connection, and replace it with sensible dynamically allocated
storage. While I'm at it, get rid of the disgusting dual use between
storing an actual hostname and storing an incoming SOCKS request; we
now have a separate pointer variable for each.
[originally from svn r9903]
subsidiary network modules like portfwd.c. To be called when the
subsidiary module experiences a socket error: it sends an emergency
CHANNEL_CLOSE (not just outgoing CHANNEL_EOF), and immediately deletes
the local side of the channel. (I've invented a new channel type in
ssh.c called CHAN_ZOMBIE, for channels whose original local side has
already been thrown away and they're just hanging around waiting to
receive the acknowledging CHANNEL_CLOSE.)
As a result of this and the last few commits, I can now run a port
forwarding session in which a local socket error occurs on a forwarded
port, and PuTTY now handles it apparently correctly, closing both the
SSH channel and the local socket and then actually recognising that
it's OK to terminate when all _other_ channels have been closed.
Previously the channel corresponding to the duff connection would
linger around (because of net_pending_errors never being called), and
keep being selected on (hence chewing CPU), and inhibit program
termination at the end of the session (because not all channels were
closed).
[originally from svn r9364]
data channels. Should comprehensively fix 'half-closed', in principle,
though it's a big and complicated change and so there's a good chance
I've made at least one mistake somewhere.
All connections should now be rigorous about propagating end-of-file
(or end-of-data-stream, or socket shutdown, or whatever) independently
in both directions, except in frontends with no mechanism for sending
explicit EOF (e.g. interactive terminal windows) or backends which are
basically always used for interactive sessions so it's unlikely that
an application would be depending on independent EOF (telnet, rlogin).
EOF should now never accidentally be sent while there's still buffered
data to go out before it. (May help fix 'portfwd-corrupt', and also I
noticed recently that the ssh main session channel can accidentally
have MSG_EOF sent before the output bufchain is clear, leading to
embarrassment when it subsequently does send the output).
[originally from svn r9279]
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
local socket _before_ calling the SSH setup functions. This makes no
difference to ssh.c itself, but it makes portfwd.c easier to reuse
for other purposes (e.g. as a component of a standalone SOCKS
server), because now ssh_send_port_open() can itself call
pfd_confirm() without the freeze and unfreeze happening in the wrong
order.
[originally from svn r8500]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
Change Settings, the port forwarding setup function is run again,
and tags all existing port forwardings as `do not keep'. Then it
iterates through the config in the normal way; when it encounters a
port forwarding which is already in the tree, it tags it `keep'
rather than setting it up from scratch. Finally, it goes through the
tree and removes any that haven't been labelled `keep'. Hence,
editing the list of forwardings in Change Settings has the effect of
cancelling any forwardings you remove, and adding any new ones.
The SSH panel now appears in the reconfig box, and is empty apart
from a message explaining that it has to be there for subpanels of
it to exist. Better wording for this message would be welcome.
[originally from svn r5030]
No very good reason, but I've occasionally wanted to frob it to see if it
makes any difference to problems I'm having, and it was easy.
Tested that it does actually cause keepalives on Windows (with tcpdump);
should also work on Unix. Not implemented on Mac (does nothing), but then
neither is TCP_NODELAY.
Quite a big checkin, much of which is adding `keepalive' alongside `nodelay'
in network function calls.
[originally from svn r4309]
Also fix what I think are a couple of very minor bugs in SOCKS4; one won't
affect anyone AFAIK, and the other is unlikely to cause trouble.
[originally from svn r3497]
BND.{ADDR,PORT}. Besides being clearly wrong, correspondence with
Sascha Schwarz suggests that this can confuse some SOCKS5 clients
(Aventail and sockscap32) which seem to assume that the reply must
have ATYP=1 (IPv4 literal) and so get the length wrong.
Now all replies have ATYP=1 with BND.{ADDR,PORT} = 0.0.0.0:0 -- this
apparently follows practice in OpenSSH. (We don't have enough info to
fill these fields in correctly.)
[originally from svn r3496]
sk_new() on invocation; these functions become responsible for (eventually)
freeing it. The caller must not do anything with 'addr' after it's been passed
in. (Ick.)
Why:
A SOCKS5 crash appears to have been caused by overzealous freeing of
a SockAddr (ssh.c:1.257 [r2492]), which for proxied connections is
squirreled away long-term (and this can't easily be avoided).
It would have been nice to make a copy of the SockAddr, in case the caller has
a use for it, but one of the implementations (uxnet.c) hides a "struct
addrinfo" in there, and we have no defined way to duplicate those. (None of the
current callers _do_ have a further use for the SockAddr.)
As far as I can tell, everything _except_ proxying only needs addr for the
duration of the call, so sk_addr_free()s immediately. If I'm mistaken, it
should at least be easier to find the offending free()...
[originally from svn r3383]
[r2492 == bdd6633970]
ptrs and ints of different size and -Werror makes this serious).
The GTK bits are done by Colin's patch to use GINT_TO_POINTER
(thanks); the uxnet bits are done by cleaning up the rest of the
code. In particular, network.h now typedefs `OSSocket' to be a type
capable of holding whatever the OS's socket data type is that
underlies our socket abstraction. Individual platforms can make this
typedef themselves if they define OSSOCKET_DEFINED to prevent
network.h redoing it; so the Unix OSSocket is now int. Default is
still void *, so other platforms should be unaffected.
[originally from svn r3171]
supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS
5 isn't supported, but it'll be no difficulty once I actually get
round to it). Thanks to Chas Honton for his `stone soup' patch: I
didn't end up actually using any of his code, but it galvanised me
into doing it properly myself :-)
[originally from svn r3055]
malloc functions, which automatically cast to the same type they're
allocating the size of. Should prevent any future errors involving
mallocing the size of the wrong structure type, and will also make
life easier if we ever need to turn the PuTTY core code from real C
into C++-friendly C. I haven't touched the Mac frontend in this
checkin because I couldn't compile or test it.
[originally from svn r3014]
holdout static I hadn't noticed; unicode.c had one too; and a large
number of statics that were perfectly OK due to being constants have
been made `const', with assorted `const' repercussions all over the
place. I now declare `remove-statics' to be fixed.
[originally from svn r2594]
proxy-indirection network functions (name_lookup, new_connection,
new_listener) takes a `const Config *' as an argument, and extracts
enough information from it before returning to handle that
particular network operation in accordance with the proxy settings
it specifies. This involved {win,ux}net.c due to a `const'
repercussion.
[originally from svn r2567]
SockAddr, which just contains an unresolved hostname and is created
by a stub function in *net.c. It's an error to pass this to most of
the real-meat functions in *net.c; these fake addresses should have
been dealt with by the time they get down that far. proxy.c now
contains name_lookup(), a wrapper on sk_namelookup() which decides
whether or not to do real DNS, and the individual proxy
implementations each deal sensibly with being handed an unresolved
address and avoid ever passing one down to *net.c.
[originally from svn r2353]
well, though it's a lot less useful since you still can't bind to
low-numbered ports of odd loopback IPs. Should work in principle for
SSH2 remote forwardings as well as local ones, but OpenSSH seems
unwilling to cooperate.
[originally from svn r2344]
source files in which it's no longer required (it was previously
required in anything that included <putty.h>, but not any more).
Also moved a couple of stray bits of exposed WinSock back into
winnet.c (getservbyname from ssh.c and AF_INET from proxy.c).
[originally from svn r2160]
As a result I've now been able to turn the global variables `back'
and `backhandle' into module-level statics in the individual front
ends. Now _that's_ progress!
[originally from svn r2142]
each backend now stores all its internal variables in a big struct,
and each backend function gets a pointer to this struct passed to
it. This still isn't the end of the work - lots of subsidiary things
still use globals, notably all the cipher and compressor modules and
the X11 forwarding authentication stuff. But ssh.c itself has now
been transformed, and that was the really painful bit, so from here
on it all ought to be a sequence of much smaller and simpler pieces
of work.
[originally from svn r2127]
CONNECT, but contains an extensible framework to allow other
proxies. Apparently SOCKS and ad-hoc-telnet-proxy are already
planned (the GUI mentions them already even though they don't work
yet). GUI includes full configurability and allows definition of
exclusion zones. Rock and roll.
[originally from svn r1598]
done properly (by binding to INADDR_LOOPBACK) instead of hackishly
(by binding to INADDR_ANY, looking at the peer address when a
connection is accepted, and slamming the connection shut at that
point).
[originally from svn r1215]
by ceasing to listen on input channels if the corresponding output
channel isn't accepting data. Has had basic check-I-didn't-actually-
break-anything-too-badly testing, but hasn't been genuinely tested
in stress conditions (because concocting stress conditions is non-
trivial).
[originally from svn r1198]
