, either by reference or copied.
(cherry picked from commit cd6bc14f04)
These global variables are only ever used by load_settings, which uses
them to vary the default protocol and port number in the absence of
any specification elsewhere. So there's no real need for them to be
universally accessible via the awkward GLOBAL mechanism: they can be
statics inside settings.c, with accessor functions that can set them.
That was the last GLOBAL in putty.h, so I've removed the definition of
the macro GLOBAL itself as well. There are still some GLOBALs in the
Windows subdirectory, though.
I haven't managed to make this one _not_ be a mutable variable, but at
least it's not global across all tools any more: it lives in cmdline.c
along with the code that decides what to set it to, and cmdline.c
exports a query method to ask for its value.
This mutable global was never actually used at all, _even_ in history!
Commit 1a03fa929 introduced it, as part of the jump list support, but
even that commit never _read_ from the variable - it only assigned to
it. I have to guess that it was part of an earlier draft of the jump
lists patch and ended up orphaned in the final version.
Another ugly mutable global variable gone: now, instead of this
variable being defined in cmdline.c and written to by everyone's
main(), it's defined _alongside_ everyone's main() as a constant, and
cmdline.c just refers to it.
A bonus is that now nocmdline.c doesn't have to define it anyway for
tools that don't use cmdline.c. But mostly, it didn't need to be
mutable, so better for it not to be.
While I'm at it, I've also fiddled with the bit flags that go in it,
to define their values automatically using a list macro instead of
manually specifying each one to be a different power of 2.
The global 'int flags' has always been an ugly feature of this code
base, and I suddenly thought that perhaps it's time to start throwing
it out, one flag at a time, until it's totally unused.
My first target is FLAG_VERBOSE. This was usually set by cmdline.c
when it saw a -v option on the program's command line, except that GUI
PuTTY itself sets it unconditionally on startup. And then various bits
of the code would check it in order to decide whether to print a given
message.
In the current system of front-end abstraction traits, there's no
_one_ place that I can move it to. But there are two: every place that
checked FLAG_VERBOSE has access to either a Seat or a LogPolicy. So
now each of those traits has a query method for 'do I want verbose
messages?'.
A good effect of this is that subsidiary Seats, like the ones used in
Uppity for the main SSH server module itself and the server end of
shell channels, now get to have their own verbosity setting instead of
inheriting the one global one. In fact I don't expect any code using
those Seats to be generating any messages at all, but if that changes
later, we'll have a way to control it. (Who knows, perhaps logging in
Uppity might become a thing.)
As part of this cleanup, I've added a new flag to cmdline_tooltype,
called TOOLTYPE_NO_VERBOSE_OPTION. The unconditionally-verbose tools
now set that, and it has the effect of making cmdline.c disallow -v
completely. So where 'putty -v' would previously have been silently
ignored ("I was already verbose"), it's now an error, reminding you
that that option doesn't actually do anything.
Finally, the 'default_logpolicy' provided by uxcons.c and wincons.c
(with identical definitions) has had to move into a new file of its
own, because now it has to ask cmdline.c for the verbosity setting as
well as asking console.c for the rest of its methods. So there's a new
file clicons.c which can only be included by programs that link
against both cmdline.c _and_ one of the *cons.c, and I've renamed the
logpolicy to reflect that.
These were just too footling for even me to bother splitting up into
multiple commits:
- a couple of int -> size_t changes left out of the big-bang commit
0cda34c6f
- a few 'const' added to pointer-type casts that are only going to be
read from (leaving out the const provokes a warning if the pointer
was const _before_ the cast)
- a couple of 'return' statements trying to pass the void return of
one function through to another.
- another missing (void) in a declaration in putty.h (but this one
didn't cause any knock-on confusion).
- a few tweaks to macros, to arrange that they eat a semicolon after
the macro call (extra do ... while (0) wrappers, mostly, and one
case where I had to do it another way because the macro included a
variable declaration intended to remain in scope)
- reworked key_type_to_str to stop putting an unreachable 'break'
statement after every 'return'
- removed yet another type-check of a function loaded from a Windows
system DLL
- and finally, a totally spurious semicolon right after an open brace
in mainchan.c.
In commit b4c8fd9d8 which introduced the Seat trait, I got a bit
confused about the prototype of new_prompts(). Previously it took a
'Frontend *' parameter; I edited the call sites to pass a 'Seat *'
instead, but the actual function definition takes no parameters at all
- and rightly so, because the 'Frontend *' inside the prompts_t has
been removed and _not_ replaced with a 'Seat *', so the constructor
would have nothing to do with such a thing anyway.
But I wrote the function declaration in putty.h with '()' rather than
'(void)' (too much time spent in C++), and so the compiler never
spotted the mismatch.
Now new_prompts() is consistently nullary everywhere it appears: the
prototype in the header is a proper (void) one, and the call sites
have been modified to not pointlessly give it a Seat or null pointer.
In commit 09954a87c I introduced the portfwdmgr_connect_socket()
system, which opened a port forwarding given a callback to create the
Socket itself, with the aim of using it to make forwardings to Unix-
domain sockets and Windows named pipes (both initially for agent
forwarding).
But I forgot that a year and a bit ago, in commit 834396170, I already
introduced a similar low-level system for creating a PortForwarding
around an unusual kind of socket: the portfwd_raw_new() system, which
in place of a callback uses a two-phase setup protocol (you create the
socket in between the two setup calls, and can roll it back if the
socket can't be created).
There's really no need to have _both_ these systems! So now I'm
merging them, which is to say, I'm enhancing portfwd_raw_new to have
the one new feature it needs, and throwing away the newer system
completely. The new feature is to be able to control the initial state
of the 'ready' flag: portfwd_raw_new was always used for initiating
port forwardings in response to an incoming local connection, which
means you need to start off with ready=false and set it true when the
other end of the SSH connection sends back OPEN_CONFIRMATION. Now it's
being used for initiating port forwardings in response to a
CHANNEL_OPEN, we need to be able to start with ready=true.
This commit reverts 09954a87c2 and its
followup fix 12aa06ccc9, and simplifies
the agent_connect system down to a single trivial function that makes
a Socket given a Plug.
I've added the gcc-style attribute("printf") to a lot of printf-shaped
functions in this code base that didn't have it. To make that easier,
I moved the wrapping macro into defs.h, and also enabled it if we
detect the __clang__ macro as well as __GNU__ (hence, it will be used
when building for Windows using clang-cl).
The result is that a great many format strings in the code are now
checked by the compiler, where they were previously not. This causes
build failures, which I'll fix in the next commit.
UBsan pointed out another memcpy from NULL (again with length 0) in
the prompts_t system. When I looked at it, I realised that firstly
prompt_ensure_result_size was an early not-so-good implementation of
sgrowarray_nm that would benefit from being replaced with a call to
the real one, and secondly, the whole system for storing prompt
results should really have been replaced with strbufs with the no-move
option, because that's doing all the same jobs better.
So, now each prompt_t holds a strbuf in place of its previous manually
managed string. prompt_ensure_result_size is gone (the console
prompt-reading functions use strbuf_append, and everything else just
adds to the strbuf in the usual marshal.c way). New functions exist to
retrieve a prompt_t's result, either by reference or copied.
Historically, because of the way Windows Pageant's IPC works, PuTTY's
agent forwarding has always been message-oriented. The channel
implementation in agentf.c deals with receiving a data stream from the
remote agent client and breaking it up into messages, and then it
passes each message individually to agent_query().
On Unix, this is more work than is really needed, and I've always
meant to get round to doing the more obvious thing: making an agent
forwarding channel into simply a stream-oriented proxy, passing raw
data back and forth between the SSH channel and the local AF_UNIX
socket without having to know or care about the message boundaries in
the stream.
The portfwdmgr_connect_socket() facility introduced by the previous
commit is the missing piece of infrastructure to make that possible.
Now, the agent client module provides an API that includes a callback
you can pass to portfwdmgr_connect_socket() to open a streamed agent
connection, and the agent forwarding setup function tries to use that
where possible, only falling back to the message-based agentf.c system
if it can't be done. On Windows, the new piece of agent-client API
returns failure, so we still fall back to agentf.c there.
There are two benefits to doing it this way. One is that it's just
simpler and more robust: if PuTTY isn't trying to parse the agent
connection, then it has less work to do and fewer places to introduce
bugs. The other is that it's futureproof against changes in the agent
protocol: if any kind of extension is ever introduced that requires
keeping state within a single agent connection, or that changes the
protocol itself so that agentf's message-boundary detection stops
working, then this forwarding system will still work.
The number of people has been steadily increasing who read our source
code with an editor that thinks tab stops are 4 spaces apart, as
opposed to the traditional tty-derived 8 that the PuTTY code expects.
So I've been wondering for ages about just fixing it, and switching to
a spaces-only policy throughout the code. And I recently found out
about 'git blame -w', which should make this change not too disruptive
for the purposes of source-control archaeology; so perhaps now is the
time.
While I'm at it, I've also taken the opportunity to remove all the
trailing spaces from source lines (on the basis that git dislikes
them, and is the only thing that seems to have a strong opinion one
way or the other).
Apologies to anyone downstream of this code who has complicated patch
sets to rebase past this change. I don't intend it to be needed again.
Having decided that the terminal's local echo setting shouldn't be
allowed to propagate through to termios, I think the local edit
setting shouldn't either. Also, no other terminal emulator I know
seems to implement this sequence, and if you enable it, things get
very confused in general. I think it's generally better off absent; if
somebody turns out to have been using it, then we'll at least be able
to find out what it's good for.
The functions that previously lived in it now live in terminal.c
itself; they've been renamed term_keyinput and term_keyinputw, and
their function is to add data to the terminal's user input buffer from
a char or wchar_t string respectively.
They sit more comfortably in terminal.c anyway, because their whole
point is to translate into the character encoding that the terminal is
currently configured to use. Also, making them part of the terminal
code means they can also take care of calling term_seen_key_event(),
which simplifies most of the call sites in the GTK and Windows front
ends.
Generation of text _inside_ terminal.c, from responses to query escape
sequences, is therefore not done by calling those external entry
points: we send those responses directly to the ldisc, so that they
don't count as keypresses for all the user-facing purposes like bell
overload handling and scrollback reset. To make _that_ convenient,
I've arranged that most of the code that previously lived in
lpage_send and luni_send is now in separate translation functions, so
those can still be called from situations where you're not going to do
the default thing with the translated data.
(However, pasted data _does_ still count as close enough to a keypress
to call term_seen_key_event - but it clears the 'interactive' flag
when the data is passed on to the line discipline, which tweaks a
minor detail of control-char handling in line ending mode but mostly
just means pastes aren't interrupted.)
Those two flags had the opposite sense to what you might expect: each
one is the value of the Conf entry corresponding to the checkbox that
_disables_ the corresponding terminal feature. So term->bidi is true
if and only if bidi is _off_.
I think that confusion of naming probably contributed to the control-
flow error fixed in the previous commit, just by increasing cognitive
load until I couldn't remember which flags were set where any more! So
now I've renamed the two fields of Terminal, and the corresponding
Conf keywords, to be called "no_bidi" and "no_arabicshaping", in line
with other 'disable this feature' flags, so that it's clear what the
sense should be.
This prevents an assertion failure when random_ref() tries to create
a new PRNG instance and finds there already is one. It also exposes
bugs in which some code path forgot to initialise the PRNG when it
was going to need it, such as the one fixed in the previous commit.
At the point when we change over the seat's trust status to untrusted
for the last time, to finish authentication, Plink will now present a
final interactive prompt saying 'Press Return to begin session'. This
is a hint that anything after that that resembles an auth prompt
should be treated with suspicion, because _PuTTY_ thinks it's finished
authenticating.
This is of course an annoying inconvenience for interactive users, so
I've tried to reduce its impact as much as I can. It doesn't happen in
GUI PuTTY at all (because the trust sigil system is used instead); it
doesn't happen if you use plink -batch (because then the user already
knows that they _never_ expect an interactive prompt); and it doesn't
happen if Plink's standard input is being redirected from anywhere
other than the terminal / console (because then it would be pointless
for the server to try to scam passphrases out of the user anyway,
since the user isn't in a position to enter one in response to a spoof
prompt). So it should only happen to people who are using Plink in a
terminal for interactive login purposes, and that's not _really_ what
I ever intended Plink to be used for (which is why it's never had any
out-of-band control UI like OpenSSH's ~ system).
If anyone _still_ doesn't like this new prompt, it can also be turned
off using the new -no-antispoof flag, if the user is willing to
knowingly assume the risk.
In terminal-based GUI applications, this is passed through to
term_set_trust_status, to toggle whether lines are prefixed with the
new trust sigil. In console applications, the function returns false,
indicating to the backend that it should employ some other technique
for spoofing protection.
This indicates that a line contains trusted information (originated by
PuTTY) or untrusted (from the server). Trusted lines are prefixed by a
three-column signature consisting of the trust sigil (i.e. PuTTY icon)
and a separating space.
To protect against a server using escape sequences to move the cursor
back up to a trusted line and overwrite its contents, any attempt to
write to a termline is preceded by a call to check_trust_status(),
which clears the line completely if the terminal's current trust
status is different from the previous state of that line.
In the terminal data structures, the trust sigil is represented by
0xDFFE (an otherwise unused value, because it's in the surrogate
space). For bidi purposes I've arranged to treat that value as
direction-neutral, so that it will appear on the right if a terminal
line needs it to. (Not that that's currently likely to happen, with
PuTTY not being properly localised, but it's a bit of futureproofing.)
The bidi system is also where I actually insert the trust sigil: the
_logical_ terminal data structures don't include it. term_bidi_line
was a convenient place to add it, because that function was already
transforming a logical terminal line into a physical one in a way that
also generates a logical<->physical mapping table for handling mouse
clicks and cursor positioning; so that function now adds the trust
sigil as well as running the bidi algorithm.
(A knock-on effect of _that_ is that the log<->phys position map now
has to have a value for 'no correspondence', because if the user does
click on the trust sigil, there's no logical terminal position
corresponding to that. So the map can now contain the special value
BIDI_CHAR_INDEX_NONE, and anyone looking things up in it has to be
prepared to receive that as an answer.)
Of course, this terminal-data transformation can't be kept _wholly_
within term_bidi_line, because unlike proper bidi, it actually reduces
the number of visible columns on the line. So the wrapping code
(during glyph display and also copy and paste) has to take account of
the trusted status and use it to ignore the last 3 columns of the
line. This is probably not done absolutely perfectly, but then, it
doesn't need to be - trusted lines will be filled with well-controlled
data generated from the SSH code, which won't be doing every trick in
the book with escape sequences. Only untrusted terminal lines will be
using all the terminal's capabilities, and they don't have this sigil
getting in the way.
This is not yet used by anything, but the idea is that it'll be a
graphic in the terminal window that can't be replicated by a server
sending escape sequences, and hence can be used as a reliable
indication that the text on a particular terminal line is generated by
PuTTY itself and not passed through from the server. This will make it
possible to detect a malicious server trying to mimic local prompts to
trick you out of information that shouldn't be sent over the wire
(such as private-key passphrases).
The trust sigil I've picked is a small copy of the PuTTY icon, which
is thematically nice (it can be read as if the PuTTY icon is the name
of the speaker in a dialogue) and also convenient because we had that
graphic available already on all platforms. (Though the contortions I
had to go through to make the GTK 1 code draw it were quite annoying.)
The trust sigil has the same dimensions as a CJK double-width
character, i.e. it's 2 character cells wide by 1 high.
This goes with the existing 'to_server' flag (indicating whether the
values typed by the user are going to be sent over the wire or remain
local), to indicate whether the _text of the prompts_ has come over
the wire or is originated locally.
Like to_server, nothing yet uses this. It's a hedge against the
possibility of maybe having an option for all the auth prompts to work
via GUI dialog boxes.
I've always thought poll was more hassle to set up, because if you
want to reuse part of your pollfds list between calls then you have to
index every fd by its position in the list as well as the fd number
itself, which gives you twice as many indices to keep track of than if
the fd is always its own key.
But the problem is that select is fundamentally limited to the range
of fds that can fit in an fd_set, which is not the range of fds that
can _exist_, so I've had a change of heart and now have to go with
poll.
For the moment, I've surrounded it with a 'pollwrapper' structure that
lets me treat it more or less like select, containing a tree234 that
maps each fd to its location in the list, and also translating between
the simple select r/w/x classification and the richer poll flags.
That's let me do the migration with minimal disruption to the call
sites.
In future perhaps I can start using poll more directly, and/or using
the richer flag system (though the latter might be fiddly because of
sometimes being constrained to use the glib event loop). But this will
do for now.
A user reports that under OpenWatcom these are defined in <winnls.h>,
in which case it's redundant to redefine them ourselves and provokes a
compiler diagnostic.
Now instead of taking raw arguments to configure the output
StripCtrlChars with, it takes an enumerated value giving the context
of what's being sanitised, and allows the seat to decide what the
output parameters for that context should be.
The only context currently used is SIC_BANNER (SSH login banners).
I've also added a not-yet-used one for keyboard-interactive prompts.
If centralised code like the SSH implementation wants to sanitise
escape sequences out of a piece of server-provided text, it will need
to do it by making a locale-based StripCtrlChars if it's running in a
console context, or a Terminal-based one if it's in a GUI terminal-
window application.
All the other changes of behaviour needed between those two contexts
are handled by providing reconfigurable methods in the Seat vtable;
this one is no different. So now there's a new method in the Seat
vtable that will construct a StripCtrlChars appropriate to that kind
of seat. Terminal-window seats (gtkwin.c, window.c) implement it by
calling the new stripctrl_new_term(), and console ones use the locale-
based stripctrl_new().
The idea of these is that they centralise the common idiom along the
lines of
if (logical_array_len >= physical_array_size) {
physical_array_size = logical_array_len * 5 / 4 + 256;
array = sresize(array, physical_array_size, ElementType);
}
which happens at a zillion call sites throughout this code base, with
different random choices of the geometric factor and additive
constant, sometimes forgetting them completely, and generally doing a
lot of repeated work.
The new macro sgrowarray(array,size,n) has the semantics: here are the
array pointer and its physical size for you to modify, now please
ensure that the nth element exists, so I can write into it. And
sgrowarrayn(array,size,n,m) is the same except that it ensures that
the array has size at least n+m (so sgrowarray is just the special
case where m=1).
Now that this is a single centralised implementation that will be used
everywhere, I've also gone to more effort in the implementation, with
careful overflow checks that would have been painful to put at all the
previous call sites.
This commit also switches over every use of sresize(), apart from a
few where I really didn't think it would gain anything. A consequence
of that is that a lot of array-size variables have to have their types
changed to size_t, because the macros require that (they address-take
the size to pass to the underlying function).
This replaces all the macros like ssh_key_sign() and win_draw_text()
which take an object containing a vtable pointer and do the
dereferencing to find the actual concrete method to call. Now they're
all inline functions, which means more sensible type-checking and more
comprehensible error reports when the types go wrong, and also means
that there's no risk of double-evaluating the object argument.
Previously, any double-width character would break the bidi algorithm,
because of the quirk of data representation in which we store UCSWIDE
(0xDFFF) in the right-hand termchar overlapped by the character.
UCSWIDE has bidirectional character class L according to minibidi's
getType(), so it disrupted the algorithm.
Now we remove UCSWIDE from the input line before passing it to
do_bidi(), replacing it with an 'nchars' field in the bidi_char
structure indicating single or double width, and put the UCSWIDEs back
afterwards once do_bidi returns.
Although I've reinstated the tedious manual mouse input, I can at
least reduce the amount of it that the user is required to provide:
the new PRNG has a hard limit on the size of its seed, so once we've
generated enough entropy to fill that up, there's no point in
collecting more, even if we're generating a particularly large key.
Now that all the call sites are expecting a size_t instead of an int
length field, it's no longer particularly difficult to make it
actually return the pointer,length pair in the form of a ptrlen.
It would be nice to say that simplifies call sites because those
ptrlens can all be passed straight along to other ptrlen-consuming
functions. Actually almost none of the call sites are like that _yet_,
but this makes it possible to move them in that direction in future
(as part of my general aim to migrate ptrlen-wards as much as I can).
But also it's just nicer to keep the pointer and length together in
one variable, and not have to declare them both in advance with two
extra lines of boilerplate.
This is a general cleanup which has been overdue for some time: lots
of length fields are now the machine word type rather than the (in
practice) fixed 'int'.
This tears out the entire previous random-pool system in sshrand.c. In
its place is a system pretty close to Ferguson and Schneier's
'Fortuna' generator, with the main difference being that I use SHA-256
instead of AES for the generation side of the system (rationale given
in comment).
The PRNG implementation lives in sshprng.c, and defines a self-
contained data type with no state stored outside the object, so you
can instantiate however many of them you like. The old sshrand.c still
exists, but in place of the previous random pool system, it's just
become a client of sshprng.c, whose job is to hold a single global
instance of the PRNG type, and manage its reference count, save file,
noise-collection timers and similar administrative business.
Advantages of this change include:
- Fortuna is designed with a more varied threat model in mind than my
old home-grown random pool. For example, after any request for
random numbers, it automatically re-seeds itself, so that if the
state of the PRNG should be leaked, it won't give enough
information to find out what past outputs _were_.
- The PRNG type can be instantiated with any hash function; the
instance used by the main tools is based on SHA-256, an improvement
on the old pool's use of SHA-1.
- The new PRNG only uses the completely standard interface to the
hash function API, instead of having to have privileged access to
the internal SHA-1 block transform function. This will make it
easier to revamp the hash code in general, and also it means that
hardware-accelerated versions of SHA-256 will automatically be used
for the PRNG as well as for everything else.
- The new PRNG can be _tested_! Because it has an actual (if not
quite explicit) specification for exactly what the output numbers
_ought_ to be derived from the hashes of, I can (and have) put
tests in cryptsuite that ensure the output really is being derived
in the way I think it is. The old pool could have been returning
any old nonsense and it would have been very hard to tell for sure.
The upcoming PRNG revamp will want to tell noise sources apart, so
that it can treat them all fairly. So I've added an extra parameter to
noise_ultralight and random_add_noise, which takes values in an
enumeration covering all the vague classes of entropy source I'm
collecting. In this commit, though, it's simply ignored.
This is in preparation for a PRNG revamp which will want to have a
well defined boundary for any given request-for-randomness, so that it
can destroy the evidence afterwards. So no more looping round calling
random_byte() and then stopping when we feel like it: now you say up
front how many random bytes you want, and call random_read() which
gives you that many in one go.
Most of the call sites that had to be fixed are fairly mechanical, and
quite a few ended up more concise afterwards. A few became more
cumbersome, such as mp_random_bits, in which the new API doesn't let
me load the random bytes directly into the target integer without
triggering undefined behaviour, so instead I have to allocate a
separate temporary buffer.
The _most_ interesting call site was in the PKCS#1 v1.5 padding code
in sshrsa.c (used in SSH-1), in which you need a stream of _nonzero_
random bytes. The previous code just looped on random_byte, retrying
if it got a zero. Now I'm doing a much more interesting thing with an
mpint, essentially scaling a binary fraction repeatedly to extract a
number in the range [0,255) and then adding 1 to it.
A long time ago, in commit 4d77b6567, I moved the generation of the
arrow-key escape sequences into a function format_arrow_key(). Mostly
the reason for that was a special purpose I had in mind at the time
which involved auto-generating the same sequences in response to
things other than a keypress, but I always thought it would be nice to
centralise a lot more of PuTTY's complicated keyboard handling in the
same way - at least the handling of the function keys and their
numerous static and dynamic config options.
In this year's general spirit of tidying up and refactoring, I think
it's finally time. So here I introduce three more centralised
functions for dealing with the numbered function keys, the small
keypad (Ins, Home, PgUp etc) and the numeric keypad. Lots of horrible
and duplicated code from the key handling functions in window.c and
gtkwin.c is now more sensibly centralised: each platform keyboard
handler concerns itself with the local format of a keyboard event and
platform-specific enumeration of key codes, and once it's decided what
the logical key press actually _is_, it hands off to the new functions
in terminal.c to generate the appropriate escape code.
Mostly this is intended to be a refactoring without functional change,
leaving the keyboard handling how it's always been. But in cases where
the Windows and GTK handlers were accidentally inconsistent, I've
fixed the inconsistency rather than carefully keeping both sides how
they were. Known consistency fixes:
- swapping the arrow keys between normal (ESC [ A) and application
(ESC O A) is now done by pressing Ctrl with them, and _not_ by
pressing Shift. That was how it was always supposed to work, and
how it's worked on GTK all along, but on Windows it's been done by
Shift as well since 2010, due to a bug at the call site of
format_arrow_key() introduced when I originally wrote that function.
- in Xterm function key mode plus application keypad mode, the /*-
keys on the numeric keypad now send ESC O {o,j,m} in place of ESC O
{Q,R,S}. That's how the Windows keyboard handler has worked all
along (it was a deliberate behaviour tweak for the Xterm-like
function key mode, because in that mode ESC O {Q,R,S} are generated
by F2-F4). But the GTK keyboard handler omitted that particular
special case and was still sending ESC O {Q,R,S} for those keys in
all application keypad modes.
- also in Xterm function key mode plus app keypad mode, we only
generates the app-keypad escape sequences if Num Lock is on; with
Num Lock off, the numeric keypad becomes arrow keys and
Home/End/etc, just as it would in non-app-keypad mode. Windows has
done this all along, but again, GTK lacked that special case.
This is mostly to make static analysers and compiler warnings a bit
happier - now they know that a call to, say, modalfatalbox() means
they don't have to worry about what the rest of the function will do.
This is another cleanup I felt a need for while I was doing
boolification. If you define a function or variable in one .c file and
declare it extern in another, then nothing will check you haven't got
the types of the two declarations mismatched - so when you're
_changing_ the type, it's a pain to make sure you've caught all the
copies of it.
It's better to put all those extern declarations in header files, so
that the declaration in the header is also in scope for the
definition. Then the compiler will complain if they don't match, which
is what I want.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
I think this is the full set of things that ought logically to be
boolean.
One annoyance is that quite a few radio-button controls in config.c
address Conf fields that are now bool rather than int, which means
that the shared handler function can't just access them all with
conf_{get,set}_int. Rather than back out the rigorous separation of
int and bool in conf.c itself, I've just added a similar alternative
handler function for the bool-typed ones.
It's not actually used anywhere yet, though. This is just adding the
accessor functions, which will enforce a rigorous separation between
conf keys typed as int and as bool.
This commit includes <stdbool.h> from defs.h and deletes my
traditional definitions of TRUE and FALSE, but other than that, it's a
100% mechanical search-and-replace transforming all uses of TRUE and
FALSE into the C99-standardised lowercase spellings.
No actual types are changed in this commit; that will come next. This
is just getting the noise out of the way, so that subsequent commits
can have a higher proportion of signal.
After the recent Seat and LogContext revamps, _nearly_ all the
remaining uses of the type 'Frontend' were in terminal.c, which needs
all sorts of interactions with the GUI window the terminal lives in,
from the obvious (actually drawing text on the window, reading and
writing the clipboard) to the obscure (minimising, maximising and
moving the window in response to particular escape sequences).
All of those functions are now provided by an abstraction called
TermWin. The few remaining uses of Frontend after _that_ are internal
to a particular platform directory, so as to spread the implementation
of that particular kind of Frontend between multiple source files; so
I've renamed all of those so that they take a more specifically named
type that refers to the particular implementation rather than the
general abstraction.
So now the name 'Frontend' no longer exists in the code base at all,
and everywhere one used to be used, it's completely clear whether it
was operating in one of Frontend's three abstract roles (and if so,
which), or whether it was specific to a particular implementation.
Another type that's disappeared is 'Context', which used to be a
typedef defined to something different on each platform, describing
whatever short-lived resources were necessary to draw on the terminal
window: the front end would provide a ready-made one when calling
term_paint, and the terminal could request one with get_ctx/free_ctx
if it wanted to do proactive window updates. Now that drawing context
lives inside the TermWin itself, because there was never any need to
have two of those contexts live at the same time.
(Another minor API change is that the window-title functions - both
reading and writing - have had a missing 'const' added to their char *
parameters / return values.)
I don't expect this change to enable any particularly interesting new
functionality (in particular, I have no plans that need more than one
implementation of TermWin in the same application). But it completes
the tidying-up that began with the Seat and LogContext rework.
In the very old days, when PuTTY was new and computers were slow, I
tried to implement a feature where scrolling the window would be
implemented using a fast rectangle-copy GDI operation, rather than an
expensive character-by-character redraw of all the changed areas.
It never quite worked right, and I ended up conditioning it out on
Windows, and never even tried to implement it on GTK. It's now been
sitting around unused for so long that I think it's no longer worth
keeping in the code at all - if I tried to put it back in, it surely
wouldn't even compile, and would need rewriting from scratch anyway.
Disturbingly, it looks as if I _tried_ to re-enable it at one point,
in that there was a '#define OPTIMISE_IS_SCROLL 1' in putty.h - but
that never had any effect, because the macro name is misspelled. All
the #ifdefs are for 'OPTIMISE_SCROLL', without the 'IS'. So despite
appearances, it really _has_ been conditioned out all along!
The main wildcard matching code now doesn't depend on having a NUL
terminator in the string to be matched; instead it works with a pair
of pointers, one working along the string as we match, and the other
identifying the end of the string, and tests that p < target_end
before dereferencing p. User-facing entry points now allow you to pass
either an ordinary ASCIZ const char * or a ptrlen, and set up
target_end accordingly.
For the moment, the _wildcard_ parameter still has to be an ordinary
null-terminated string, but who knows, maybe that will have to change
too at some later point.
Previously, it returned a human-readable string suitable for log
files, which tried to say something useful about the remote end of a
socket. Now it returns a whole SocketPeerInfo structure, of which that
human-friendly log string is just one field, but also some of the same
information - remote IP address and port, in particular - is provided
in machine-readable form where it's available.
That's more directly useful in uxpty.c (which is currently the only
actual client of the function), and also matches the data that SSH
clients send in "pty-req". Also, it makes that method behave more like
the GUI query function get_window_pixels used by terminal.c (with the
sole exception that unlike g_w_p it's allowed to return failure), so
it becomes even more trivial to implement in the GUI front ends.
This is in much the same style as the ttymodes revamp, using a header
file which can be included in different ways to either iterate over
_all_ the signals in the known list or just the ones for which a
definition exists on the target OS.
So this doesn't actually _remove_ the horrid pile of ifdefs in
mainchan_rcvd_exit_signal, but at least it puts it somewhere less
intrusive and more reusable.
This gets another big pile of logic out of ssh2connection and puts it
somewhere more central. Now the only thing left in ssh2connection is
the formatting and parsing of the various channel requests; the logic
deciding which ones to issue and what to do about them is devolved to
the Channel implementation, as it properly should be.
A function to compare two strings _both_ in ptrlen form (I've had
ptrlen_eq_string for ages, but for some reason, never quite needed
ptrlen_eq_ptrlen). A function to ask whether one ptrlen starts with
another (and, optionally, return a ptrlen giving the remaining part of
the longer string). And the va_list version of logeventf, which I
really ought to have written in the first place by sheer habit, even
if it was only needed by logeventf itself.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
This was used by ldisc to communicate back to the front end that a key
had been pressed (or rather, that a keypress had caused a nonzero
amount of session input data). Its only nontrivial implementation was
in gtkwin.c, which used that notification to implement the Unix GUI's
"close window on keypress, if the session was already over" policy.
(Which in turn is Unix-specific, because the rationale is that
sometimes X servers don't have a functioning window manager, so it's
useful to have a way of telling any application to close without using
WM-provided facilities like a close button.)
But gtkwin.c doesn't need to be told by the ldisc that a keypress
happened - it's the one _sending_ those keypresses to ldisc in the
first place! So I've thrown away the three stub implementations of
frontend_keypress, removed the call to it in ldisc.c, and replaced it
with calls in gtkwin.c at all the points during keypress handling
that call ldisc_send.
A visible effect is that pterm's close-on-keypress behaviour will now
only trigger on an actual (input-generating) _keypress_, and not on
other input generation such as a paste action. I think that's an
improvement.
One quite recent - an unused variable in the Windows code that was
obsoleted by commit cea1329b9 last month - and one not recent at all,
namely the obsolete declaration of begin_session() in putty.h that
hasn't existed since commit 7a79df8fe replaced it with the ldisc
system in *2001*!
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
It's never set to anything but NULL at any call site, and there's been
a FIXME comment in uxucs.c for ages saying it should be removed. I
think it only existed in the first place because it was a facility
supported by the underlying Windows API function and we couldn't see a
reason _not_ to pass it through. But I'm cleaning up FIXMEs, so we
should get rid of it.
(It stood for 'default used', incidentally - as in 'did the function
at any point have to make use of the parameter providing a default
fallback character?'. Nothing to do with _defusing_ things :-)
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
It is useful to be able to exclude the header so that the log file
can be used for realtime input to other programs such as Kst for
plotting live data from sensors.
We define a macro in terms of INT_MAX, so we ought to include
<limits.h> to ensure INT_MAX is defined, rather than depending on
every call site to have remembered to do that themselves.
In order to list cross-certifiable host keys in the GUI specials menu,
the SSH backend has been inventing new values on the end of the
Telnet_Special enumeration, starting from the value TS_LOCALSTART.
This is inelegant, and also makes it awkward to break up special
handlers (e.g. to dispatch different specials to different SSH
layers), since if all you know about a special is that it's somewhere
in the TS_LOCALSTART+n space, you can't tell what _general kind_ of
thing it is. Also, if I ever need another open-ended set of specials
in future, I'll have to remember which TS_LOCALSTART+n codes are in
which set.
So here's a revamp that causes every special to take an extra integer
argument. For all previously numbered specials, this argument is
passed as zero and ignored, but there's a new main special code for
SSH host key cross-certification, in which the integer argument is an
index into the backend's list of available keys. TS_LOCALSTART is now
a thing of the past: if I need any other open-ended sets of specials
in future, I can add a new top-level code with a nicely separated
space of arguments.
While I'm at it, I've removed the legacy misnomer 'Telnet_Special'
from the code completely; the enum is now SessionSpecialCode, the
struct containing full details of a menu entry is SessionSpecial, and
the enum values now start SS_ rather than TS_.
Originally, it controlled whether ssh.c should send terminal messages
(such as login and password prompts) to terminal.c or to stderr. But
we've had the from_backend() abstraction for ages now, which even has
an existing flag to indicate that the data is stderr rather than
stdout data; applications which set FLAG_STDERR are precisely those
that link against uxcons or wincons, so from_backend will do the
expected thing anyway with data sent to it with that flag set. So
there's no reason ssh.c can't just unconditionally pass everything
through that, and remove the special case.
FLAG_STDERR was also used by winproxy and uxproxy to decide whether to
capture standard error from a local proxy command, or whether to let
the proxy command send its diagnostics directly to the usual standard
error. On reflection, I think it's better to unconditionally capture
the proxy's stderr, for three reasons. Firstly, it means proxy
diagnostics are prefixed with 'proxy:' so that you can tell them apart
from any other stderr spew (which used to be particularly confusing if
both the main application and the proxy command were instances of
Plink); secondly, proxy diagnostics are now reliably copied to packet
log files along with all the other Event Log entries, even by
command-line tools; and thirdly, this means the option to suppress
proxy command diagnostics after the main session starts will actually
_work_ in the command-line tools, which it previously couldn't.
A more minor structure change is that copying of Event Log messages to
stderr in verbose mode is now done by wincons/uxcons, instead of
centrally in logging.c (since logging.c can now no longer check
FLAG_STDERR to decide whether to do it). The total amount of code to
do this is considerably smaller than the defensive-sounding comment in
logevent.c explaining why I did it the other way instead :-)
