opaque to all platform-independent modules and only handled within
per-platform code. `Filename' is there because the Mac has a magic
way to store filenames (though currently this checkin doesn't
support it!); `FontSpec' is there so that all the auxiliary stuff
such as font height and charset and so on which is needed under
Windows but not Unix can be kept where it belongs, and so that I can
have a hope in hell of dealing with a font chooser in the forthcoming
cross-platform config box code, and best of all it gets the horrid
font height wart out of settings.c and into the Windows code where
it should be.
The Mac part of this checkin is a bunch of random guesses which will
probably not quite compile, but which look roughly right to me.
Sorry if I screwed it up, Ben :-)
[originally from svn r2765]
combining adjacent ones for the same region, and runs them all in do_paint.
I'm not sure it's entirely right, but it works on my Mac in every case I've
tested.
[originally from svn r2763]
foreground colours, and ESC[100m through ESC[107m to set bright
background colours. Hence, so do we. Bright-foreground is
distinguishable from bold, and bright-background distinguishable
from blink, when it leaves terminal.c; the front end may then choose
to display them in the same way if it's configured to do so. This
change makes the xterm backend for Turbo Vision (!!!) work properly.
Untested on Mac.
[originally from svn r2734]
Everything in there which is integral is now an actual int, which
means my forthcoming revamp of the config box will be able to work
with `int *' pointers without fear of doom.
[originally from svn r2733]
yet -- there's no Alt+keypad support, and no way for the front-end to find
out what it should do with the Num Lock light. It's also not fully tested.
Nonetheless, it's at least as good as the previous Mac keyboard handler.
Other platforms probably shouldn't adopt it just yet.
[originally from svn r2728]
both the raw and the cooked mouse button, with the mapping being done in
advance by the front-end. This is useful because it allows the front-end to
use information other than the raw button (e.g. the modifier state) to decide
which cooked button to generate.
.
Front ends other than the Mac one are untested, but they just call
translate_button() themselves and pass the result to term_mouse().
[originally from svn r2721]
areas of the code. Not all back-ends have been tested, but Telnet and SSH
behave reasonably.
Incidentally, almost all of this patch was written through Mac PuTTY,
admittedly over a Telnet connection.
[originally from svn r2615]
link-module const variable `be_default_protocol' which suggests a sensible
default to the front end (which can ignore it). (DEFAULT_PORT is replaced by a
lookup in the backend[] table.)
Still not pretty, but it does mean that the recent fix for `ssh-default'
doesn't break PuTTYtel.
[originally from svn r2613]
holdout static I hadn't noticed; unicode.c had one too; and a large
number of statics that were perfectly OK due to being constants have
been made `const', with assorted `const' repercussions all over the
place. I now declare `remove-statics' to be fixed.
[originally from svn r2594]
just done this the very simple way - bundle all the globals into a
data structure and pass pointers around. One particularly ugly wart
is that wc_to_mb now takes a pointer to this structure as an
argument (optional, may be NULL, and unused in any Unicode layer
that's even marginally less of a mess than the Windows one). I do
need to do this properly at some point, but for now this should just
about be adequate. As usual, the Mac port has not been updated.
[originally from svn r2592]
completely from putty.h. It's now static in each of the command-line
front ends, shared only between window.c and windlg.c in PuTTY
proper (I've tested this by doing #define cfg cfgsillyname in those
two files only, and it still links so nobody else is using that
symbol!), and part of the `inst' structure in pterm. I think that
only leaves the Unicode module as the last stubborn holdout in the
anti-global-variables campaign.
[originally from svn r2568]
and have a function to pass in a new one. (Well, actually several
back ends don't actually bother to do this because they need nothing
out of Config after the initial setup phase, but they could if they
wanted to.)
[originally from svn r2561]
and term_reconfig() now passes in a new structure which is copied
over the top. This means that the old and new structures can be
compared, and the _current_ as well as default states of auto wrap
mode, DEC origin mode, BCE, blinking text and character classes can
be conveniently reconfigured in mid-session without requiring a
terminal reset.
[originally from svn r2557]
the remote IP/port data provided by the server for forwarded
connections. Disabled by default, since it's incompatible with SSH2,
probably incompatible with some X clients, and tickles a bug in
at least one version of OpenSSH.
[originally from svn r2554]
we're going to be a security program, we can at least make a token
effort to use the most secure local X auth available! And I'm still
half-tempted to see if I can support it for remote X servers too...
[originally from svn r2537]
Windows and Mac backends have acquired auth-finding functions which
do nothing; Unix backend has acquired one which actually works, so
Plink can now do X forwarding believably.
(This checkin stretches into some unlikely parts of the code because
there have been one or two knock-on effects involving `const'. Bah.)
[originally from svn r2536]
and pterm need at least one default setting to be _different_ (pterm
needs the default term type to be `xterm', while plink needs it to
be taken from $TERM). So here's a completely new alternative
mechanism for platform- and app-specific default settings. Ben will
probably want to check the integrity of the Mac port, since I've
fiddled with it without testing that it still compiles.
[originally from svn r2513]
right-hand half of a CJK wide character; correct handling of cut and
paste when CJK text wraps between lines _irrespective of the parity
of the starting column_; correct handling of wordness values
irrespective of which half of a CJK character the user
double-clicked on; correct handling when any terminal activity
overwrites only one half of a CJK wide character. I think we now
behave marginally better than xterm in this respect (it has a redraw
problem when you overwrite the RH half of a CJK char), so I'm happy.
Also redefined the internal UCSWIDE marker to something in the
surrogate range, while I'm here, so that U+303F is available for use
by actual users.
[originally from svn r2426]
know what that encoding actually is, we can do our best to support
additional charsets (VT100 linedrawing, SCO ACS, UTF-8 mode) using
the available characters; if we don't, we fall back to a mode where
we disable all Unicode cut-and-paste and assume any Unicode
character is undisplayable.
[originally from svn r2413]
open an existing saved session. This has entailed adding an extra hook to
settings.c to allow for loading settings other than by name.
[originally from svn r2387]
SockAddr, which just contains an unresolved hostname and is created
by a stub function in *net.c. It's an error to pass this to most of
the real-meat functions in *net.c; these fake addresses should have
been dealt with by the time they get down that far. proxy.c now
contains name_lookup(), a wrapper on sk_namelookup() which decides
whether or not to do real DNS, and the individual proxy
implementations each deal sensibly with being handed an unresolved
address and avoid ever passing one down to *net.c.
[originally from svn r2353]
the benefit of X font names which are rather more verbose than
Windows. One day I want to replace all these fixed-size buffers with
sensible dynamically allocated stuff, but not today.
[originally from svn r2260]
This introduces a new front-end function, do_scroll(), which is expected to
scroll a part of the physical display and cause repaint events for any
areas that couldn't be scrolled (e.g. because they were hidden).
scroll_display() is a wrapper around this which also updates disptext to
match.
Currently, scroll_display is only used in response to user scrollback requests
(via term_scroll()), but extending scroll() to use it as well should be
easy.
All of this is conditional on the front end's defining OPTIMISE_SCROLL, since
only the Mac front end currently implements do_scroll().
[originally from svn r2242]
This doesn't include any mkfiles.pl glue, and is missing one or two other
fixes. The terminal emulator is kind of working, though, as, I believe, is
the store module. Everything else is yet to be done.
[originally from svn r2226]
absent, and also (I think) all the frontend request functions (such
as request_resize) take a context pointer, so that multiple windows
can be handled sensibly. I wouldn't swear to this, but I _think_
that only leaves the Unicode stuff as the last stubborn holdout.
[originally from svn r2147]
lpage_send out into the line discipline, making them _clients_ of
the Unicode layer rather than part of it. This means they can access
ldisc->term, which in turn means I've been able to remove the
temporary global variable `term'. We're slowly getting there.
[originally from svn r2143]
As a result I've now been able to turn the global variables `back'
and `backhandle' into module-level statics in the individual front
ends. Now _that's_ progress!
[originally from svn r2142]
each backend now stores all its internal variables in a big struct,
and each backend function gets a pointer to this struct passed to
it. This still isn't the end of the work - lots of subsidiary things
still use globals, notably all the cipher and compressor modules and
the X11 forwarding authentication stuff. But ssh.c itself has now
been transformed, and that was the really painful bit, so from here
on it all ought to be a sequence of much smaller and simpler pieces
of work.
[originally from svn r2127]
terminal.c was apparently relying on implicit initialisation to
zero, and also I've removed the backends' dependency on terminal.h
by having terminal sizes explicitly passed in to back->size().
[originally from svn r2117]
all the global and function-static variables out of terminal.c into
a dynamically allocated data structure. Note that this does not yet
confer the ability to run more than one of them in the same process,
because other things (the line discipline, the back end) are still
global, and also in particular the address of the dynamically
allocated terminal-data structure is held in a global variable
`term'. But what I've got here represents a reasonable stopping
point at which to check things in. In _theory_ this should all still
work happily, on both Unix and Windows. In practice, who knows?
[originally from svn r2115]
it's automatically deactivated by any keypress, so that command-line
beeps from (e.g.) filename completion don't suddenly stop occurring,
but it still provides a rapid response to an accidental spewing of a
binary to your terminal.
[originally from svn r2107]
login shell or not. Also moved these new pieces of configuration
into the Config structure, though they won't stay there forever
since they will need to be moved out into platform-dependent config.
[originally from svn r2060]
The current pty.c backend is temporarily a loopback device for
terminal emulator testing, the display handling is only just enough
to show that terminal.c is functioning, the keyboard handling is
laughable, and most features are absent. Next step: bring output and
input up to a plausibly working state, and put a real pty on the
back to create a vaguely usable prototype. Oh, and a scrollbar would
be nice too.
In _theory_ the Windows builds should still work fine after this...
[originally from svn r2010]
beginning of a Unix port. It's nowhere near done, and currently it
won't even compile on Unix. But this represents the start of the
process of separating out platform-specific code, and also contains
the mkfiles.pl changes required to support a Unix makefile and a
non-flat source tree.
[originally from svn r1993]
Bump username storage from 32 to 100 chars. Also replaced a couple of magic
numbers with sizeof in ssh.c.
I don't believe this is going to startle any of the protocols PuTTY talks.
[originally from svn r1952]
now be processed in cmdline.c, which is called from all utilities
(well, not Pageant or PuTTYgen). This should mean we get to
standardise almost all options across almost all tools. Also one
major change: `-load' is now the preferred option for loading a
saved session in PuTTY proper. `@session' still works but is
deprecated.
[originally from svn r1799]
CONNECT, but contains an extensible framework to allow other
proxies. Apparently SOCKS and ad-hoc-telnet-proxy are already
planned (the GUI mentions them already even though they don't work
yet). GUI includes full configurability and allows definition of
exclusion zones. Rock and roll.
[originally from svn r1598]
Specifically, we explicitly closesocket() all open sockets, which
appears to be necessary since otherwise Windows sends RST rather
than FIN. I'm _sure_ that's a Windows bug, but there we go.
[originally from svn r1574]
of scp.c, psftp.c and plink.c into it. Additionally, add `batch
mode', in which all the interactive prompts (bad host key, log file
exists, insecure cipher, password prompt) are disabled and safe
responses are assumed. (The idea being that if you run PSCP, for
example, in a cron job then you'd probably rather it failed and
exited instead of leaving the cron job wedged while it waits for
user input that will never arrive.)
[originally from svn r1525]
^M instead of the Telnet New Line code. Unix-type telnetds don't
care one way or the other; RDB claims some telnetds prefer Telnet
NL; and now someone has found one that can't deal with Telnet NL and
prefers ^M. Sigh.
[originally from svn r1520]
process. This is functional in SSH, and vestigial (just returns 0)
in the other three protocols. Plink's Windows exit code is now
determined by the remote process exit code, which should make it
more usable in scripting applications. Tested in both SSH1 and SSH2.
[originally from svn r1518]
connections from outside localhost' switch. Interestingly OpenSSH
3.0 appears to ignore this (though I know it works because ssh.com
3.0 gets it right, and the SSH packet dump agrees that I'm doing the
right thing).
[originally from svn r1496]
sick of recompiling to enable packet dumps. SSH packet dumping is
now provided as a logging option, and dumps to putty.log like all
the other logging options. While I'm at it I cleaned up the format
so that packet types are translated into strings for easy browsing.
POSSIBLE SIDE EFFECT: in the course of this work I had to re-enable
the SSH1 packet length checks which it turns out hadn't actually
been active for some time, so it's possible things might break as a
result. If need be I can always disable those checks for the 0.52
release and think about it more carefully later.
[originally from svn r1493]
configurable option so users can re-enable the feature _if_ they
know they have an SSH2 server that isn't going to get shirty about
it. Inspired by a spectacular increase in OpenSSH's shirtiness.
[originally from svn r1474]
uses to manipulate the window (minimise, maximise, front, back,
move, resize) and report things about the window (is it minimised or
maximised, how big is it, what's its title). Missing are ESC[4;X;Yt
(resize to a specified pixel size; our resize code doesn't like it)
and ESC[19;X;Yt (report size of _screen_ in _characters_, which it
isn't even obvious how to do when you've got a variable font size).
[originally from svn r1414]
you enable it text will paste into Word et al in the same font as
PuTTY itself is displaying in. In particular, this will be a fixed-
pitch font, so tables and `ls' and the like will naturally line up.
[originally from svn r1373]
wraparound, not referencing vbell_timeout if in_vbell==FALSE, that
sort of thing. I doubt it'll fix the reported problems with screen
vbells, since none of the failure modes I've just prevented looked
all that probable to me, but it's nice to have extra robustness
anyway.
[originally from svn r1314]
multi-monitor aware and make the scrollbar separately configurable
in and out of full-screen mode. Also (not Wez's patch, this bit) fix
the case where the user reconfigures _while_ the window is
full-screen, and disables full-screening. (In this case the window
should return gracefully to normal, rather than losing all its title
bars and getting confused.)
[originally from svn r1310]
rather than four. Should fix all sorts of bugs, since the fourth
(and default!) state was behaving weirdly and nobody liked it.
[originally from svn r1307]
term_out() can in turn call ldisc_send() which calls back to
from_backend() when local echo is enabled. This was giving rise to
crazy re-entrancy stuff and stack overflows. Instead from_backend()
deposits its data in a bufchain which term_out() empties the next
time it's called.
[originally from svn r1276]
kicked out by the Unicode patch. It's not very good - only works
sanely on US keyboards - but it's no worse than it was in 0.51.
After 0.52 maybe I should fix it properly.
[originally from svn r1273]
fiddle with the widths of characters in DBCS screen fonts, and (the
big one) one to enable a mode in which resizing the window locks the
terminal size and lets the font change, instead of vice versa. That
should shut up a few feature requests!
[originally from svn r1269]
mouse tracking is enabled. (This can be turned off if your app
really wants Shift+mouse, but it defaults to on for general
usefulness.)
[originally from svn r1235]
scp1 if it can't. Currently not very tested - I checked it in as
soon as it completed a successful recursive copy in both directions.
Also, one known bug: you can't specify a remote wildcard, because by
the nature of SFTP we'll need to implement the wildcard engine on
the client side. I do intend to do this (and use the same wildcard
engine in PSFTP as well) but I haven't got round to it yet.
[originally from svn r1208]
by me to make the drag list behaviour slightly more intuitive.
WARNING: DO NOT LOOK AT pl_itemfrompt() IF YOU ARE SQUEAMISH.
[originally from svn r1199]
by ceasing to listen on input channels if the corresponding output
channel isn't accepting data. Has had basic check-I-didn't-actually-
break-anything-too-badly testing, but hasn't been genuinely tested
in stress conditions (because concocting stress conditions is non-
trivial).
[originally from svn r1198]
box. Also default to ISO8859-1 so that CSI works in the default
mode; this is ridiculously Western-centric but I can't honestly
think of a better option.
[originally from svn r1183]
Only currently works on SSH1; SSH2 should be doable but it's late
and I have other things to do tonight. The Cool Guy award for this
one goes to Nicolas Barry, for doing most of the work and actually
understanding the code he was adding to.
[originally from svn r1176]
possible and we have a single unified means of trying to display any
Unicode code point. Instead of the various ad-hoc translation modes
we had before, we now have a single `codepage' option which allows
us to treat the incoming (and outgoing) text as any given character
set, and locally we map that to Unicode and back.
[originally from svn r1110]
send Telnet special sequences (Interrupt Process, Suspend, Erase
Char, End Of Line) instead of their ASCII equivalents. In particular
Return -> Telnet End Of Line is _always_ enabled irrespective of the
configuration, while the others are optional. Also in this patch, an
entertainingly ghastly use of `switch' to allow literal ^M^J to do
the same thing as magic-^M (the Return key) when in Raw protocol.
[originally from svn r1109]
configurable bell overload handling. Thanks to Robert de Bath for
galvanising me into doing this, but I've had to rip most of his code
out and redo it myself...
[originally from svn r1039]
always Compose (we have no better use for it), and Ctrl-Alt can be
made to act like AltGr (but it's never Compose even when AltGr is).
[originally from svn r1033]
now to translate them into poor man's characters (+--+ and |). We also
have an option to disable this (and map line drawing characters to the
corresponding ASCII code as before). Thanks to Robert de Bath.
[originally from svn r1029]
remote command from a local file. Advantage: you can have more than
one line in it, so you can remotely run what's effectively a small
script.
[originally from svn r1010]
introduce another layer of abstraction in SSH2 ciphers, such that a
single `logical cipher' (as desired by a user) can equate to more
than one `physical cipher'. This is because AES comes in several key
lengths (PuTTY will pick the highest supported by the remote end)
and several different SSH2-protocol-level names (aes*-cbc,
rijndael*-cbc, and an unofficial one rijndael-cbc@lysator.liu.se).
[originally from svn r967]
- wording change (required a patch to winctrls.c:radioline())
- `only on clean exit' is used when an old-style config says `yes',
on the grounds that it's more generally useful than `always' and
also we want to map the old default to the new default.
[originally from svn r928]
multiple switchable line disciplines, we now have a single unified
one which changes its behaviour based on option settings. Each
option setting can be suggested by the back end and/or the terminal
handler, and can be forcibly overridden by the configuration. Local
echo and local line editing are separate, independently switchable,
options.
[originally from svn r895]
smalloc() macros and thence to the safemalloc() functions in misc.c.
This should allow me to plug in a debugging allocator and track
memory leaks and segfaults and things.
[originally from svn r818]
disablement option into two options so the app cursor keys and app
keypad can be controlled separately. The Pedantic Software Award in
this case goes to the Midnight Commander for its egregious failure
to just use the terminal in Perfectly Normal mode.
[originally from svn r766]
advantages:
- protocol modules can call sk_write() without having to worry
about writes blocking, because blocking writes are handled in the
abstraction layer and retried later.
- `Lost connection while sending' is a thing of the past.
- <winsock.h> is no longer needed in most modules, because
"putty.h" doesn't have to declare `SOCKET' variables any more,
only the abstracted `Socket' type.
- select()-equivalent between multiple sockets will now be handled
sensibly, which opens the way for things like SSH port
forwarding.
[originally from svn r744]
- Robert de Bath's Compose key is now off by default and configurable on
- The ages-old controversy over whether ALT by itself should bring the
System menu up is now controllable by a config option
- You can now independently configure whether scrollback resets on a
keypress _and_ whether it resets on screen activity.
[originally from svn r741]
use when they have data from the network. Replaces the utterly daft
inbuf / inbuf_head / term_out() interface, which only made sense
when feeding to terminal.c. (terminal.c now implements
from_backend() as a small function that gateways to the old
interface.)
As a side effect, from_backend() also has an `is_stderr' parameter,
so scp can once again separate the server's pronouncements on stderr
from the actual protocol progress on stdout.
[originally from svn r729]
- cope with strange WinSock wrappers not supporting SIOCATMARK
- define yet more terminal compatibility modes
- support UK-ASCII (just like US-ASCII but # is a sterling sign)
- support connection keepalives at a configurable interval
[originally from svn r692]
windlg.c into it. Allows plink and pscp to no longer link with
windlg.c, meaning they lose some of the sillier stub functions and
also can provide a console-based form of verify_ssh_host_key().
[originally from svn r683]
