and avoiding trashing a non-default port, don't treat a port of 0 as special;
this was causing defaults to "freeze in" for sequences of clicks like SSH,
Raw, Telnet.
Arrange that a port of 0 (which in a backend indicates no default) is displayed
as a blank in the port box, to make this less jarring.
[originally from svn r9077]
[r7635 == db7cc1cba6]
those in the CHAN_SOCKDATA_DORMANT state (i.e., local-to-remote forwardings
which the SSH server had not yet acknowledged).
Marcel Kilgus has been running with the ssh_do_close() patch for nearly two
years (*cough*) and reports that it has eliminated frequent
'unclean-close-crash' symptoms for him (due to the unclosed socket generating
a pfd_closing() which accessed freed memory), although I've not reproduced
that. The patch to ssh_free() is mine and not known to fix any symptoms.
[originally from svn r9069]
[this svn revision also touched putty-wishlist]
rectangle into smaller ones: it doesn't work any more, since the new
variable-pitch code can now call general_textout() with a larger
clipping rectangle than the text it's meant to be displaying. Instead,
general_textout() now uses the same semantics as the next loop up in
do_text_internal(): the first piece of text it displays uses the
opacity setting passed in, which blanks the entire clipping rectangle
if necessary, and then subsequent overlays are non-opaque. And the
same clipping rectangle is used throughout.
[originally from svn r9067]
array to ExtTextOut:
- move it inside the new big loop (this should fix a potential bug
whereby the DBCS handling altered some elements of it but the loop
did not actually step along it)
- initialise it more sensibly
- rename it to lpDx rather than IpDx, since as far as I can tell the
latter name was derived from a misreading of the former in the
Windows API docs.
[originally from svn r9066]
pass null lpDx, because general_textout depends on it being filled in.
Instead we null it out in the calls to subroutines _from_
general_textout.
[originally from svn r9064]
Done in much the same way as it is in the GTK front end: the character
cell width is determined using the font's digits (which seems to give
generally not-too-offensive spacing in most cases, at the expense of
Ms and Ws typically overhanging a bit into adjacent cells) and each
character is centred in its cell. Overhangs never leave permanent
droppings on the window, because the existing work done in r5003
handles them just fine even in this stressful scenario.
There's a hacky new checkbox in the Appearance panel to make
variable-pitch fonts appear in the font selector (they still don't by
default, because I still think it's _usually_ not What You Want); the
checkbox state is not actually stored as part of a saved session, but
it should be automatically ticked when reloading a session that's got
a variable pitch font selected.
(I'm half-expecting a potential flurry of requests for this feature in
the wake of http://xkcd.com/840/ , so I thought I'd pre-empt them :-)
[originally from svn r9063]
[r5003 == ba470dec5e]
I'm not sure whether I broke this in the recent revamp or whether it
was always broken, but: transitions in and out of full-screen mode
work by first maximising or restoring the window, which triggers a
WM_SIZE, whose handler then fiddles with the window style to disable
or re-enable all the furniture, which in turn triggers a recursive
WM_SIZE. The trouble is, after returning from the handler for the
inner WM_SIZE, the rest of the outer handler runs, and its client area
size is now out of date.
So I've added a flag which is set when a resize is handled 'properly',
so that after returning from the inner WM_SIZE handler the outer one
knows not to try to redo badly work that's already been done well.
[originally from svn r9056]
MinGW after r9046, and munge the COMPTR() macro to remove a couple of warnings
with my MinGW GCC (3.4.5).
[originally from svn r9049]
[r9046 == 1a03fa9292]
icon, even if the program isn't running at the time, to be presented
with an application-defined collection of helpful links). The current
jump list is updated every time a saved session is loaded, and shows
the last few launchable saved sessions (i.e. not those like Default
Settings) that were loaded. Also, if Pageant or PuTTYgen or both is in
the same directory as the PuTTY binary, the jump list will present
links to launch those too.
Based on a patch sent last year by Daniel B. Roy, though it's barely
recognisable any more...
[originally from svn r9046]
maximised state, we must be sure to disable the window offset used to
centre the terminal in cases where the window is non-negotiably the
wrong size (e.g. maximised). Hence we must call reset_window after our
terminal resize.
[originally from svn r9044]
should solve some of the SID-mismatch issues we've occasionally had
reported. Because it's a modification on the client side, it doesn't
affect the security of Pageant itself.
[originally from svn r9043]
restoring a maximised window.
Failure to do this was noticeable in the following scenario (again
using Aero UI enhancements):
1. resize window using topmost resize handle, and move pointer to top
of screen which 'maximises' the window vertically
2. now maximise the window properly using the maximise button in top
right
3. now restore. Notepad restores to its position before step 1,
because Aero remembers that position for the purpose, but PuTTY
thinks it knows better. Only now it doesn't any more.
[originally from svn r9041]
Firstly, maximise and restore events were expected never to occur
during an interactive resize process (i.e. between WM_ENTERSIZEMOVE
and WM_EXITSIZEMOVE), but in fact Aero now allows this to happen if
you move the pointer to the top of the screen while dragging the
window.
Secondly, plain old WM_SIZE events were expected never to occur
_outside_ interactive resizes, but Aero permits that too (e.g.
Windows-left and Windows-right), and also third-party window
repositioning tools will send these.
[originally from svn r9040]
supplied extra link flags. This makes it reasonably convenient to
compile for Visual Studio debugging: just build using
nmake /f Makefile.vc XFLAGS="/Zi /Od" XLFLAGS="/debug"
then load the resulting executable into Visual Studio (using 'Open
Project' rather than 'Open File') and the debugger should be able to
access the source.
[originally from svn r9038]
union of rates found in the termios.h of Linux 2.6.24 and "SunOS 5.6
Generic_105181-29 sun4u sparc SUNW,Ultra-4" machines. After a patch by
Thomas Bechtold.
[originally from svn r9028]
attempt to block, and hence return EAGAIN/EWOULDBLOCK, in spite of
the port having been reported readable by select(2). Don't treat
those errors as fatal.
[originally from svn r9020]
ages, is increasingly irrelevant now that 'Mac' pretty much
universally means something running OS X, is probably bit-rotted
past usefulness already, and certainly will be after the next time
some major reengineering takes place.
[originally from svn r9004]
are now loaded from standard locations (system32 for SSPI, the
registry-stored MIT KfW install location for KfW) rather than using
the risky default DLL search path; I've therefore also added an
option to manually specify a GSS DLL we haven't heard of (which
should in principle Just Work provided it supports proper GSS-API as
specified in the RFC). The same option exists on Unix too, because
it seemed like too useful an idea to reserve to Windows. In
addition, GSSAPI is now documented, and also (unfortunately) its GUI
configuration has been moved out into a sub-subpanel on the grounds
that it was too big to fit in Auth.
[originally from svn r9003]
called load_system32_dll() which constructs a full pathname for the
DLL using GetSystemDirectory.
The only DLL load not covered by this change is the one for
gssapi32.dll, because that one's not in the system32 directory.
[originally from svn r8993]
testing against NULL has already been dereferenced by the time we
bother to test it, so it's a bit pointless - and in any case, no
null pointer can come to this function from any existing call site.
[originally from svn r8990]
methods left to try, it's nice to have the version of that message
going to the client contain the list of methods sent by the server.
Saves a user having to pull it out of an SSH packet log.
[originally from svn r8981]
called 'pending_close'. This deals with the situation in which we're
forwarding a port, have received and locally buffered some data from
the local endpoint but not yet been able to pass it down the SSH
connection due to window limitations, and then the local endpoint
closes its socket. In this situation what we've been doing until now
is to immediately send SSH2_MSG_CHANNEL_CLOSE, causing the data
still in our local buffer to be lost; now we instead set the new
flag, which will remind us to send SSH2_MSG_CHANNEL_CLOSE _after_ we
empty our bufchain.
Should fix at least one manifestation of 'portfwd-close', though I
don't know if it's the cause of all the reports we've ever seen.
[originally from svn r8971]
insist on finding a bit of spare screen to put it in. Still pondering whether
it's sensible to do this with the "change settings" box as well.
[originally from svn r8970]
as part of r8952 (the patch submitter had done it as a temporary
measure and I forgot to undo it before checkin).
[originally from svn r8956]
[r8952 == 99fffd6ed3]
