Thanks to Jiri Kaspar for sending this patch (apart from the new docs
section, which is in my own words), which implements a feature we've
had as a wishlist item ('utf8-plus-vt100') for a long time.
I was actually surprised it was possible to implement it in so few
lines of code! I'd forgotten, or possibly never noticed in the first
place, that even in UTF-8 mode PuTTY not only accepts but still
_processes_ all the ISO 2022 control sequences and shift characters,
and keeps running track of all the same state in term->cset and
term->cset_attrs that it tracks in IS0-2022-enabled modes. It's just
that in UTF-8 mode, at the very last minute when a character+attribute
pair is about to be written into the terminal's character buffer, it
deliberately ignores the contents of those variables.
So all that was needed was a new flag checked at that last moment
which causes it not quite to ignore them after all, and bingo,
utf8-plus-vt100 is supported. And it works no matter which ISO 2022
sequences you're using; whether you're using ESC ( 0 to select the
line drawing set directly into GL and ESC ( B to get back when you're
done, or whether you send a preliminary ESC ( B ESC ) 0 to get GL/GR
to be ASCII and line drawing respectively so you can use SI and SO as
one-byte mode switches thereafter, both work just as well.
This implementation strategy has a couple of consequences, which I
don't think matter very much one way or the other but I document them
just in case they turn out to be important later:
- if an application expecting this mode has already filled your
terminal window with lqqqqqqqqk, then enabling this mode in Change
Settings won't retroactively turn them into the line drawing
characters you wanted, because no memory is preserved in the screen
buffer of what the ISO 2022 state was when they were printed. So
the application still has to do a screen refresh.
- on the other hand, if you already sent the ESC ( 0 or whatever to
put the terminal _into_ line drawing mode, and then you turn on
this mode in Change Settings, you _will_ still be in line drawing
mode, because the system _does_ remember your current ISO 2022
state at all times, whether it's currently applying it to output
printing characters or not.
The former has advantages in terms of keeping Kerberos credentials up
to date, but it also does something sufficiently weird to the usual
SSH host key system that I think it's worth making sure users have a
means of turning it off separately from the less intrusive GSS
userauth.
This was originally sent in as part of the GSSAPI patch, but I've
extracted into a separate commit because that patch was more than
complicated enough by itself.
This is a heavily edited (by me) version of a patch originally due to
Nico Williams and Viktor Dukhovni. Their comments:
* Don't delegate credentials when rekeying unless there's a new TGT
or the old service ticket is nearly expired.
* Check for the above conditions more frequently (every two minutes
by default) and rekey when we would delegate credentials.
* Do not rekey with very short service ticket lifetimes; some GSSAPI
libraries may lose the race to use an almost expired ticket. Adjust
the timing of rekey checks to try to avoid this possibility.
My further comments:
The most interesting thing about this patch to me is that the use of
GSS key exchange causes a switch over to a completely different model
of what host keys are for. This comes from RFC 4462 section 2.1: the
basic idea is that when your session is mostly bidirectionally
authenticated by the GSSAPI exchanges happening in initial kex and
every rekey, host keys become more or less vestigial, and their
remaining purpose is to allow a rekey to happen if the requirements of
the SSH protocol demand it at an awkward moment when the GSS
credentials are not currently available (e.g. timed out and haven't
been renewed yet). As such, there's no need for host keys to be
_permanent_ or to be a reliable identifier of a particular host, and
RFC 4462 allows for the possibility that they might be purely
transient and only for this kind of emergency fallback purpose.
Therefore, once PuTTY has done a GSS key exchange, it disconnects
itself completely from the permanent host key cache functions in
storage.h, and instead switches to a _transient_ host key cache stored
in memory with the lifetime of just that SSH session. That cache is
populated with keys received from the server as a side effect of GSS
kex (via the optional SSH2_MSG_KEXGSS_HOSTKEY message), and used if
later in the session we have to fall back to a non-GSS key exchange.
However, in practice servers we've tested against do not send a host
key in that way, so we also have a fallback method of populating the
transient cache by triggering an immediate non-GSS rekey straight
after userauth (reusing the code path we also use to turn on OpenSSH
delayed encryption without the race condition).
Rewrite the "Using PuTTY" section for 'clipboard-generality', and also
explain why we default to mouse-based selection, interaction with other
applications via PRIMARY when running PuTTY on Unix, and bracketed-paste
mode. Also add lots of index terms.
On all platforms, you can now configure which clipboard the mouse
pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which
Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are:
- nothing at all
- a clipboard which is implicitly written by the act of mouse
selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else)
- the standard clipboard written by explicit copy/paste UI actions
(CLIPBOARD on X, the unique system clipboard elsewhere).
Also, you can control whether selecting text with the mouse _also_
writes to the explicitly accessed clipboard.
The wording of the various messages changes between platforms, but the
basic UI shape is the same everywhere.
This makes space in the Selection panel (at least on Windows; it
wasn't overfull on Unix) to add a new set of config options
controlling the mapping of UI actions to clipboards.
(A possible future advantage of having spare space in this new Words
panel is that there's room to add controls for context-sensitive
special-casing, e.g. I'd quite like ':' to be treated differently when
it appears as part of "http://".)
I know some users don't like any colour _at all_, and we have a
separate option to turn off xterm-style 256-colour sequences, so it
seems remiss not to have an option to disable true colour as well.
2ce0b680c inadvertently removed this ability in trying to ensure that
everyone got the new IUTF8 mode by default; you could remove a mode from
the list in the UI, but this would just revert PuTTY to its default.
The UI and storage have been revamped; the storage format now explicitly
says when a mode is not to be sent, and the configuration UI always
shows all modes known to PuTTY; if a mode is not to be sent it now shows
up as "(don't send)" in the list.
Old saved settings are migrated so as to preserve previous removals of
longstanding modes, while automatically adding IUTF8.
(In passing, this removes a bug where pressing the 'Remove' button of
the previous UI would populate the value edit box with garbage.)
Also try to upgrade the settings of people who haven't changed the
defaults; but anyone who has, or anyone who's used the pre-release
snapshots with elliptic-curve support, will have to review their
settings manually.
The UI now only has "1" and "2" options for SSH protocol version, which
behave like the old "1 only" and "2 only" options; old
SSH-N-with-fallback settings are interpreted as SSH-N-only.
This prevents any attempt at a protocol downgrade attack.
Most users should see no difference; those poor souls who still have to
work with SSH-1 equipment now have to explicitly opt in.
Now we actually have enough of them to worry about, and especially
since some of the types we support are approved by organisations that
people might make their own decisions about whether to trust, it seems
worth having a config list for host keys the same way we have one for
kex types and ciphers.
To make room for this, I've created an SSH > Host Keys config panel,
and moved the existing host-key related configuration (manually
specified fingerprints) into there from the Kex panel.
It's too esoteric to be the first thing on the Auth panel; I've never
heard of any SSH server that supports it in the decade since I
implemented it. The only Google hits are lost souls mistakenly believing
they need it for passwordless public-key login and the like.
Users have requested this from time to time, for distinguishing log
file names when there's more than one SSH server running on different
ports of the same host. Since we do take account of that possibility
in other areas (e.g. we cache host keys indexed by (host,port) rather
than just host), it doesn't seem unreasonable to do so here too.
PuTTY now uses the updated version of Diffie-Hellman group exchange,
except for a few old OpenSSH versions which Darren Tucker reports only
support the old version.
FIXME: this needs further work because the Bugs config panel has now
overflowed.
It would be rare to have a host keypair in .ppk format or on a client
machine to load into PuTTYgen, and it might confuse people into thinking
they are required to do so.
I've shifted away from using the SVN revision number as a monotonic
version identifier (replacing it in the Windows version resource with
a count of days since an arbitrary epoch), and I've removed all uses
of SVN keyword expansion (replacing them with version information
written out by Buildscr).
While I'm at it, I've done a major rewrite of the affected code which
centralises all the computation of the assorted version numbers and
strings into Buildscr, so that they're all more or less alongside each
other rather than scattered across multiple source files.
I've also retired the MD5-based manifest file system. A long time ago,
it seemed like a good idea to arrange that binaries of PuTTY would
automatically cease to identify themselves as a particular upstream
version number if any changes were made to the source code, so that if
someone made a local tweak and distributed the result then I wouldn't
get blamed for the results. Since then I've decided the whole idea is
more trouble than it's worth, so now distribution tarballs will have
version information baked in and people can just cope with that.
[originally from svn r10262]
This option is available from the command line as '-hostkey', and is
also configurable through the GUI. When enabled, it completely
replaces all of the automated host key management: the server's host
key will be checked against the manually configured list, and the
connection will be allowed or disconnected on that basis, and the host
key store in the registry will not be either consulted or updated.
The main aim is to provide a means of automatically running Plink,
PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER
isn't available to have stored the right host key in. But it also
permits you to specify a list of multiple host keys, which means a
second use case for the same mechanism will probably be round-robin
DNS names that select one of several servers with different host keys.
Host keys can be specified as the standard MD5 fingerprint or as an
SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is
more unwieldy, especially with Windows command-line length limits, but
provides a means of specifying the _whole_ public key in case you
don't trust MD5. I haven't bothered to provide an analogous mechanism
for SSH-1, on the basis that anyone worrying about MD5 should have
stopped using SSH-1 already!)
[originally from svn r10220]
We now expect that after the server has sent us CHANNEL_CLOSE, we
should not expect to see any replies to our outstanding channel
requests, and conversely after we have sent CHANNEL_CLOSE we avoid
sending any reply to channel requests from the server. This was the
consensus among implementors discussing the problem on ietf-ssh in
April 2014.
To cope with current OpenSSH's (and perhaps other servers we don't
know about yet) willingness to send request replies after
CHANNEL_CLOSE, I introduce a bug-compatibility flag which is detected
for every OpenSSH version up to and including the current 6.6 - but
not beyond, since https://bugzilla.mindrot.org/show_bug.cgi?id=1818
promises that 6.7 will also implement the new consensus behaviour.
[originally from svn r10200]
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
