putty-source/doc/pubkey.but

\versionid $Id: pubkey.but,v 1.5 2001/09/22 20:52:21 simon Exp $

\# FIXME: passphrases, examples (e.g what does a key for pasting into
\# authorized_keys look like?), index entries, links.

\C{pubkey} Using public keys for SSH authentication

\H{pubkey-intro} Public key authentication - an introduction

Public key authentication is an alternative means of identifying
yourself to a login server, instead of typing a password. It is more
secure and more flexible, but more difficult to set up.

In conventional password authentication, you prove you are who you
claim to be by proving that you know the correct password. The only
way to prove you know the password is to tell the server what you
think the password is. This means that if the server has been
hacked, or \e{spoofed} (see \k{gs-hostkey}), an attacker can learn
your password.

Public key authentication solves this problem. You generate a \e{key
pair}, consisting of a public key (which everybody is allowed to
know) and a private key (which you keep secret and do not give to
anybody). The private key is able to generate \e{signatures}.
A signature created using your private key cannot be forged by
anybody who does not have that key; but anybody who has your public
key can verify that a particular signature is genuine.

So you generate a key pair on your own computer, and you copy the
public key to the server. Then, when the server asks you to prove
who you are, PuTTY can generate a signature using your private key.
The server can verify that signature (since it has your public key)
and allow you to log in. Now if the server is hacked or spoofed, the
attacker does not gain your private key or password; they only gain
one signature. And signatures cannot be re-used, so they have gained
nothing.

There is a problem with this: if your private key is stored
unprotected on your own computer, then anybody who gains access to
\e{that} will be able to generate signatures as if they were you. So
they will be able to log in to your server under your account. For
this reason, your private key is usually \e{encrypted} when it is
stored on your local machine, using a passphrase of your choice. In
order to generate a signature, PuTTY must decrypt the key, so you
have to type your passphrase.

This can make public-key authentication less convenient than
password authentication: every time you log in to the server,
instead of typing a short password, you have to type a longer
passphrase. One solution to this is to use an \e{authentication
agent}, a separate program which holds decrypted private keys and
generates signatures on request. PuTTY's authentication agent is
called Pageant. When you begin a Windows session, you start Pageant
and load your public key into it (typing your passphrase once). For
the rest of your session, you can start PuTTY any number of times
and Pageant will automatically generate signatures without you
having to do anything. When you close your Windows session, Pageant
shuts down, without ever having stored your decrypted private key on
disk. Many people feel this is a good compromise between security
and convenience. See \k{pageant} for further details.

\S{pubkey-types} Different types of public key

The PuTTY key generator, described in \k{pubkey-puttygen}, offers
you the opportunity to generate several types of key pair:

\b An RSA key for use with the SSH 1 protocol.
\b An RSA key for use with the SSH 2 protocol.
\b A DSA key for use with the SSH 2 protocol.

The SSH 1 protocol only supports RSA keys; if you will be connecting
using the SSH 1 protocol, you must select the first key type or your
key will be completely useless.

SSH 2 supports more than one key type. The two types supported by
PuTTY are RSA and DSA.

The PuTTY developers \e{strongly} recommend you use RSA. DSA has an
intrinsic weakness which makes it very easy to create a signature
which contains enough information to give away the \e{private} key!
This would allow an attacker to pretend to be you for any number of
future sessions. PuTTY's implementation has taken very careful
precautions to avoid this weakness, but we cannot be 100% certain we
have managed it, and if you have the choice we strongly recommend
using RSA keys instead.

If you really need to connect to an SSH server which only supports
DSA, then you probably have no choice but to use DSA. If you do use
DSA, we recommend you do not use the same key to authenticate with
more than one server.

\H{pubkey-puttygen} PuTTYgen: Key generator for PuTTY

PuTTYgen is a key generator. It generates pairs of public and private
keys to be used with PuTTY, PSCP, and Plink, as well as the PuTTY
authentication agent, Pageant (see \k{pageant}).  PuTTYgen generates
RSA keys.

When you run PuTTYgen you will see a window where you have two
choices: \e{Generate} new public/private key pair or \e{Load} an
existing private key.

\S{pubkey-puttygen-generate} Generate a new key

Before generating a new key you have to choose the strength of the
encryption, and the type of the key (see \k{pubkey-types}). With
\e{Parameters} you define the strength of the key. The default of
1024 should be OK for most users.

Pressing the \e{Generate} button starts the process of generating a
new key pair. You then have to move the mouse over the blank area in
order to generate random data for the algorithm. Continue until the
progress bar is complete.

As soon as enough random data is available the key is generated.  This
may take a little while, especially on slow machines.  Once the key is
generated, its details appear in the \e{Key} part of the PuTTYgen
window.

Now you can change the \e{Key comment} to something more meaningful
than the default (which is based on the current date).  e.g. add the
name of the host you will use it for. When using multiple keys a
meaningful comment may help you remember which passphrase to use!  You
should always enter a \e{Key passphrase} and \e{Confirm passphrase} to
protect your keys.

\# FIXME: Mention a good length for a passphrase. (I think Schneier
\# said something about this on counterpane.com once.)

\# In case people don't like the idea of exchanging a short password
\# typed every time for a longer passphrase typed every time, link
\# to the Pageant chapter.

Finally save the key by pressing the \e{Save} button. Do not close the
window but proceed with step \k{pubkey-gettingready}, otherwise you
will have to \e{Load} the private key again as described below.

\S{pubkey-puttygen-load} Load and modify a key

PuTTYgen does not store the public key in a file by default. If you
have to distribute the public key you can press the \e{Load} button,
select the private key file, and PuTTYgen will give you the public key
again.  You can also change the comment and passphrase for your
private key this way. Just modify the values and \e{Save} the key.

\S{pubkey-gettingready} Getting ready for public key authentication

Connect to your SSH server using PuTTY with the SSH protocol. When the
connection succeeds you will be prompted for your user name and
password to login. Once logged in, you must configure the server to
accept your public key for authentication:

\b If your server is using the SSH 1 protocol, you should change
into the \c{.ssh} directory and open the file \c{authorized_keys}
with your favorite editor. (You may have to create this file if this
is the first key you have put in it). Then switch to the PuTTYgen
window, select all of the text in the \e{Public key for pasting into
authorized_keys file} box, and copy it to the clipboard
(\c{Ctrl+C}). Then, switch back to the PuTTY window and insert the
data into the open file, making sure it ends up all on one line.
Save the file.

\b If your server is OpenSSH and is using the SSH 2 protocol, you
should follow the same instructions except that the file will be
called \c{authorized_keys2}.

\b If your server is \cw{ssh.com}'s SSH 2 product, you need to save
a \e{public} key file from PuTTYgen, and copy that into the
\c{.ssh2} directory on the server. Then you should go into that
\c{.ssh2} directory, and edit (or create) a file called
\c{authorization}. In this file you should put a line like \c{Key
mykey.pub}, with \c{mykey.pub} replaced by the name of your key
file.

\b For other SSH server software, you should refer to the manual for
that server.

From now on you should be able to use the private key for
authentication to this host.  Either select the private key in
PuTTY's \e{Connection}, \e{SSH} panel: \e{Private key file for
authentication} dialog or use it with Pageant as described in
\k{pageant}.