If you select an entry in the saved sessions list box, but without
double-clicking to actually load it, and then you hit OK, the config-
box code will automatically load it. That just saves one click in a
common situation.
But in order to load that session, the config-box system first has to
ask the list-box control _which_ session is selected. On Windows, this
causes an assertion failure if the user has switched away from the
Session panel to some other panel of the config box, because when the
list box isn't on screen, its Windows control object is actually
destroyed.
I think a sensible answer is that we shouldn't be doing that implicit
load behaviour in any case if the list box isn't _visible_: silently
loading and launching a session someone selected a lot of UI actions
ago wasn't really the point. So now I make that behaviour only happen
when the list box (i.e. the Session panel) _is_ visible. That should
prevent the assertion failure on Windows, but the UI effect is cross-
platform, applying even on GTK where the control objects for invisible
panels persist and so the assertion failure didn't happen. I think
it's a reasonable UI change to make globally.
In order to implement it, I've had to invent a new query function so
that config.c can tell whether a given control is visible. In order to
do that on GTK, I had to give each control a pointer to the 'selparam'
structure describing its config-box pane, so that query function could
check it against the current one - and in order to do _that_, I had to
first arrange that those 'selparam' structures have stable addresses
from the moment they're first created, which meant adding a layer of
indirection so that the array of them in the top-level dlgparam
structure is now an array of _pointers_ rather than of actual structs.
(That way, realloc half way through config box creation can't
invalidate the important pointer values.)
Normally I never notice warnings in this build, because it runs inside
bob and dumps all the warnings in a part of the build log I never look
at. But I've had these fixes lying around for a while and should
commit them.
They're benign: all we need is an explicit declaration of strtoumax to
replace the one that stdlib.h doesn't provide, and a couple more of
those annoying NO_TYPECHECK modifiers on GET_WINDOWS_FUNCTION calls.
Having decided that the terminal's local echo setting shouldn't be
allowed to propagate through to termios, I think the local edit
setting shouldn't either. Also, no other terminal emulator I know
seems to implement this sequence, and if you enable it, things get
very confused in general. I think it's generally better off absent; if
somebody turns out to have been using it, then we'll at least be able
to find out what it's good for.
The functions that previously lived in it now live in terminal.c
itself; they've been renamed term_keyinput and term_keyinputw, and
their function is to add data to the terminal's user input buffer from
a char or wchar_t string respectively.
They sit more comfortably in terminal.c anyway, because their whole
point is to translate into the character encoding that the terminal is
currently configured to use. Also, making them part of the terminal
code means they can also take care of calling term_seen_key_event(),
which simplifies most of the call sites in the GTK and Windows front
ends.
Generation of text _inside_ terminal.c, from responses to query escape
sequences, is therefore not done by calling those external entry
points: we send those responses directly to the ldisc, so that they
don't count as keypresses for all the user-facing purposes like bell
overload handling and scrollback reset. To make _that_ convenient,
I've arranged that most of the code that previously lived in
lpage_send and luni_send is now in separate translation functions, so
those can still be called from situations where you're not going to do
the default thing with the translated data.
(However, pasted data _does_ still count as close enough to a keypress
to call term_seen_key_event - but it clears the 'interactive' flag
when the data is passed on to the line discipline, which tweaks a
minor detail of control-char handling in line ending mode but mostly
just means pastes aren't interrupted.)
It's identical in uxnoise and winnoise, being written entirely in
terms of existing cross-platform functions. Might as well centralise
it into sshrand.c.
Having explicitly _stated_ in commit 4dcc0fddf the principle that if
you ever queue a toplevel callback on a freeable object then you
should also call delete_callbacks_for_context on that object before
freeing it, I realised I'd never actually gone through and checked
methodically at every call site of queue_toplevel_callback. So I did,
and naturally, I found several missing ones.
The recent rewriting in both the GTK and Windows keyboard handlers
left the keypad 'Enter' key in a bad state, when no override is
enabled that causes it to generate an escape sequence.
On Windows, a series of fallbacks was causing it to generate \r
regardless of configuration, whereas in Telnet mode it should default
to generating the special Telnet new-line sequence, and in response to
ESC[20h (enabling term->cr_lf_return) it should generate \r\n.
On GTK, it wasn't generating anything _at all_, and also, I can't see
any evidence that the GTK keyboard handler had ever remembered to
implement the cr_lf_return mode.
Now Keypad Enter in non-escape-sequence mode should behave just like
Return, on both platforms.
TranslateKey() on Windows passed all numeric-keypad key events to this
function in terminal.c, and accepted whatever it gave back. That
included the handling for the trivial case of the numeric keypad, when
Num Lock is on and application keypad mode hasn't overridden it, so
that the keypad should be returning actual digits. In that case,
format_numeric_keypad_key() itself was returning the same ASCII
character I had passed in to it as a keypad identifier, and
TranslateKey was returning that in turn as the final translation.
Unfortunately, that means that with Num Lock on, the numeric keypad
translates into what _I_ used as the logical keypad codes inside the
source code, not what the local keyboard layout thinks are the right
codes. In particular, the key I identified as keypad '.' would render
as '.' even on a German keyboard where it ought to produce ','.
Fixed by removing the fallback case in format_numeric_keypad_key()
itself, so now it returns the empty string if it didn't produce an
escape sequence as its translation. Instead, the special case is in
window.c, which checks for a zero-length output string and handles it
by falling through to the keyboard-layout specific ToUnicode code
further down TranslateKey().
On the GTK side, no change is needed here: the GTK keyboard handler
does things in the opposite order, by trying the local input method
_first_ (unless it can see a reason up front to override it), and only
calling format_numeric_keypad_key() if that didn't provide a
translation. So the fallback ASCII translation in the latter was
already not used.
Re-consider the icon in light of the font size, so that we pick the icon
whose size mostly closely matches the terminal font, rather than always
scaling the default icon.
Remove the 'winhelp-topic' IDs from the Halibut source, and from the
code. Now we have one fewer name to think of every time we add a
setting.
I've left the HELPCTX system in place, with the vague notion that it
might be a useful layer of indirection for some future help system on a
platform like Mac OS X.
(I've left the putty.hlp target in doc/Makefile, if nothing else because
this is a convenient test case for Halibut's WinHelp support. But the
resulting help file will no longer support context help.)
GetDlgItemText_alloc is often used to get passwords from text fields,
so the memory should be freed and erased properly. Otherwise parts
of passwords might leak in memory.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
In my eagerness to make sure we didn't _accidentally_ change the
seat's trust status back to trusted at any point, I forgot to do it on
purpose if a second SSH login phase is legitimately run in the same
terminal after the first session has ended.
Fill in all the function pointers for 3rd party Windows GSS DLLs, not
just some of them. These were missed out when GSS key exchange was added
in d515e4f1a3.
At the point when we change over the seat's trust status to untrusted
for the last time, to finish authentication, Plink will now present a
final interactive prompt saying 'Press Return to begin session'. This
is a hint that anything after that that resembles an auth prompt
should be treated with suspicion, because _PuTTY_ thinks it's finished
authenticating.
This is of course an annoying inconvenience for interactive users, so
I've tried to reduce its impact as much as I can. It doesn't happen in
GUI PuTTY at all (because the trust sigil system is used instead); it
doesn't happen if you use plink -batch (because then the user already
knows that they _never_ expect an interactive prompt); and it doesn't
happen if Plink's standard input is being redirected from anywhere
other than the terminal / console (because then it would be pointless
for the server to try to scam passphrases out of the user anyway,
since the user isn't in a position to enter one in response to a spoof
prompt). So it should only happen to people who are using Plink in a
terminal for interactive login purposes, and that's not _really_ what
I ever intended Plink to be used for (which is why it's never had any
out-of-band control UI like OpenSSH's ~ system).
If anyone _still_ doesn't like this new prompt, it can also be turned
off using the new -no-antispoof flag, if the user is willing to
knowingly assume the risk.
In terminal-based GUI applications, this is passed through to
term_set_trust_status, to toggle whether lines are prefixed with the
new trust sigil. In console applications, the function returns false,
indicating to the backend that it should employ some other technique
for spoofing protection.
This is not yet used by anything, but the idea is that it'll be a
graphic in the terminal window that can't be replicated by a server
sending escape sequences, and hence can be used as a reliable
indication that the text on a particular terminal line is generated by
PuTTY itself and not passed through from the server. This will make it
possible to detect a malicious server trying to mimic local prompts to
trick you out of information that shouldn't be sent over the wire
(such as private-key passphrases).
The trust sigil I've picked is a small copy of the PuTTY icon, which
is thematically nice (it can be read as if the PuTTY icon is the name
of the speaker in a dialogue) and also convenient because we had that
graphic available already on all platforms. (Though the contortions I
had to go through to make the GTK 1 code draw it were quite annoying.)
The trust sigil has the same dimensions as a CJK double-width
character, i.e. it's 2 character cells wide by 1 high.
Now, instead of each seat's prompt-handling function doing the
control-char sanitisation of prompt text, the SSH code does it. This
means we can do it differently depending on the prompt.
In particular, prompts _we_ generate (e.g. a genuine request for your
private key's passphrase) are not sanitised; but prompts coming from
the server (in keyboard-interactive mode, or its more restricted SSH-1
analogues, TIS and CryptoCard) are not only sanitised but also
line-length limited and surrounded by uncounterfeitable headers, like
I've just done to the authentication banners.
This should mean that if a malicious server tries to fake the local
passphrase prompt (perhaps because it's somehow already got a copy of
your _encrypted_ private key), you can tell the difference.
The executables were already ignoring it.
This is a minimal change; PUTTY.HLP can still be built, and there's
still all the context IDs lying around.
Buildscr changes are untested.
With this change, we stop expecting to find putty.chm alongside the
executable file. That was a security hazard comparable to DLL
hijacking, because of the risk that a malicious CHM file could be
dropped into the same directory as putty.exe (e.g. if someone ran
PuTTY from their browser's download dir)..
Instead, the standalone putty.exe (and other binaries needing help)
embed the proper CHM file within themselves, as a Windows resource,
and if called on to display the help then they write the file out to a
temporary location. This has the advantage that if you download and
run the standalone putty.exe then you actually _get_ help, which
previously didn't happen!
The versions of the binaries in the installer don't each contain a
copy of the help file; that would be extravagant. Instead, the
installer itself writes a registry entry pointing at the proper help
file, and the executables will look there.
Another effect of this commit is that I've withdrawn support for the
older .HLP format completely. It's now entirely outdated, and
supporting it through this security fix would have been a huge pain.
Now instead of taking raw arguments to configure the output
StripCtrlChars with, it takes an enumerated value giving the context
of what's being sanitised, and allows the seat to decide what the
output parameters for that context should be.
The only context currently used is SIC_BANNER (SSH login banners).
I've also added a not-yet-used one for keyboard-interactive prompts.
Now if a pathname ends with a slash already, we detect that (using the
shiny new ptrlen_endswith), and don't bother putting another one in.
No functional change, but this should improve the occasional error
message, e.g. 'pscp remote:some.filename /' will now say it can't
create /some.filename instead of //some.filename.
Local functions in uxcons.c and wincons.c were calling the old
simplistic sanitise_term_data to print console-based prompts. Now they
use the same new system as everything else.
This removes the last use of the ASCII-centric sanitise_term_data.
If centralised code like the SSH implementation wants to sanitise
escape sequences out of a piece of server-provided text, it will need
to do it by making a locale-based StripCtrlChars if it's running in a
console context, or a Terminal-based one if it's in a GUI terminal-
window application.
All the other changes of behaviour needed between those two contexts
are handled by providing reconfigurable methods in the Seat vtable;
this one is no different. So now there's a new method in the Seat
vtable that will construct a StripCtrlChars appropriate to that kind
of seat. Terminal-window seats (gtkwin.c, window.c) implement it by
calling the new stripctrl_new_term(), and console ones use the locale-
based stripctrl_new().
If a proxy command jabbers on standard error in a way that doesn't
involve any newline characters, we now won't keep buffering data for
ever.
(Not that I've heard of it happening, but I noticed the theoretical
possibility on the way past in a recent cleanup pass.)
The idea of these is that they centralise the common idiom along the
lines of
if (logical_array_len >= physical_array_size) {
physical_array_size = logical_array_len * 5 / 4 + 256;
array = sresize(array, physical_array_size, ElementType);
}
which happens at a zillion call sites throughout this code base, with
different random choices of the geometric factor and additive
constant, sometimes forgetting them completely, and generally doing a
lot of repeated work.
The new macro sgrowarray(array,size,n) has the semantics: here are the
array pointer and its physical size for you to modify, now please
ensure that the nth element exists, so I can write into it. And
sgrowarrayn(array,size,n,m) is the same except that it ensures that
the array has size at least n+m (so sgrowarray is just the special
case where m=1).
Now that this is a single centralised implementation that will be used
everywhere, I've also gone to more effort in the implementation, with
careful overflow checks that would have been painful to put at all the
previous call sites.
This commit also switches over every use of sresize(), apart from a
few where I really didn't think it would gain anything. A consequence
of that is that a lot of array-size variables have to have their types
changed to size_t, because the macros require that (they address-take
the size to pass to the underlying function).
I haven't tried compiling with /DMINEFIELD in a while, and when I just
did, I found that the declarations in winstuff.h weren't actually
being included by memory.c where they're needed.
I've just noticed that the MSDN docs for WinSock gethostname()
guarantee that a size-256 buffer is large enough. That seems a lot
simpler than the previous faff.
I've fixed a handful of these where I found them in passing, but when
I went systematically looking, there were a lot more that I hadn't
found!
A particular highlight of this collection is the code that formats
Windows clipboard data in RTF, which was absolutely crying out for
strbuf_catf, and now it's got it.
Previously, we returned a valid settings_r containing a null HKEY.
That didn't actually cause trouble (I think all the registry API
functions must have spotted the null HKEY and returned a clean error
code instead of crashing), but it means the caller can't tell if the
session really existed or not. Now we return NULL in that situation,
and close_settings_r avoids crashing if we pass the NULL to it later.
My trawl of all the vtable systems in the code spotted a couple of
other function-like macros in passing, which might as well be
rewritten as inline functions too for the same reasons.
If Plink's standard output and/or standard error points at a Windows
console or a Unix tty device, and if Plink was not configured to
request a remote pty (and hence to send a terminal-type string), then
we apply the new control-character stripping facility.
The idea is to be a mild defence against malicious remote processes
sending confusing escape sequences through the standard error channel
when Plink is being used as a transport for something like git: it's
OK to have actual sensible error messages come back from the server,
but when you run a git command, you didn't really intend to give the
remote server the implicit licence to write _all over_ your local
terminal display. At the same time, in that scenario, the standard
_output_ of Plink is left completely alone, on the grounds that git
will be expecting it to be 8-bit clean. (And Plink can tell that
because it's redirected away from the console.)
For interactive login sessions using Plink, this behaviour is
disabled, on the grounds that once you've sent a terminal-type string
it's assumed that you were _expecting_ the server to use it to know
what escape sequences to send to you.
So it should be transparent for all the use cases I've so far thought
of. But in case it's not, there's a family of new command-line options
like -no-sanitise-stdout and -sanitise-stderr that you can use to
forcibly override the autodetection of whether to do it.
This all applies the same way to both Unix and Windows Plink.
Rather like isatty() on Unix, this tells you if a raw Windows HANDLE
points at a console or not. Useful to know if your standard output or
standard error is going to be shown to a user, or redirected to
something that will make automated use of it.
There's now a stdio_sink, whose write function calls fwrite on the
given FILE *; a bufchain_sink, whose write function appends to the
given bufchain; and on Windows there's a handle_sink whose write
function writes to the given 'struct handle'. (That is, not the raw
Windows HANDLE, but our event-loop-friendly wrapper on it.)
Not yet used for anything, but they're about to be.
Although I've reinstated the tedious manual mouse input, I can at
least reduce the amount of it that the user is required to provide:
the new PRNG has a hard limit on the size of its seed, so once we've
generated enough entropy to fill that up, there's no point in
collecting more, even if we're generating a particularly large key.
This reverts the policy change in 6142013ab (though not the detailed
code changes - I've kept the reorganised code layout). Now the old
mouse-based manual entropy collection is once again required when
generating a public key.
Rationale: I came across Wikipedia's page on CryptGenRandom which
mentioned that it was not a true kernel-level PRNG of the /dev/random
variety, but rather a thing running in userland, no different in
principle from PuTTY's own. So I think that makes it no longer a thing
we should rely on for all our entropy, and I'm relegating it back to
being just one entropy source among many.
Now that all the call sites are expecting a size_t instead of an int
length field, it's no longer particularly difficult to make it
actually return the pointer,length pair in the form of a ptrlen.
It would be nice to say that simplifies call sites because those
ptrlens can all be passed straight along to other ptrlen-consuming
functions. Actually almost none of the call sites are like that _yet_,
but this makes it possible to move them in that direction in future
(as part of my general aim to migrate ptrlen-wards as much as I can).
But also it's just nicer to keep the pointer and length together in
one variable, and not have to declare them both in advance with two
extra lines of boilerplate.
This is a general cleanup which has been overdue for some time: lots
of length fields are now the machine word type rather than the (in
practice) fixed 'int'.
Now we pass an error code in a separate dedicated parameter, instead
of overloading the length parameter so that a negative value means an
error code. This enables length to become unsigned without causing
trouble.
Those were a reasonable abbreviation when the code almost never had to
deal with little-endian numbers, but they've crept into enough places
now (e.g. the ECC formatting) that I think I'd now prefer that every
use of the integer read/write macros was clearly marked with its
endianness.
So all uses of GET_??BIT and PUT_??BIT are now qualified. The special
versions in x11fwd.c, which used variable endianness because so does
the X11 protocol, are suffixed _X11 to make that clear, and where that
pushed line lengths over 80 characters I've taken the opportunity to
name a local variable to remind me of what that extra parameter
actually does.
