UTF-16 when exchanging wchar_t strings with the front end. Enabled
by a #define in the platform's header file (one should not
promiscuously translate UTF-16 surrogate pairs on 32-bit wchar_t
platforms since that could give rise to redundant encoding attacks),
which is present on Windows.
[originally from svn r8495]
prompts packet containing no actual prompts (perhaps due to odd
server organisation, or perhaps so it can print a banner message and
do nothing else). Previously, the get_userpass_input functions
always returned failure when in '-batch' mode, even in this case
where no actual input would be required.
[originally from svn r8490]
to a Unix-domain socket. This typically works fine when PuTTY is run on the
same machine as the X server, but it's broken multi-hop X forwarding through
OpenSSH; when OpenSSH creates a proxy X server "localhost:10", it only listens
on TCP, not on a Unix-domain socket.
Instead, when deciding on the details of the display, we actively probe to see
if there's a Unix-domain socket we can use instead, and only use it if it's
there, falling back to the specified IP "localhost" if not.
Independently, when looking for local auth details in Xauthority for a
"localhost" TCP display, we prefer a matching Unix-domain entry, but will fall
back to an IP "localhost" entry (which would be unusual, but we don't trust a
Windows X server not to do it) -- this is a generalisation of the special case
added in r2538 (but removed in r8305, as the automatic upgrade masked the need
for it).
(This is now done in platform-independent code, so a side-effect is that
get_hostname() is now part of the networking abstraction on all platforms.)
[originally from svn r8462]
[r2538 == fda9983243]
[r8305 == ca6fc3a4da]
read at connection setup time, so don't offer it in the Change
Settings dialog box.
(In particular, this fixes an assertion failure when selecting
Change Settings on a non-SSH connection, since wincfg.c would have
added that control to Connection/SSH/X11 when the parent panel
Connection/SSH didn't exist. Making the control conditional on the
selected protocol would have been sufficient to fix that failure,
but I now realise that the setting should never have been presented
in mid-session in any case.)
[originally from svn r8443]
only call it when the _last_ mouse button comes back up. Otherwise,
xterm mouse tracking will lose a button-up event if you press down
two buttons, move the mouse outside the window, then release them
one at a time.
[originally from svn r8425]
OVERLAPPED structure in output threads, as we already do for input
threads. This apparently sorts out a hanging issue with serial ports
when trying to do simultaneous read and write, because (GJV says,
and it sounds plausible to me) in the absence of that event object
Windows signals the file handle itself to notify GetOverlappedResult
that it can return - and since the file handle might be being
signalled by a read operation instead, that leads to ambiguity.
Using an explicit event object in both directions means Windows
always knows which way the data is going.
Also a trivial fix in handle_output_new(), which was referencing the
wrong element of a union due to a copy and paste error. (Since the
result was address-taken and cast to void *, this wasn't a
functional error, but it was conceptually wrong.)
[originally from svn r8410]
case of double-width text (ESC # 3, ESC # 4, ESC # 6), because the
string passed to it was not truncated to the same width as the
clipping rectangle. (In fact, it _can't_ reliably be, in the case
where the window width is odd.) So instead we just assert that we
managed to _at least_ fill the clipping rectangle, not that we
exactly filled it.
The problem is easily reproduced by sending ESC # 8 (fill the screen
with Es) followed by ESC # 3. It doesn't typically happen, though,
if you _manually_ fill the screen with Es, because in that case
PuTTY's terminal buffer ends up being filled with CSET_ACP | 'E' or
similar, which means that general_textout() never gets called
because one of the other branches of do_text_internal() does the
work instead. ESC # 8 will fill the terminal buffer with genuine
_Unicode_ 'E' characters, which exercises the failing code path.
[originally from svn r8403]
sk_hostname_is_local(), to catch the case where we're doing something like X11
forwarding over SSH through a proxy, and we've thus disabled local lookup of
hostnames.
(I think this is what's behind the report in
<e9a86996-5dc2-4428-9b0c-c65693ca6351@m32g2000hsf.googlegroups.com>
in comp.security.ssh, although I'd like to know more of the circumstances.)
[originally from svn r8385]
void *, and hence eliminate a few casts. The Windows definition is
unchanged, but I daresay I've managed to stop it compiling nonetheless.
[originally from svn r8359]
subthread, so that it won't deadlock if fetching the content of the
clipboard turns out to depend on a network connection forwarded
through PuTTY.
[originally from svn r8338]
directly. Fixes a build failure involving name clashes between
winsock2.h and winsock.h, which had somehow managed to get included
in succession.
[originally from svn r8332]
While I'm here, a cosmetic PuTTYtel change: remove a reference to SSH from the
"logical host name" label in PuTTYtel only.
[originally from svn r8331]
[r8305 == ca6fc3a4da]
ourselves, but on Unix then assumed it was compatible with the system's
gss_buffer_desc, which wasn't the case on LP64 systems. Now, on Unix
we make Ssh_gss_buf into an alias for gss_buffer_desc, though we keep
something similar to the existing behaviour on Windows. This requires
renaming a couple of the fields in Ssh_gss_buf, and hence fixing all
the references.
Tested on Linux (MIT Kerberos) and Solaris. Compiled on NetBSD (Heimdal).
Not tested on Windows because neither mingw32 nor winegcc worked out of the
box for me. I think the Windows changes are all syntactic, though, so
if this compiles it should work no worse than before.
[originally from svn r8326]
if we have no better ideas, with UI shamelessly stolen from Quest PuTTY.
Off by default, which effectively reverts the change to using the local
username by default that came in with GSSAPI support in r8138. Anyone wanting
seamless single sign-on will need to set the new option. (The previous
default behaviour was getting in the way in ad-hoc scenarios.)
Note that the PSCP and Unix-Plink behaviour of using the local username by
default have remained unchanged throughout; they are not affected by the new
option. Not sure if that's the Right Thing.
[originally from svn r8324]
[r8138 == de5dd9d65c]
strings more rigorously, and then we look up the local X authority
data in .Xauthority _ourself_ rather than delegating to an external
xauth program. This is (negligibly) more efficient on Unix, assuming
I haven't got it wrong in some subtle way, but its major benefit is
that we can now support X authority lookups on Windows as well
provided the user points us at an appropriate X authority file in
the standard format. A new Windows-specific config option has been
added for this purpose.
[originally from svn r8305]
"curraddr", and turn "family" into a macro-derived property of the
other fields. The idea is that this renders SockAddrs immutable once
created, which should open up the possibility of duplicating and
reusing one without having to redo the actual DNS lookup.
I _hope_ I haven't broken anything. The new code architecture
contains several rather dubious-looking operations (namely the
arbitrary choice of the first returned address in functions like
sk_getaddr and sk_address_is_local - what if, for instance, a DNS
lookup returned a local and a non-local address?), but I think they
were functionally just as dubious beforehand and all this change has
done is to make them more obviously so to a reader.
[originally from svn r8293]
combination Ctrl + \ as the Ctrl-\ character. All of mine have, but
at least one laptop turns out not to. Do so explicitly.
[originally from svn r8182]
ago, I apparently caused all data received from local proxies to be
unconditionally tagged as TCP Urgent. Most network backends ignore
this, but it's critical to the Telnet backend, which will ignore all
Urgent-marked data in the assumption that there's a SYNCH on its way
that it should wait for. Nobody has noticed in two years, presumably
meaning that nobody has ever tried to do Telnet over a local proxy
in that time.
[originally from svn r8158]
to manually tweak the host name and port number under which the SSH
host key is read and written.
I've put it in the cross-platform Connection panel. Partly under the
flimsy pretext that other backends _can_ use it if they so wish (and
in fact it overrides the host name for title-bar purposes in all
network backends, though it has no other effect in anything but
SSH); but mostly because the SSH panel was too full already :-)
[originally from svn r8033]
addressing X displays. Update PuTTY's display-name-to-Unix-socket-
path translation code to cope with it, thus causing X forwarding to
start working again on Leopard.
[originally from svn r8020]
underlying WinSock SOCKET. Therefore, if we plan to modify the
SOCKET in a socket, we must remove it from the tree before doing so,
and put it back again afterwards. Otherwise it'll violate the tree's
sorting order, and sooner or later someone will try to find it and
get back NULL.
[originally from svn r7795]
port number in the GUI when the connection type is changed if the current
port number is the standard one for the current protocol.
It's not perfect, but it should make the common case of tabbing through the
Session panel easier when starting non-SSH connections on odd ports.
[originally from svn r7635]
Should be no significant change in behaviour.
(Well, entering usernames containing commas on Plink's command line will be
a little harder now.)
[originally from svn r7628]
Instead of passing -1 to its gotdata and sentdata callbacks on
error, winhandl.c will now pass the negation of the Windows error
number; and the Plink front end will now format that into an error
message and pass it on to the user.
[originally from svn r7416]
[r7415 == 702a92ceb8]
from is closed normally from the writing end. This is ludicrous; if
that situation isn't a natural EOF, _nothing_ is. So if we get that
particular error, we pretend it's EOF.
[originally from svn r7415]
simply specifying a hostname on the command line -- this would bring up the
config dialog. Use a slightly more sophisticated notion of whether the user
meant to launch a session.
[originally from svn r7321]
[r7265 == 5d76e00dac]
