advertise so that the server can't exceed our maximum packet size.
Enable it for "1.36_sshlib GlobalSCAPE" which apparently sends oversize
packets otherwise.
[originally from svn r7804]
port number in the GUI when the connection type is changed if the current
port number is the standard one for the current protocol.
It's not perfect, but it should make the common case of tabbing through the
Session panel easier when starting non-SSH connections on odd ports.
[originally from svn r7635]
Should be no significant change in behaviour.
(Well, entering usernames containing commas on Plink's command line will be
a little harder now.)
[originally from svn r7628]
(SSH tunnels, TTY modes, and environment variables), when the Remove button is
pressed, populate the edit controls from the entry that has just been deleted.
Several users have requested this, as it makes editing an entry easier (read-
modify-write) in the cases where order is unimportant, and also provides a
degree of undo-ability.
[originally from svn r7298]
launchable session without getting confused by it, we can relax the
restriction on storing a host name in DS, which has attracted a
steady stream of complaints over the past six or seven years.
[originally from svn r7266]
represent a launchable session, unless the user can be construed to
have really meant it. This means:
- starting up PuTTY when the Default Settings are launchable still
brings up the config box, and you have to hit Open to actually
launch that session
- double-clicking on Default Settings from the config box will load
them but not launch them.
On the other hand:
- explicitly loading the Default Settings on the command line using
`-load' _does_ still launch them.
[originally from svn r7265]
We now have an option where a remote window title query returns a well-formed
response containing the empty string. This should keep stop any server-side
application that was expecting a response from hanging, while not permitting
the response to be influenced by an attacker.
We also retain the ability to stay schtum. The existing checkbox has thus
grown into a set of radio buttons.
I've changed the default to the "empty string" response, even in the backward-
compatibility mode of loading old settings, which is a change in behaviour;
any users who want the old behaviour back will have to explicitly select it. I
think this is probably the Right Thing. (The only drawback I can think of is
that an attacker could still potentially use the relevant fixed strings for
mischief, but we already have other, similar reports.)
[originally from svn r7043]
in an SSH connection _in addition_ to the decrypted packets. This
will hopefully come in useful for debugging wire data corruption
issues: you can strace the server, enable this mode in the client,
and compare the sent and received data.
I'd _like_ to have this mode also log Diffie-Hellman private
exponents, session IDs, encryption and MAC keys, so that the
resulting log file could be used to independently verify the
correctness of all cryptographic operations performed by PuTTY.
However, I haven't been able to convince myself that the security
implications are acceptable. (It doesn't matter that this
information would permit an attacker to decrypt the session, because
the _already_ decrypted session is stored alongside it in the log
file. And I'm not planning, under any circumstances, to log users'
private keys. But gaining access to the log file while the session
was still running would permit an attacker to _hijack_ the session,
and that's the iffy bit.)
[originally from svn r6835]
in place of making a network connection. This has involved a couple
of minor infrastructure changes:
- New dlg_label_change() function in the dialog.h interface, which
alters the label on a control. Only used, at present, to switch
the Host Name and Port boxes into Serial Line and Speed, which
means that any platform not implementing serial connections (i.e.
currently all but Windows) does not need to actually do anything
in this function. Yet.
- New small piece of infrastructure: cfg_launchable() determines
whether a Config structure describes a session ready to be
launched. This was previously determined by seeing if it had a
non-empty host name, but it has to check the serial line as well
so there's a centralised function for it. I haven't gone through
all front ends and arranged for this function to be used
everywhere it needs to be; so far I've only checked Windows.
- Similarly, cfg_dest() returns the destination of a connection
(host name or serial line) in a text format suitable for putting
into messages such as `Unable to connect to %s'.
[originally from svn r6815]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
in the session name box. Thwarted on Unix by GTK not automatically
scrolling the listbox to the selected item, but we can fix that in
the platform-specific side later.
[originally from svn r6337]
there are servers which could in principle operate in this mode, although I
don't know if any do in practice. (Hence, I haven't been able to test it.)
[originally from svn r5748]
[this svn revision also touched putty-wishlist]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
that the global `sesslist' got out of sync with the saved-sessions submenu,
causing the latter to launch the wrong sessions.
Also, Change Settings wasn't getting a fresh session list, so if the set of
sessions had changed since session startup it wouldn't reflect that (at least
until a session was saved). Fixed (on all platforms).
Therefore, since the global sesslist didn't seem to be useful, I've got rid
of it; config.c creates one as needed, as do the frontends. (Not tried
compiling Mac changes.)
Also, we now build the saved-sessions submenu on demand on Windows and Unix.
(This should probably also be done on the Mac.)
[originally from svn r5609]
discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol
version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com
implementations in this scheme). <http://www.snailbook.com/terms.html>
[originally from svn r5480]
cfg.remote_cmd is to be used, rather than actually pointing at
cfg.remote_cmd. This change restores the ability to structure-copy
Configs without breaking them. (Though of course this is only a
temporary solution: really what wants doing is to fix
`config-struct'.)
[originally from svn r5335]
deal with rekeys at all: they totally ignore mid-session KEXINIT
sent by the client. Hence, a new bug entry so we don't try it.
[originally from svn r5092]
the config should do when IPv6 is configured out. They shouldn't sit
there looking silly with only `Auto' and `IPv4' settings: they
should instead be completely absent. I had thought the former was
acceptable since IPv4-only was a configuration that people should
only be using if their compilers didn't support IPv6, but now it
occurs to me that ports to fundamentally non-IPv6-supporting
platforms are not implausible, and on such ports the presence of a
vestigial config option under the _standard_ build conditions would
be a low-quality solution.
[originally from svn r5084]
mid-session in SSH2: this forces an immediate rekey to activate the
new settings. I'm not sure exactly what this will be useful for
(except possibly it might make comparative performance testing
easier?), but it has wonderful James Bond value for being able to
switch to a more secure cipher before doing anything sensitive :-)
If, that is, you weren't using the most secure one to begin with...
[originally from svn r5051]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
to manipulate settings they can't see so could lead to confusion. (Also remove
"Delete" button for some sort of UI consistency even though it's harmless.)
Also conditionalise other aspects of sessionsaver_handler() that don't make
sense mid-session.
[originally from svn r5043]
mid-session if we are not using SSHv1. I've done this by introducing
a generic `cfg_info' function which every back end can use to
communicate an int's worth of data to setup_config_box; in SSH
that's the protocol version in use, and in everything else it's
currently zero.
[originally from svn r5040]
[r5031 == d77102a8d5]
the difficult questions about when it's sensible to offer the option
of saving to the slot we loaded from: _we never do_. The user must
always explicitly specify a slot to save to.
[originally from svn r5035]
[this svn revision also touched putty-wishlist]
bit is working out when to reschedule the next rekey for when the
timeout or data limit changes; sometimes it will be _right now_
because we're already over the new limit.
Still to do: the Kex panel should not appear in mid-session if we
are using SSHv1.
[originally from svn r5031]
Change Settings, the port forwarding setup function is run again,
and tags all existing port forwardings as `do not keep'. Then it
iterates through the config in the normal way; when it encounters a
port forwarding which is already in the tree, it tags it `keep'
rather than setting it up from scratch. Finally, it goes through the
tree and removes any that haven't been labelled `keep'. Hence,
editing the list of forwardings in Change Settings has the effect of
cancelling any forwardings you remove, and adding any new ones.
The SSH panel now appears in the reconfig box, and is empty apart
from a message explaining that it has to be there for subpanels of
it to exist. Better wording for this message would be welcome.
[originally from svn r5030]
(which will gain more content anon).
Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never
did find a way of automatically detecting this alleged server bug, and in any
case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW).
Also generalise askcipher() to a new askalg() (thus touching all the
front-ends).
I've made some attempt to document what SSH key exchange is and why you care,
but it could use some review for clarity (and outright lies).
[originally from svn r5022]
results in unacceptable performance for him on Win2000. Add a checkbox to
revert to the old behaviour.
[originally from svn r4988]
[this svn revision also touched putty-wishlist]
sessionsaver_handler after processing a one-click saved session
launch, to protect against accidentally calling dlg_end twice on the
same dialog.
[originally from svn r4779]
into the Connection panel, and implemented support for the SSH2
"env" request. (I haven't yet found a server which accepts this
request, so although I've visually checked the packet log and it
looks OK, I haven't yet been able to do a full end-to-end test.)
Also, the `pty' backend reads this data and does a series of
`putenv' commands before launching the shell or application.
This is mostly because in last week's UTF-8 faffings I got
thoroughly sick of typing `export LANG=en_GB.UTF-8' every time I
started a new testing pterm, and it suddenly occurred to me that
this would be precisely the sort of thing you'd want to have pterm
set up for you, particularly since you can configure it alongside
the translation settings and so you can ensure they match up
properly.
[originally from svn r4645]
