nhyatt/putty-source
1
0
Fork 0
mirror of https://git.tartarus.org/simon/putty.git synced 2025-01-09 17:38:00 +00:00
Code Issues Projects Releases Wiki Activity
23c64fa00e
putty-source/CMakeLists.txt

135 lines
3.2 KiB
CMake
Raw Normal View History

Compatibility with older versions of cmake. After this change, the cmake setup now works even on Debian stretch (oldoldstable), which runs cmake 3.7. In order to support a version that early I had to: - write a fallback implementation of 'add_compile_definitions' for older cmakes, which is easy, because add_compile_definitions(FOO) is basically just add_compile_options(-DFOO) - stop using list(TRANSFORM) and string(JOIN), of which I had one case each, and they were easily replaced with simple foreach loops - stop putting OBJECT libraries in the target_link_libraries command for executable targets, in favour of adding $<TARGET_OBJECTS:foo> to the main sources list for the same target. That matches what I do with library targets, so it's probably more sensible anyway. I tried going back by another Debian release and getting this cmake setup to work on jessie, but that runs CMake 3.0.1, and in _that_ version of cmake the target_sources command is missing, and I didn't find any alternative way to add extra sources to a target after having first declared it. Reorganising to cope with _that_ omission would be too much upheaval without a very good reason.
2021-10-29 17:08:18 +00:00
cmake_minimum_required(VERSION 3.7)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
project(putty LANGUAGES C)
include(cmake/setup.cmake)
Add the man pages to the 'make install' target. doc/CMakeLists.txt now sets a variable indicating that we either have, or can build, each individual man page. And when we call our installed_program() function to mark a program as official enough to put in 'make install', that function also installs the man page similarly if it exists, and warns if not. For the convenience of people building-and-installing from the .tar.gz we ship, I've arranged that they can still get the man pages installed without needing Halibut: the previous commit ensured that the prebuilt man pages are still in the tarball, and this one arranges that if we don't have Halibut but we do have prebuilt man pages, then we can 'build' them by copying from the prebuilt versions.
2021-05-03 15:25:21 +00:00
# Scan the docs directory first, so that when we start calling
# installed_program(), we'll know if we have man pages available
Integrate the 'doc' subdir into the CMake system. The standalone separate doc/Makefile is gone, replaced by a CMakeLists.txt that makes 'doc' function as a subdirectory of the main CMake build system. This auto-detects Halibut, and if it's present, uses it to build the man pages and the various forms of the main manual, including the Windows CHM help file in particular. One awkward thing I had to do was to move just one config directive in blurb.but into its own file: the one that cites a relative path to the stylesheet file to put into the CHM. CMake builds often like to be out-of-tree, so there's no longer a fixed relative path between the build directory and chm.css. And Halibut has no concept of an include path to search for files cited by other files, so I can't fix that with an -I option on the Halibut command line. So I moved that single config directive into its own file, and had CMake write out a custom version of that file in the build directory citing the right path. (Perhaps in the longer term I should fix that omission in Halibut; out-of-tree friendliness seems like a useful feature. But even if I do, I still need this build to work now.)
2021-05-02 14:34:57 +00:00
add_subdirectory(doc)
Make cmake.h available everywhere. The definition of HAVE_CMAKE_H is now at the very top of the main CMakeLists.txt, so that it applies to all objects. And the consequent include of cmake.h is at the very top of defs.h, so that it should be included first by everything. This way, I don't have to worry any more that the HAVE_FOO definitions in cmake.h might accidentally have failed to reach some part of the code.
2021-04-19 05:40:01 +00:00
add_compile_definitions(HAVE_CMAKE_H)
Start a 'terminal' source subdirectory. This contains terminal.c, bidi.c (formerly minibidi.c), and terminal.h. I'm about to make a couple more bidi-related source files, so it seems worth starting by making a place to put them that won't be cluttering up the top level.
2021-10-10 13:30:37 +00:00
include_directories(terminal)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_library(utils STATIC
${GENERATED_COMMIT_C})
Add missing dependencies on generated source files. The utils library shouldn't be built until cmake_commit.c exists, and similarly with the charset library and sbcsdat.c.
2021-04-18 16:01:50 +00:00
add_dependencies(utils cmake_commit_c)
Move utils filename list into its own subdir. Now there's a utils/CMakeLists.txt, which contains the huge list of source files in that directory, so that the top-level file does a better job of showing the overview.
2021-04-18 12:38:50 +00:00
add_subdirectory(utils)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_library(logging OBJECT
logging.c)
add_library(eventloop STATIC
callback.c timing.c)
add_library(console STATIC
clicons.c console.c)
add_library(settings STATIC
cmdline.c settings.c)
add_library(crypto STATIC
Move proxy-related source files into a subdirectory. There are quite a few of them already, and I'm about to make another one, so let's start with a bit of tidying up. The CMake build organisation is unchanged: I haven't put the proxy object files into a separate library, just moved the locations of the source files. (Organising proxying as a library would be tricky anyway, because of the various overrides for tools that want to avoid cryptography.)
2021-10-30 10:02:28 +00:00
proxy/cproxy.c proxy/sshproxy.c)
Move crypto into its own subdirectory. Similarly to 'utils', I've moved all the stuff in the crypto build-time library into a source directory of its own, and while I'm at it, split up the monolithic sshauxcrypt.c into its various unrelated parts. This is also an opportunity to remove the annoying 'ssh' prefix from the front of the file names, and give several of them less cryptic names.
2021-04-18 12:16:59 +00:00
add_subdirectory(crypto)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_library(network STATIC
Framework for announcing which Interactor is talking. All this Interactor business has been gradually working towards being able to inform the user _which_ network connection is currently presenting them with a password prompt (or whatever), in situations where more than one of them might be, such as an SSH connection being used as a proxy for another SSH connection when neither one has one-touch login configured. At some point, we have to arrange that any attempt to do a user interaction during connection setup - be it a password prompt, a host key confirmation dialog, or just displaying an SSH login banner - makes it clear which host it's come from. That's going to mean calling some kind of announcement function before doing any of those things. But there are several of those functions in the Seat API, and calls to them are scattered far and wide across the SSH backend. (And not even just there - the Rlogin backend also uses seat_get_userpass_input). How can we possibly make sure we don't forget a vital call site on some obscure little-tested code path, and leave the user confused in just that one case which nobody might notice for years? Today I thought of a trick to solve that problem. We can use the C type system to enforce it for us! The plan is: we invent a new struct type which contains nothing but a 'Seat *'. Then, for every Seat method which does a thing that ought to be clearly identified as relating to a particular Interactor, we adjust the API for that function to take the new struct type where it previously took a plain 'Seat *'. Or rather - doing less violence to the existing code - we only need to adjust the API of the dispatch functions inline in putty.h. How does that help? Because the way you _get_ one of these struct-wrapped Seat pointers is by calling interactor_announce() on your Interactor, which will in turn call interactor_get_seat(), and wrap the returned pointer into one of these structs. The effect is that whenever the SSH (or Rlogin) code wants to call one of those particular Seat methods, it _has_ to call interactor_announce() just beforehand, which (once I finish all of this) will make sure the user is aware of who is presenting the prompt or banner or whatever. And you can't forget to call it, because if you don't call it, then you just don't have a struct of the right type to give to the Seat method you wanted to call! (Of course, there's nothing stopping code from _deliberately_ taking a Seat * it already has and wrapping it into the new struct. In fact SshProxy has to do that, in order to forward these requests up the chain of Seats. But the point is that you can't do it _by accident_, just by forgetting to make a vital function call - when you do that, you _know_ you're doing it on purpose.) No functional change: the new interactor_announce() function exists, and the type-system trick ensures it's called in all the right places, but it doesn't actually _do_ anything yet.
2021-10-30 17:05:36 +00:00
be_misc.c nullplug.c errsock.c logging.c x11disp.c
proxy/proxy.c proxy/interactor.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_library(keygen STATIC
import.c)
Move key-generation code into its own subdir. Including mpunsafe.{h,c}, which should be an extra defence against inadvertently using it outside the keygen library.
2021-04-22 16:59:16 +00:00
add_subdirectory(keygen)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_library(agent STATIC
sshpubk.c pageant.c aqsync.c)
add_library(guiterminal STATIC
Start a 'terminal' source subdirectory. This contains terminal.c, bidi.c (formerly minibidi.c), and terminal.h. I'm about to make a couple more bidi-related source files, so it seems worth starting by making a place to put them that won't be cluttering up the top level.
2021-10-10 13:30:37 +00:00
terminal/terminal.c terminal/bidi.c
ldisc.c config.c dialog.c
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
$<TARGET_OBJECTS:logging>)
add_library(noterminal STATIC
noterm.c ldisc.c)
add_library(all-backends OBJECT
pinger.c)
add_library(sftpclient STATIC
Move the SSH implementation into its own subdirectory. This clears up another large pile of clutter at the top level, and in the process, allows me to rename source files to things that don't all have that annoying 'ssh' prefix at the top.
2021-04-22 16:58:40 +00:00
psftpcommon.c)
add_subdirectory(ssh)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_library(otherbackends STATIC
$<TARGET_OBJECTS:all-backends>
$<TARGET_OBJECTS:logging>)
Move other backends into a subdirectory. This is the last of the subdirectory creations I had planned. This one is almost too footling to bother with (it hardly declutters the top level very much). One useful side effect is that I've included testback.c (containing the null and loopback backends) in the otherbackends library, which means it will now actually be _compiled_ even when nothing's using it, and we'll spot bit-rot promptly when internal APIs change. (And, to prove the point, I've immediately had to fix some bit-rot.)
2021-04-22 17:17:35 +00:00
add_subdirectory(otherbackends)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_executable(testcrypt
Move the SSH implementation into its own subdirectory. This clears up another large pile of clutter at the top level, and in the process, allows me to rename source files to things that don't all have that annoying 'ssh' prefix at the top.
2021-04-22 16:58:40 +00:00
testcrypt.c sshpubk.c ssh/crc-attack-detector.c)
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
target_link_libraries(testcrypt
keygen crypto utils ${platform_libraries})
Build various unit-test main() programs in utils. I found these while going through the code, and decided if we're going to have them then we should compile them. They didn't all compile first time, proving my point :-) I've enhanced the tree234 test so that it has a verbose option, which by default is off.
2021-04-17 15:39:31 +00:00
add_executable(test_host_strfoo
utils/host_strchr_internal.c)
target_compile_definitions(test_host_strfoo PRIVATE TEST)
target_link_libraries(test_host_strfoo utils ${platform_libraries})
add_executable(test_tree234
utils/tree234.c)
target_compile_definitions(test_tree234 PRIVATE TEST)
target_link_libraries(test_tree234 utils ${platform_libraries})
add_executable(test_wildcard
utils/wildcard.c)
target_compile_definitions(test_wildcard PRIVATE TEST)
target_link_libraries(test_wildcard utils ${platform_libraries})
Move bidi gettype main() into its own file. That's what I've usually been doing with any main()s I find under ifdef; there's no reason this should be an exception. If we're keeping it in the code at all, we should ensure it carries on compiling. I've also created a new header file bidi.h, containing pieces of the bidi definitions shared between bidi.c and the new source file.
2021-10-10 13:31:04 +00:00
add_executable(bidi_gettype
terminal/bidi_gettype.c)
target_link_libraries(bidi_gettype guiterminal utils ${platform_libraries})
Test rig for the new bidi algorithm. This standalone CLI program runs the UCD bidi tests in the form provided in Unicode 14.0.0. You can run it by just saying bidi_test --class BidiTest.txt --char BidiCharacterTest.txt assuming those two UCD files are in the current directory.
2021-10-10 13:52:17 +00:00
add_executable(bidi_test
terminal/bidi_test.c)
target_link_libraries(bidi_test guiterminal utils ${platform_libraries})
Move some add_executable() calls to top-level CMakeLists. Now that the main source file of Plink in each platform directory has the same name, we can put centralise the main definition of the program in the main CMakeLists.txt, and in the platform directory, just add the few extra modules needed to clear up platform-specific details. The same goes for psocks. And PSCP and PSFTP could have been moved to the top level already - I just hadn't done it in the initial setup.
2021-04-23 05:46:02 +00:00
add_executable(plink
${platform}/plink.c
be_all_s.c)
target_link_libraries(plink
eventloop noterminal console sshclient otherbackends settings network crypto
utils
${platform_libraries})
installed_program(plink)
add_executable(pscp
pscp.c
be_ssh.c)
target_link_libraries(pscp
sftpclient eventloop console sshclient settings network crypto utils
${platform_libraries})
installed_program(pscp)
add_executable(psftp
psftp.c
be_ssh.c)
target_link_libraries(psftp
sftpclient eventloop console sshclient settings network crypto utils
${platform_libraries})
installed_program(psftp)
add_executable(psocks
${platform}/psocks.c
psocks.c
norand.c
Move proxy-related source files into a subdirectory. There are quite a few of them already, and I'm about to make another one, so let's start with a bit of tidying up. The CMake build organisation is unchanged: I haven't put the proxy object files into a separate library, just moved the locations of the source files. (Organising proxying as a library would be tricky anyway, because of the various overrides for tools that want to avoid cryptography.)
2021-10-30 10:02:28 +00:00
proxy/nocproxy.c
proxy/nosshproxy.c
Move some add_executable() calls to top-level CMakeLists. Now that the main source file of Plink in each platform directory has the same name, we can put centralise the main definition of the program in the main CMakeLists.txt, and in the platform directory, just add the few extra modules needed to clear up platform-specific details. The same goes for psocks. And PSCP and PSFTP could have been moved to the top level already - I just hadn't done it in the initial setup.
2021-04-23 05:46:02 +00:00
ssh/portfwd.c)
target_link_libraries(psocks
eventloop console network utils
${platform_libraries})
foreach(subdir ${platform} ${extra_dirs})
Replace mkfiles.pl with a CMake build system. This brings various concrete advantages over the previous system: - consistent support for out-of-tree builds on all platforms - more thorough support for Visual Studio IDE project files - support for Ninja-based builds, which is particularly useful on Windows where the alternative nmake has no parallel option - a really simple set of build instructions that work the same way on all the major platforms (look how much shorter README is!) - better decoupling of the project configuration from the toolchain configuration, so that my Windows cross-building doesn't need (much) special treatment in CMakeLists.txt - configure-time tests on Windows as well as Linux, so that a lot of ad-hoc #ifdefs second-guessing a particular feature's presence from the compiler version can now be replaced by tests of the feature itself Also some longer-term software-engineering advantages: - other people have actually heard of CMake, so they'll be able to produce patches to the new build setup more easily - unlike the old mkfiles.pl, CMake is not my personal problem to maintain - most importantly, mkfiles.pl was just a horrible pile of unmaintainable cruft, which even I found it painful to make changes to or to use, and desperately needed throwing in the bin. I've already thrown away all the variants of it I had in other projects of mine, and was only delaying this one so we could make the 0.75 release branch first. This change comes with a noticeable build-level restructuring. The previous Recipe worked by compiling every object file exactly once, and then making each executable by linking a precisely specified subset of the same object files. But in CMake, that's not the natural way to work - if you write the obvious command that puts the same source file into two executable targets, CMake generates a makefile that compiles it once per target. That can be an advantage, because it gives you the freedom to compile it differently in each case (e.g. with a #define telling it which program it's part of). But in a project that has many executable targets and had carefully contrived to _never_ need to build any module more than once, all it does is bloat the build time pointlessly! To avoid slowing down the build by a large factor, I've put most of the modules of the code base into a collection of static libraries organised vaguely thematically (SSH, other backends, crypto, network, ...). That means all those modules can still be compiled just once each, because once each library is built it's reused unchanged for all the executable targets. One upside of this library-based structure is that now I don't have to manually specify exactly which objects go into which programs any more - it's enough to specify which libraries are needed, and the linker will figure out the fine detail automatically. So there's less maintenance to do in CMakeLists.txt when the source code changes. But that reorganisation also adds fragility, because of the trad Unix linker semantics of walking along the library list once each, so that cyclic references between your libraries will provoke link errors. The current setup builds successfully, but I suspect it only just manages it. (In particular, I've found that MinGW is the most finicky on this score of the Windows compilers I've tried building with. So I've included a MinGW test build in the new-look Buildscr, because otherwise I think there'd be a significant risk of introducing MinGW-only build failures due to library search order, which wasn't a risk in the previous library-free build organisation.) In the longer term I hope to be able to reduce the risk of that, via gradual reorganisation (in particular, breaking up too-monolithic modules, to reduce the risk of knock-on references when you included a module for function A and it also contains function B with an unsatisfied dependency you didn't really need). Ideally I want to reach a state in which the libraries all have sensibly described purposes, a clearly documented (partial) order in which they're permitted to depend on each other, and a specification of what stubs you have to put where if you're leaving one of them out (e.g. nocrypto) and what callbacks you have to define in your non-library objects to satisfy dependencies from things low in the stack (e.g. out_of_memory()). One thing that's gone completely missing in this migration, unfortunately, is the unfinished MacOS port linked against Quartz GTK. That's because it turned out that I can't currently build it myself, on my own Mac: my previous installation of GTK had bit-rotted as a side effect of an Xcode upgrade, and I haven't yet been able to persuade jhbuild to make me a new one. So I can't even build the MacOS port with the _old_ makefiles, and hence, I have no way of checking that the new ones also work. I hope to bring that port back to life at some point, but I don't want it to block the rest of this change.
2021-04-10 14:21:11 +00:00
add_subdirectory(${subdir})
endforeach()
configure_file(cmake/cmake.h.in ${GENERATED_SOURCES_DIR}/cmake.h)
Reference in New Issue Copy Permalink