This involved a trivial merge conflict fix in terminal.c because of
the way the cherry-pick 73b41feba5 differed from its original
bdbd5f429c.
But a more significant rework was needed in windows/console.c, because
the updates to confirm_weak_* conflicted with the changes on main to
abstract out the ConsoleIO system.
This centralises the messages for weak crypto algorithms (general, and
host keys in particular, the latter including a list of all the other
available host key types) into ssh/common.c, in much the same way as
we previously did for ordinary host key warnings.
The reason is the same too: I'm about to want to vary the text in one
of those dialog boxes, so it's convenient to start by putting it
somewhere that I can modify just once.
This continues the programme of UTF-8 support in authentication, begun
in commit f4519b6533 which arranged for console userpass prompts
to function in UTF-8 when the prompts_t asked them to. Since the new
line editing setup works properly when it _is_ in UTF-8 mode, I can
now also arrange that it puts the terminal into UTF-8 mode in the
right circumstances.
I've extended the applicability of the '-legacy-charset-handling' flag
introduced by the commit mentioned above, so that now it's not
specific to the console front end. Now you can give it to GUI PuTTY as
well, which restores the previous (wrong) behaviour of accepting
username and password prompt input in the main session's configured
character set. So if this change breaks someone's workflow, they
should be able to have it back.
This allows you to set a flag in conio_setup() which causes the
returned ConsoleIO object to interpret all its output as UTF-8, by
translating it to UTF-16 and using WriteConsoleW to write it in
Unicode. Similarly, input is read using ReadConsoleW and decoded from
UTF-16 to UTF-8.
This flag is set to false in most places, to avoid making sudden
breaking changes. But when we're about to present a prompts_t to the
user, it's set from the new 'utf8' flag in that prompt, which in turn
is set by the userauth layer in any case where the prompts are going
to the server.
The idea is that this should be the start of a fix for the long-
standing character-set handling bug that strings transmitted during
SSH userauth (usernames, passwords, k-i prompts and responses) are all
supposed to be in UTF-8, but we've always encoded them in whatever our
input system happens to be using, and not done any tidying up on them.
We get occasional complaints about this from users whose passwords
contain characters that are encoded differently between UTF-8 and
their local encoding, but I've never got round to fixing it because
it's a large piece of engineering.
Indeed, this isn't nearly the end of it. The next step is to add UTF-8
support to all the _other_ ways of presenting a prompts_t, as best we
can.
Like the previous change to console handling, it seems very likely
that this will break someone's workflow. So there's a fallback
command-line option '-legacy-charset-handling' to revert to PuTTY's
previous behaviour.
Until now, the command-line PuTTY tools (PSCP, PSFTP and Plink) have
presented all the kinds of interactive prompt (password/passphrase,
host key, the assorted weak-crypto warnings, 'append to log file?') on
standard error, and read the responses from standard input.
This is unfortunate because if you're redirecting their standard
input (especially likely with Plink) then the prompt responses will
consume some of the intended session data. It would be better to
present the prompts _on the console_, even if that's not where stdin
or stderr point.
On Unix, we've been doing this for ages, by opening /dev/tty directly.
On Windows, we didn't, because I didn't know how. But I've recently
found out: you can open the magic file names CONIN$ and CONOUT$, which
will point at your actual console, if one is available.
So now, if it's possible, the command-line tools will do that. But if
the attempt to open CONIN$ and CONOUT$ fails, they'll fall back to the
old behaviour (in particular, if no console is available at all).
In order to make this happen consistently across all the prompt types,
I've introduced a new object called ConsoleIO, which holds whatever
file handles are necessary, knows whether to close them
afterwards (yes if they were obtained by opening CONFOO$, no if
they're the standard I/O handles), and presents a BinarySink API to
write to them and a custom API to read a line of text.
This seems likely to break _someone's_ workflow. So I've added an
option '-legacy-stdio-prompts' to restore the old behaviour.
This is like the seat-independent nonfatal(), but specifies a Seat,
which allows the GUI dialog box to have the right terminal window as
its parent (if there are multiple ones).
Changed over all the nonfatal() calls in the code base that could be
localised to a Seat, which means all the ones that come up if
something goes horribly wrong in host key storage. To make that
possible, I've added a 'seat' parameter to store_host_key(); it turns
out that all its call sites had one available already.
Somehow I missed that Coverity reported that complaint about a
(theoretically) uninitialised pointer twice, against the two
platforms' console.c files. Now fixed the same way in the other one.
The text of the host key warnings was replicated in three places: the
Windows rc file, the GTK dialog setup function, and the console.c
shared between both platforms' CLI tools. Now it lives in just one
place, namely ssh/common.c where the rest of the centralised host-key
checking is done, so it'll be easier to adjust the wording in future.
This comes with some extra automation. Paragraph wrapping is no longer
done by hand in any version of these prompts. (Previously we let GTK
do the wrapping on GTK, but on Windows the resource file contained a
bunch of pre-wrapped LTEXT lines, and console.c had pre-wrapped
terminal messages.) And the dialog heights in Windows are determined
automatically based on the amount of stuff in the window.
The main idea of all this is that it'll be easier to set up more
elaborate kinds of host key prompt that deal with certificates (if,
e.g., a server sends us a certified host key which we don't trust the
CA for). But there are side benefits of this refactoring too: each
tool now reliably inserts its own appname in the prompts, and also, on
Windows the entire prompt text is copy-pastable.
Details of implementation: there's a new type SeatDialogText which
holds a set of (type, string) pairs describing the contents of a
prompt. Type codes distinguish ordinary text paragraphs, paragraphs to
be displayed prominently (like key fingerprints), the extra-bold scary
title at the top of the 'host key changed' version of the dialog, and
the various information that lives in the subsidiary 'more info' box.
ssh/common.c constructs this, and passes it to the Seat to present the
actual prompt.
In order to deal with the different UI for answering the prompt, I've
added an extra Seat method 'prompt_descriptions' which returns some
snippets of text to interpolate into the messages. ssh/common.c calls
that while it's still constructing the text, and incorporates the
resulting snippets into the SeatDialogText.
For the moment, this refactoring only affects the host key prompts.
The warnings about outmoded crypto are still done the old-fashioned
way; they probably ought to be similarly refactored to use this new
SeatDialogText system, but it's not immediately critical for the
purpose I have right now.
Correcting a source file name in the docs just now reminded me that
I've seen a lot of outdated source file names elsewhere in the code,
due to all the reorganisation since we moved to cmake. Here's a giant
pass of trying to make them all accurate again.
All the seat functions that request an interactive prompt of some kind
to the user - both the main seat_get_userpass_input and the various
confirmation dialogs for things like host keys - were using a simple
int return value, with the general semantics of 0 = "fail", 1 =
"proceed" (and in the case of seat_get_userpass_input, answers to the
prompts were provided), and -1 = "request in progress, wait for a
callback".
In this commit I change all those functions' return types to a new
struct called SeatPromptResult, whose primary field is an enum
replacing those simple integer values.
The main purpose is that the enum has not three but _four_ values: the
"fail" result has been split into 'user abort' and 'software abort'.
The distinction is that a user abort occurs as a result of an
interactive UI action, such as the user clicking 'cancel' in a dialog
box or hitting ^D or ^C at a terminal password prompt - and therefore,
there's no need to display an error message telling the user that the
interactive operation has failed, because the user already knows,
because they _did_ it. 'Software abort' is from any other cause, where
PuTTY is the first to know there was a problem, and has to tell the
user.
We already had this 'user abort' vs 'software abort' distinction in
other parts of the code - the SSH backend has separate termination
functions which protocol layers can call. But we assumed that any
failure from an interactive prompt request fell into the 'user abort'
category, which is not true. A couple of examples: if you configure a
host key fingerprint in your saved session via the SSH > Host keys
pane, and the server presents a host key that doesn't match it, then
verify_ssh_host_key would report that the user had aborted the
connection, and feel no need to tell the user what had gone wrong!
Similarly, if a password provided on the command line was not
accepted, then (after I fixed the semantics of that in the previous
commit) the same wrong handling would occur.
So now, those Seat prompt functions too can communicate whether the
user or the software originated a connection abort. And in the latter
case, we also provide an error message to present to the user. Result:
in those two example cases (and others), error messages should no
longer go missing.
Implementation note: to avoid the hassle of having the error message
in a SeatPromptResult being a dynamically allocated string (and hence,
every recipient of one must always check whether it's non-NULL and
free it on every exit path, plus being careful about copying the
struct around), I've instead arranged that the structure contains a
function pointer and a couple of parameters, so that the string form
of the message can be constructed on demand. That way, the only users
who need to free it are the ones who actually _asked_ for it in the
first place, which is a much smaller set.
(This is one of the rare occasions that I regret not having C++'s
extra features available in this code base - a unique_ptr or
shared_ptr to a string would have been just the thing here, and the
compiler would have done all the hard work for me of remembering where
to insert the frees!)
(TL;DR: to suppress redundant 'Press Return to begin session' prompts
in between hops of a jump-host configuration, in Plink.)
This new query method directly asks the Seat the question: is the same
stream of input used to provide responses to interactive login
prompts, and the session input provided after login concludes?
It's used to suppress the last-ditch anti-spoofing defence in Plink of
interactively asking 'Access granted. Press Return to begin session',
on the basis that any such spoofing attack works by confusing the user
about what's a legit login prompt before the session begins and what's
sent by the server after the main session begins - so if those two
things take input from different places, the user can't be confused.
This doesn't change the existing behaviour of Plink, which was already
suppressing the antispoof prompt in cases where its standard input was
redirected from something other than a terminal. But previously it was
doing it within the can_set_trust_status() seat query, and I've now
moved it out into a separate query function.
The reason why these need to be separate is for SshProxy, which needs
to give an unusual combination of answers when run inside Plink. For
can_set_trust_status(), it needs to return whatever the parent Seat
returns, so that all the login prompts for a string of proxy
connections in session will be antispoofed the same way. But you only
want that final 'Access granted' prompt to happen _once_, after all
the proxy connection setup phases are done, because up until then
you're still in the safe hands of PuTTY itself presenting an unbroken
sequence of legit login prompts (even if they come from a succession
of different servers). Hence, SshProxy unconditionally returns 'no' to
the query of whether it has a single mixed input stream, because
indeed, it never does - for purposes of session input it behaves like
an always-redirected Plink, no matter what kind of real Seat it ends
up sending its pre-session login prompts to.
Previously, checking the host key against the persistent cache managed
by the storage.h API was done as part of the seat_verify_ssh_host_key
method, i.e. separately by each Seat.
Now that check is done by verify_ssh_host_key(), which is a new
function in ssh/common.c that centralises all the parts of host key
checking that don't need an interactive prompt. It subsumes the
previous verify_ssh_manual_host_key() that checked against the Conf,
and it does the check against the storage API that each Seat was
previously doing separately. If it can't confirm or definitively
reject the host key by itself, _then_ it calls out to the Seat, once
an interactive prompt is definitely needed.
The main point of doing this is so that when SshProxy forwards a Seat
call from the proxy SSH connection to the primary Seat, it won't print
an announcement of which connection is involved unless it's actually
going to do something interactive. (Not that we're printing those
announcements _yet_ anyway, but this is a piece of groundwork that
works towards doing so.)
But while I'm at it, I've also taken the opportunity to clean things
up a bit by renaming functions sensibly. Previously we had three very
similarly named functions verify_ssh_manual_host_key(), SeatVtable's
'verify_ssh_host_key' method, and verify_host_key() in storage.h. Now
the Seat method is called 'confirm' rather than 'verify' (since its
job is now always to print an interactive prompt, so it looks more
like the other confirm_foo methods), and the storage.h function is
called check_stored_host_key(), which goes better with store_host_key
and avoids having too many functions with similar names. And the
'manual' function is subsumed into the new centralised code, so
there's now just *one* host key function with 'verify' in the name.
Several functions are reindented in this commit. Best viewed with
whitespace changes ignored.
Now that it's possible for a single invocation of PuTTY to connect to
multiple SSH servers (jump host followed by ultimate destination
host), it's rather unhelpful for host key prompts to just say "the
server". To check an unknown host key, users will need to know _which_
host it's purporting to be the key for.
Another possibility is to put a message in the terminal window
indicating which server we're currently in the SSH setup phase for.
That will certainly be what we have to end up doing for userpass
prompts that appear _in_ the terminal window. But that by itself is
still unhelpful for host key prompts in a separate dialog, because the
user would have to check both windows to get all the information they
need. Easier if the host key dialog itself tells you everything you
need to know to answer the question: is _this_ key the one you expect
for _that_ host?
The format _strings_ were previously centralised into the platform-
independent console.c, as const char arrays. Now the actual formatting
operation is centralised as well, by means of console.c providing a
function that takes all the necessary parameters and returns a
formatted piece of text for the console.
Mostly this is so that I can add extra parameters to the message with
some confidence: changing a format string in one file and two fprintf
statements in other files to match seems like the kind of situation
you wish you hadn't got into in the first place :-)
This complicates the API in one sense (more separate functions), but
in another sense, simplifies it (each function does something
simpler). When I start putting one Seat in front of another during SSH
proxying, the latter will be more important - in particular, it means
you can find out _whether_ a seat can support changing trust status
without having to actually attempt a destructive modification.
This gets rid of all those annoying 'win', 'ux' and 'gtk' prefixes
which made filenames annoying to type and to tab-complete. Also, as
with my other recent renaming sprees, I've taken the opportunity to
expand and clarify some of the names so that they're not such cryptic
abbreviations.
