I've made the licence text, the About box, and the host key dialog
into GTK selectable edit controls. (The former because it contains a
lot of text; the About box because pasting version numbers into bug
reports is obviously useful; the host key because of the fingerprint.)
(cherry picked from commit 21101c7397)
Conflicts:
unix/gtkdlg.c
unix/unix.h
(cherry-picker's notes: not a trivial resolution, since I had to apply
the equivalent changes in the pre-GTK3-port version of the code)
Or, at least, potentially do so. The build script now has a slot into
which code-signing can be dropped by setting a variable in the bob
configuration to specify an appropriate command line.
The variable will typically need to point at a script wrapping the
actual signing tool, since there are lots of fiddly details
(timestamping countersignature, certificate, private key, etc) not
given on the command lines in this build script, on the basis that
they're local configuration questions for whoever is _running_ this
build script.
(cherry picked from commit d0e9630e1c)
logevent() doesn't do printf-style formatting (though the logeventf
wrapper in ssh.c does), so if you need to format a message, it has to
be done separately with dupprintf.
(cherry picked from commit 1659cf3f14)
By default Windows processes have wide open ACLs which allow interference
by other processes running as the same user. Adjust our ACL to make this
a bit harder.
Because it's useful to protect PuTTYtel as well, carve winsecur.c into
advapi functions and wincapi.c for crypt32 functions.
(cherry picked from commit 48db456801)
Conflicts:
Recipe
(cherry-picker's note: the conflict was just some context not looking
quite the same)
We set up a pair of bufchains for the standard input and output
exchanged with the proxy process, but forgot to clear them when the
Local_Proxy_Socket is cleaned up.
(cherry picked from commit bb66e9870e)
make_private_security_descriptor and a new function protectprocess().
protectprocess() opens the running PuTTY process and adjusts the
Everyone and user access control entries in its ACL to deny a
selection of permissions which malicious processes running as the same
user could use to hijack PuTTY.
(cherry picked from commit aba7234bc1)
Half the release checklist has changed recently, what with me
completely reworking the website and also writing all this release
automation. I think these are all the checklist changes needed now the
dust has settled, though of course when I do the next actual release I
expect there'll turn out to be something I missed...
(cherry picked from commit 3e811b3dff)
I've added extra modes to release.pl which should automate the more
tedious parts of the deployment phase: uploading the release build to
all the places it needs to go, checking its integrity once it gets
there, verifying that everything can be downloaded again usefully,
checking content-types etc.
The new version should check more thoroughly (it checks the whole FTP
and HTTP download directories, so it will spot errors like failing to
update the FTP 'latest' symlink), and take fewer commands to run.
(cherry picked from commit f08e2de078)
The length coming back from ber_read_id_len might have overflowed, so
treat it as potentially negative. Also, while I'm here, accumulate it
inside ber_read_id_len as an unsigned, so as to avoid undefined
behaviour on integer overflow, and toint() it before return.
Thanks to Hanno Böck for spotting this, with the aid of AFL.
(cherry picked from commit 5b7833cd47)
Conflicts:
import.c
(cherry-picker's note: resolving the conflict involved removing an
entire section of the original commit which fixed ECDSA code not
present on this branch)
Forgot that a zero-length string might have come back from fgets.
Thanks to Hanno Böck for spotting this, with the aid of AFL.
(cherry picked from commit 5815d6a65a)
The initial test for a line ending with "PRIVATE KEY-----" failed to
take into account the possibility that the line might be shorter than
that. Fixed by introducing a new library function strendswith(), and
strstartswith() for good measure, and using that.
Thanks to Hanno Böck for spotting this, with the aid of AFL.
(cherry picked from commit fa7b23ce90)
Conflicts:
misc.c
misc.h
(cherry-picker's note: the conflicts were only due to other functions
introduced on trunk just next to the ones introduced by this commit)
TOOLTYPE_NONNETWORK (i.e. pterm) already has "-log" (as does Unix
PuTTY), so there's no sense suppressing the synonym "-sessionlog".
Undocumented lacunae that remain:
plink accepts -sessionlog, but does nothing with it. Arguably it should.
puttytel accepts -sshlog/-sshrawlog (and happily logs e.g. Telnet
negotiation, as does PuTTY proper).
(cherry picked from commit a454399ec8)
Conflicts:
unix/uxplink.c
windows/winplink.c
(cherry-picker's notes: the conflict was only contextual, in the Plink
help output)
I've added a few sample shell commands in the upload procedure (mostly
so that I don't have to faff about remembering how rsync trailing
slashes work every time), and also written a script called
'release.pl', which automates the updating of the version number in
all the various places it needs to be done and also ensures the PSCP
and Plink transcripts in the docs will match the release itself.
(cherry picked from commit f3230c8545)
I spotted that I've been checking that old-style Windows Help files
were delivered with content-type "application/octet-stream", but not
also checking the same thing about the marginally newer .CHM ones. (Or
at least not writing it down in the wishlist; I think I did actually
check on at least one occasion.)
(cherry picked from commit 3552f37ba5)
Handles managed by winhandl.c have a 'busy' flag, which is used to
mean two things: (a) is a subthread currently blocked on this handle
so various operations in the main thread have to be deferred until it
finishes? And (b) is this handle currently one that should be returned
to the main loop to be waited for?
For HT_INPUT and HT_OUTPUT, those things are either both true or both
false, so a single flag covering both of them is fine. But HT_FOREIGN
handles have the property that they should always be waited for in the
main loop, but no subthread is blocked on them. The latter means that
operations done on them in the main thread should not be deferred; the
only such operation is cleaning them up in handle_free().
handle_free() was failing to spot this, and was deferring freeing
HT_FOREIGN handles until their subthread terminated - which of course
never happened. As a result, when a named pipe server was closed, its
actual Windows event object got destroyed, but winhandl.c still kept
passing it back to the main thread, leading to a tight loop because
MsgWaitForMultipleObjects would return ERROR_INVALID_HANDLE and never
block.
(cherry picked from commit 431f8db862)
The aim is to try to reduce the incidence of the two least helpful
classes of those reports: the ones which have just got mismatched
checksum files, and the ones which don't tell us the information that
would help.
(cherry picked from commit 8ff3b22243)
This is a minimal fix for CVE-2015-5309, and while it's probably
unnecessary now, it seems worth committing for defence in depth and to
give downstreams something reasonably non-intrusive to cherry-pick.
Parameters are now accumulated in unsigned integers and carefully checked
for overflow (which is turned into saturation). Things that consume them
now have explicit range checks (again, saturating) to ensure that their
inputs are sane. This should make it much harder to cause overflow by
supplying ludicrously large numbers.
Fixes two bugs found with the help of afl-fuzz. One of them may be
exploitable and is CVE-2015-5309.
The previous assertion failure is obviously wrong, but RFC 4253 doesn't
explicitly declare them to be a protocol error. Currently, the incoming
packet isn't logged, which might cause some confusion for log parsers.
Bug found with the help of afl-fuzz.
It's not used outside logfopen, and leaving an infalid file pointer
lying around in the log context caused a segfault if the user
cancelled logging.
Bug found by afl-fuzz before it had even started fuzzing.
On Windows, colons are illegal in filenames, because they're part of
the path syntax. But colons can appear in automatically constructed
log file names, if an IPv6 address is expanded from the &H placeholder.
Now we coerce any such illegal characters to '.', which is a bit of a
bodge but should at least cause a log file to be generated.
(cherry picked from commit 64ec5e03d5)
A user points out that logging fopen failures to the Event Log is a
bit obscure, and it's possible to proceed for months in the assumption
that your sessions are being correctly logged when in fact the
partition was full or you were aiming them at the wrong directory. Now
we produce output visibly in the PuTTY window.
(cherry picked from commit e162810516)
Log files, especially SSH packet logs, are often things you want to
generate in unusual circumstances, so it's good to have lots of ways
to ask for them. Particularly, it's especially painful to have to set
up a custom saved session to get diagnostics out of the command-line
tools.
I've added options '-sessionlog', '-sshlog' and '-sshrawlog', each of
which takes a filename argument. I think the fourth option (session
output but filtered down to the printable subset) is not really a
_debugging_ log in the same sense, so it's not as critical to have an
option for it.
(cherry picked from commit 13edf90e0a)
Plink sets standard input into nonblocking mode, meaning that read()
from fd 0 in an interactive context will typically return -1 EAGAIN.
But the prompt functions in uxcons.c, used for verifying SSH host keys
and suchlike, were doing an unguarded read() from fd 0, and then
panicking and aborting the session when they got EAGAIN.
Fixed by inventing a wrapper around read(2) which handles EAGAIN but
passes all other errors back to the caller. (Seemed slightly less
dangerous than the stateful alternative of temporarily re-blockifying
the file descriptor.)
(cherry picked from commit bea758a7ae)
Conflicts:
unix/uxcons.c
Cherry-picker's notes: the conflict was a trivial one. The new
function block_and_read() by this commit appears just before
verify_ssh_host_key(), which has a new prototype on the source branch,
close enough to disrupt the patch hunk's context. Easily fixed.
The build script generates the .htaccess files that go in each
individual build and redirect generic names like 'putty.tar.gz' to the
real filenames including that build's version number. Those .htaccess
files redirect the corresponding signatures as well, so they need
updating now that we're generating signature files with a different
extension.
(cherry picked from commit 6744387924)
What should have been links to the old DSA keys were actually a second
copy of the links to the old RSA ones. Ahem.
(cherry picked from commit b62af0f40a)
For the moment we're also retaining the old ones. Not sure when will
be the best time to get rid of those; after the next release, perhaps?
(cherry picked from commit e88b8d21f2)
sign.sh's command-line syntax has changed, so I've updated the sample
command line in CHECKLST as well. Also the file extensions of the
signatures have changed, so I've updated the pre-release verification
command line in CHECKLST too.
(cherry picked from commit 11eb75a260)
This gives pride of place to the new set of keys we've recently
generated, and relegates the old ones to an afterthought.
(cherry picked from commit bb68baf53b)
In a UTF-8 pterm, it makes sense to set the IUTF8 flag (on systems
that have one) on the pty device, so that line editing will take
account of UTF-8 multibyte characters.
(cherry picked from commit 1840103c05)
Profiling reveals that pterm in Pango rendering mode uses an absurd
amount of CPU when it's not even actually _drawing_ the text, because
of all the calls to pango_layout_get_pixel_extents() while
pangofont_draw_text tries to work out which characters it can safely
draw as part of a long string. Caching the results speeds things up
greatly.
(cherry picked from commit c3ef30c883)
If you open a pterm on a different display via the --display
command-line option rather than by setting $DISPLAY, I think (and
other terminals seem to agree) that it's sensible to set $DISPLAY
anyway for processes running inside the terminal.
(cherry picked from commit dc16dd5aa4)
Users have requested this from time to time, for distinguishing log
file names when there's more than one SSH server running on different
ports of the same host. Since we do take account of that possibility
in other areas (e.g. we cache host keys indexed by (host,port) rather
than just host), it doesn't seem unreasonable to do so here too.
(cherry picked from commit 0550943b51)
We've had several reports that launching saved sessions from the
Windows 10 jump list fails; Changyu Li reports that this is because we
create those IShellLink objects with a command line string starting
with @, and in Windows 10 that causes the SetArguments method to
silently do the wrong thing.
(cherry picked from commit 8bf5c1b31f)
A user reports that in a particular situation one of the calls to
LoadLibrary from wingss.c has unwanted side effects, and points out
that this happens even when the saved session has GSSAPI disabled. So
I've evaluated as much as possible of the condition under which we
check the results of GSS library loading, and deferred the library
loading itself until after that condition says we even care about the
results.
(cherry picked from commit 9a08d9a7c1)
