This puts the previous commit's framework to practical use. Now the
main new_connection() passes its Seat ** through to the SshProxy setup
function, which (if the stars align) will actually use it: stash it,
return a TempSeat wrapper on it for the main backend to use in the
interim, and pass through the GUI dialog prompts for host key
confirmation and weak-crypto warnings.
This is unfinished at the UI end: those dialog prompts will now need
to be much clearer about which SSH server they're talking to (since
now there could be two involved), and I haven't made that change yet.
I haven't attempted to deal with get_userpass_input yet, though.
That's much harder, and I'm still working on it.
Now new_connection() takes an optional LogPolicy * argument, and
passes it on to the SshProxy setup. This means that SshProxy's
implementation of the LogPolicy trait can answer queries like
askappend() and logging_error() by passing them on to the same
LogPolicy used by the main backend.
Not all callers of new_connection have a LogPolicy, so we still have
to fall back to the previous conservative default behaviour if
SshProxy doesn't have a LogPolicy it can ask.
The main backend implementations didn't _quite_ have access to a
LogPolicy already, but they do have a LogContext, which has a
LogPolicy vtable pointer inside it; so I've added a query function
log_get_policy() which allows them to extract that pointer to pass to
new_connection.
This is the first step of fixing the non-interactivity limitations of
SshProxy. But it's also the easiest step: the next ones will be more
involved.
Now the non-SSH backends critically depend on it, it's important not
to forget to send it, for any socket type that's going to be used for
any of those backends. But ProxySocket, and the Unix and Windows
'socket' types wrapping pipes to local subprocesses, were not doing
so.
Some of these socket types don't have a SockAddr available to
represent the destination host. (Sometimes the concept isn't even
meaningful). Therefore, I've also expanded the semantics of
PLUGLOG_CONNECT_SUCCESS so that the addr parameter is allowed to be
NULL, and invented a noncommittal fallback version of the log message
in that situation.
In commit 0d3bb73608, I introduced the new SSH / jump-host proxy
type, which should be invoked by proxy.c when CONF_proxy_type is set
to PROXY_SSH. In fact, I left out the check, so it's invoked by
proxy.c _unconditionally_, after the check to see whether proxying is
required at all. So any saved session configured with any other proxy
type (other than PROXY_NONE) would be treated as PROXY_SSH by mistake.
How embarrassing. I did remember at one point that I needed to fix
this, but it fell out of my head before I pushed!
This introduces a new entry to the radio-button list of proxy types,
in which the 'Proxy host' box is taken to be the name of an SSH server
or saved session. We make an entire subsidiary SSH connection to that
host, open a direct-tcpip channel through it, and use that as the
connection over which to run the primary network connection.
The result is basically the same as if you used a local proxy
subprocess, with a command along the lines of 'plink -batch %proxyhost
-nc %host:%port'. But it's all done in-process, by having an SshProxy
object implement the Socket trait to talk to the main connection, and
implement Seat and LogPolicy to talk to its subsidiary SSH backend.
All the refactoring in recent years has got us to the point where we
can do that without both SSH instances fighting over some global
variable or unique piece of infrastructure.
From an end user perspective, doing SSH proxying in-process like this
is a little bit easier to set up: it doesn't require you to bake the
full pathname of Plink into your saved session (or to have it on the
system PATH), and the SshProxy setup function automatically turns off
SSH features that would be inappropriate in this context, such as
additional port forwardings, or acting as a connection-sharing
upstream. And it has minor advantages like getting the Event Log for
the subsidiary connection interleaved in the main Event Log, as if it
were stderr output from a proxy subcommand, without having to
deliberately configure the subsidiary Plink into verbose mode.
However, this is an initial implementation only, and it doesn't yet
support the _big_ payoff for doing this in-process, which (I hope)
will be the ability to handle interactive prompts from the subsidiary
SSH connection via the same user interface as the primary one. For
example, you might need to answer two password prompts in succession,
or (the first time you use a session configured this way) confirm the
host keys for both proxy and destination SSH servers. Comments in the
new source file discuss some design thoughts on filling in this gap.
For the moment, if the proxy SSH connection encounters any situation
where an interactive prompt is needed, it will make the safe
assumption, the same way 'plink -batch' would do. So it's at least no
_worse_ than the existing technique of putting the proxy connection in
a subprocess.
This is a sweeping change applied across the whole code base by a spot
of Emacs Lisp. Now, everywhere I declare a vtable filled with function
pointers (and the occasional const data member), all the members of
the vtable structure are initialised by name using the '.fieldname =
value' syntax introduced in C99.
We were already using this syntax for a handful of things in the new
key-generation progress report system, so it's not new to the code
base as a whole.
The advantage is that now, when a vtable only declares a subset of the
available fields, I can initialise the rest to NULL or zero just by
leaving them out. This is most dramatic in a couple of the outlying
vtables in things like psocks (which has a ConnectionLayerVtable
containing only one non-NULL method), but less dramatically, it means
that the new 'flags' field in BackendVtable can be completely left out
of every backend definition except for the SUPDUP one which defines it
to a nonzero value. Similarly, the test_for_upstream method only used
by SSH doesn't have to be mentioned in the rest of the backends;
network Plugs for listening sockets don't have to explicitly null out
'receive' and 'sent', and vice versa for 'accepting', and so on.
While I'm at it, I've normalised the declarations so they don't use
the unnecessarily verbose 'struct' keyword. Also a handful of them
weren't const; now they are.
Sometimes, within a switch statement, you want to declare local
variables specific to the handler for one particular case. Until now
I've mostly been writing this in the form
switch (discriminant) {
case SIMPLE:
do stuff;
break;
case COMPLICATED:
{
declare variables;
do stuff;
}
break;
}
which is ugly because the two pieces of essentially similar code
appear at different indent levels, and also inconvenient because you
have less horizontal space available to write the complicated case
handler in - particuarly undesirable because _complicated_ case
handlers are the ones most likely to need all the space they can get!
After encountering a rather nicer idiom in the LLVM source code, and
after a bit of hackery this morning figuring out how to persuade
Emacs's auto-indent to do what I wanted with it, I've decided to move
to an idiom in which the open brace comes right after the case
statement, and the code within it is indented the same as it would
have been without the brace. Then the whole case handler (including
the break) lives inside those braces, and you get something that looks
more like this:
switch (discriminant) {
case SIMPLE:
do stuff;
break;
case COMPLICATED: {
declare variables;
do stuff;
break;
}
}
This commit is a big-bang change that reformats all the complicated
case handlers I could find into the new layout. This is particularly
nice in the Pageant main function, in which almost _every_ case
handler had a bundle of variables and was long and complicated. (In
fact that's what motivated me to get round to this.) Some of the
innermost parts of the terminal escape-sequence handling are also
breathing a bit easier now the horizontal pressure on them is
relieved.
(Also, in a few cases, I was able to remove the extra braces
completely, because the only variable local to the case handler was a
loop variable which our new C99 policy allows me to move into the
initialiser clause of its for statement.)
Viewed with whitespace ignored, this is not too disruptive a change.
Downstream patches that conflict with it may need to be reapplied
using --ignore-whitespace or similar.
Apparently a handful of calls to that particular function managed to
miss my big-bang conversion to using bool where appropriate, and were
still being called with constants 0 and 1.
In the variable-length address slot, the main SOCKS5 reply packet can
contain a binary IP address (4- or 16-byte for v4/v6 respectively), or
a string intended to be interpreted as a domain name.
I was trying out the Python SOCKS5 proxy 'pproxy' today, which sends a
string-typed reply if you send it a string-typed domain name to
connect to. This caused me to notice that PuTTY mishandles the latter
case, by failing to account for the prefix length byte of that string
when computing the total size of the reply packet. So we would
misinterpret the final byte of its reply packet as the initial byte of
the actual connection, causing us to fail to recognise the SSH greeting.
The number of people has been steadily increasing who read our source
code with an editor that thinks tab stops are 4 spaces apart, as
opposed to the traditional tty-derived 8 that the PuTTY code expects.
So I've been wondering for ages about just fixing it, and switching to
a spaces-only policy throughout the code. And I recently found out
about 'git blame -w', which should make this change not too disruptive
for the purposes of source-control archaeology; so perhaps now is the
time.
While I'm at it, I've also taken the opportunity to remove all the
trailing spaces from source lines (on the basis that git dislikes
them, and is the only thing that seems to have a strong opinion one
way or the other).
Apologies to anyone downstream of this code who has complicated patch
sets to rebase past this change. I don't intend it to be needed again.
I've only just noticed that it doesn't do anything at all!
Almost every implementation of the Socket vtable provides a flush()
method which does nothing, optionally with a comment explaining why
it's OK to do nothing. The sole exception is the wrapper Proxy_Socket,
which implements the method during its setup phase by setting a
pending_flush flag, so that when its sub-socket is later created, it
can call sk_flush on that. But since the sub-socket's sk_flush will do
nothing, even that is completely pointless!
Source control history says that sk_flush was introduced by Dave
Hinton in 2001 (commit 7b0e08270), who was going to use it for some
purpose involving the SSL Telnet support he was working on at the
time. That SSL support was never finished, and its vestigial
declarations in network.h were removed in 2015 (commit 42334b65b). So
sk_flush is just another vestige of that abandoned work, which I
should have removed in the latter commit but overlooked.
The _nm strategy is slower, so I don't want to just change everything
over no matter what its contents. In this pass I've tried to catch
everything that holds the _really_ sensitive things like passwords,
private keys and session keys.
Now that all the call sites are expecting a size_t instead of an int
length field, it's no longer particularly difficult to make it
actually return the pointer,length pair in the form of a ptrlen.
It would be nice to say that simplifies call sites because those
ptrlens can all be passed straight along to other ptrlen-consuming
functions. Actually almost none of the call sites are like that _yet_,
but this makes it possible to move them in that direction in future
(as part of my general aim to migrate ptrlen-wards as much as I can).
But also it's just nicer to keep the pointer and length together in
one variable, and not have to declare them both in advance with two
extra lines of boilerplate.
This is a general cleanup which has been overdue for some time: lots
of length fields are now the machine word type rather than the (in
practice) fixed 'int'.
Now the integer output value is never negative (because the condition
that used to be signalled by setting it to -1 is now signalled by
returning false from the actual function), which frees me to make it
an unsigned type in an upcoming change.
uxnet.c's sk_namelookup and the sorting-key construction in
pangofont_enum_fonts() were both using s[n]printf and strncpy into
buffers that had no real need to be fixed-size; format_telnet_command
and the GTK Event Log selection-data builder were doing their own
sresize loops, but now we have strbuf they can just use that and save
redoing the same work.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
I think this is the full set of things that ought logically to be
boolean.
One annoyance is that quite a few radio-button controls in config.c
address Conf fields that are now bool rather than int, which means
that the shared handler function can't just access them all with
conf_{get,set}_int. Rather than back out the rigorous separation of
int and bool in conf.c itself, I've just added a similar alternative
handler function for the bool-typed ones.
This commit includes <stdbool.h> from defs.h and deletes my
traditional definitions of TRUE and FALSE, but other than that, it's a
100% mechanical search-and-replace transforming all uses of TRUE and
FALSE into the C99-standardised lowercase spellings.
No actual types are changed in this commit; that will come next. This
is just getting the noise out of the way, so that subsequent commits
can have a higher proportion of signal.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
Ian Jackson points out that the Linux kernel has a macro of this name
with the same purpose, and suggests that it's a good idea to use the
same name as they do, so that at least some people reading one code
base might recognise it from the other.
I never really thought very hard about what order FROMFIELD's
parameters should go in, and therefore I'm pleasantly surprised to
find that my order agrees with the kernel's, so I don't have to
permute every call site as part of making this change :-)
I don't actually know why this was ever here; it appeared in the very
first commit that invented Plug in the first place (7b0e08270) without
explanation. Perhaps Dave's original idea was that sometimes you'd
need those macros _not_ to be defined so that the same names could be
reused as the methods for a particular Plug instance? But I don't
think that ever actually happened, and the code base builds just fine
with those macros defined unconditionally just like all the other sets
of method macros we now have, so let's get rid of this piece of cruft
that was apparently unnecessary all along.
I think that means that _every_ one of my traitoids is now a struct
containing a vtable pointer as one of its fields (albeit sometimes the
only field), and never just a bare pointer.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
This is another major source of unexplained 'void *' parameters
throughout the code.
In particular, the currently unused testback.c actually gave the wrong
pointer type to its internal store of the frontend handle - it cast
the input void * to a Terminal *, from which it got implicitly cast
back again when calling from_backend, and nobody noticed. Now it uses
the right type internally as well as externally.
Now I've got FROMFIELD, I can rework it so that structures providing
an implementation of the Socket or Plug trait no longer have to have
the vtable pointer as the very first thing in the structure. In
particular, this means that the ProxySocket structure can now directly
implement _both_ the Socket and Plug traits, which is always
_logically_ how it's worked, but previously it had to be implemented
via two separate structs linked to each other.
This is a cleanup I started to notice a need for during the BinarySink
work. It removes a lot of faffing about casting things to char * or
unsigned char * so that some API will accept them, even though lots of
such APIs really take a plain 'block of raw binary data' argument and
don't care what C thinks the signedness of that data might be - they
may well reinterpret it back and forth internally.
So I've tried to arrange for all the function call APIs that ought to
have a void * (or const void *) to have one, and those that need to do
pointer arithmetic on the parameter internally can cast it back at the
top of the function. That saves endless ad-hoc casts at the call
sites.
GCC 6 warns about potentially misleading indentation, such as:
if (condition) stmt1; stmt2;
Chaining multiple ifs on a single line runs into this warning, even if
it's probably not actually misleading to a human eye, so just add a
couple of newlines to pacify the compiler.
I've defined a new value for the 'int type' parameter passed to
plug_log(), which proxy sockets will use to pass their backend
information on how the setup of their proxied connections are going.
I've implemented support for the new type code in all _nontrivial_
plug log functions (which, conveniently, are precisely the ones I just
refactored into backend_socket_log); the ones which just throw all
their log data away anyway will do that to the new code as well.
We use the new type code to log the DNS lookup and connection setup
for connecting to a networked proxy, and also to log the exact command
string sent down Telnet proxy connections (so the user can easily
debug mistakes in the configured format string) and the exact command
executed when spawning a local proxy process. (The latter was already
supported on Windows by a bodgy logging call taking advantage of
Windows in particular having no front end pointer; I've converted that
into a sensible use of the new plug_log facility, and done the same
thing on Unix.)
We've always had the back-end code unconditionally print 'Looking up
host' before calling name_lookup. But name_lookup doesn't always do an
actual lookup - in cases where the connection will be proxied and
we're configured to let the proxy do the DNS for us, it just calls
sk_nonamelookup to return a dummy SockAddr with the unresolved name
still in it. It's better to print a message that varies depending on
whether we're _really_ doing DNS or not, e.g. so that people can tell
the difference between DNS failure and proxy misconfiguration.
Hence, those log messages are now generated inside name_lookup(),
which takes a couple of extra parameters for the purpose - a frontend
pointer to pass to logevent(), and a reason string so that it can say
what the hostname it's (optionally) looking up is going to be used
for. (The latter is intended for possible use in logging subsidiary
lookups for port forwarding, though the moment I haven't changed
the current setup where those connection setups aren't logged in
detail - we just pass NULL in that situation.)
When anyone connects to a PuTTY tool's listening socket - whether it's
a user of a local->remote port forwarding, a connection-sharing
downstream or a client of Pageant - we'd like to log as much
information as we can find out about where the connection came from.
To that end, I've implemented a function sk_peer_info() in the socket
abstraction, which returns a freeform text string as best it can (or
NULL, if it can't get anything at all) describing the thing at the
other end of the connection. For TCP connections, this is done using
getpeername() to get an IP address and port in the obvious way; for
Unix-domain sockets, we attempt SO_PEERCRED (conditionalised on some
moderately hairy autoconfery) to get the pid and owner of the peer. I
haven't implemented anything for Windows named pipes, but I will if I
hear of anything useful.
Having found a lot of unfixed constness issues in recent development,
I thought perhaps it was time to get proactive, so I compiled the
whole codebase with -Wwrite-strings. That turned up a huge load of
const problems, which I've fixed in this commit: the Unix build now
goes cleanly through with -Wwrite-strings, and the Windows build is as
close as I could get it (there are some lingering issues due to
occasional Windows API functions like AcquireCredentialsHandle not
having the right constness).
Notable fallout beyond the purely mechanical changing of types:
- the stuff saved by cmdline_save_param() is now explicitly
dupstr()ed, and freed in cmdline_run_saved.
- I couldn't make both string arguments to cmdline_process_param()
const, because it intentionally writes to one of them in the case
where it's the argument to -pw (in the vain hope of being at least
slightly friendly to 'ps'), so elsewhere I had to temporarily
dupstr() something for the sake of passing it to that function
- I had to invent a silly parallel version of const_cmp() so I could
pass const string literals in to lookup functions.
- stripslashes() in pscp.c and psftp.c has the annoying strchr nature
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
It was only actually used in X11 and port forwarding, to find internal
state structures given only the Socket that ssh.c held. So now that
that lookup has been reworked to be the sensible way round,
private_ptr is no longer used for anything and can be removed.
[originally from svn r10075]
The mechanism for constructing a new connection-type Socket when a
listening one receives an incoming connection previously worked by
passing a platform-specific 'OSSocket' type to the plug_accepting
function, which would then call sk_register to wrap it with a proper
Socket instance. This is less flexible than ideal, because it presumes
that only one kind of OS object might ever need to be turned into a
Socket. So I've replaced OSSocket throughout the code base with a pair
of parameters consisting of a function pointer and a context such that
passing the latter to the former returns the appropriate Socket; this
will permit different classes of listening Socket to pass different
function pointers.
In deference to the reality that OSSockets tend to be small integers
or pointer-sized OS handles, I've made the context parameter an
int/pointer union that can hold either of those directly, rather than
the usual approach of making it a plain 'void *' and requiring a
context structure to be dynamically allocated every time.
[originally from svn r10068]
should not call plug functions, because it's being called from within
new_connection(), and the state on which the plug functions depend
will not have been set up until new_connection() returns success.
Instead, we set the error string in the Proxy_Socket, which will cause
the same error message to be returned as a failure of new_connection().
[originally from svn r9689]
localhost connections, and also enable X forwarding in such a way that
it will attempt to connect to a Unix-domain X server socket, an
assertion will fail when proxy_for_destination() tries to call
sk_getaddr(). Fix by ensuring that Unix-domain sockets are _never_
proxied, since they fundamentally can't be.
[originally from svn r9688]
data channels. Should comprehensively fix 'half-closed', in principle,
though it's a big and complicated change and so there's a good chance
I've made at least one mistake somewhere.
All connections should now be rigorous about propagating end-of-file
(or end-of-data-stream, or socket shutdown, or whatever) independently
in both directions, except in frontends with no mechanism for sending
explicit EOF (e.g. interactive terminal windows) or backends which are
basically always used for interactive sessions so it's unlikely that
an application would be depending on independent EOF (telnet, rlogin).
EOF should now never accidentally be sent while there's still buffered
data to go out before it. (May help fix 'portfwd-corrupt', and also I
noticed recently that the ssh main session channel can accidentally
have MSG_EOF sent before the output bufchain is clear, leading to
embarrassment when it subsequently does send the output).
[originally from svn r9279]
