putty-source/sercfg.c

/*
 * sercfg.c - the serial-port specific parts of the PuTTY
 * configuration box. Centralised as cross-platform code because
 * more than one platform will want to use it, but not part of the
 * main configuration. The expectation is that each platform's
 * local config function will call out to ser_setup_config_box() if
 * it needs to set up the standard serial stuff. (Of course, it can
 * then apply local tweaks after ser_setup_config_box() returns, if
 * it needs to.)
 */

#include <assert.h>
#include <stdlib.h>

#include "putty.h"
#include "dialog.h"
#include "storage.h"

static void serial_parity_handler(union control *ctrl, dlgparam *dlg,
                                  void *data, int event)
{
    static const struct {
        const char *name;
        int val;
    } parities[] = {
        {"None", SER_PAR_NONE},
        {"Odd", SER_PAR_ODD},
        {"Even", SER_PAR_EVEN},
        {"Mark", SER_PAR_MARK},
        {"Space", SER_PAR_SPACE},
    };
    int mask = ctrl->listbox.context.i;
    int i, j;
    Conf *conf = (Conf *)data;

    if (event == EVENT_REFRESH) {
        /* Fetching this once at the start of the function ensures we
         * remember what the right value is supposed to be when
         * operations below cause reentrant calls to this function. */
        int oldparity = conf_get_int(conf, CONF_serparity);

        dlg_update_start(ctrl, dlg);
        dlg_listbox_clear(ctrl, dlg);
        for (i = 0; i < lenof(parities); i++)  {
            if (mask & (1 << i))
                dlg_listbox_addwithid(ctrl, dlg, parities[i].name,
                                      parities[i].val);
        }
        for (i = j = 0; i < lenof(parities); i++) {
            if (mask & (1 << i)) {
                if (oldparity == parities[i].val) {
                    dlg_listbox_select(ctrl, dlg, j);
                    break;
                }
                j++;
            }
        }
        if (i == lenof(parities)) {    /* an unsupported setting was chosen */
            dlg_listbox_select(ctrl, dlg, 0);
            oldparity = SER_PAR_NONE;
        }
        dlg_update_done(ctrl, dlg);
        conf_set_int(conf, CONF_serparity, oldparity);    /* restore */
    } else if (event == EVENT_SELCHANGE) {
        int i = dlg_listbox_index(ctrl, dlg);
        if (i < 0)
            i = SER_PAR_NONE;
        else
            i = dlg_listbox_getid(ctrl, dlg, i);
        conf_set_int(conf, CONF_serparity, i);
    }
}

static void serial_flow_handler(union control *ctrl, dlgparam *dlg,
                                void *data, int event)
{
    static const struct {
        const char *name;
        int val;
    } flows[] = {
        {"None", SER_FLOW_NONE},
        {"XON/XOFF", SER_FLOW_XONXOFF},
        {"RTS/CTS", SER_FLOW_RTSCTS},
        {"DSR/DTR", SER_FLOW_DSRDTR},
    };
    int mask = ctrl->listbox.context.i;
    int i, j;
    Conf *conf = (Conf *)data;

    if (event == EVENT_REFRESH) {
        /* Fetching this once at the start of the function ensures we
         * remember what the right value is supposed to be when
         * operations below cause reentrant calls to this function. */
        int oldflow = conf_get_int(conf, CONF_serflow);

        dlg_update_start(ctrl, dlg);
        dlg_listbox_clear(ctrl, dlg);
        for (i = 0; i < lenof(flows); i++)  {
            if (mask & (1 << i))
                dlg_listbox_addwithid(ctrl, dlg, flows[i].name, flows[i].val);
        }
        for (i = j = 0; i < lenof(flows); i++) {
            if (mask & (1 << i)) {
                if (oldflow == flows[i].val) {
                    dlg_listbox_select(ctrl, dlg, j);
                    break;
                }
                j++;
            }
        }
        if (i == lenof(flows)) {       /* an unsupported setting was chosen */
            dlg_listbox_select(ctrl, dlg, 0);
            oldflow = SER_FLOW_NONE;
        }
        dlg_update_done(ctrl, dlg);
        conf_set_int(conf, CONF_serflow, oldflow);/* restore */
    } else if (event == EVENT_SELCHANGE) {
        int i = dlg_listbox_index(ctrl, dlg);
        if (i < 0)
            i = SER_FLOW_NONE;
        else
            i = dlg_listbox_getid(ctrl, dlg, i);
        conf_set_int(conf, CONF_serflow, i);
    }
}

void ser_setup_config_box(struct controlbox *b, bool midsession,
                          int parity_mask, int flow_mask)
{
    struct controlset *s;
    union control *c;

    if (!midsession) {
        int i;

        /*
         * Add the serial back end to the protocols list at the
         * top of the config box.
         */
        s = ctrl_getset(b, "Session", "hostport",
                        "Specify the destination you want to connect to");

        for (i = 0; i < s->ncontrols; i++) {
            c = s->ctrls[i];
            if (c->generic.type == CTRL_RADIO &&
                c->generic.handler == config_protocolbuttons_handler) {
                c->radio.nbuttons++;
                c->radio.ncolumns++;
                c->radio.buttons =
                    sresize(c->radio.buttons, c->radio.nbuttons, char *);
                c->radio.buttons[c->radio.nbuttons-1] =
                    dupstr("Serial");
                c->radio.buttondata =
                    sresize(c->radio.buttondata, c->radio.nbuttons, intorptr);
                c->radio.buttondata[c->radio.nbuttons-1] = I(PROT_SERIAL);
                if (c->radio.shortcuts) {
                    c->radio.shortcuts =
                        sresize(c->radio.shortcuts, c->radio.nbuttons, char);
                    c->radio.shortcuts[c->radio.nbuttons-1] = 'r';
                }
            }
        }
    }

    /*
     * Entirely new Connection/Serial panel for serial port
     * configuration.
     */
    ctrl_settitle(b, "Connection/Serial",
                  "Options controlling local serial lines");

    if (!midsession) {
        /*
         * We don't permit switching to a different serial port in
         * midflight, although we do allow all other
         * reconfiguration.
         */
        s = ctrl_getset(b, "Connection/Serial", "serline",
                        "Select a serial line");
        ctrl_editbox(s, "Serial line to connect to", 'l', 40,
                     HELPCTX(serial_line),
                     conf_editbox_handler, I(CONF_serline), I(1));
    }

    s = ctrl_getset(b, "Connection/Serial", "sercfg", "Configure the serial line");
    ctrl_editbox(s, "Speed (baud)", 's', 40,
                 HELPCTX(serial_speed),
                 conf_editbox_handler, I(CONF_serspeed), I(-1));
    ctrl_editbox(s, "Data bits", 'b', 40,
                 HELPCTX(serial_databits),
                 conf_editbox_handler, I(CONF_serdatabits), I(-1));
    /*
     * Stop bits come in units of one half.
     */
    ctrl_editbox(s, "Stop bits", 't', 40,
                 HELPCTX(serial_stopbits),
                 conf_editbox_handler, I(CONF_serstopbits), I(-2));
    ctrl_droplist(s, "Parity", 'p', 40,
                  HELPCTX(serial_parity),
                  serial_parity_handler, I(parity_mask));
    ctrl_droplist(s, "Flow control", 'f', 40,
                  HELPCTX(serial_flow),
                  serial_flow_handler, I(flow_mask));
}