nhyatt/putty-source
1
0
Fork 0
mirror of https://git.tartarus.org/simon/putty.git synced 2025-01-10 01:48:00 +00:00
Code Issues Projects Releases Wiki Activity
506a81d5ba
putty-source/settings.c
Jacob Nevins 3e6111243c r5080 didn't go far enough -- since 0.58, anyone on Unix who didn't previously 
have default settings for "bell overload" mode will have inherited a twitchy
set of defaults where bells are disabled after 2ms and enabled after 5ms,
rather than 2s and 5s as intended. This error has probably propagated into some
people's saved sessions by now, but there's not much to be done.

[originally from svn r8389]
[r5080 == 7647f57dc4]
2009-01-05 19:39:27 +00:00

937 lines
35 KiB
C
Raw Blame History

/*
* settings.c: read and write saved sessions. (platform-independent)
*/
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include "putty.h"
#include "storage.h"
/*
* Tables of string <-> enum value mappings
*/
struct keyval { char *s; int v; };
/* The cipher order given here is the default order. */
static const struct keyval ciphernames[] = {
{ "aes", CIPHER_AES },
{ "blowfish", CIPHER_BLOWFISH },
{ "3des", CIPHER_3DES },
{ "WARN", CIPHER_WARN },
{ "arcfour", CIPHER_ARCFOUR },
{ "des", CIPHER_DES }
};
static const struct keyval kexnames[] = {
{ "dh-gex-sha1", KEX_DHGEX },
{ "dh-group14-sha1", KEX_DHGROUP14 },
{ "dh-group1-sha1", KEX_DHGROUP1 },
{ "rsa", KEX_RSA },
{ "WARN", KEX_WARN }
};
/*
* All the terminal modes that we know about for the "TerminalModes"
* setting. (Also used by config.c for the drop-down list.)
* This is currently precisely the same as the set in ssh.c, but could
* in principle differ if other backends started to support tty modes
* (e.g., the pty backend).
*/
const char *const ttymodes[] = {
"INTR", "QUIT", "ERASE", "KILL", "EOF",
"EOL", "EOL2", "START", "STOP", "SUSP",
"DSUSP", "REPRINT", "WERASE", "LNEXT", "FLUSH",
"SWTCH", "STATUS", "DISCARD", "IGNPAR", "PARMRK",
"INPCK", "ISTRIP", "INLCR", "IGNCR", "ICRNL",
"IUCLC", "IXON", "IXANY", "IXOFF", "IMAXBEL",
"ISIG", "ICANON", "XCASE", "ECHO", "ECHOE",
"ECHOK", "ECHONL", "NOFLSH", "TOSTOP", "IEXTEN",
"ECHOCTL", "ECHOKE", "PENDIN", "OPOST", "OLCUC",
"ONLCR", "OCRNL", "ONOCR", "ONLRET", "CS7",
"CS8", "PARENB", "PARODD", NULL
};
/*
* Convenience functions to access the backends[] array
* (which is only present in tools that manage settings).
*/
Backend *backend_from_name(const char *name)
{
Backend **p;
for (p = backends; *p != NULL; p++)
if (!strcmp((*p)->name, name))
return *p;
return NULL;
}
Backend *backend_from_proto(int proto)
{
Backend **p;
for (p = backends; *p != NULL; p++)
if ((*p)->protocol == proto)
return *p;
return NULL;
}
int get_remote_username(Config *cfg, char *user, size_t len)
{
if (*cfg->username) {
strncpy(user, cfg->username, len);
user[len-1] = '\0';
} else {
if (cfg->username_from_env) {
/* Use local username. */
char *luser = get_username();
strncpy(user, luser, len);
user[len-1] = '\0';
sfree(luser);
} else {
*user = '\0';
}
}
return (*user != '\0');
}
static void gpps(void *handle, const char *name, const char *def,
char *val, int len)
{
if (!read_setting_s(handle, name, val, len)) {
char *pdef;
pdef = platform_default_s(name);
if (pdef) {
strncpy(val, pdef, len);
sfree(pdef);
} else {
strncpy(val, def, len);
}
val[len - 1] = '\0';
}
}
/*
* gppfont and gppfile cannot have local defaults, since the very
* format of a Filename or Font is platform-dependent. So the
* platform-dependent functions MUST return some sort of value.
*/
static void gppfont(void *handle, const char *name, FontSpec *result)
{
if (!read_setting_fontspec(handle, name, result))
*result = platform_default_fontspec(name);
}
static void gppfile(void *handle, const char *name, Filename *result)
{
if (!read_setting_filename(handle, name, result))
*result = platform_default_filename(name);
}
static void gppi(void *handle, char *name, int def, int *i)
{
def = platform_default_i(name, def);
*i = read_setting_i(handle, name, def);
}
/*
* Read a set of name-value pairs in the format we occasionally use:
* NAME\tVALUE\0NAME\tVALUE\0\0 in memory
* NAME=VALUE,NAME=VALUE, in storage
* `def' is in the storage format.
*/
static void gppmap(void *handle, char *name, char *def, char *val, int len)
{
char *buf = snewn(2*len, char), *p, *q;
gpps(handle, name, def, buf, 2*len);
p = buf;
q = val;
while (*p) {
while (*p && *p != ',') {
int c = *p++;
if (c == '=')
c = '\t';
if (c == '\\')
c = *p++;
*q++ = c;
}
if (*p == ',')
p++;
*q++ = '\0';
}
*q = '\0';
sfree(buf);
}
/*
* Write a set of name/value pairs in the above format.
*/
static void wmap(void *handle, char const *key, char const *value, int len)
{
char *buf = snewn(2*len, char), *p;
const char *q;
p = buf;
q = value;
while (*q) {
while (*q) {
int c = *q++;
if (c == '=' || c == ',' || c == '\\')
*p++ = '\\';
if (c == '\t')
c = '=';
*p++ = c;
}
*p++ = ',';
q++;
}
*p = '\0';
write_setting_s(handle, key, buf);
sfree(buf);
}
static int key2val(const struct keyval *mapping, int nmaps, char *key)
{
int i;
for (i = 0; i < nmaps; i++)
if (!strcmp(mapping[i].s, key)) return mapping[i].v;
return -1;
}
static const char *val2key(const struct keyval *mapping, int nmaps, int val)
{
int i;
for (i = 0; i < nmaps; i++)
if (mapping[i].v == val) return mapping[i].s;
return NULL;
}
/*
* Helper function to parse a comma-separated list of strings into
* a preference list array of values. Any missing values are added
* to the end and duplicates are weeded.
* XXX: assumes vals in 'mapping' are small +ve integers
*/
static void gprefs(void *sesskey, char *name, char *def,
const struct keyval *mapping, int nvals,
int *array)
{
char commalist[80];
char *tokarg = commalist;
int n;
unsigned long seen = 0; /* bitmap for weeding dups etc */
gpps(sesskey, name, def, commalist, sizeof(commalist));
/* Grotty parsing of commalist. */
n = 0;
do {
int v;
char *key;
key = strtok(tokarg, ","); /* sorry */
tokarg = NULL;
if (!key) break;
if (((v = key2val(mapping, nvals, key)) != -1) &&
!(seen & 1<<v)) {
array[n] = v;
n++;
seen |= 1<<v;
}
} while (n < nvals);
/* Add any missing values (backward compatibility ect). */
{
int i;
for (i = 0; i < nvals; i++) {
assert(mapping[i].v < 32);
if (!(seen & 1<<mapping[i].v)) {
array[n] = mapping[i].v;
n++;
}
}
}
}
/*
* Write out a preference list.
*/
static void wprefs(void *sesskey, char *name,
const struct keyval *mapping, int nvals,
int *array)
{
char buf[80] = ""; /* XXX assumed big enough */
int l = sizeof(buf)-1, i;
buf[l] = '\0';
for (i = 0; l > 0 && i < nvals; i++) {
const char *s = val2key(mapping, nvals, array[i]);
if (s) {
int sl = strlen(s);
if (i > 0) {
strncat(buf, ",", l);
l--;
}
strncat(buf, s, l);
l -= sl;
}
}
write_setting_s(sesskey, name, buf);
}
char *save_settings(char *section, Config * cfg)
{
void *sesskey;
char *errmsg;
sesskey = open_settings_w(section, &errmsg);
if (!sesskey)
return errmsg;
save_open_settings(sesskey, cfg);
close_settings_w(sesskey);
return NULL;
}
void save_open_settings(void *sesskey, Config *cfg)
{
int i;
char *p;
write_setting_i(sesskey, "Present", 1);
write_setting_s(sesskey, "HostName", cfg->host);
write_setting_filename(sesskey, "LogFileName", cfg->logfilename);
write_setting_i(sesskey, "LogType", cfg->logtype);
write_setting_i(sesskey, "LogFileClash", cfg->logxfovr);
write_setting_i(sesskey, "LogFlush", cfg->logflush);
write_setting_i(sesskey, "SSHLogOmitPasswords", cfg->logomitpass);
write_setting_i(sesskey, "SSHLogOmitData", cfg->logomitdata);
p = "raw";
{
const Backend *b = backend_from_proto(cfg->protocol);
if (b)
p = b->name;
}
write_setting_s(sesskey, "Protocol", p);
write_setting_i(sesskey, "PortNumber", cfg->port);
/* The CloseOnExit numbers are arranged in a different order from
* the standard FORCE_ON / FORCE_OFF / AUTO. */
write_setting_i(sesskey, "CloseOnExit", (cfg->close_on_exit+2)%3);
write_setting_i(sesskey, "WarnOnClose", !!cfg->warn_on_close);
write_setting_i(sesskey, "PingInterval", cfg->ping_interval / 60); /* minutes */
write_setting_i(sesskey, "PingIntervalSecs", cfg->ping_interval % 60); /* seconds */
write_setting_i(sesskey, "TCPNoDelay", cfg->tcp_nodelay);
write_setting_i(sesskey, "TCPKeepalives", cfg->tcp_keepalives);
write_setting_s(sesskey, "TerminalType", cfg->termtype);
write_setting_s(sesskey, "TerminalSpeed", cfg->termspeed);
wmap(sesskey, "TerminalModes", cfg->ttymodes, lenof(cfg->ttymodes));
/* Address family selection */
write_setting_i(sesskey, "AddressFamily", cfg->addressfamily);
/* proxy settings */
write_setting_s(sesskey, "ProxyExcludeList", cfg->proxy_exclude_list);
write_setting_i(sesskey, "ProxyDNS", (cfg->proxy_dns+2)%3);
write_setting_i(sesskey, "ProxyLocalhost", cfg->even_proxy_localhost);
write_setting_i(sesskey, "ProxyMethod", cfg->proxy_type);
write_setting_s(sesskey, "ProxyHost", cfg->proxy_host);
write_setting_i(sesskey, "ProxyPort", cfg->proxy_port);
write_setting_s(sesskey, "ProxyUsername", cfg->proxy_username);
write_setting_s(sesskey, "ProxyPassword", cfg->proxy_password);
write_setting_s(sesskey, "ProxyTelnetCommand", cfg->proxy_telnet_command);
wmap(sesskey, "Environment", cfg->environmt, lenof(cfg->environmt));
write_setting_s(sesskey, "UserName", cfg->username);
write_setting_i(sesskey, "UserNameFromEnvironment", cfg->username_from_env);
write_setting_s(sesskey, "LocalUserName", cfg->localusername);
write_setting_i(sesskey, "NoPTY", cfg->nopty);
write_setting_i(sesskey, "Compression", cfg->compression);
write_setting_i(sesskey, "TryAgent", cfg->tryagent);
write_setting_i(sesskey, "AgentFwd", cfg->agentfwd);
write_setting_i(sesskey, "GssapiFwd", cfg->gssapifwd);
write_setting_i(sesskey, "ChangeUsername", cfg->change_username);
wprefs(sesskey, "Cipher", ciphernames, CIPHER_MAX,
cfg->ssh_cipherlist);
wprefs(sesskey, "KEX", kexnames, KEX_MAX, cfg->ssh_kexlist);
write_setting_i(sesskey, "RekeyTime", cfg->ssh_rekey_time);
write_setting_s(sesskey, "RekeyBytes", cfg->ssh_rekey_data);
write_setting_i(sesskey, "SshNoAuth", cfg->ssh_no_userauth);
write_setting_i(sesskey, "AuthTIS", cfg->try_tis_auth);
write_setting_i(sesskey, "AuthKI", cfg->try_ki_auth);
write_setting_i(sesskey, "AuthGSSAPI", cfg->try_gssapi_auth);
write_setting_i(sesskey, "SshNoShell", cfg->ssh_no_shell);
write_setting_i(sesskey, "SshProt", cfg->sshprot);
write_setting_s(sesskey, "LogHost", cfg->loghost);
write_setting_i(sesskey, "SSH2DES", cfg->ssh2_des_cbc);
write_setting_filename(sesskey, "PublicKeyFile", cfg->keyfile);
write_setting_s(sesskey, "RemoteCommand", cfg->remote_cmd);
write_setting_i(sesskey, "RFCEnviron", cfg->rfc_environ);
write_setting_i(sesskey, "PassiveTelnet", cfg->passive_telnet);
write_setting_i(sesskey, "BackspaceIsDelete", cfg->bksp_is_delete);
write_setting_i(sesskey, "RXVTHomeEnd", cfg->rxvt_homeend);
write_setting_i(sesskey, "LinuxFunctionKeys", cfg->funky_type);
write_setting_i(sesskey, "NoApplicationKeys", cfg->no_applic_k);
write_setting_i(sesskey, "NoApplicationCursors", cfg->no_applic_c);
write_setting_i(sesskey, "NoMouseReporting", cfg->no_mouse_rep);
write_setting_i(sesskey, "NoRemoteResize", cfg->no_remote_resize);
write_setting_i(sesskey, "NoAltScreen", cfg->no_alt_screen);
write_setting_i(sesskey, "NoRemoteWinTitle", cfg->no_remote_wintitle);
write_setting_i(sesskey, "RemoteQTitleAction", cfg->remote_qtitle_action);
write_setting_i(sesskey, "NoDBackspace", cfg->no_dbackspace);
write_setting_i(sesskey, "NoRemoteCharset", cfg->no_remote_charset);
write_setting_i(sesskey, "ApplicationCursorKeys", cfg->app_cursor);
write_setting_i(sesskey, "ApplicationKeypad", cfg->app_keypad);
write_setting_i(sesskey, "NetHackKeypad", cfg->nethack_keypad);
write_setting_i(sesskey, "AltF4", cfg->alt_f4);
write_setting_i(sesskey, "AltSpace", cfg->alt_space);
write_setting_i(sesskey, "AltOnly", cfg->alt_only);
write_setting_i(sesskey, "ComposeKey", cfg->compose_key);
write_setting_i(sesskey, "CtrlAltKeys", cfg->ctrlaltkeys);
write_setting_i(sesskey, "TelnetKey", cfg->telnet_keyboard);
write_setting_i(sesskey, "TelnetRet", cfg->telnet_newline);
write_setting_i(sesskey, "LocalEcho", cfg->localecho);
write_setting_i(sesskey, "LocalEdit", cfg->localedit);
write_setting_s(sesskey, "Answerback", cfg->answerback);
write_setting_i(sesskey, "AlwaysOnTop", cfg->alwaysontop);
write_setting_i(sesskey, "FullScreenOnAltEnter", cfg->fullscreenonaltenter);
write_setting_i(sesskey, "HideMousePtr", cfg->hide_mouseptr);
write_setting_i(sesskey, "SunkenEdge", cfg->sunken_edge);
write_setting_i(sesskey, "WindowBorder", cfg->window_border);
write_setting_i(sesskey, "CurType", cfg->cursor_type);
write_setting_i(sesskey, "BlinkCur", cfg->blink_cur);
write_setting_i(sesskey, "Beep", cfg->beep);
write_setting_i(sesskey, "BeepInd", cfg->beep_ind);
write_setting_filename(sesskey, "BellWaveFile", cfg->bell_wavefile);
write_setting_i(sesskey, "BellOverload", cfg->bellovl);
write_setting_i(sesskey, "BellOverloadN", cfg->bellovl_n);
write_setting_i(sesskey, "BellOverloadT", cfg->bellovl_t
#ifdef PUTTY_UNIX_H
* 1000
#endif
);
write_setting_i(sesskey, "BellOverloadS", cfg->bellovl_s
#ifdef PUTTY_UNIX_H
* 1000
#endif
);
write_setting_i(sesskey, "ScrollbackLines", cfg->savelines);
write_setting_i(sesskey, "DECOriginMode", cfg->dec_om);
write_setting_i(sesskey, "AutoWrapMode", cfg->wrap_mode);
write_setting_i(sesskey, "LFImpliesCR", cfg->lfhascr);
write_setting_i(sesskey, "CRImpliesLF", cfg->crhaslf);
write_setting_i(sesskey, "DisableArabicShaping", cfg->arabicshaping);
write_setting_i(sesskey, "DisableBidi", cfg->bidi);
write_setting_i(sesskey, "WinNameAlways", cfg->win_name_always);
write_setting_s(sesskey, "WinTitle", cfg->wintitle);
write_setting_i(sesskey, "TermWidth", cfg->width);
write_setting_i(sesskey, "TermHeight", cfg->height);
write_setting_fontspec(sesskey, "Font", cfg->font);
write_setting_i(sesskey, "FontQuality", cfg->font_quality);
write_setting_i(sesskey, "FontVTMode", cfg->vtmode);
write_setting_i(sesskey, "UseSystemColours", cfg->system_colour);
write_setting_i(sesskey, "TryPalette", cfg->try_palette);
write_setting_i(sesskey, "ANSIColour", cfg->ansi_colour);
write_setting_i(sesskey, "Xterm256Colour", cfg->xterm_256_colour);
write_setting_i(sesskey, "BoldAsColour", cfg->bold_colour);
for (i = 0; i < 22; i++) {
char buf[20], buf2[30];
sprintf(buf, "Colour%d", i);
sprintf(buf2, "%d,%d,%d", cfg->colours[i][0],
cfg->colours[i][1], cfg->colours[i][2]);
write_setting_s(sesskey, buf, buf2);
}
write_setting_i(sesskey, "RawCNP", cfg->rawcnp);
write_setting_i(sesskey, "PasteRTF", cfg->rtf_paste);
write_setting_i(sesskey, "MouseIsXterm", cfg->mouse_is_xterm);
write_setting_i(sesskey, "RectSelect", cfg->rect_select);
write_setting_i(sesskey, "MouseOverride", cfg->mouse_override);
for (i = 0; i < 256; i += 32) {
char buf[20], buf2[256];
int j;
sprintf(buf, "Wordness%d", i);
*buf2 = '\0';
for (j = i; j < i + 32; j++) {
sprintf(buf2 + strlen(buf2), "%s%d",
(*buf2 ? "," : ""), cfg->wordness[j]);
}
write_setting_s(sesskey, buf, buf2);
}
write_setting_s(sesskey, "LineCodePage", cfg->line_codepage);
write_setting_i(sesskey, "CJKAmbigWide", cfg->cjk_ambig_wide);
write_setting_i(sesskey, "UTF8Override", cfg->utf8_override);
write_setting_s(sesskey, "Printer", cfg->printer);
write_setting_i(sesskey, "CapsLockCyr", cfg->xlat_capslockcyr);
write_setting_i(sesskey, "ScrollBar", cfg->scrollbar);
write_setting_i(sesskey, "ScrollBarFullScreen", cfg->scrollbar_in_fullscreen);
write_setting_i(sesskey, "ScrollOnKey", cfg->scroll_on_key);
write_setting_i(sesskey, "ScrollOnDisp", cfg->scroll_on_disp);
write_setting_i(sesskey, "EraseToScrollback", cfg->erase_to_scrollback);
write_setting_i(sesskey, "LockSize", cfg->resize_action);
write_setting_i(sesskey, "BCE", cfg->bce);
write_setting_i(sesskey, "BlinkText", cfg->blinktext);
write_setting_i(sesskey, "X11Forward", cfg->x11_forward);
write_setting_s(sesskey, "X11Display", cfg->x11_display);
write_setting_i(sesskey, "X11AuthType", cfg->x11_auth);
write_setting_filename(sesskey, "X11AuthFile", cfg->xauthfile);
write_setting_i(sesskey, "LocalPortAcceptAll", cfg->lport_acceptall);
write_setting_i(sesskey, "RemotePortAcceptAll", cfg->rport_acceptall);
wmap(sesskey, "PortForwardings", cfg->portfwd, lenof(cfg->portfwd));
write_setting_i(sesskey, "BugIgnore1", 2-cfg->sshbug_ignore1);
write_setting_i(sesskey, "BugPlainPW1", 2-cfg->sshbug_plainpw1);
write_setting_i(sesskey, "BugRSA1", 2-cfg->sshbug_rsa1);
write_setting_i(sesskey, "BugHMAC2", 2-cfg->sshbug_hmac2);
write_setting_i(sesskey, "BugDeriveKey2", 2-cfg->sshbug_derivekey2);
write_setting_i(sesskey, "BugRSAPad2", 2-cfg->sshbug_rsapad2);
write_setting_i(sesskey, "BugPKSessID2", 2-cfg->sshbug_pksessid2);
write_setting_i(sesskey, "BugRekey2", 2-cfg->sshbug_rekey2);
write_setting_i(sesskey, "BugMaxPkt2", 2-cfg->sshbug_maxpkt2);
write_setting_i(sesskey, "StampUtmp", cfg->stamp_utmp);
write_setting_i(sesskey, "LoginShell", cfg->login_shell);
write_setting_i(sesskey, "ScrollbarOnLeft", cfg->scrollbar_on_left);
write_setting_fontspec(sesskey, "BoldFont", cfg->boldfont);
write_setting_fontspec(sesskey, "WideFont", cfg->widefont);
write_setting_fontspec(sesskey, "WideBoldFont", cfg->wideboldfont);
write_setting_i(sesskey, "ShadowBold", cfg->shadowbold);
write_setting_i(sesskey, "ShadowBoldOffset", cfg->shadowboldoffset);
write_setting_s(sesskey, "SerialLine", cfg->serline);
write_setting_i(sesskey, "SerialSpeed", cfg->serspeed);
write_setting_i(sesskey, "SerialDataBits", cfg->serdatabits);
write_setting_i(sesskey, "SerialStopHalfbits", cfg->serstopbits);
write_setting_i(sesskey, "SerialParity", cfg->serparity);
write_setting_i(sesskey, "SerialFlowControl", cfg->serflow);
}
void load_settings(char *section, Config * cfg)
{
void *sesskey;
sesskey = open_settings_r(section);
load_open_settings(sesskey, cfg);
close_settings_r(sesskey);
}
void load_open_settings(void *sesskey, Config *cfg)
{
int i;
char prot[10];
cfg->ssh_subsys = 0; /* FIXME: load this properly */
cfg->remote_cmd_ptr = NULL;
cfg->remote_cmd_ptr2 = NULL;
cfg->ssh_nc_host[0] = '\0';
gpps(sesskey, "HostName", "", cfg->host, sizeof(cfg->host));
gppfile(sesskey, "LogFileName", &cfg->logfilename);
gppi(sesskey, "LogType", 0, &cfg->logtype);
gppi(sesskey, "LogFileClash", LGXF_ASK, &cfg->logxfovr);
gppi(sesskey, "LogFlush", 1, &cfg->logflush);
gppi(sesskey, "SSHLogOmitPasswords", 1, &cfg->logomitpass);
gppi(sesskey, "SSHLogOmitData", 0, &cfg->logomitdata);
gpps(sesskey, "Protocol", "default", prot, 10);
cfg->protocol = default_protocol;
cfg->port = default_port;
{
const Backend *b = backend_from_name(prot);
if (b) {
cfg->protocol = b->protocol;
gppi(sesskey, "PortNumber", default_port, &cfg->port);
}
}
/* Address family selection */
gppi(sesskey, "AddressFamily", ADDRTYPE_UNSPEC, &cfg->addressfamily);
/* The CloseOnExit numbers are arranged in a different order from
* the standard FORCE_ON / FORCE_OFF / AUTO. */
gppi(sesskey, "CloseOnExit", 1, &i); cfg->close_on_exit = (i+1)%3;
gppi(sesskey, "WarnOnClose", 1, &cfg->warn_on_close);
{
/* This is two values for backward compatibility with 0.50/0.51 */
int pingmin, pingsec;
gppi(sesskey, "PingInterval", 0, &pingmin);
gppi(sesskey, "PingIntervalSecs", 0, &pingsec);
cfg->ping_interval = pingmin * 60 + pingsec;
}
gppi(sesskey, "TCPNoDelay", 1, &cfg->tcp_nodelay);
gppi(sesskey, "TCPKeepalives", 0, &cfg->tcp_keepalives);
gpps(sesskey, "TerminalType", "xterm", cfg->termtype,
sizeof(cfg->termtype));
gpps(sesskey, "TerminalSpeed", "38400,38400", cfg->termspeed,
sizeof(cfg->termspeed));
{
/* This hardcodes a big set of defaults in any new saved
* sessions. Let's hope we don't change our mind. */
int i;
char *def = dupstr("");
/* Default: all set to "auto" */
for (i = 0; ttymodes[i]; i++) {
char *def2 = dupprintf("%s%s=A,", def, ttymodes[i]);
sfree(def);
def = def2;
}
gppmap(sesskey, "TerminalModes", def,
cfg->ttymodes, lenof(cfg->ttymodes));
sfree(def);
}
/* proxy settings */
gpps(sesskey, "ProxyExcludeList", "", cfg->proxy_exclude_list,
sizeof(cfg->proxy_exclude_list));
gppi(sesskey, "ProxyDNS", 1, &i); cfg->proxy_dns = (i+1)%3;
gppi(sesskey, "ProxyLocalhost", 0, &cfg->even_proxy_localhost);
gppi(sesskey, "ProxyMethod", -1, &cfg->proxy_type);
if (cfg->proxy_type == -1) {
int i;
gppi(sesskey, "ProxyType", 0, &i);
if (i == 0)
cfg->proxy_type = PROXY_NONE;
else if (i == 1)
cfg->proxy_type = PROXY_HTTP;
else if (i == 3)
cfg->proxy_type = PROXY_TELNET;
else if (i == 4)
cfg->proxy_type = PROXY_CMD;
else {
gppi(sesskey, "ProxySOCKSVersion", 5, &i);
if (i == 5)
cfg->proxy_type = PROXY_SOCKS5;
else
cfg->proxy_type = PROXY_SOCKS4;
}
}
gpps(sesskey, "ProxyHost", "proxy", cfg->proxy_host,
sizeof(cfg->proxy_host));
gppi(sesskey, "ProxyPort", 80, &cfg->proxy_port);
gpps(sesskey, "ProxyUsername", "", cfg->proxy_username,
sizeof(cfg->proxy_username));
gpps(sesskey, "ProxyPassword", "", cfg->proxy_password,
sizeof(cfg->proxy_password));
gpps(sesskey, "ProxyTelnetCommand", "connect %host %port\\n",
cfg->proxy_telnet_command, sizeof(cfg->proxy_telnet_command));
gppmap(sesskey, "Environment", "", cfg->environmt, lenof(cfg->environmt));
gpps(sesskey, "UserName", "", cfg->username, sizeof(cfg->username));
gppi(sesskey, "UserNameFromEnvironment", 0, &cfg->username_from_env);
gpps(sesskey, "LocalUserName", "", cfg->localusername,
sizeof(cfg->localusername));
gppi(sesskey, "NoPTY", 0, &cfg->nopty);
gppi(sesskey, "Compression", 0, &cfg->compression);
gppi(sesskey, "TryAgent", 1, &cfg->tryagent);
gppi(sesskey, "AgentFwd", 0, &cfg->agentfwd);
gppi(sesskey, "ChangeUsername", 0, &cfg->change_username);
gppi(sesskey, "GssapiFwd", 0, &cfg->gssapifwd);
gprefs(sesskey, "Cipher", "\0",
ciphernames, CIPHER_MAX, cfg->ssh_cipherlist);
{
/* Backward-compatibility: we used to have an option to
* disable gex under the "bugs" panel after one report of
* a server which offered it then choked, but we never got
* a server version string or any other reports. */
char *default_kexes;
gppi(sesskey, "BugDHGEx2", 0, &i); i = 2-i;
if (i == FORCE_ON)
default_kexes = "dh-group14-sha1,dh-group1-sha1,rsa,WARN,dh-gex-sha1";
else
default_kexes = "dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN";
gprefs(sesskey, "KEX", default_kexes,
kexnames, KEX_MAX, cfg->ssh_kexlist);
}
gppi(sesskey, "RekeyTime", 60, &cfg->ssh_rekey_time);
gpps(sesskey, "RekeyBytes", "1G", cfg->ssh_rekey_data,
sizeof(cfg->ssh_rekey_data));
gppi(sesskey, "SshProt", 2, &cfg->sshprot);
gpps(sesskey, "LogHost", "", cfg->loghost, sizeof(cfg->loghost));
gppi(sesskey, "SSH2DES", 0, &cfg->ssh2_des_cbc);
gppi(sesskey, "SshNoAuth", 0, &cfg->ssh_no_userauth);
gppi(sesskey, "AuthTIS", 0, &cfg->try_tis_auth);
gppi(sesskey, "AuthKI", 1, &cfg->try_ki_auth);
gppi(sesskey, "AuthGSSAPI", 1, &cfg->try_gssapi_auth);
gppi(sesskey, "SshNoShell", 0, &cfg->ssh_no_shell);
gppfile(sesskey, "PublicKeyFile", &cfg->keyfile);
gpps(sesskey, "RemoteCommand", "", cfg->remote_cmd,
sizeof(cfg->remote_cmd));
gppi(sesskey, "RFCEnviron", 0, &cfg->rfc_environ);
gppi(sesskey, "PassiveTelnet", 0, &cfg->passive_telnet);
gppi(sesskey, "BackspaceIsDelete", 1, &cfg->bksp_is_delete);
gppi(sesskey, "RXVTHomeEnd", 0, &cfg->rxvt_homeend);
gppi(sesskey, "LinuxFunctionKeys", 0, &cfg->funky_type);
gppi(sesskey, "NoApplicationKeys", 0, &cfg->no_applic_k);
gppi(sesskey, "NoApplicationCursors", 0, &cfg->no_applic_c);
gppi(sesskey, "NoMouseReporting", 0, &cfg->no_mouse_rep);
gppi(sesskey, "NoRemoteResize", 0, &cfg->no_remote_resize);
gppi(sesskey, "NoAltScreen", 0, &cfg->no_alt_screen);
gppi(sesskey, "NoRemoteWinTitle", 0, &cfg->no_remote_wintitle);
{
/* Backward compatibility */
int no_remote_qtitle;
gppi(sesskey, "NoRemoteQTitle", 1, &no_remote_qtitle);
/* We deliberately interpret the old setting of "no response" as
* "empty string". This changes the behaviour, but hopefully for
* the better; the user can always recover the old behaviour. */
gppi(sesskey, "RemoteQTitleAction",
no_remote_qtitle ? TITLE_EMPTY : TITLE_REAL,
&cfg->remote_qtitle_action);
}
gppi(sesskey, "NoDBackspace", 0, &cfg->no_dbackspace);
gppi(sesskey, "NoRemoteCharset", 0, &cfg->no_remote_charset);
gppi(sesskey, "ApplicationCursorKeys", 0, &cfg->app_cursor);
gppi(sesskey, "ApplicationKeypad", 0, &cfg->app_keypad);
gppi(sesskey, "NetHackKeypad", 0, &cfg->nethack_keypad);
gppi(sesskey, "AltF4", 1, &cfg->alt_f4);
gppi(sesskey, "AltSpace", 0, &cfg->alt_space);
gppi(sesskey, "AltOnly", 0, &cfg->alt_only);
gppi(sesskey, "ComposeKey", 0, &cfg->compose_key);
gppi(sesskey, "CtrlAltKeys", 1, &cfg->ctrlaltkeys);
gppi(sesskey, "TelnetKey", 0, &cfg->telnet_keyboard);
gppi(sesskey, "TelnetRet", 1, &cfg->telnet_newline);
gppi(sesskey, "LocalEcho", AUTO, &cfg->localecho);
gppi(sesskey, "LocalEdit", AUTO, &cfg->localedit);
gpps(sesskey, "Answerback", "PuTTY", cfg->answerback,
sizeof(cfg->answerback));
gppi(sesskey, "AlwaysOnTop", 0, &cfg->alwaysontop);
gppi(sesskey, "FullScreenOnAltEnter", 0, &cfg->fullscreenonaltenter);
gppi(sesskey, "HideMousePtr", 0, &cfg->hide_mouseptr);
gppi(sesskey, "SunkenEdge", 0, &cfg->sunken_edge);
gppi(sesskey, "WindowBorder", 1, &cfg->window_border);
gppi(sesskey, "CurType", 0, &cfg->cursor_type);
gppi(sesskey, "BlinkCur", 0, &cfg->blink_cur);
/* pedantic compiler tells me I can't use &cfg->beep as an int * :-) */
gppi(sesskey, "Beep", 1, &cfg->beep);
gppi(sesskey, "BeepInd", 0, &cfg->beep_ind);
gppfile(sesskey, "BellWaveFile", &cfg->bell_wavefile);
gppi(sesskey, "BellOverload", 1, &cfg->bellovl);
gppi(sesskey, "BellOverloadN", 5, &cfg->bellovl_n);
gppi(sesskey, "BellOverloadT", 2*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
, &i);
cfg->bellovl_t = i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
;
gppi(sesskey, "BellOverloadS", 5*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
, &i);
cfg->bellovl_s = i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
;
gppi(sesskey, "ScrollbackLines", 200, &cfg->savelines);
gppi(sesskey, "DECOriginMode", 0, &cfg->dec_om);
gppi(sesskey, "AutoWrapMode", 1, &cfg->wrap_mode);
gppi(sesskey, "LFImpliesCR", 0, &cfg->lfhascr);
gppi(sesskey, "CRImpliesLF", 0, &cfg->crhaslf);
gppi(sesskey, "DisableArabicShaping", 0, &cfg->arabicshaping);
gppi(sesskey, "DisableBidi", 0, &cfg->bidi);
gppi(sesskey, "WinNameAlways", 1, &cfg->win_name_always);
gpps(sesskey, "WinTitle", "", cfg->wintitle, sizeof(cfg->wintitle));
gppi(sesskey, "TermWidth", 80, &cfg->width);
gppi(sesskey, "TermHeight", 24, &cfg->height);
gppfont(sesskey, "Font", &cfg->font);
gppi(sesskey, "FontQuality", FQ_DEFAULT, &cfg->font_quality);
gppi(sesskey, "FontVTMode", VT_UNICODE, (int *) &cfg->vtmode);
gppi(sesskey, "UseSystemColours", 0, &cfg->system_colour);
gppi(sesskey, "TryPalette", 0, &cfg->try_palette);
gppi(sesskey, "ANSIColour", 1, &cfg->ansi_colour);
gppi(sesskey, "Xterm256Colour", 1, &cfg->xterm_256_colour);
gppi(sesskey, "BoldAsColour", 1, &cfg->bold_colour);
for (i = 0; i < 22; i++) {
static const char *const defaults[] = {
"187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
"0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
"0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
"85,85,255", "187,0,187", "255,85,255", "0,187,187",
"85,255,255", "187,187,187", "255,255,255"
};
char buf[20], buf2[30];
int c0, c1, c2;
sprintf(buf, "Colour%d", i);
gpps(sesskey, buf, defaults[i], buf2, sizeof(buf2));
if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
cfg->colours[i][0] = c0;
cfg->colours[i][1] = c1;
cfg->colours[i][2] = c2;
}
}
gppi(sesskey, "RawCNP", 0, &cfg->rawcnp);
gppi(sesskey, "PasteRTF", 0, &cfg->rtf_paste);
gppi(sesskey, "MouseIsXterm", 0, &cfg->mouse_is_xterm);
gppi(sesskey, "RectSelect", 0, &cfg->rect_select);
gppi(sesskey, "MouseOverride", 1, &cfg->mouse_override);
for (i = 0; i < 256; i += 32) {
static const char *const defaults[] = {
"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
"0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
};
char buf[20], buf2[256], *p;
int j;
sprintf(buf, "Wordness%d", i);
gpps(sesskey, buf, defaults[i / 32], buf2, sizeof(buf2));
p = buf2;
for (j = i; j < i + 32; j++) {
char *q = p;
while (*p && *p != ',')
p++;
if (*p == ',')
*p++ = '\0';
cfg->wordness[j] = atoi(q);
}
}
/*
* The empty default for LineCodePage will be converted later
* into a plausible default for the locale.
*/
gpps(sesskey, "LineCodePage", "", cfg->line_codepage,
sizeof(cfg->line_codepage));
gppi(sesskey, "CJKAmbigWide", 0, &cfg->cjk_ambig_wide);
gppi(sesskey, "UTF8Override", 1, &cfg->utf8_override);
gpps(sesskey, "Printer", "", cfg->printer, sizeof(cfg->printer));
gppi (sesskey, "CapsLockCyr", 0, &cfg->xlat_capslockcyr);
gppi(sesskey, "ScrollBar", 1, &cfg->scrollbar);
gppi(sesskey, "ScrollBarFullScreen", 0, &cfg->scrollbar_in_fullscreen);
gppi(sesskey, "ScrollOnKey", 0, &cfg->scroll_on_key);
gppi(sesskey, "ScrollOnDisp", 1, &cfg->scroll_on_disp);
gppi(sesskey, "EraseToScrollback", 1, &cfg->erase_to_scrollback);
gppi(sesskey, "LockSize", 0, &cfg->resize_action);
gppi(sesskey, "BCE", 1, &cfg->bce);
gppi(sesskey, "BlinkText", 0, &cfg->blinktext);
gppi(sesskey, "X11Forward", 0, &cfg->x11_forward);
gpps(sesskey, "X11Display", "", cfg->x11_display,
sizeof(cfg->x11_display));
gppi(sesskey, "X11AuthType", X11_MIT, &cfg->x11_auth);
gppfile(sesskey, "X11AuthFile", &cfg->xauthfile);
gppi(sesskey, "LocalPortAcceptAll", 0, &cfg->lport_acceptall);
gppi(sesskey, "RemotePortAcceptAll", 0, &cfg->rport_acceptall);
gppmap(sesskey, "PortForwardings", "", cfg->portfwd, lenof(cfg->portfwd));
gppi(sesskey, "BugIgnore1", 0, &i); cfg->sshbug_ignore1 = 2-i;
gppi(sesskey, "BugPlainPW1", 0, &i); cfg->sshbug_plainpw1 = 2-i;
gppi(sesskey, "BugRSA1", 0, &i); cfg->sshbug_rsa1 = 2-i;
{
int i;
gppi(sesskey, "BugHMAC2", 0, &i); cfg->sshbug_hmac2 = 2-i;
if (cfg->sshbug_hmac2 == AUTO) {
gppi(sesskey, "BuggyMAC", 0, &i);
if (i == 1)
cfg->sshbug_hmac2 = FORCE_ON;
}
}
gppi(sesskey, "BugDeriveKey2", 0, &i); cfg->sshbug_derivekey2 = 2-i;
gppi(sesskey, "BugRSAPad2", 0, &i); cfg->sshbug_rsapad2 = 2-i;
gppi(sesskey, "BugPKSessID2", 0, &i); cfg->sshbug_pksessid2 = 2-i;
gppi(sesskey, "BugRekey2", 0, &i); cfg->sshbug_rekey2 = 2-i;
gppi(sesskey, "BugMaxPkt2", 0, &i); cfg->sshbug_maxpkt2 = 2-i;
cfg->ssh_simple = FALSE;
gppi(sesskey, "StampUtmp", 1, &cfg->stamp_utmp);
gppi(sesskey, "LoginShell", 1, &cfg->login_shell);
gppi(sesskey, "ScrollbarOnLeft", 0, &cfg->scrollbar_on_left);
gppi(sesskey, "ShadowBold", 0, &cfg->shadowbold);
gppfont(sesskey, "BoldFont", &cfg->boldfont);
gppfont(sesskey, "WideFont", &cfg->widefont);
gppfont(sesskey, "WideBoldFont", &cfg->wideboldfont);
gppi(sesskey, "ShadowBoldOffset", 1, &cfg->shadowboldoffset);
gpps(sesskey, "SerialLine", "", cfg->serline, sizeof(cfg->serline));
gppi(sesskey, "SerialSpeed", 9600, &cfg->serspeed);
gppi(sesskey, "SerialDataBits", 8, &cfg->serdatabits);
gppi(sesskey, "SerialStopHalfbits", 2, &cfg->serstopbits);
gppi(sesskey, "SerialParity", SER_PAR_NONE, &cfg->serparity);
gppi(sesskey, "SerialFlowControl", SER_FLOW_XONXOFF, &cfg->serflow);
}
void do_defaults(char *session, Config * cfg)
{
load_settings(session, cfg);
}
static int sessioncmp(const void *av, const void *bv)
{
const char *a = *(const char *const *) av;
const char *b = *(const char *const *) bv;
/*
* Alphabetical order, except that "Default Settings" is a
* special case and comes first.
*/
if (!strcmp(a, "Default Settings"))
return -1; /* a comes first */
if (!strcmp(b, "Default Settings"))
return +1; /* b comes first */
/*
* FIXME: perhaps we should ignore the first & in determining
* sort order.
*/
return strcmp(a, b); /* otherwise, compare normally */
}
void get_sesslist(struct sesslist *list, int allocate)
{
char otherbuf[2048];
int buflen, bufsize, i;
char *p, *ret;
void *handle;
if (allocate) {
buflen = bufsize = 0;
list->buffer = NULL;
if ((handle = enum_settings_start()) != NULL) {
do {
ret = enum_settings_next(handle, otherbuf, sizeof(otherbuf));
if (ret) {
int len = strlen(otherbuf) + 1;
if (bufsize < buflen + len) {
bufsize = buflen + len + 2048;
list->buffer = sresize(list->buffer, bufsize, char);
}
strcpy(list->buffer + buflen, otherbuf);
buflen += strlen(list->buffer + buflen) + 1;
}
} while (ret);
enum_settings_finish(handle);
}
list->buffer = sresize(list->buffer, buflen + 1, char);
list->buffer[buflen] = '\0';
/*
* Now set up the list of sessions. Note that "Default
* Settings" must always be claimed to exist, even if it
* doesn't really.
*/
p = list->buffer;
list->nsessions = 1; /* "Default Settings" counts as one */
while (*p) {
if (strcmp(p, "Default Settings"))
list->nsessions++;
while (*p)
p++;
p++;
}
list->sessions = snewn(list->nsessions + 1, char *);
list->sessions[0] = "Default Settings";
p = list->buffer;
i = 1;
while (*p) {
if (strcmp(p, "Default Settings"))
list->sessions[i++] = p;
while (*p)
p++;
p++;
}
qsort(list->sessions, i, sizeof(char *), sessioncmp);
} else {
sfree(list->buffer);
sfree(list->sessions);
list->buffer = NULL;
list->sessions = NULL;
}
}
Reference in New Issue View Git Blame Copy Permalink