The fix in commit 31ab5b8e30 was incomplete. It works when you
maximise the window by pressing the maximise button in the title bar,
but not when you drag the window to the very top of the screen. In the
latter case, the resize at the instant of maximisation works right,
but then we get a WM_EXITSIZEMOVE when the drag is released,
triggering one final resize which ignored the window border again.
That was because wm_size_resize_term() was being given a flag on
purpose telling it to ignore the border: apparently at some point in
the past, ignoring the border for even a normally maximised
window (not even full-screen) was done on purpose. But for the reasons
in the previous commit, I'm changing that.
During startup, calculate the top/left position of the window so that
the whole window is visible. Without this change, sometimes the window
is clipped vertically and you can't see the bottom.
Thanks to Bruno Kraychete da Costa for the original version of this
patch; I've tweaked it slightly, but the basic strategy of adjusting
the output of GetWindowRect against the monitor's working area is all
his.
On most keyboard modes the escape-sequence for Alt-Fn is the same as
for Fn alone but with an additional ESC prepended.
However, this additional ESC should not be sent for keyboard modes
that sends a different escape-sequence when Alt is pressed, like e.g.
Xterm216+, as this is not expected by the server-side application.
Signed-off-by: Anders Larsen <al@alarsen.net>
This parameter was undocumented, and Windows-specific: its semantics
date from before PuTTY was cross-platform, and are "Pass this flags
parameter straight through to the Win32 API's conversion functions".
So in Windows platform code you can pass flags like MB_USEGLYPHCHARS,
but in cross-platform code, you dare not pass anything nonzero at all
because the Unix frontend won't recognise it (or, likely, even
compile).
I've kept the flag for now in the underlying mb_to_wc / wc_to_mb
functions. Partly that's because there's one place in the Windows code
where the parameter _is_ used; mostly, it's because I'm about to
replace those functions anyway, so there's no point in editing all the
call sites twice.
The code in the 'if (IsZoomed)' statement in reset_window() was
failing to take account of the user-configured gap between the text
and the window edge, so that the requested border was lost. Now it
does take that into account.
In this commit, this change of behaviour applies to both a normally
maximised window (with the window frame still visible round the edge)
and to a full-screen window (nothing visible on the whole monitor
except PuTTY).
I'm not 100% sure whether that's the right behaviour: perhaps the
purpose of this configurable border is to space the text away from the
window furniture, so that there's no need for it if there isn't any
furniture? But on the other hand, one thing _I_ use this border for is
to make space round the edge of a terminal window for the green border
Zoom superimposes when sharing the window. And that's a use case that
would still make sense when the window is full-screened.
These actions were already available in the Ctrl + right-click context
menu (or just right-click, if you shifted the mouse-button actions
into Windows mode). But a user might not know about Ctrl + right-click,
and only know to look in the system menu. So it makes them easier to
find if they're in that menu too. Also, I don't really see any reason
why the two menus _should_ be different.
CONF_bold_style is a pair of bit flags rather than an enum, so its
values aren't just BOLD_STYLE_FONT and BOLD_STYLE_COLOUR but also the
bitwise OR of them. (Hopefully not neither.)
The Windows version of the Filename structure now contains three
versions of the pathname, in UTF-16, UTF-8 and the system code page.
Callers can use whichever is most convenient.
All uses of filenames for actually opening files now use the UTF-16
version, which means they can tolerate 'exotic' filenames, by which I
mean those including Unicode characters outside the host system's
CP_ACP default code page.
Other uses of Filename structures inside the 'windows' subdirectory do
something appropriate, e.g. when printing a filename inside a message
box or a console message, we use the UTF-8 version of the filename
with the UTF-8 version of the appropriate API.
There are three remaining pieces to full Unicode filename support:
One is that the cross-platform code has many calls to
filename_to_str(), embodying the assumption that a file name can be
reliably converted into the unspecified current character set; those
will all need changing in some way.
Another is that write_setting_filename(), in windows/storage.c, still
saves filenames to the Registry as an ordinary REG_SZ in the system
code page. So even if an exotic filename were stored in a Conf, that
Conf couldn't round-trip via the Registry and back without corrupting
that filename by coercing it back to a string that fits in CP_ACP and
therefore doesn't represent the same file. This can't be fixed without
a compatibility break in the storage format, and I don't want to make
a minimal change in that area: if we're going to break compatibility,
then we should break it good and hard (the Nanny Ogg principle), and
devise a completely fresh storage representation that fixes as many
other legacy problems as possible at the same time. So that's my plan,
not yet started.
The final point, much more obviously, is that we're still short of
methods to _construct_ any Filename structures using a Unicode input
string! It should now work to enter one in the GUI configurer (either
by manual text input or via the file selector), but it won't
round-trip through a save and load (as discussed above), and there's
still no way to specify one on the command line (the groundwork is
laid by commit 10e1ac7752 but not yet linked up).
But this is a start.
In commit f9e572595b I claimed that I'd removed very nearly all
the global and static variables from windows/window.c. It turns out
that this was wildly overoptimistic - I missed quite a few of them!
I'm not quite sure how I managed that; my best guess is that I used an
underpowered 'nm' command that failed to find some classes of
variable.
Some of the remaining function-scope statics were removed completely
by commit afb3dab1e9 just now. In this commit, I've swept up some
more and turn them into fields of WinGuiSeat, where they should have
been moved last September.
The (hopefully complete this time) list of remaining variables,
generated by running this rune in the Windows build directory:
nm windows/CMakeFiles/putty.dir/window.c.obj |
grep -E '^([^ ]+)? *[bBcCdDgGsS] [^\.]'
consists of the following variables which are legitimately global
across the whole process and not related to a particular window:
- 'hinst' and 'hprev', instance handles for Windows loadable modules
- 'classname' in the terminal_window_class_a() and
terminal_window_class_w() functions, which allocate a window class
reusably
- some pointers to Windows API functions retrieved via the
DECL_WINDOWS_FUNCTION / GET_WINDOWS_FUNCTION system, such as
p_AdjustWindowRectExForDpi and p_FlashWindowEx
- some pointers to Windows API functions set up by assigning them at
startup to the right one of the ANSI or Unicode version depending on
the Windows version, e.g. sw_DefWindowProc and sw_DispatchMessage
- 'unicode_window', a boolean flag set at the same time as those
sw_Foo function pointers
- 'sesslist', storing the last-retrieved version of the saved
sessions menu
- 'cursor_visible' in show_mouseptr() and 'forced_visible' in
update_mouse_pointer(), each of which tracks the cumulative number
of times that function has shown or hidden the mouse pointer, so as
to manage its effect on the global state updated by ShowCursor
- 'trust_icon', loaded from the executable's resources
- 'wgslisthead', the list of all active WinGuiSeats
- 'wm_mousewheel', the window-message id we use for mouse wheel
events
and the following which are nothing to do with our code:
- '_OptionsStorage' in __local_stdio_printf_options() and
__local_stdio_scanf_options(), which I'd never noticed before, but
apparently are internal to a standard library header.
lpDx_maybe was a pointer defined to point at either lpDx itself or
NULL, depending on whether the code decided it needed to pass the lpDx
array of per-character pixel offsets to various functions during
drawing (based in turn on whether the font was variable-pitch).
lpDx is reallocated as necessary, which means lpDx_maybe must be kept
up to date. This was achieved by resetting it to lpDx if it was
already non-NULL.
But lpDx starts out as NULL before the first reallocation, so that
this can't work - it'll be initialised to NULL even if we _did_ want
to use it, and then at the first realloc, it won't be updated!
Before the previous commit turned lpDx from a static into an automatic
variable, this would have been a rare bug affecting only the first
call to the function. Now it will happen all the time, which is
better, because we can notice and fix it.
Replaced lpDx_maybe completely with a boolean flag indicating whether
we should pass lpDx to drawing functions.
In windows/window.c, a few variables inside functions were declared as
static, with no particular purpose that I can see: they don't seem to
have any reason to persist between calls to the function. So it makes
more sense to have them be ordinary stack-allocated automatic
variables.
Static variables removed by this commit:
- 'RECT ss' in reset_window.
- 'WORD keys[3]' and 'BYTE keysb[3]' in TranslateKey.
- several (buffer, length) pairs in do_text_internal.
- keys_unicode[] in TranslateKey.
All of these variables were originally introduced in patches credited
to Robert de Bath, which means I can't even try to reconstruct my
original thought processes, because they weren't _my_ thoughts anyway.
The arrays in do_text_internal are the easiest to understand: they're
reallocated larger as necessary, and making them static means the
allocation from a previous call can be reused, saving a malloc (though
I don't think that's a good enough reason to bother, these days).
The fixed-size static arrays and RECT are harder to explain. I suspect
they might originally have been that way because of 1990s attitudes to
performance: in x86-32 it's probably marginally faster to give your
variables constant addresses than sp-relative ones, and in the 1990s
computers were much slower, so there's an argument for making things
static if you have no _need_ to make them automatic. These days, the
difference is negligible, and persistent state is much more widely
recognised as a risk!
But keys_unicode[] is by far the strangest, because there was code
that clearly _did_ expect it to persist between calls, namely three
assignments to keys_unicode[0] near the end of the function after it's
finished being used for any other purpose, and a conditioned-out set
of debug() calls at the top of the function that print its contents
before anything has yet written to it.
But as far as I can see, the persistent data in the array is otherwise
completely unused. In any call to the function, if keys_unicode is
used at all, then it's either written directly by a call to ToAsciiEx,
or else (for pre-NT platforms) converted from ToAsciiEx's output via
MultiByteToWideChar. In both cases, the integer variable 'r' indicates
how many array elements were written, and subsequent accesses only
ever read those elements. So the assignments to keys_unicode[0] at the
end of the previous call will be overwritten before anything at all
can depend on them - with the exception of those debug statements.
I don't really understand what was going on here. It's tempting to
guess that those final assignments must have once done something
useful, and the code that used them was later removed. But the source
control history doesn't bear that out: a static array of three
elements (under its original name 'keys') was introduced in commit
0d5d39064a, and then commits 953b7775b3 and 26f1085038
added the other two assignments. And as far as I can see, even as of
the original commit 0d5d39064a, the code already had the property
that there was a final assignment to keys[0] which would inevitably be
overwritten in the next call before it could affect anything.
So I'm totally confused about what those assignments were _ever_
useful for. But an email thread from the time suggests that some of
those patches were being rebased repeatedly past other work (or
rather, the much less reliable CVS analogue of rebasing), so my best
guess is that that's where the confusion crept in - perhaps in RDB's
original version of the code they did do something useful.
Regardless of that, I'm pretty convinced that persistent array can't
be doing anything useful _now_. So I'm taking it out. But if anyone
reports a bug resulting from this change, then I'll eat my words - and
with any luck the details of the bug report will give us a clue what's
going on, and then we can put back some equivalent functionality with
much better comments!
In commit d07d7d66f6 I rewrote the code that constructs RTF paste
data so that it uses a strbuf, in place of the previous ad-hoc code
that counted up the lengths of pieces of RTF in advance in order to
realloc the buffer.
But apparently I left in an entire loop whose job was to count up one
of those lengths, failing to notice that it's now completely pointless
because its output value is never needed!
Happily a clang upgrade has just improved the 'variable set but not
used' warning to the point where it can spot that. I expect previously
the variable still counted as 'used' because each increment of it used
the previous value.
I thought I'd found all of these before, but perhaps a few managed to
slip in since I last looked. The character argument to the <ctype.h>
functions must have the value of an unsigned char or EOF; passing an
ordinary char (unless you know char is unsigned on every platform the
code will ever go near) risks mistaking '\xFF' for EOF, and causing
outright undefined behaviour on byte values in the range 80-FE. Never
do it.
Horizontal scroll events aren't generated by the traditional mouse
wheel, but they can be generated by trackpad gestures, though this
isn't always configured on.
The cross-platform and Windows parts of this patch is due to
Christopher Plewright; I added the GTK support.
From https://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h3-Any-event-tracking:
Any-event mode is the same as button-event mode, except that all motion
events are reported, even if no mouse button is down. It is enabled by
specifying 1003 to DECSET.
Normally the front ends only report mouse events when buttons are
pressed, so we introduce a MA_MOVE event with MBT_NOTHING set to
indicate such a mouse movement.
A server attempt to resize the window (for instance via DECCOLM) when
"When window is resized" was set to "Forbid resizing completely" would
cause all terminal output to be suspended, due to the resize attempt
never being acknowledged.
(There are other code paths like this, which I've fixed for
completeness, but I don't think they have any effect: the terminal
filters out resize attempts to the current size before this point, and
even if a server can get such a request through the SUPDUP protocol, the
test for that is wrong and will never fire -- this needs fixing
separately.)
Of the three calls to queue_toplevel_callback in window.c, one of them
was still passing NULL as its context parameter, rather than the new
'wgs'. As a result, a segfault could occur during some session closures.
In cases where we refuse a resize request, either because it's too
large or because the window is not currently resizable due to being
maximised, we were failing to communicate that back to the Terminal so
that it could stop waiting for the resize and resume processing input.
Those have been there since around 2001. They're in a piece of code
that calls get_fullscreen_rect to find the overall screen size, and
then prevents attempts to resize the window larger than that. The
static variables were arranging that we don't have to call
get_fullscreen_rect more than once.
But, firstly, computers are faster 20 years on; secondly, remote
window-resize requests are intentionally rate-limited (as of commit
d74308e90e), so this shouldn't be the limiting factor anyway; and
thirdly, multi-monitor support has appeared since then, which means
that if the window has been dragged from one monitor to another then
get_fullscreen_rect might _legitimately_ return a different bounding
rectangle when called a second time.
So we should just do the full check every time unconditionally.
(cherry picked from commit 4b3a8cbf61)
This is a piece of refactoring that's been overdue forever. In the
Unix front end, all the variables specific to a particular SSH session
live in a big 'inst' structure, and calls to any of the trait APIs
like Seat or TermWin can recover the right 'inst' from their input
context pointer. But the Windows frontend was written before that kind
of thing became habitual to me, and all its variables have been just
lying around at the top level of window.c, and most of those context
pointers were just ignored.
Now I've swept them all up and put them where they ought to be, in a
big context structure. This was made immeasurably easier by the very
nifty 'clang-rename' tool, which can rename a single variable in a C
source file, and find just the right set of identifiers to change even
if other variables in the file have the same name, even in sub-scopes.
So I started by clang-renaming all the top-level variables in question
to have names beginning with a prefix that didn't previously appear
anywhere in the code; checked that still worked; and then moved all
the declarations into the struct type and did a purely textual
search-and-replace of the prefix with 'wgs->'.
One potential benefit of this change is that it allows more than one
instance of the WinGuiSeat structure to exist in the same process. I
don't have any immediate plans to actually do that, but it's nice to
know it wouldn't be ruled out if we ever did need it.
But that's not the main reason I did it. The main reason is that I
recently looked at the output of a Windows build using clang -Wall,
and was horrified by the number of casual shadowings of
generically-named global variables like 'term' and 'conf' with local
variables of the same name. That seemed like a recipe for confusion,
and I decided the best way to disambiguate them all was to do this
refactoring that I'd wanted anyway for years.
A few uses of the global variables occurred in functions that didn't
have convenient access to the right WinGuiSeat via a callback
parameter of some kind. Those had to be treated specially. Most were
cleaned up in advance by the previous few commits; the remaining fixes
in this commit itself were in functions like modalfatalbox(),
nonfatal() and cleanup_exit(). The error reporting functions want the
terminal HWND to use as a MessageBox parameter; they also have the
side effect of un-hiding the mouse pointer in the terminal window, in
case it's hidden; and cleanup_exit wanted to free some resources
dangling off the WinGuiSeat.
For most of those cases, I've made a linked list of all currently live
WinGuiSeat structures, so that they can loop over _all_ live instances
(whether there's one as usual, none, or maybe more than one in
future). The parent window for non-connection-specific error messages
is found by simply picking one arbitrarily off the linked list (if
any); the cleanups are done by iterating over the _whole_ list.
The mouse-pointer unhiding is dealt with by simply allowing
show_mouseptr to take a _null_ WinGuiSeat pointer. The only thing it
needs the context for at all is to check whether pointer-hiding is
enabled in the session's Conf; so if we're _un_-hiding the pointer we
don't need to check, and can unhide it unconditionally.
The remaining global variables in window.c are the new linked list of
all WinGuiSeat structures; 'wm_mousewheel' and 'trust_icon' which
really should be global across all WinGuiSeats even if we were to have
more than one; and there's a static variable 'cursor_visible' in
show_mouseptr() which is likewise legitimately Seat-independent (since
it records the last value we passed to the Win32 API ShowCursor
function, and _that's_ global across the whole process state).
All of this should cause no functional change whatsoever.
Those have been there since around 2001. They're in a piece of code
that calls get_fullscreen_rect to find the overall screen size, and
then prevents attempts to resize the window larger than that. The
static variables were arranging that we don't have to call
get_fullscreen_rect more than once.
But, firstly, computers are faster 20 years on; secondly, remote
window-resize requests are intentionally rate-limited (as of commit
d74308e90e), so this shouldn't be the limiting factor anyway; and
thirdly, multi-monitor support has appeared since then, which means
that if the window has been dragged from one monitor to another then
get_fullscreen_rect might _legitimately_ return a different bounding
rectangle when called a second time.
So we should just do the full check every time unconditionally.
This is like the seat-independent nonfatal(), but specifies a Seat,
which allows the GUI dialog box to have the right terminal window as
its parent (if there are multiple ones).
Changed over all the nonfatal() calls in the code base that could be
localised to a Seat, which means all the ones that come up if
something goes horribly wrong in host key storage. To make that
possible, I've added a 'seat' parameter to store_host_key(); it turns
out that all its call sites had one available already.
Previously, the timing.c subsystem worked in Windows PuTTY by means of
scheduling WM_TIMER messages to be sent to the terminal window. Now it
uses a separate hidden window instead, and all the machinery for
handling that window lives on its own in windows/utils/gui-timing.c.
Most immediately, this removes a use of wgs.term_hwnd that will become
awkward when I move that structure in a following commit. But also, it
will make it easier to add the same timing subsystem to unrelated GUI
programs, such as Windows Pageant: if we ever decide to implement
automatic deletion or re-encryption of unused keys after a timeout,
this will help make that easier.
That clipboard-writing function is called just once, from the Event
Log dialog procedure, for when the user deliberately copies to the
clipboard. That call always passes must_deselect = true, which means
the conditional WM_IGNORE_CLIP messages are not sent. So it's simpler
to remove that parameter completely, and the conditional calls which
are never used.
Also, the clipboard data copied from the Event Log dialog is being put
in the clipboard associated with the main PuTTY terminal window. But
anything else we copy from a dialog box using Windows's built-in
copy-paste mechanisms would surely be associated with the _dialog_,
not its parent window. So we should do the same thing here. Therefore,
I've added a HWND parameter to write_aclip() and used that in place of
wgs.term_hwnd, so that we can pass in the HWND of the dialog itself.
The conditionalisation of that call on 'protocol == PROT_SSH' has been
around since the beginning of our git history. But in those days,
random_save_seed() was unconditional _internally_ - it would always
create and write to the seed file regardless of whether the random
pool had even been initialised, let alone used.
Now random_save_seed() has its own internal condition which prevents
it doing anything if the random subsystem was never started up in the
first place. So it's better to call it unconditionally from
cleanup_exit, and then it'll be able to do its thing whenever needed,
without having to second-guess based on the top-level protocol.
(In fact, that's what all the other implementations of cleanup_exit()
have done all along. On Unix, and in Windows console apps, we do call
random_save_seed() unconditionally, and expect it to uncomplainingly
do nothing if there's nothing to do.)
My experimental build with clang-cl at -Wall did show up a few things
that are safe enough to fix right now. One was this list of missing
includes, which was causing a lot of -Wmissing-prototype warnings, and
is a real risk because it means the declarations in headers weren't
being type-checked against the actual function definitions.
Happily, no actual mismatches.
This patch fixes a few other whitespace and formatting issues which
were pointed out by the bulk-reindent or which I spotted in passing,
some involving manual editing to break lines more nicely.
I think the weirdest hunk in here is the one in windows/window.c
TranslateKey() where _half_ of an assignment statement inside an 'if'
was on the same line as the trailing paren of the if condition. No
idea at all how that one managed to happen!
I think a lot of these were inserted by a prior run through GNU indent
many years ago. I noticed in a more recent experiment that that tool
doesn't always correctly distinguish which instances of 'id * id' are
pointer variable declarations and which are multiplications, so it
spaces some of the former as if they were the latter.
My aim has always been to have those back-dented by 2 spaces (half an
indent level) compared to the statements around them, so that in
particular switch statements have distinct alignment for the
statement, the cases and the interior code without consuming two whole
indent levels.
This patch sweeps up all the violations of that principle found by my
bulk-reindentation exercise.
My bulk indentation check also turned up a lot of cases where a run-on
function call or if statement didn't have its later lines aligned
correctly relative to the open paren.
I think this is quite easy to do by getting things out of
sync (editing the first line of the function call and forgetting to
update the rest, perhaps even because you never _saw_ the rest during
a search-replace). But a few didn't quite fit into that pattern, in
particular an outright misleading case in unix/askpass.c where the
second line of a call was aligned neatly below the _wrong_ one of the
open parens on the opening line.
Restored as many alignments as I could easily find.
In several pieces of development recently I've run across the
occasional code block in the middle of a function which suddenly
switched to 2-space indent from this code base's usual 4. I decided I
was tired of it, so I ran the whole code base through a re-indenter,
which made a huge mess, and then manually sifted out the changes that
actually made sense from that pass.
Indeed, this caught quite a few large sections with 2-space indent
level, a couple with 8, and a handful of even weirder things like 3
spaces or 12. This commit fixes them all.
In the 'xterm 216+' function key mode, a function key pressed with a
combination of Shift, Ctrl and Alt has its usual sequence like
ESC[n~ (for some integer n) turned into ESC[n;m~ where m-1 is a 3-bit
bitmap of currently pressed modifier keys.
This mode now also applies to the keys on the small keypad above the
arrow keys (Ins, Home, PgUp etc). If xterm 216+ mode is selected,
those keys are modified in the same way as the function keys.
As with the function keys, this doesn't guarantee that PuTTY will
_receive_ any particular shifted key of this kind, and not repurpose
it. Just as Alt+F4 still closes the window (at least on Windows)
rather than sending a modified F4 sequence, Shift+Ins will still
perform a paste action rather than sending a modified Ins sequence,
Shift-PgUp will still scroll the scrollback, etc. But the keys not
already used by PuTTY for other purposes should now have their
modern-xterm behaviour in modern-xterm mode.
Thanks to H.Merijn Brand for developing and testing a version of this
patch.
The text of the host key warnings was replicated in three places: the
Windows rc file, the GTK dialog setup function, and the console.c
shared between both platforms' CLI tools. Now it lives in just one
place, namely ssh/common.c where the rest of the centralised host-key
checking is done, so it'll be easier to adjust the wording in future.
This comes with some extra automation. Paragraph wrapping is no longer
done by hand in any version of these prompts. (Previously we let GTK
do the wrapping on GTK, but on Windows the resource file contained a
bunch of pre-wrapped LTEXT lines, and console.c had pre-wrapped
terminal messages.) And the dialog heights in Windows are determined
automatically based on the amount of stuff in the window.
The main idea of all this is that it'll be easier to set up more
elaborate kinds of host key prompt that deal with certificates (if,
e.g., a server sends us a certified host key which we don't trust the
CA for). But there are side benefits of this refactoring too: each
tool now reliably inserts its own appname in the prompts, and also, on
Windows the entire prompt text is copy-pastable.
Details of implementation: there's a new type SeatDialogText which
holds a set of (type, string) pairs describing the contents of a
prompt. Type codes distinguish ordinary text paragraphs, paragraphs to
be displayed prominently (like key fingerprints), the extra-bold scary
title at the top of the 'host key changed' version of the dialog, and
the various information that lives in the subsidiary 'more info' box.
ssh/common.c constructs this, and passes it to the Seat to present the
actual prompt.
In order to deal with the different UI for answering the prompt, I've
added an extra Seat method 'prompt_descriptions' which returns some
snippets of text to interpolate into the messages. ssh/common.c calls
that while it's still constructing the text, and incorporates the
resulting snippets into the SeatDialogText.
For the moment, this refactoring only affects the host key prompts.
The warnings about outmoded crypto are still done the old-fashioned
way; they probably ought to be similarly refactored to use this new
SeatDialogText system, but it's not immediately critical for the
purpose I have right now.
Instead of maintaining a single sparse table mapping Unicode to the
currently selected code page, we now maintain a collection of such
tables mapping Unicode to any code page we've so far found a need to
work with, and we add code pages to that list as necessary, and never
throw them away (since there are a limited number of them).
This means that the wc_to_mb family of functions are effectively
stateless: they no longer depend on a 'struct unicode_data'
corresponding to the current terminal settings. So I've removed that
parameter from all of them.
This fills in the missing piece of yesterday's commit a216d86106:
now wc_to_mb too should be able to handle internally-implemented
character sets, by hastily making their reverse mapping table if it
doesn't already have it.
(That was only a _latent_ bug, because the only use of wc_to_mb in the
cross-platform or Windows code _did_ want to convert to the currently
selected code page, so the old strategy worked in that case. But there
was no protection against an unworkable use of it being added later.)
Fixes a cosmetic issue where the new ConPTY error added in 4ae8b742ab
had an ugly "Unable to open connection to".
(Arguably this ought to test a backend property rather than
cmdline_tooltype.)
This makes pterm.exe support the same (very small) subset of the
standard option collection that Unix pterm does. Namely, -load (which
won't do anything useful with a hostname to connect to, but is still
useful if you have a saved session containing configuration like
colours or default size or what have you), and also -sessionlog.
To make this work, I've had to move the 'tooltype' definition out of
window.c into {putty,pterm}.c, so that it can be defined differently
in the two.
This matches the way it's done in the GTK backend: the only thing that
happens inside seat_notify_remote_exit is that we schedule a toplevel
callback, and all the real work happens later on when that callback is
called.
The particular situation where this makes a difference is if you
perform a user abort during proxy authentication (e.g. hit ^D at a
proxy password prompt), so that the main SSH backend gets
PLUGCLOSE_USER_ABORT and calls ssh_user_close. That doesn't
immediately close the socket; it just sets ssh->pending_close,
schedules a run of ssh_bpp_output_raw_data_callback, and returns.
So if seat_notify_remote_exit calls back _synchronously_ to
ssh_return_exitcode, it will see that the socket is still open and
return -1. But if it schedules a callback and waits, then the callback
to ssh_bpp_output_raw_data_callback will happen first, which will
close the socket, and then the exit processing will get the right
answer.
So the user-visible effect is that if you ^D a proxy auth prompt, GTK
PuTTY will close the whole window (assuming you didn't set close-on-
exit to 'never'), whereas Windows PuTTY will leave the window open,
and not even know that the connection is now shut (in that it'll still
ask 'Are you sure you want to close this session?' if you try to close
it by hand).
With this fix, Windows PuTTY behaves the same as GTK in this respect.
When the user provides a password on the PuTTY command line, via -pw
or -pwfile, the flag 'tried_once' inside cmdline_get_passwd_input() is
intended to arrange that we only try sending that password once, and
after we've sent it, we don't try again.
But this plays badly with the 'Restart Session' operation. If the
connection is lost and then restarted at user request, we _do_ want to
send that password again!
So this commit moves that static variable out into a small state
structure held by the client of cmdline_get_passwd_input. Each client
can decide how to manage that state itself.
Clients that support 'Restart Session' - i.e. just GUI PuTTY itself -
will initialise the state at the same time as instantiating the
backend, so that every time the session is restarted, we return
to (correctly) believing that we _haven't_ yet tried the password
provided on the command line.
But clients that don't support 'Restart Session' - i.e. Plink and file
transfer tools - can do the same thing that cmdline.c was doing
before: just keep the state in a static variable.
This also means that the GUI login tools will now retain the
command-line password in memory, whereas previously they'd have wiped
it out once it was used. But the other tools will still wipe and free
the password, because I've also added a 'bool restartable' flag to
cmdline_get_passwd_input to let it know when it _is_ allowed to do
that.
In the GUI tools, I don't see any way to get round that, because if
the session is restarted you _have_ to still have the password to use
again. (And you can't infer that that will never happen from the
CONF_close_on_exit setting, because that too could be changed in
mid-session.) On the other hand, I think it's not all that worrying,
because the use of either -pw or -pwfile means that a persistent copy
of your password is *already* stored somewhere, so another one isn't
too big a stretch.
(Due to the change of -pw policy in 0.77, the effect of this bug was
that an attempt to reconnect in a session set up this way would lead
to "Configured password was not accepted". In 0.76, the failure mode
was different: PuTTY would interactively prompt for the password,
having wiped it out of memory after it was used the first time round.)
In the changes around commit 420fe75552, I made the terminal
suspend output processing while it waited for a term_size() callback
in response to a resize request. Because on X11 there are unusual
circumstances in which you never receive that callback, I also added a
last-ditch 5-second timeout, so that eventually we'll resume terminal
output processing regardless.
But the timeout lives in terminal.c, in the cross-platform code. This
is pointless on Windows (where resize processing is synchronous, so we
always finish it before the timer code next gets called anyway), but I
decided it was easier to keep the whole mechanism in terminal.c in the
absence of a good reason not to.
Now I've found that reason. We _also_ generate window resizes locally
to the GTK front end, in response to the key combinations that change
the font size, and _those_ still have an asynchrony problem.
So, to begin with, I'm refactoring the request_resize system so that
now there's an explicit callback from the frontend to the terminal to
say 'Your resize request has now been processed, whether or not you've
received a term_size() call'. On Windows, this simplifies matters
greatly because we always know exactly when to call that, and don't
have to keep a 'have we called term_size() already?' flag. On GTK, the
timing complexity previously in terminal.c has moved into window.c.
No functional change (I hope). The payoff will be in the next commit.
The previous fix on pre-0.77 was non-disruptive and just enough to get
through my Coverity build (which uses winelib); but now that I look at
the rest of the Winelib build output, there are some further warnings
I should fix on main.
Most of them are more long/LONG confusion (specific to Winelib, rather
than real Windows); also, there's a multiple macro definition in
jump-list.c because Winelib defines _PROPVARIANT_INIT_DEFINED_ in
place of _PROPVARIANTINIT_DEFINED_ which we were testing for. (Bah.)
And in windows/window.c I used wcscmp without including <wchar.h>.
In spite of long vs LONG I still had to turn off one or two more
DLL-loading typechecks.
