Now that the SSH backend's user_input bufchain is no longer needed for
handling userpass input, it doesn't have to be awkwardly shared
between all the packet protocol layers any more. So we can turn the
want_user_input and got_user_input methods of PacketProtocolLayer into
methods of ConnectionLayer, and then only the two connection layers
have to bother implementing them, or store a pointer to the bufchain
they read from.
I've introduced a function ldisc_notify_sendok(), which backends
should call on their ldisc (if they have one) when anything changes
that might cause backend_sendok() to start returning true.
At the moment, the function does nothing. But in future, I'm going to
make ldisc start buffering typed-ahead input data not yet sent to the
backend, and then the effect of this function will be to trigger
flushing all that data into the backend.
Backends only have to call this function if sendok was previously
false: backends requiring no network connection stage (like pty and
serial) can safely return true from sendok, and in that case, they
don't also have to immediately call this function.
This is working towards allowing the subsidiary SSH connection in an
SshProxy to share the main user-facing Seat, so as to be able to pass
through interactive prompts.
This is more difficult than the similar change with LogPolicy, because
Seats are stateful. In particular, the trust-sigil status will need to
be controlled by the SshProxy until it's ready to pass over control to
the main SSH (or whatever) connection.
To make this work, I've introduced a thing called a TempSeat, which is
(yet) another Seat implementation. When a backend hands its Seat to
new_connection(), it does it in a way that allows new_connection() to
borrow it completely, and replace it in the main backend structure
with a TempSeat, which acts as a temporary placeholder. If the main
backend tries to do things like changing trust status or sending
output, the TempSeat will buffer them; later on, when the connection
is established, TempSeat will replay the changes into the real Seat.
So, in each backend, I've made the following changes:
- pass &foo->seat to new_connection, which may overwrite it with a
TempSeat.
- if it has done so (which we can tell via the is_tempseat() query
function), then we have to free the TempSeat and reinstate our main
Seat. The signal that we can do so is the PLUGLOG_CONNECT_SUCCESS
notification, which indicates that SshProxy has finished all its
connection setup work.
- we also have to remember to free the TempSeat if our backend is
disposed of without that having happened (e.g. because the
connection _doesn't_ succeed).
- in backends which have no local auth phase to worry about, ensure
we don't call seat_set_trust_status on the main Seat _before_ it
gets potentially replaced with a TempSeat. Moved some calls of
seat_set_trust_status to just after new_connection(), so that now
the initial trust status setup will go into the TempSeat (if
appropriate) and be buffered until that seat is relinquished.
In all other uses of new_connection, where we don't have a Seat
available at all, we just pass NULL.
This is NFC, because neither new_connection() nor any of its delegates
will _actually_ do this replacement yet. We're just setting up the
framework to enable it to do so in the next commit.
Now new_connection() takes an optional LogPolicy * argument, and
passes it on to the SshProxy setup. This means that SshProxy's
implementation of the LogPolicy trait can answer queries like
askappend() and logging_error() by passing them on to the same
LogPolicy used by the main backend.
Not all callers of new_connection have a LogPolicy, so we still have
to fall back to the previous conservative default behaviour if
SshProxy doesn't have a LogPolicy it can ask.
The main backend implementations didn't _quite_ have access to a
LogPolicy already, but they do have a LogContext, which has a
LogPolicy vtable pointer inside it; so I've added a query function
log_get_policy() which allows them to extract that pointer to pass to
new_connection.
This is the first step of fixing the non-interactivity limitations of
SshProxy. But it's also the easiest step: the next ones will be more
involved.
This is called by the backend to notify the Seat that the connection
has progressed to the point where the main session channel (i.e. the
thing that would typically correspond to the client's stdin/stdout)
has been successfully set up.
The only Seat that implements this method nontrivially is the one in
SshProxy, which uses it as an indication that the proxied connection
to the remote host has succeeded, and sends the
PLUGLOG_CONNECT_SUCCESS notification to its own Plug.
Hence, the only backends that need to implement it at the moment are
the two SSH-shaped backends (SSH proper and bare-connection / psusan).
For other backends, it's not always obvious what 'main session
channel' would even mean, or whether it means anything very useful; so
I've also introduced a backend flag indicating whether the backend is
expecting to call that method at all, so as not to have to spend
pointless effort on defining an arbitrary meaning for it in other
contexts.
So a lot of this patch is just introducing the new method and putting
its trivial do-nothing implementation into all the existing Seat
methods. The interesting parts happen in ssh/mainchan.c (which
actually calls it), and sshproxy.c (which does something useful in
response).
On a similar theme of separating the query operation from the
attempted change, backend_send() now no longer has the side effect of
returning the current size of the send buffer. Instead, you have to
call backend_sendbuffer() every time you want to know that.
This is used to notify the Seat that some data has been cleared from
the backend's outgoing data buffer. In other words, it notifies the
Seat that it might be worth calling backend_sendbuffer() again.
We've never needed this before, because until now, Seats have always
been the 'main program' part of the application, meaning they were
also in control of the event loop. So they've been able to call
backend_sendbuffer() proactively, every time they go round the event
loop, instead of having to wait for a callback.
But now, the SSH proxy is the first example of a Seat without
privileged access to the event loop, so it has no way to find out that
the backend's sendbuffer has got smaller. And without that, it can't
pass that notification on to plug_sent, to unblock in turn whatever
the proxied connection might have been waiting to send.
In fact, before this commit, sshproxy.c never called plug_sent at all.
As a result, large data uploads over an SSH jump host would hang
forever as soon as the outgoing buffer filled up for the first time:
the main backend (to which sshproxy.c was acting as a Socket) would
carefully stop filling up the buffer, and then never receive the call
to plug_sent that would cause it to start again.
The new callback is ignored everywhere except in sshproxy.c. It might
be a good idea to remove backend_sendbuffer() entirely and convert all
previous uses of it into non-empty implementations of this callback,
so that we've only got one system; but for the moment, I haven't done
that.
Suggested by Manfred Kaiser, who also wrote most of this patch
(although outlying parts, like documentation and SSH-1 support, are by
me).
This is a second line of defence against the kind of spoofing attacks
in which a malicious or compromised SSH server rushes the client
through the userauth phase of SSH without actually requiring any auth
inputs (passwords or signatures or whatever), and then at the start of
the connection phase it presents something like a spoof prompt,
intended to be taken for part of userauth by the user but in fact with
some more sinister purpose.
Our existing line of defence against this is the trust sigil system,
and as far as I know, that's still working. This option allows a bit of
extra defence in depth: if you don't expect your SSH server to
trivially accept authentication in the first place, then enabling this
option will cause PuTTY to disconnect if it unexpectedly does so,
without the user having to spot the presence or absence of a fiddly
little sigil anywhere.
Several types of authentication count as 'trivial'. The obvious one is
the SSH-2 "none" method, which clients always try first so that the
failure message will tell them what else they can try, and which a
server can instead accept in order to authenticate you unconditionally.
But there are two other ways to do it that we know of: one is to run
keyboard-interactive authentication and send an empty INFO_REQUEST
packet containing no actual prompts for the user, and another even
weirder one is to send USERAUTH_SUCCESS in response to the user's
preliminary *offer* of a public key (instead of sending the usual PK_OK
to request an actual signature from the key).
This new option detects all of those, by clearing the 'is_trivial_auth'
flag only when we send some kind of substantive authentication response
(be it a password, a k-i prompt response, a signature, or a GSSAPI
token). So even if there's a further path through the userauth maze we
haven't spotted, that somehow avoids sending anything substantive, this
strategy should still pick it up.
This notifies the Seat that the entire backend session has finished
and closed its network connection - or rather, that it _might_ have
done, and that the frontend should check backend_connected() if it
wasn't planning to do so already.
The existing Seat implementations haven't needed this: the GUI ones
don't actually need to do anything specific when the network
connection goes away, and the CLI ones deal with it by being in charge
of their own event loop so that they can easily check
backend_connected() at every possible opportunity in any case. But I'm
about to introduce a new Seat implementation that does need to know
this, and doesn't have any other way to get notified of it.
This flag is set in backends which can be used programmatically to
proxy a network connection in place of running a shell session. That
is true of both SSH proper, and the psusan ssh-connection protocol.
Nothing yet uses this flag, but something is about to.
This clears up another large pile of clutter at the top level, and in
the process, allows me to rename source files to things that don't all
have that annoying 'ssh' prefix at the top.
