I've shifted away from using the SVN revision number as a monotonic
version identifier (replacing it in the Windows version resource with
a count of days since an arbitrary epoch), and I've removed all uses
of SVN keyword expansion (replacing them with version information
written out by Buildscr).
While I'm at it, I've done a major rewrite of the affected code which
centralises all the computation of the assorted version numbers and
strings into Buildscr, so that they're all more or less alongside each
other rather than scattered across multiple source files.
I've also retired the MD5-based manifest file system. A long time ago,
it seemed like a good idea to arrange that binaries of PuTTY would
automatically cease to identify themselves as a particular upstream
version number if any changes were made to the source code, so that if
someone made a local tweak and distributed the result then I wouldn't
get blamed for the results. Since then I've decided the whole idea is
more trouble than it's worth, so now distribution tarballs will have
version information baked in and people can just cope with that.
[originally from svn r10262]
This option is available from the command line as '-hostkey', and is
also configurable through the GUI. When enabled, it completely
replaces all of the automated host key management: the server's host
key will be checked against the manually configured list, and the
connection will be allowed or disconnected on that basis, and the host
key store in the registry will not be either consulted or updated.
The main aim is to provide a means of automatically running Plink,
PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER
isn't available to have stored the right host key in. But it also
permits you to specify a list of multiple host keys, which means a
second use case for the same mechanism will probably be round-robin
DNS names that select one of several servers with different host keys.
Host keys can be specified as the standard MD5 fingerprint or as an
SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is
more unwieldy, especially with Windows command-line length limits, but
provides a means of specifying the _whole_ public key in case you
don't trust MD5. I haven't bothered to provide an analogous mechanism
for SSH-1, on the basis that anyone worrying about MD5 should have
stopped using SSH-1 already!)
[originally from svn r10220]
We now expect that after the server has sent us CHANNEL_CLOSE, we
should not expect to see any replies to our outstanding channel
requests, and conversely after we have sent CHANNEL_CLOSE we avoid
sending any reply to channel requests from the server. This was the
consensus among implementors discussing the problem on ietf-ssh in
April 2014.
To cope with current OpenSSH's (and perhaps other servers we don't
know about yet) willingness to send request replies after
CHANNEL_CLOSE, I introduce a bug-compatibility flag which is detected
for every OpenSSH version up to and including the current 6.6 - but
not beyond, since https://bugzilla.mindrot.org/show_bug.cgi?id=1818
promises that 6.7 will also implement the new consensus behaviour.
[originally from svn r10200]
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
winadj@putty.projects.tartarus.org request. Not currently enabled
automatically, but should be usable as a manual workaround.
[originally from svn r9592]
Done in much the same way as it is in the GTK front end: the character
cell width is determined using the font's digits (which seems to give
generally not-too-offensive spacing in most cases, at the expense of
Ms and Ws typically overhanging a bit into adjacent cells) and each
character is centred in its cell. Overhangs never leave permanent
droppings on the window, because the existing work done in r5003
handles them just fine even in this stressful scenario.
There's a hacky new checkbox in the Appearance panel to make
variable-pitch fonts appear in the font selector (they still don't by
default, because I still think it's _usually_ not What You Want); the
checkbox state is not actually stored as part of a saved session, but
it should be automatically ticked when reloading a session that's got
a variable pitch font selected.
(I'm half-expecting a potential flurry of requests for this feature in
the wake of http://xkcd.com/840/ , so I thought I'd pre-empt them :-)
[originally from svn r9063]
[r5003 == ba470dec5e]
are now loaded from standard locations (system32 for SSPI, the
registry-stored MIT KfW install location for KfW) rather than using
the risky default DLL search path; I've therefore also added an
option to manually specify a GSS DLL we haven't heard of (which
should in principle Just Work provided it supports proper GSS-API as
specified in the RFC). The same option exists on Unix too, because
it seemed like too useful an idea to reserve to Windows. In
addition, GSSAPI is now documented, and also (unfortunately) its GUI
configuration has been moved out into a sub-subpanel on the grounds
that it was too big to fit in Auth.
[originally from svn r9003]
today reported an SSH2_MSG_UNIMPLEMENTED from a Cisco router which
looks as if it was triggered by SSH2_MSG_IGNORE, so I'm
experimentally putting this flag in. Currently must be manually
enabled, though if it turns out to solve the user's problem then
I'll probably add at least one version string...
[Edited commit message: actually, I also committed in error a piece
of experimental code as part of this checkin. Serve me right for not
running 'svn diff' first.]
[originally from svn r8926]
if we have no better ideas, with UI shamelessly stolen from Quest PuTTY.
Off by default, which effectively reverts the change to using the local
username by default that came in with GSSAPI support in r8138. Anyone wanting
seamless single sign-on will need to set the new option. (The previous
default behaviour was getting in the way in ad-hoc scenarios.)
Note that the PSCP and Unix-Plink behaviour of using the local username by
default have remained unchanged throughout; they are not affected by the new
option. Not sure if that's the Right Thing.
[originally from svn r8324]
[r8138 == de5dd9d65c]
strings more rigorously, and then we look up the local X authority
data in .Xauthority _ourself_ rather than delegating to an external
xauth program. This is (negligibly) more efficient on Unix, assuming
I haven't got it wrong in some subtle way, but its major benefit is
that we can now support X authority lookups on Windows as well
provided the user points us at an appropriate X authority file in
the standard format. A new Windows-specific config option has been
added for this purpose.
[originally from svn r8305]
on received data. Experiment and suggestion suggest that the character set
configuration applies equally to keystrokes sent to the server, or at least
that that's close enough to being true that we should document it as a first
approximation.
[originally from svn r8209]
to manually tweak the host name and port number under which the SSH
host key is read and written.
I've put it in the cross-platform Connection panel. Partly under the
flimsy pretext that other backends _can_ use it if they so wish (and
in fact it overrides the host name for title-bar purposes in all
network backends, though it has no other effect in anything but
SSH); but mostly because the SSH panel was too full already :-)
[originally from svn r8033]
advertise so that the server can't exceed our maximum packet size.
Enable it for "1.36_sshlib GlobalSCAPE" which apparently sends oversize
packets otherwise.
[originally from svn r7804]
We now have an option where a remote window title query returns a well-formed
response containing the empty string. This should keep stop any server-side
application that was expecting a response from hanging, while not permitting
the response to be influenced by an attacker.
We also retain the ability to stay schtum. The existing checkbox has thus
grown into a set of radio buttons.
I've changed the default to the "empty string" response, even in the backward-
compatibility mode of loading old settings, which is a change in behaviour;
any users who want the old behaviour back will have to explicitly select it. I
think this is probably the Right Thing. (The only drawback I can think of is
that an attacker could still potentially use the relevant fixed strings for
mischief, but we already have other, similar reports.)
[originally from svn r7043]
BUG_NEEDS_SSH1_PLAIN_PASSWORD do exactly what it says on the tin, independent
of whether BUG_CHOKES_ON_SSH1_IGNORE is set.
This is invisible in the default configuration, as all servers marked as having
the second bug have the first one too, but it would allow one to manually
configure PuTTY to cope with a SSH-1 server that got upset by ignore messages
during authentication, but was fine with their use as keepalives.
[originally from svn r6876]
- changes to Logging panel
- breaks in serial backend
(Plus, completely unrelated, an index term entry related to port forwarding
which seems to have been sitting around for ages, possibly waiting for me to
think about `see also' index terms in Halibut.)
[originally from svn r6836]
there): `plink host -nc host2:port' causes the SSH connection's main
channel to be replaced with a direct-tcpip connection to the
specified destination. This feature is mainly designed for use as a
local proxy: setting your local proxy command to `plink %proxyhost
-nc %host:%port' lets you tunnel SSH over SSH with a minimum of
fuss. Works on all platforms.
[originally from svn r6823]
in place of making a network connection. This has involved a couple
of minor infrastructure changes:
- New dlg_label_change() function in the dialog.h interface, which
alters the label on a control. Only used, at present, to switch
the Host Name and Port boxes into Serial Line and Speed, which
means that any platform not implementing serial connections (i.e.
currently all but Windows) does not need to actually do anything
in this function. Yet.
- New small piece of infrastructure: cfg_launchable() determines
whether a Config structure describes a session ready to be
launched. This was previously determined by seeing if it had a
non-empty host name, but it has to check the serial line as well
so there's a centralised function for it. I haven't gone through
all front ends and arranged for this function to be used
everywhere it needs to be; so far I've only checked Windows.
- Similarly, cfg_dest() returns the destination of a connection
(host name or serial line) in a text format suitable for putting
into messages such as `Unable to connect to %s'.
[originally from svn r6815]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
that the SSH-2 server is happy with. Fixed, and since I'm here, fix
`pubkeyfile-and-pageant' as well (for SSH-1 and SSH-2).
Also, in SSH-2, we now reexamine "methods that can continue" for every
Pageant key offer, which is technically more correct although it seems
unlikely that it was causing any real problems.
(It's not entirely pretty, but neither was the old code. We could probably
do with some sort of abstraction for public/private keys to avoid carting
lots of fiddly bits of data around.)
[originally from svn r6459]
[r6437 == 8719f92c14]
[this svn revision also touched putty-wishlist]
there are servers which could in principle operate in this mode, although I
don't know if any do in practice. (Hence, I haven't been able to test it.)
[originally from svn r5748]
[this svn revision also touched putty-wishlist]
SOCKS5 should always be able to do this, and I suspect our not doing so
dates from when the SOCKS proxy types were under a single configuration
option (pre-r3168).
[originally from svn r5654]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
This was a bit rushed, and could doubtless be improved.
Also fix a couple of things I noted on the way, including:
- "pscp -ls" wasn't documented
- Windows XP wasn't mentioned enough
[originally from svn r5593]
discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol
version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com
implementations in this scheme). <http://www.snailbook.com/terms.html>
[originally from svn r5480]
disabling the former is much more useful, and much safer, than disabling the
latter. The new wording on data-based rekeys might need some polishing.
[originally from svn r5222]
deal with rekeys at all: they totally ignore mid-session KEXINIT
sent by the client. Hence, a new bug entry so we don't try it.
[originally from svn r5092]
on a local port), the `Auto' protocol option on the Tunnels panel
should always produce a port you can connect to in _either_ of IPv4
and v6, because the aim is for the user not to have to know or care
which one they're using. This was not the case on Windows, and now
is. Also, updated the docs to give more detail on issues like this.
[originally from svn r5083]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
Change Settings, the port forwarding setup function is run again,
and tags all existing port forwardings as `do not keep'. Then it
iterates through the config in the normal way; when it encounters a
port forwarding which is already in the tree, it tags it `keep'
rather than setting it up from scratch. Finally, it goes through the
tree and removes any that haven't been labelled `keep'. Hence,
editing the list of forwardings in Change Settings has the effect of
cancelling any forwardings you remove, and adding any new ones.
The SSH panel now appears in the reconfig box, and is empty apart
from a message explaining that it has to be there for subpanels of
it to exist. Better wording for this message would be welcome.
[originally from svn r5030]
(which will gain more content anon).
Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never
did find a way of automatically detecting this alleged server bug, and in any
case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW).
Also generalise askcipher() to a new askalg() (thus touching all the
front-ends).
I've made some attempt to document what SSH key exchange is and why you care,
but it could use some review for clarity (and outright lies).
[originally from svn r5022]
results in unacceptable performance for him on Win2000. Add a checkbox to
revert to the old behaviour.
[originally from svn r4988]
[this svn revision also touched putty-wishlist]
line for every single .but file at the bottom of each page of the
HTML PuTTY docs. However, we can't _always_ replace that with a
single SVN revision, because there isn't always one available (SVN
still allows mixed working copies in which some files are
deliberately checked out against a different revision).
Hence, here's a mechanism for doing better. It uses `svnversion .'
to determine _whether_ a single revision number adequately describes
the current directory, and replaces all the version IDs with that if
so. If it can't do that, it uses the version IDs as before.
Also, this allows an explicit version string to be passed on the
make command line which will override _both_ these possibilities, so
that release documentation can be clearly labelled with the release
version number.
[originally from svn r4804]
- change click-by-click advice on modifying saved sessions
- add `Restart Session' as another reason you might not want to close the
window on exit; other tweaks to this language
- mention Shift-Backspace action
- the window resizing configuration documentation was completely out of
date; rewrite
- add a note about Default Bold Background since it's caused confusion
- "remote terminal" -> "remote system" in terminal-type doc
[originally from svn r4686]
(in the Windows version), and hopefully to clarify distinction between line
charset and local font, which has occasionally foxed me.
Cross-reference the Translation panel reference section from the intro
section in using.but and mention line-drawing characters there also.
[originally from svn r4654]
into the Connection panel, and implemented support for the SSH2
"env" request. (I haven't yet found a server which accepts this
request, so although I've visually checked the packet log and it
looks OK, I haven't yet been able to do a full end-to-end test.)
Also, the `pty' backend reads this data and does a series of
`putenv' commands before launching the shell or application.
This is mostly because in last week's UTF-8 faffings I got
thoroughly sick of typing `export LANG=en_GB.UTF-8' every time I
started a new testing pterm, and it suddenly occurred to me that
this would be precisely the sort of thing you'd want to have pterm
set up for you, particularly since you can configure it alongside
the translation settings and so you can ensure they match up
properly.
[originally from svn r4645]
PuTTY / Plink not to run a remote shell/command at all. Supported in
the GUI configuration and via the (OpenSSH-like) -N command-line
option.
No effort is currently made to arrange `nice' UI properties. If you
do this in GUI PuTTY, a full-size terminal window will still be
created, and will sit there with almost nothing in it throughout
your session. If you do it in Plink, Plink will not accept any kind
of request to terminate gracefully; you'll have to ^C or kill it.
Nonetheless, even this little will be useful to some people...
[originally from svn r4614]
- new function platform_get_x_display() to find a sensible local display.
On Unix, the Gtk apps weren't taking account of --display when
determining where to send forwarded X traffic.
- explicitly document that leaving X display location blank in config tries
to do something sensible (and that it's now blank by default)
- don't override X11Display setting in plink, since that's more properly
done later
[originally from svn r4604]
by default (although they can be included). There's also an option to remove
session data, which is good both for privacy and for reducing the size of
logfiles.
[originally from svn r4593]
No very good reason, but I've occasionally wanted to frob it to see if it
makes any difference to problems I'm having, and it was easy.
Tested that it does actually cause keepalives on Windows (with tcpdump);
should also work on Unix. Not implemented on Mac (does nothing), but then
neither is TCP_NODELAY.
Quite a big checkin, much of which is adding `keepalive' alongside `nodelay'
in network function calls.
[originally from svn r4309]
