allocated type.
The main reason for this is to stop it from taking up a fixed large
amount of space in every 'struct value' subunion in conf.c, although
that makes little difference so far because Filename is still doing
the same thing (and is therefore next on my list). However, the
removal of its arbitrary length limit is not to be sneezed at.
[originally from svn r9314]
data channels. Should comprehensively fix 'half-closed', in principle,
though it's a big and complicated change and so there's a good chance
I've made at least one mistake somewhere.
All connections should now be rigorous about propagating end-of-file
(or end-of-data-stream, or socket shutdown, or whatever) independently
in both directions, except in frontends with no mechanism for sending
explicit EOF (e.g. interactive terminal windows) or backends which are
basically always used for interactive sessions so it's unlikely that
an application would be depending on independent EOF (telnet, rlogin).
EOF should now never accidentally be sent while there's still buffered
data to go out before it. (May help fix 'portfwd-corrupt', and also I
noticed recently that the ssh main session channel can accidentally
have MSG_EOF sent before the output bufchain is clear, leading to
embarrassment when it subsequently does send the output).
[originally from svn r9279]
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
plink did not cope gracefully with this -- it was not possible to override that
hostname on the command line (attempts at doing so would be treated as part of
the remote command).
Fix this by applying the principle of r7265: if the user didn't explicitly
specify that they wanted to launch the hostname in the default (for instance
with '-load "Default Settings"', we assume they don't want to, and such a
hostname doesn't count when deciding whether to treat a non-option argument as
hostname or command.
[originally from svn r8651]
[r7265 == 5d76e00dac]
[r7266 == 856ed4ae73]
the backend's unthrottle function. If we don't, we'll deadlock. While
we're here, also pump as much data as possible out during each call to
try_output(), rather than restricting ourselves to a single call to
write().
[originally from svn r7755]
descriptor into non-blocking mode temporarily, and correctly handle returns
of EAGAIN from write(). This should fix unix-plink-stdout-nonblock, while
avoiding EAGAIN turning up where we aren't expecting it.
[originally from svn r7748]
completely broke interactive logins. The problem, or at least one of the
problems, was that in interactive use stdin, stdout, and stderr tend to be
the same file, so setting O_NONBLOCK on the latter two also sets it on the
former. Thus, we need to cope with all of them being non-blocking.
[originally from svn r7742]
[r7738 == d0db31a1ca]
the entire process because stdout is busy.
Arguably, this shouldn't apply to stderr when we're printing our own error
messages to it, but I'll leave that fix for another time.
[originally from svn r7738]
Should be no significant change in behaviour.
(Well, entering usernames containing commas on Plink's command line will be
a little harder now.)
[originally from svn r7628]
there): `plink host -nc host2:port' causes the SSH connection's main
channel to be replaced with a direct-tcpip connection to the
specified destination. This feature is mainly designed for use as a
local proxy: setting your local proxy command to `plink %proxyhost
-nc %host:%port' lets you tunnel SSH over SSH with a minimum of
fuss. Works on all platforms.
[originally from svn r6823]
I own has both an X display and a working serial port) I have been
unable to give this the full testing it deserves; I've managed to
demonstrate the basic functionality of Unix Plink talking to a
serial port, but I haven't been able to test the GTK front end. I
have no reason to think it will fail, but I'll be more comfortable
once somebody has actually tested it.
[originally from svn r6822]
it's NULL. Since we already have one back end (uxpty) which doesn't
in fact talk to a network socket, and may well have more soon, I'm
replacing this TCP/IP-centric function with a nice neutral
`connected' function returning a boolean. Nothing else about its
semantics has currently changed.
[originally from svn r6810]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
abstracted out; replace loops structured around a single interaction
per loop with less tortuous code (fixes: `ki-multiprompt-crash',
`ssh1-bad-passphrase-crash'; makes `ssh2-password-expiry' and
`proxy-password-prompt' easier).
The new interaction abstraction has a lot of fields that are unused in
the current code (things like window captions); this is groundwork for
`gui-auth'. However, ssh.c still writes directly to stderr; that may
want to be fixed.
In the GUI apps, user interaction is moved to terminal.c. This should
make it easier to fix things like UTF-8 username entry, although I
haven't attempted to do so. Also, control character filtering can be
tailored to be appropriate for individual front-ends; so far I don't
promise anything other than not having made it any worse.
I've tried to test this fairly exhaustively (although Mac stuff is
untested, as usual). It all seems to basically work, but I bet there
are new bugs. (One I know about is that you can no longer make the
PuTTY window go away with a ^D at the password prompt; this should be
fixed.)
[originally from svn r6437]
[this svn revision also touched putty-wishlist]
<sys/time.h>. Cope with this. Where <sys/select.h> _is_ available, though,
use it (since it's where POSIX puts select()). Problem reported by Mike
Protts.
[originally from svn r6310]
TS_BRK on output. This is tested to the extent that other data survive the
escaping performed by PARMRK, at least on my system. Actual passing on
of BREAK is as-yet untested.
[originally from svn r5779]
the other output flags with SSH. This means that when I log into a remote
system using Plink and then run "stty -onlcr" I get the expected
stair-stepping.
[originally from svn r5679]
Unix Plink sends everything sensible it can find, and it's fully configurable
from the GUI.
I'm not entirely sure about the precise set of modes that Unix Plink should
look at; informed tweaks are welcome.
Also the Mac bits are guesses (but trivial).
[originally from svn r5653]
[this svn revision also touched putty-wishlist]
in question vary per OS: on Windows the problem is that WM_TIMER
sometimes goes off too early, so that GetTickCount() is right and
the callback time is wrong, whereas on Unix the problem is that my
GETTICKCOUNT implementation comes from the system clock which means
it can change suddenly and non-monotonically if the sysadmin is
messing about (meaning that the timing of callbacks from GTK or
select timeouts is _more_ likely to be right than GETTICKCOUNT).
This checkin provides band-aid workarounds for both problems, which
aren't pretty but ought to at least prevent catastrophic assertion
failure.
[originally from svn r5556]
* All the PuTTY tools for Windows and Unix now contain the fingerprints of
the Master Keys. The method for accessing them is crude but universal:
a new "-pgpfp" command-line option. (Except Unix PuTTYgen, which takes
"--pgpfp" just to be awkward.)
* Move the key policy discussion from putty-website/keys.html to
putty/doc/pgpkeys.but, and autogenerate the former from the latter.
Also tweak the text somewhat and include the fingerprints of the
Master Keys themselves.
(I've merged the existing autogeneration scripts into a single new
one; I've left the old scripts and keys.html around until such time
as the webmonster reviews the changes and plumbs in the new script;
he should remove the old files then.)
[originally from svn r5524]
[this svn revision also touched putty-website]
means that we send literal CRs and let the remote pty layer work out what to
do with them, so that if it wants raw mode it can have it.
[originally from svn r5114]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
which pretty much any module can call to request a call-back in the
future. So terminal.c can do its own handling of blinking, visual
bells and deferred screen updates, without having to rely on
term_update() being called 50 times a second (fixes: pterm-timer);
and ssh.c and telnet.c both invoke a new module pinger.c which takes
care of sending keepalives, so they get sent uniformly in all front
ends (fixes: plink-keepalives, unix-keepalives).
[originally from svn r4906]
[this svn revision also touched putty-wishlist]
- new function platform_get_x_display() to find a sensible local display.
On Unix, the Gtk apps weren't taking account of --display when
determining where to send forwarded X traffic.
- explicitly document that leaving X display location blank in config tries
to do something sensible (and that it's now blank by default)
- don't override X11Display setting in plink, since that's more properly
done later
[originally from svn r4604]
and "plink user@host" differed in that the former attempted to load session
`host' while the latter didn't. Now both forms attempt to load a session.
Someone will probably complain, but hey.
[originally from svn r4485]
before "-load" is processed so that it doesn't clobber it.
I've also changed the semantics of "-load" slightly for PSCP, PSFTP,
and Plink: if it's specified at all, it overrides (disables) the
implicit loading of session details based on a supplied hostname
elsewhere (on the grounds that the user is more likely to want the
"-load" session than the implicit session). (PuTTY itself doesn't do
implicit loading at all, so I haven't changed it.)
This means that all the PuTTY tools' behaviour is now consistent iff
"-load" is specified (otherwise, some tools have implicit-session, and
others don't).
However, I've not documented this behaviour, as there's a good chance
it will be swept away if and when we get round to sorting out how we
deal with settings from multiple sources. It's intended as a "do
something sensible" change.
[originally from svn r4352]
No very good reason, but I've occasionally wanted to frob it to see if it
makes any difference to problems I'm having, and it was easy.
Tested that it does actually cause keepalives on Windows (with tcpdump);
should also work on Unix. Not implemented on Mac (does nothing), but then
neither is TCP_NODELAY.
Quite a big checkin, much of which is adding `keepalive' alongside `nodelay'
in network function calls.
[originally from svn r4309]
- update usage info in tools
- ack, plink is over 24 lines now
- update man pages for Unix version
- Doc changes:
- move long description from (GUI) "config" to "using"
- sorry if complete specification isn't what this section is meant for,
but if you only read "using" it was hard to find.
- ensure enough references to this made in other sections (GUI,
command-line)
- update instance of plink usage info
[originally from svn r3740]
from_backend() interface, after having made all implementations safe against
being called with len==0 and possibly-NULL/undefined "data".
(This includes making misc.c:bufchain_add() more robust in this area.)
Assertion was originally added 2002-03-01; e.g., see plink.c:1.53 [r1571].
I believe this now shouldn't break anything.
This should hopefully make `ppk-empty-comment' finally GO AWAY. (Tested
with Unix PuTTY.)
[originally from svn r3500]
[r1571 == fdbd697801]
platform-independent source file. Haven't yet added the extra
abstraction routines to uxsftp.c to create a Unix PSCP port, but it
shouldn't take long.
Also in this checkin, a change of semantics in platform_default_s():
now strings returned from it are expected to be dynamically allocated.
[originally from svn r3420]
... here's a Unix port of PSFTP. Woo. (Oddly PSCP looks to be
somewhat harder; there's more Windows code interleaved than there
was in PSFTP.)
[originally from svn r3419]
supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS
5 isn't supported, but it'll be no difficulty once I actually get
round to it). Thanks to Chas Honton for his `stone soup' patch: I
didn't end up actually using any of his code, but it galvanised me
into doing it properly myself :-)
[originally from svn r3055]
being able to be a PuTTY as well as a pterm. In the process I've
also moved icky things like actually reading from the pty fd and
printing the `terminated on signal' messages into pty.c where they
obviously should have been in the first place. Also there's been one
interesting repercussion in the terminal code: terminal.c's
from_backend now calls term_out() directly rather than expecting the
front end to call it afterwards. This has had the entertaining side
effect of fixing a Windows-specific bug whereby activity in a port
forwarding through a PuTTY with a blinking cursor caused the cursor
to blink to ON (!!!!). So, a surprisingly far-reaching checkin as it
turns out...
[originally from svn r3017]
functionality that deal with selectable fds in general. The idea is
that pty.c will stop passing its fd straight to pterm.c and hand it
to this module instead, and pterm.c will start requesting a general
list of fds from this module rather than expecting a single one from
pty.c, with the ultimate aim of pterm.c being able to form the basis
of a Unix PuTTY as well as pterm proper.
[originally from svn r3015]
malloc functions, which automatically cast to the same type they're
allocating the size of. Should prevent any future errors involving
mallocing the size of the wrong structure type, and will also make
life easier if we ever need to turn the PuTTY core code from real C
into C++-friendly C. I haven't touched the Mac frontend in this
checkin because I couldn't compile or test it.
[originally from svn r3014]
opaque to all platform-independent modules and only handled within
per-platform code. `Filename' is there because the Mac has a magic
way to store filenames (though currently this checkin doesn't
support it!); `FontSpec' is there so that all the auxiliary stuff
such as font height and charset and so on which is needed under
Windows but not Unix can be kept where it belongs, and so that I can
have a hope in hell of dealing with a font chooser in the forthcoming
cross-platform config box code, and best of all it gets the horrid
font height wart out of settings.c and into the Windows code where
it should be.
The Mac part of this checkin is a bunch of random guesses which will
probably not quite compile, but which look roughly right to me.
Sorry if I screwed it up, Ben :-)
[originally from svn r2765]
holdout static I hadn't noticed; unicode.c had one too; and a large
number of statics that were perfectly OK due to being constants have
been made `const', with assorted `const' repercussions all over the
place. I now declare `remove-statics' to be fixed.
[originally from svn r2594]
completely from putty.h. It's now static in each of the command-line
front ends, shared only between window.c and windlg.c in PuTTY
proper (I've tested this by doing #define cfg cfgsillyname in those
two files only, and it still links so nobody else is using that
symbol!), and part of the `inst' structure in pterm. I think that
only leaves the Unicode module as the last stubborn holdout in the
anti-global-variables campaign.
[originally from svn r2568]
and have a function to pass in a new one. (Well, actually several
back ends don't actually bother to do this because they need nothing
out of Config after the initial setup phase, but they could if they
wanted to.)
[originally from svn r2561]
and pterm need at least one default setting to be _different_ (pterm
needs the default term type to be `xterm', while plink needs it to
be taken from $TERM). So here's a completely new alternative
mechanism for platform- and app-specific default settings. Ben will
probably want to check the integrity of the Mac port, since I've
fiddled with it without testing that it still compiles.
[originally from svn r2513]
doesn't hang when you hit ^C, which is nice. I think a better
solution would involve nonblocking sockets; as it stands it's a
little dependent on what may be quirks of the Linux socket layer.
[originally from svn r2175]
doesn't yet use the SSH agent, no way to specify arbitrary config
options, no manpage yet, couple of other fiddly things need doing,
but it makes SSH connections and doesn't fall over horribly so I say
it's a good start. Now to run it under valgrind...
[originally from svn r2165]
