This shows the build platform (32- vs 64-bit in particular, and also
whether Unix GTK builds were compiled with or without the X11 pieces),
what compiler was used to build the binary, and any interesting build
options that might have been set on the make command line (especially,
but not limited to, the security-damaging ones like NO_SECURITY or
UNPROTECT). This will probably be useful all over the place, but in
particular it should allow the different Windows binaries to be told
apart!
Commits 21101c739 and 2eb952ca3 laid the groundwork for this, by
allowing the various About boxes to contain free text and also
ensuring they could be copied and pasted easily as part of a bug
report.
I noticed today that Unix Plink responds to SIGWINCH by accidentally
dying of EINTR having interrupted its main select loop, and when I
checked, there turn out to be a couple of other select loops with the
same bug.
This should avoid the possibility of the SIGWINCH handler's blocking
when trying to write to the pipe. This could only happen if we'd
somehow received PIPE_BUF SIGWINCHes without reading the pipe, which
would be difficult to achieve.
While we're at it, also set O_NONBLOCK on the reading side of the pipe,
just in case.
TOOLTYPE_NONNETWORK (i.e. pterm) already has "-log" (as does Unix
PuTTY), so there's no sense suppressing the synonym "-sessionlog".
Undocumented lacunae that remain:
plink accepts -sessionlog, but does nothing with it. Arguably it should.
puttytel accepts -sshlog/-sshrawlog (and happily logs e.g. Telnet
negotiation, as does PuTTY proper).
This saves the need to fork and exec "cat", which should speed things
up. It also ensures that the network output goes to /dev/null, which
should avoid problems with blocking when writing to a full pipe.
A Plink invocation of the form 'plink -shareexists <session>' tests
for a currently live connection-sharing upstream for the session in
question. <session> can be any syntax you'd use with Plink to make the
actual connection (a host/port number, a bare saved session name,
-load, whatever).
I envisage this being useful for things like adaptive proxying - e.g.
if you want to connect to host A which you can't route to directly,
and you might already have a connection to either of hosts B or C
which are viable proxies, then you could write a proxy shell script
which checks whether you already have an upstream for B or C and goes
via whichever one is currently active.
Testing for the upstream's existence has to be done by actually
connecting to its socket, because on Unix the mere existence of a
Unix-domain socket file doesn't guarantee that there's a process
listening to it. So we make a test connection, and then immediately
disconnect; hence, that shows up in the upstream's event log.
In case a front end needs to store more than an integer id to be
returned to uxsel_input_remove, we now return a pointer to a
frontend-defined structure.
Having found a lot of unfixed constness issues in recent development,
I thought perhaps it was time to get proactive, so I compiled the
whole codebase with -Wwrite-strings. That turned up a huge load of
const problems, which I've fixed in this commit: the Unix build now
goes cleanly through with -Wwrite-strings, and the Windows build is as
close as I could get it (there are some lingering issues due to
occasional Windows API functions like AcquireCredentialsHandle not
having the right constness).
Notable fallout beyond the purely mechanical changing of types:
- the stuff saved by cmdline_save_param() is now explicitly
dupstr()ed, and freed in cmdline_run_saved.
- I couldn't make both string arguments to cmdline_process_param()
const, because it intentionally writes to one of them in the case
where it's the argument to -pw (in the vain hope of being at least
slightly friendly to 'ps'), so elsewhere I had to temporarily
dupstr() something for the sake of passing it to that function
- I had to invent a silly parallel version of const_cmp() so I could
pass const string literals in to lookup functions.
- stripslashes() in pscp.c and psftp.c has the annoying strchr nature
It tries to use the local username as the remote username if it has no
better ideas, but the presence of Default Settings would defeat this,
even if it had no username set. Reported by Jonathan Amery.
I don't think anyone has ever actually called it that, colloquially
_or_ formally, and if anyone ever did (in a bug report, say) I'd
probably have to stop and think to work out what they meant. It's
universally called Plink, and should be officially so as well :-)
I'm not actually sure why we've always had back ends notify ldisc of
changes to echo/edit settings by giving ldisc_send(ldisc,NULL,0,0) a
special meaning, instead of by having a separate dedicated notify
function with its own prototype and parameter set. Coverity's recent
observation that the two kinds of call don't even have the same
requirements on the ldisc (particularly, whether ldisc->term can be
NULL) makes me realise that it's really high time I separated the two
conceptually different operations into actually different functions.
While I'm here, I've renamed the confusing ldisc_update() function
which that special operation ends up feeding to, because it's not
actually a function applying to an ldisc - it applies to a front end.
So ldisc_send(ldisc,NULL,0,0) is now ldisc_echoedit_update(ldisc), and
that in turn figures out the current echo/edit settings before passing
them on to frontend_echoedit_update(). I think that should be clearer.
Both GUI PuTTY front ends have a piece of logic whereby a string is
interpreted as host:port if there's _one_ colon in it, but if there's
more than one colon then it's assumed to be an IPv6 literal with no
trailing port number. This permits the PuTTY command line to take
strings such as 'host', 'host:22' or '[::1]:22', but also cope with a
bare v6 literal such as '::1'.
This logic is also required in the two Plink front ends and in the
processing of CONF_loghost for host key indexing in ssh.c, but was
missing in all those places. Add it.
[originally from svn r10121]
I've gone through everywhere we handle host names / addresses (on
command lines, in PuTTY config, in port forwarding, in X display
names, in host key storage...) and tried to make them handle IPv6
literals sensibly, by using the host_str* functions I introduced in my
previous commit. Generally it's now OK to use a bracketed IPv6 literal
anywhere a hostname might have been valid; in a few cases where no
ambiguity exists (e.g. no :port suffix is permitted anyway)
unbracketed IPv6 literals are also acceptable.
[originally from svn r10120]
I've enabled gcc's format-string checking on dupprintf, by declaring
it in misc.h to have the appropriate GNU-specific attribute. This
pointed out a selection of warnings, which I've fixed.
[originally from svn r10084]
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
Unix GUI programs should not say 'Fatal Error' in the message box
title, and Plink should not destroy its logging context as a side
effect of printing a non-fatal error. Both appear to have been due to
inattentive cut and paste from the pre-existing fatal error functions.
[originally from svn r10044]
This change attempts to reinstate as a universal property something
which was sporadically true of the ad-hockery that came before
toplevel callbacks: that if there's a _very long_ queue of things to
be done through the callback mechanism, the doing of them will be
interleaved with re-checks of other event sources, which might (e.g.)
cause a flag to be set which makes the next callback decide not to do
anything after all.
[originally from svn r10040]
Again, I've removed the special-purpose ad-hockery from the assorted
front end message loops that dealt with deferred handling of socket
errors, and instead uxnet.c and winnet.c arrange that for themselves
by calling the new general top-level callback mechanism.
[originally from svn r10023]
This is a little like schedule_timer, in that the callback you provide
will be run from the top-level message loop of whatever application
you're in; but unlike the timer mechanism, it will happen
_immediately_.
The aim is to provide a general way to avoid re-entrance of code, in
cases where just _doing_ the thing you want done is liable to trigger
a confusing recursive call to the function in which you came to the
decision to do it; instead, you just request a top-level callback at
the message loop's earliest convenience, and do it then.
[originally from svn r10019]
that the user really ought to know but that are not actually fatal to
continued operation of PuTTY or a single network connection.
[originally from svn r9932]
Well, at least across all command-line tools on both Windows and Unix,
and the GTK apps on Unix too. The Windows GUI apps fundamentally can't
write to standard output and it doesn't seem sensible to use message
boxes for these purposes :-)
[originally from svn r9673]
First, make absolute times unsigned. This means that it's safe to
depend on their overflow behaviour (which is undefined for signed
integers). This requires a little extra care in handling comparisons,
but I think I've correctly adjusted them all.
Second, functions registered with schedule_timer() are guaranteed to be
called with precisely the time that was returned by schedule_timer().
Thus, it's only necessary to check these values for equality rather than
doing risky range checks, so do that.
The timing code still does lots that's undefined, unnecessary, or just
wrong, but this is a good start.
[originally from svn r9667]
Unconditionally override the configured terminal size with the one
from stdin if it's available. This avoids the silliness whereby if
Default Settings had a terminal size set, Plink used this and thus
caused the server to use the wrong size.
[originally from svn r9624]
The previous platform-dependent ifdefs, switching between a system
which tried to cope with spurious callbacks (which I'd observed on
Windows) and one which tried to cope with system clock jumps (which
can happen on Unix, if you use gettimeofday) have been completely
removed, and replaced with a much simpler approach which just copes
with system clock jumps by triggering any timers immediately.
None of the resulting effects should be catastrophic (the worst thing
might be the waste of CPU in a spurious rekey, but as long as the
system clock isn't jumping around _all_ the time that's hardly
critical) and in any case the Unix port has had a long-standing oddity
involving occasional lockups if pterm or PuTTY runs for too long,
which hopefully this should replace with a much less bad failure mode.
And the code is much simpler, which is not to be sneezed at.
[originally from svn r9528]
remembered to do before! Also some related fixes, such as that after
we do so we should immediately stop selecting on the socket in
question.
[originally from svn r9363]
of local sockets and pipes all open at once, and if one of them is
uncleanly closed from the remote end we don't want the whole
application to die - we want to close that socket's SSH channel and
continue with the rest of the run.
[originally from svn r9359]
allocated type.
The main reason for this is to stop it from taking up a fixed large
amount of space in every 'struct value' subunion in conf.c, although
that makes little difference so far because Filename is still doing
the same thing (and is therefore next on my list). However, the
removal of its arbitrary length limit is not to be sneezed at.
[originally from svn r9314]
data channels. Should comprehensively fix 'half-closed', in principle,
though it's a big and complicated change and so there's a good chance
I've made at least one mistake somewhere.
All connections should now be rigorous about propagating end-of-file
(or end-of-data-stream, or socket shutdown, or whatever) independently
in both directions, except in frontends with no mechanism for sending
explicit EOF (e.g. interactive terminal windows) or backends which are
basically always used for interactive sessions so it's unlikely that
an application would be depending on independent EOF (telnet, rlogin).
EOF should now never accidentally be sent while there's still buffered
data to go out before it. (May help fix 'portfwd-corrupt', and also I
noticed recently that the ssh main session channel can accidentally
have MSG_EOF sent before the output bufchain is clear, leading to
embarrassment when it subsequently does send the output).
[originally from svn r9279]
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
plink did not cope gracefully with this -- it was not possible to override that
hostname on the command line (attempts at doing so would be treated as part of
the remote command).
Fix this by applying the principle of r7265: if the user didn't explicitly
specify that they wanted to launch the hostname in the default (for instance
with '-load "Default Settings"', we assume they don't want to, and such a
hostname doesn't count when deciding whether to treat a non-option argument as
hostname or command.
[originally from svn r8651]
[r7265 == 5d76e00dac]
[r7266 == 856ed4ae73]
the backend's unthrottle function. If we don't, we'll deadlock. While
we're here, also pump as much data as possible out during each call to
try_output(), rather than restricting ourselves to a single call to
write().
[originally from svn r7755]
