descriptor into non-blocking mode temporarily, and correctly handle returns
of EAGAIN from write(). This should fix unix-plink-stdout-nonblock, while
avoiding EAGAIN turning up where we aren't expecting it.
[originally from svn r7748]
completely broke interactive logins. The problem, or at least one of the
problems, was that in interactive use stdin, stdout, and stderr tend to be
the same file, so setting O_NONBLOCK on the latter two also sets it on the
former. Thus, we need to cope with all of them being non-blocking.
[originally from svn r7742]
[r7738 == d0db31a1ca]
the entire process because stdout is busy.
Arguably, this shouldn't apply to stderr when we're printing our own error
messages to it, but I'll leave that fix for another time.
[originally from svn r7738]
port number in the GUI when the connection type is changed if the current
port number is the standard one for the current protocol.
It's not perfect, but it should make the common case of tabbing through the
Session panel easier when starting non-SSH connections on odd ports.
[originally from svn r7635]
Should be no significant change in behaviour.
(Well, entering usernames containing commas on Plink's command line will be
a little harder now.)
[originally from svn r7628]
box on button-up rather than button-down. The effect of this is that
if a saved session is already selected in the list box and then you
double-click it, it will open rather than beeping annoyingly.
[originally from svn r7414]
simply specifying a hostname on the command line -- this would bring up the
config dialog. Use a slightly more sophisticated notion of whether the user
meant to launch a session.
[originally from svn r7321]
[r7265 == 5d76e00dac]
represent a launchable session, unless the user can be construed to
have really meant it. This means:
- starting up PuTTY when the Default Settings are launchable still
brings up the config box, and you have to hit Open to actually
launch that session
- double-clicking on Default Settings from the config box will load
them but not launch them.
On the other hand:
- explicitly loading the Default Settings on the command line using
`-load' _does_ still launch them.
[originally from svn r7265]
appears to merely fix the background colour (arranging for it to
have transparency rather than being on some kind of default grey
background), but it turns out to also fix the strange blurry
behaviour I see in the GNOME Taskbar, for no very obvious reason.
[originally from svn r7186]
inside one single uxsel front end, better to do it centrally and
avoid passing zero flags on to the front end in the first place. I'm
sure other similarly structured front ends could get confused by it
too.
[originally from svn r7171]
[r7164 == 65f9735b95]
want to know about any input events on a socket, it's simpler not to
call gdk_input_add() on it at all.
I hesitate to say `fixes', but ... this change _causes to go away_
the weird problem I had with blank host key dialogs. I have no
understanding of the chain of cause and effect between gdk_input_add
with zero flags and missing redraw events, but it seems like a
change I should make anyway, so I'm going to do so and hope the
problem doesn't come back :-/
[originally from svn r7164]
on 1st January except that I've had to fiddle with it a bit to take
account of r7117 having happened since then.
[originally from svn r7157]
[r7117 == 174bb7f1fd]
term_provide_resize_fn() was not being broken when the back end was
destroyed on session termination, causing resizing an inactive PuTTY
to be a segfault hazard.
[originally from svn r7143]
quite big and tends to hide the existence of the `Serial' config
panel.
This is implemented by folding up every branch of depth 2 or more,
which with any luck might turn out to be general enough to carry
over unchanged if other branches start expanding. Then again, we may
have to fiddle with it again when that time comes; who knows?
[originally from svn r7117]
subprocess. They were intended to make sure the child process didn't
inherit anything embarrassing or inconvenient from us, such as the
master end of its own pty, but now we instead do this by making sure
to set all our own fds to not-FD_CLOEXEC on creation. This should
fix Debian bug #357520.
(This doesn't seem to work _quite_ right in uxproxy.c's invocation
of a local proxy command: both ends of a GTK internal pipe end up in
the child process's fd space. This appears to be another GTK 1 bug,
inasmuch as it goes away when I build with Colin's preliminary GTK 2
patch; for the moment I think leaving that pipe lying around is
probably less harmful than hampering the proxy process's ability to
use extra fds by prior arrangement with PuTTY's parent process.)
[originally from svn r7107]
takes a third argument which is TRUE if the file is being opened for
writing and wants to be created in such a way that it's readable
only to the owner. This is used when saving private keys.
While I'm here, I also use this option when writing session logs, on
the general principle that they probably contain _something_
sensitive.
The new argument is only supported on Unix, for the moment. (I think
writing owner-accessible-only files is the default on Windows.)
[originally from svn r7084]
match the original icons. (Apparently I managed to introduce errors
while transcribing the originals for detailed analysis.)
While I'm at it, add the obviously useful `make install' target in
icons/Makefile, and fix the svn:ignore property on the icons
directory.
[originally from svn r7068]
(Since we choose to compile with -Werror, this is particularly important.)
I haven't yet checked that the resulting source actually compiles cleanly with
GCC 4, hence not marking `gcc4-warnings' as fixed just yet.
[originally from svn r7041]
custom Panels container widget for the PuTTY config box, since the
perfectly standard GtkNotebook does the same job. Hence, let's
remove Panels completely in favour of doing it the proper way.
[originally from svn r7034]
PuTTY causes the child process to inherit a lot of socket fds from
its parent, which is a pain if one of them then ends up holding open
a listening socket which the parent was using for port forwarding
after the parent itself is dead.
Therefore, this checkin sprinkles FD_CLOEXEC throughout the Unix
platform directory wherever there looks like being a long-lived fd.
[originally from svn r6917]
is liable to have been set on serial ports previously used as
terminal devices, and definitely wants not to be set on serial ports
being used for callout.
[originally from svn r6865]
under X: instead of having two separate fixed-width fonts one of
which is twice the width of the other, you can instead have a single
font in which some characters are twice as wide as others.
This is implemented very simply: if you specify a wide font, it will
be used for wide characters, and if you don't then the normal font
will be used for wide characters (so they'd better _be_ wide in that
font, or there'll be trouble).
I got this idea from Jed, whose latest version supports UTF-8 and
requires a font of this type. If there are going to be X fonts like
that kicking around, there will doubtless be people who want to use
them.
[originally from svn r6844]
there): `plink host -nc host2:port' causes the SSH connection's main
channel to be replaced with a direct-tcpip connection to the
specified destination. This feature is mainly designed for use as a
local proxy: setting your local proxy command to `plink %proxyhost
-nc %host:%port' lets you tunnel SSH over SSH with a minimum of
fuss. Works on all platforms.
[originally from svn r6823]
I own has both an X display and a working serial port) I have been
unable to give this the full testing it deserves; I've managed to
demonstrate the basic functionality of Unix Plink talking to a
serial port, but I haven't been able to test the GTK front end. I
have no reason to think it will fail, but I'll be more comfortable
once somebody has actually tested it.
[originally from svn r6822]
in place of making a network connection. This has involved a couple
of minor infrastructure changes:
- New dlg_label_change() function in the dialog.h interface, which
alters the label on a control. Only used, at present, to switch
the Host Name and Port boxes into Serial Line and Speed, which
means that any platform not implementing serial connections (i.e.
currently all but Windows) does not need to actually do anything
in this function. Yet.
- New small piece of infrastructure: cfg_launchable() determines
whether a Config structure describes a session ready to be
launched. This was previously determined by seeing if it had a
non-empty host name, but it has to check the serial line as well
so there's a centralised function for it. I haven't gone through
all front ends and arranged for this function to be used
everywhere it needs to be; so far I've only checked Windows.
- Similarly, cfg_dest() returns the destination of a connection
(host name or serial line) in a text format suitable for putting
into messages such as `Unable to connect to %s'.
[originally from svn r6815]
it's NULL. Since we already have one back end (uxpty) which doesn't
in fact talk to a network socket, and may well have more soon, I'm
replacing this TCP/IP-centric function with a nice neutral
`connected' function returning a boolean. Nothing else about its
semantics has currently changed.
[originally from svn r6810]
-Werror, of course) about shifting by more than the range of a data
type. They only appeared in `if' statements testing sizeof(off_t),
but gcc warns even when the code is unreachable. I've removed the
conditional code (the general case should still work even on 32-bit
machines), and hacked each shift by 32 into a pair of shifts by 16.
Note that the gcc warning is not just a helpful indication that you
may be using the wrong data type; it's actually pointing out ANSI-
undefined behaviour in shifting a signed integer beyond the size of
its type.
[originally from svn r6789]
we set _FILE_OFFSET_BITS to 64 on the compiler command line (via mkfiles.pl),
and on Windows we use SetFilePointer and GetFileSize to cope with 64-bit sizes
where possible. Not tested on Win9x.
[originally from svn r6783]
Shift-hjklyubn for batch movement in NetHack, because they have
subtly different behaviour within the game and the Ctrl-moves are
more useful. Unfortunately, PuTTY's NetHack keypad mode doesn't
support Ctrl-moves. Therefore, it does now :-)
[originally from svn r6593]
sufficiently large string into pterm in any circumstances in which
it's echoed back to the terminal will cause a deadlock once the
pty's write buffer fills up.
[originally from svn r6582]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
basis for other terminal-involving applications: a stub
implementation of the printing interface, an additional function in
notiming.c, and also I've renamed the front-end function beep() to
do_beep() so as not to clash with beep() in lib[n]curses.
[originally from svn r6479]
abstracted out; replace loops structured around a single interaction
per loop with less tortuous code (fixes: `ki-multiprompt-crash',
`ssh1-bad-passphrase-crash'; makes `ssh2-password-expiry' and
`proxy-password-prompt' easier).
The new interaction abstraction has a lot of fields that are unused in
the current code (things like window captions); this is groundwork for
`gui-auth'. However, ssh.c still writes directly to stderr; that may
want to be fixed.
In the GUI apps, user interaction is moved to terminal.c. This should
make it easier to fix things like UTF-8 username entry, although I
haven't attempted to do so. Also, control character filtering can be
tailored to be appropriate for individual front-ends; so far I don't
promise anything other than not having made it any worse.
I've tried to test this fairly exhaustively (although Mac stuff is
untested, as usual). It all seems to basically work, but I bet there
are new bugs. (One I know about is that you can no longer make the
PuTTY window go away with a ^D at the password prompt; this should be
fixed.)
[originally from svn r6437]
[this svn revision also touched putty-wishlist]
<sys/time.h>. Cope with this. Where <sys/select.h> _is_ available, though,
use it (since it's where POSIX puts select()). Problem reported by Mike
Protts.
[originally from svn r6310]
Use the POSIX PATH_MAX if it exists, and fall back to 1024 otherwise.
We should really allocate filenames dynamically if PATH_MAX isn't defined.
[originally from svn r6307]
TS_BRK on output. This is tested to the extent that other data survive the
escaping performed by PARMRK, at least on my system. Actual passing on
of BREAK is as-yet untested.
[originally from svn r5779]
there, though (e.g.) switching to using reverse video for the cursor would
probably also help. Displays with other silly depths (e.g. 2bpp) aren't
catered for, but I suspect they're rare in the X world.
[originally from svn r5696]
the other output flags with SSH. This means that when I log into a remote
system using Plink and then run "stty -onlcr" I get the expected
stair-stepping.
[originally from svn r5679]
X/Open and actually seems to be more common (NetBSD has it). Also use
updwtmpx() rather than directly writing to the wtmpx file, though more for
reasons of aesthetics than anything practical.
[originally from svn r5678]
colours we asked it for. This means that I can run pterm on an 8-bit
PseudoColor display even if I have another program running.
[originally from svn r5677]
necessary on Solaris if we want to use SIOCATMARK. Using sockatmark() might
be preferable, but despite being notionally standard it's missing on
Solaris 9 and Mac OS X 10.3.9, whereas everyone seems to have SIOCATMARK
somewhere.
[originally from svn r5676]
_XOPEN_SOURCE. We do still need _GNU_SOURCE in order to get grantpt()
on GNU systems. This allows uxpty.c to compile on NetBSD.
[originally from svn r5675]
rather than relying on the user to edit the Makefile. Makefile.gtk
still works as well as it ever did, but now we get a Makefile.in alongside
it. mkunxarc.sh now relies on autoconf and friends to build the configure
script for the Unix source distribution.
[originally from svn r5673]
the semantics of assert(0) and believes it can return. Add a gratuitous
exit(1) to convince it that this won't happen, and hence quell a couple of
warnings about variables' being used uninitialised.
[originally from svn r5669]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
that the global `sesslist' got out of sync with the saved-sessions submenu,
causing the latter to launch the wrong sessions.
Also, Change Settings wasn't getting a fresh session list, so if the set of
sessions had changed since session startup it wouldn't reflect that (at least
until a session was saved). Fixed (on all platforms).
Therefore, since the global sesslist didn't seem to be useful, I've got rid
of it; config.c creates one as needed, as do the frontends. (Not tried
compiling Mac changes.)
Also, we now build the saved-sessions submenu on demand on Windows and Unix.
(This should probably also be done on the Mac.)
[originally from svn r5609]
in question vary per OS: on Windows the problem is that WM_TIMER
sometimes goes off too early, so that GetTickCount() is right and
the callback time is wrong, whereas on Unix the problem is that my
GETTICKCOUNT implementation comes from the system clock which means
it can change suddenly and non-monotonically if the sysadmin is
messing about (meaning that the timing of callbacks from GTK or
select timeouts is _more_ likely to be right than GETTICKCOUNT).
This checkin provides band-aid workarounds for both problems, which
aren't pretty but ought to at least prevent catastrophic assertion
failure.
[originally from svn r5556]
