These should dump out all the important parts of the incoming
GdkEventKey, so that if keys aren't being translated right, it should
be possible to work out something about why not.
To enable: make CPPFLAGS="-DKEY_EVENT_DIAGNOSTICS"
These are a slightly cleaned-up version of the diagnostics I was using
to debug the layout problems in the GTK3 config box the other day. In
particular, if the box comes out far too wide - as I've just found out
that it also does when I compile the current state of the code against
OS X GTK3 - these diagnostics should provide enough information to
figure out which control is the limiting factor.
To enable: make CPPFLAGS="-DCOLUMNS_WIDTH_DIAGNOSTICS"
In shortcut_add(), when we add an underlined letter to a GtkLabel, we
were fetching the label's height before changing its text, and
restoring it afterwards. I've no idea why - I can see no difference
with and without the code.
That code's been there since 2003 without explanation. My best guess
is that it was working around a GTK bug of the day, but since no
difference is visible even in current GTK1, I think I'm just going to
remove it. If any problems show up later, I can put it back, with an
actual comment!
The whole of get_label_text_dimensions() should have been outside the
GTK 2 ifdef; I'd left a gtk_label_set_width_chars() unconditional; and
GDK1's gdk_window_set_background() lacks a const in its prototype.
Serves me right for not test-compiling in all three versions!
My trickery in GTK2 to start with some branches of the tree collapsed
but give the widget all the width it will need when they open later
was not working in GTK3, for the same reason I've needed several other
fixes recently: just after creation, GTK3 widgets report their
preferred size as zero.
Fixed by doing basically the same trick I was doing in GTK2, but
deferring it until the "map" event happens later on.
This was another piece of code that determined text size by
instantiating a GtkLabel and asking for its size, which I had to fix
in gtkfont.c recently because that strategy doesn't work in GTK3.
Replaced the implementation of string_width() with a call to the
function I added in gtkfont.c, and now dialog boxes which depend on
that for their width measurement (e.g. the one in reallyclose()) don't
come out in silly sizes on GTK3 any more.
In cases where two controls sit alongside one another such as a label
alongside an edit box, I've previously been arranging for them to be
vertically centred by fiddling with the size request and alignment of
what I assume will be the shorter control. But now I've written
columns_force_same_height(), that's a much easier approach, and it's
also compatible with GTK3 without using a deprecated method; so this
change switches over all vertical centring to doing it that way.
Also, while I'm here, I noticed that the edit box and button of
CTRL_FILESELECT / CTRL_FONTSELECT were not vertically centred, and
since it's now really easy to make sure they are, I've added another
use of columns_force_same_height() there.
This forces two child widgets of a Columns to occupy the same amount
of vertical space, and if one is really shorter than the other,
vertically centres it in the extra space.
This is an obviously reusable loop over cols->children looking for a
widget, which I'm about to use a couple more times so it seems worth
pulling it out into its own helper function.
gtk_window_resize_to_geometry() allows us to make use of the already-
set-up WM resize hints to immediately figure out how to resize the
window to a particular character cell size, and hence makes a much
simpler implementation of request_resize() than the previous hackery.
Now that I've got the main calculation code separated from the GTK2
size_request and size_allocate top-level methods, I can introduce a
completely different set of GTK3 top-level methods, which run the same
underlying calculations but based on different width and height
information.
So now we do proper height-for-width layout, as you can see if you
flip the PuTTY config box to a pane with a wrapping label on it (e.g.
Fonts or Logging) and resize the window horizontally. Where the GTK2
config box just left the wrapped text label at its original size, and
the GTK3 one before this change would reflow the text but without
changing the label's height, now the text reflows and the controls
below it move up and down when the number of lines of wrapped text
changes.
(As far as I'm concerned, that's a nice demo of GTK3's new abilities
but not a critically important UI feature for this app. The more
important point is that switching to the modern layout model removes
one of the remaining uses of the deprecated gtk_widget_size_request.)
Previously, columns_size_request and columns_size_allocate would each
loop over all the widgets doing computations for both width and
height. Now I've separated out the width parts from the height parts,
and moved both out into four new functions, so that the top-level
columns_size_request and columns_size_allocate are just wrappers that
call the new functions and plumb size and position information between
them and GTK.
Actual functionality should be unchanged by this patch.
Profiling reveals that pterm in Pango rendering mode uses an absurd
amount of CPU when it's not even actually _drawing_ the text, because
of all the calls to pango_layout_get_pixel_extents() while
pangofont_draw_text tries to work out which characters it can safely
draw as part of a long string. Caching the results speeds things up
greatly.
If you're trying to arrange that an array size is large enough for
element n to exist, and you also want to round it up to the next
multiple of 0x100, you must set the size to (n + 0x100) & ~0xFF, and
not (n + 0xFF) & ~0xFF. Put another way, the number you have to round
up is not n, but the minimum size n+1 that causes array[n] to exist.
If you open a pterm on a different display via the --display
command-line option rather than by setting $DISPLAY, I think (and
other terminals seem to agree) that it's sensible to set $DISPLAY
anyway for processes running inside the terminal.
This replaces the old GtkColorSelectionDialog, and has the convenience
advantage that the actual chooser (with all the 'set colour', 'get
colour' methods) and the containing dialog box are now the same object
implementing multiple interfaces, so I don't keep having to call 'get
me the underlying chooser for this dialog' accessors. Also you now
hook into both the OK and Cancel buttons (and all other response
codes) at the same time with a single event.
GtkTable is deprecated; the way of the future is GtkGrid, in which you
don't have to specify the number of rows/columns in advance (it's
worked out dynamically by observing what row/column numbers you
actually attached anything to), and also you handle expansion
behaviour by setting the "hexpand", "vexpand" or "expand" properties
on the child widgets rather than setting flags in the container.
The new way is gdk_display_get_name(gdk_display_get_default()), which
returns a const char * rather than a char *, so I've also had to
fiddle with the prototype and call sites of get_x_display().
(Also included gtkcompat.h into uxputty.c, since that wanted to call
gdk_get_display() but didn't previously include it.)
In GTK3, GtkBox, GtkScrollbar and GtkSeparator are all single classes
with a GtkOrientation parameter, whereas in GTK2 the horizontal and
vertical versions were trivial subclasses of them. Hence, the old
constructors are now deprecated, but _only_ the constructors are
affected, since after constructing one you always used methods of the
superclass on it anyway.
Rather than faff about with an ifdef at every call site, I've just put
some wrapper macros in gtkcompat.h to make it easy to keep this code
similar between all supported GTK versions.
In the case where we deselect the previously selected font (e.g.
because we've just changed the filter settings to remove it from the
list), we were leaving the preview pane in its previous state, which
is fine in GTK2 when it just carries on displaying the last thing
drawn to the backing pixmap but goes wrong in GTK3 where we still have
to actually respond to draw events.
But it makes more conceptual sense anyway to actually empty the
preview pane when no font is selected, so now we do that. So now
unifontsel_draw_preview_text() is called from unifontsel_deselect(),
and also the preview-drawing code will still draw the background
rectangle regardless of whether font != NULL.
The call to gtk_list_store_clear() in unifontsel_setup_familylist()
was causing a call to family_changed() via the GTK signal system,
which didn't happen in GTK2. family_changed() in turn was calling
unifontsel_select_font(), which got confused when the tree model
didn't match reality, and tried to access a bogus tree iterator.
This is easily fixed by using the existing fs->inhibit_response flag,
which prevents us responding to GTK events when we know they were
generated by our own fiddling about with the data; it's just that we
never needed to set it in unifontsel_setup_familylist() before.
Also, added a check of the return value from the key get_iter call in
unifontsel_select_font(), so that it'll at least fail an assertion
rather than actually trying to access bogus memory. But that operation
_should_ still always succeed, and if it doesn't, it's probably a sign
that we need another use of fs->inhibit_response.
It turns out that in GTK3, if you instantiate a GtkLabel and
immediately try to find out its preferred size, you get back zero for
both dimensions. Presumably none of that gets figured out properly
until the widget is displayed, or some such.
However, you can retrieve the PangoLayout from the label immediately
and ask Pango for the dimensions of that. That seems like a bit of a
bodge, but it works! The GTK3 unifont selector now comes out with all
the interface elements in sensible sizes - in particular, the preview
drawing area now has non-zero height.
The config box setup code wants a lot of very narrow edit boxes, so it
decreases their minimum width from the GTK default of 150 pixels. In
GTK 3, we have to do this using gtk_entry_set_width_chars() rather
than gtk_widget_set_size_request() as we were previously using, or it
won't work.
This change by itself seems to restore the GTK3 config box to a
sensible layout, in spite of the fact that my Columns layout class is
still doing all its size allocation the GTK2 way, with no attention
paid to the shiny new GTK3 height-for-width system.
The entire concept has gone away in GTK3, which assumes that everyone
is now using modern true-colour video modes and so there's no longer
any reason you shouldn't just casually make up any RGB triple you like
without bothering to ask the display system's permission.
GDK3 now spells both of those as GDK_WINDOW_XID. (Of course 'drawable'
is no longer a relevant concept in GDK3, since pixmaps are no longer
supported and so all drawables are just windows.) We keep backwards
compatibility, of course.
It's been replaced by a new pair of methods get_preferred_width and
get_preferred_height. For the moment, I've followed the porting
guide's suggestion of keeping the old size_request function as an
underlying implementation and having each of those methods just return
one of its outputs. The results are ugly, but it'll compile and run,
which is a start.
This replaces GTK 1/2's "expose_event", and provides a ready-made
cairo_t to do the drawing with. My previous work has already separated
all constructions of a cairo_t from the subsequent drawing with it, so
the new draw event handlers just have to call the latter without the
former.
This is the new recommended approach since gdk_input_{add,remove} were
deprecated (and, honestly, seems a lot more sensible - why on earth
would those functions have lived in *GDK* of all places?). The old
implementation is preserved under ifdef for GTK1.
This was the last of the GDK deprecated functions to go! So GTK PuTTY
now compiles cleanly with -DGDK_DISABLE_DEPRECATED in addition to all
the other precautionary flags (though if you do that, you disable GDK
rendering, which greatly slows down server-side font handling). This
completes the GTK2-compatible preparation phase of the GTK 3 migration
guide.
In case a front end needs to store more than an integer id to be
returned to uxsel_input_remove, we now return a pointer to a
frontend-defined structure.
GTK is deprecating the use of gdk_window_set_icon(), in favour of a
method that doesn't have to drop down to the GDK level at all (and
also doesn't use a pixmap). No reason not to use that instead.
I've just noticed the comment in gtkfont.c that said wouldn't it be
nice to find a way to avoid the GDK pixmap-stretching code when using
Pango fonts. We now do support this, but we support it in gtkwin.c
rather than gtkfont.c - because we do it using a Cairo transformation
matrix, so it still takes place at the level above Pango rather than
in Pango proper. (I never did find out whether Pango itself included
facilities to arbitrarily stretch a font.)
Hence, this comment is useless now. Discard.
We still don't actually support more than one X display active at
once, so it's sufficient to replace every call to that macro with
GDK_DISPLAY_XDISPLAY(gdk_display_get_default()).
We won't be able to use them in GTK3, or when compiling with GTK2 and
-DGDK_DISABLE_DEPRECATED.
This applies to the one we use for the main terminal window, and also
the small one we use for the preview pane in the unified font selector.
Now it's got an inner half that does actual drawing given a draw
context, and an outer half that sets up and tears down the draw
context. Sooner or later the inner half will need calling
independently of the outer, because GTK3's draw event will provide a
ready-made cairo_t.
A small bug in yesterday's work: since in Cairo mode
draw_stretch_before changes the transformation matrix, if we do it
before calling draw_clip then the clip region will be interpreted in
the transformed coordinates.
This caused a subtle display bug in yesterday's commit: drawing one
half of double-height text would have drawn _both_ halves of it on to
the window's backing pixmap, but only copied the correct half on to
the window proper - but the overdrawing on the pixmap would have shown
up if the window was hidden and re-exposed.
We were previously building our own mouse pointers out of pixmaps,
having first drawn characters from the X server standard font 'cursor'
on to those pixmaps, giving an effect almost exactly the same as just
calling gdk_cursor_new(some constant) except that we got to choose the
foreground and background colours of the resulting pointers.
But it's not clear why we needed to do that! In both GTK1 and GTK2 as
of my current testing, the standard colours appear to be just what I
wanted anyway (white pointer with black outline). The previous
implementation (and commit comment) was written in 2002, so perhaps it
was working around a GTK1 bug of the time.
So I've removed it completely, and replaced it with simple calls to
gdk_cursor_new (plus a workaround for GTK1's lack of GDK_BLANK_CURSOR,
but that's still much simpler than the previous code). If anyone does
report a colour problem, I may have to go back to doing something
clever, but if I can possibly arrange it, I'll want to do it by some
other technique, probably (as suggested in a comment in the previous
implementation) getting the underlying X cursor id and calling
XRecolorCursor.
We're going to have to use Cairo in the GTK3 port, because that's all
GTK3 supports; but we still need old-style GDK for GTK1 support, and
also for performance reasons in GTK2 (see below). Hence, this change
completely restructures GTK PuTTY's drawing code so that there's a
central 'drawing context' structure which contains a type code
indicating GDK or Cairo, and then either some GDK gubbins or some
Cairo gubbins as appropriate; all actual drawing is abstracted through
a set of routines which test the type code in that structure and do
one thing or another. And because the type code is tested at run time,
both sets of drawing primitives can be compiled in at once, and where
possible, they will be.
X server-side bitmap fonts are still supported in the Cairo world, but
because Cairo drawing is entirely client-side, they have to work by
cheekily downloading each glyph bitmap from the server when it's first
needed, and building up a client-side cache of 'cairo_surface_t's
containing the bitmaps with which we then draw on the window. This
technique works, but it's rather slow; hence, even in GTK2, we keep
the GDK drawing back end compiled in, and switch over to it when the
main selected font is a bitmap one.
One visible effect of the new Cairo routines is in the double-width
and double-height text you can get by sending ESC # 3, ESC # 4 and
ESC # 6 escape sequences. In GDK, that's always been done by a really
horrible process of manually scaling the bitmap, server-side, column
by column and row by row, causing each pixel to be exactly doubled or
quadrupled. But in Cairo, we can just set a transformation matrix, and
then that takes effect _before_ the scalable fonts are rendered - so
the results are visibly nicer, and use all the available resolution.
(Sadly, if you're using a server-side bitmap font as your primary one,
then the GDK backend will be selected for all drawing in the terminal
as a whole - so in that situation, even fallback characters absent
from the primary font and rendered by Pango will get the old GDK
scaling treatment. It's only if your main font is scalable, so that
the Cairo backend is selected, that DW/DH characters will come out
looking nice.)
I was tacitly assuming that mfont->fallback would always be non-NULL,
which is true in a world containing Pango, but untrue in GTK1 when
Pango isn't there. In that situation we fall back to just omitting the
characters that would be displayed in the fallback font, on the
grounds that that's better than dereferencing through a NULL vtable.
GTK 2 has deprecated it and provided no replacement; a bug tracker
entry I found on the subject suggested that it was functionality that
didn't really belong in GTK, and glib ought to provide a replacement
instead, which would be a perfectly fine thing to suggest if they had
waited for glib to get round to doing so *before* throwing out a
function people were actually using. Sigh.
Anyway, it turns out that subsidiary invocations of gtk_main() don't
happen inside GTK as far as I can see, so all I need to do is to make
sure my own invocations of gtk_main() are followed by a cleanup
function which runs any quit functions that I've registered.
That was the last deprecated GTK function, so we now build cleanly
with -DGTK_DISABLE_DEPRECATED. (But, as mentioned a couple of commits
ago, we still don't build with -DGDK_DISABLE_DEPRECATED, because that
has migrating to Cairo drawing as a prerequisite.)
Now that I've got a general place to centralise handling of at least
the simple differences between GTK 1 and 2, I should use it wherever
possible. So this commit removes just a small number of ifdefs which
are either obsoleted by definitions already in gtkcompat.h (like
set_size_request vs set_usize), or can easily be replaced by adding
another (e.g. gtk_color_selection_set_has_opacity_control).
Building with -DGTK_DISABLE_DEPRECATED, we now suffer only one compile
failure, for the use of gtk_quit_add() in idle_toplevel_callback_func.
That function is apparently removed with no replacement in GTK 3, so
I'll need to find a completely different approach to getting toplevel
callbacks to run only in the outermost instance of gtk_main().
Also, this change doesn't do anything about the use of *GDK*
deprecated functions, because those include the entire family of
old-style drawing functions - i.e. the only way to build cleanly with
-DGDK_DISABLE_DEPRECATED will be to switch to Cairo drawing.
On GTK versions where it's available, this is a much nicer way of
handling the -geometry command-line option, since not only do we get
all the faffing about with gravity for free, it also automatically
sets the user-position WM hints.
I've put in a special #define to control this selection, in case I
decide that for reasons of taste I'd prefer to switch back to
GtkFileSelection in GTK2 which supports both!
Replaces the deprecated gtk_color_selection_set_color() which took an
array of four doubles (RGBA), and instead takes a 'GdkColor' struct
containing four 16-bit integers.
For GTK1, we still have to retain the original version.
All the things like GtkType, GtkObject, gtk_signal_connect and so on
should now consistently have the new-style glib names like GType,
GObject, g_signal_connect, etc.
A major aim of introducing GTK 3 support is to permit compiling for
non-X11 platforms that GTK 3 supports, so I'm going to need to be able
to build as a pure GTK application with no use of X11 internals.
Naturally, I don't intend to stop supporting the hybrid GTK+X11 mode
in which X server-side bitmap fonts are available.
Use of X11 can be removed by compiling with -DNOT_X_WINDOWS. That's
the same compatibility flag that was already used by the unfinished OS
X port to disable the X-specific parts of uxpty.c; now it just applies
to more source files.
(There's no 'configure' option to set this flag at present. I haven't
worked out whether we'll need one yet.)
GTK 2 doesn't _documentedly_ provide a helpful compile option to let
us check this one in advance of GTK 3, but you can fake one anyway by
compiling with -D__GDK_KEYSYMS_COMPAT_H__, so that gdkkeysyms-compat.h
will believe that it's already been included :-) We now build cleanly
under GTK 2 with that predefine.
This is the first of several cleanup steps recommended by the GTK 2->3
migration guide.
I intend to begin work towards compatibility with GTK 3, but without
breaking GTK 2 and even GTK 1 compatibility in the process; GTK 2 is
still useful to _me_ (not least because it permits much easier support
of old-style server-side X11 fonts), and I recall hearing a rumour
that at least one kind of strange system can only run GTK 1, so for
the moment I don't intend to stop supporting either.
Including gdkkeysyms.h is not optional in GTK 2, because gdk.h does
not include it. In GTK 3 it does, so we don't explicitly reinclude it
ourselves.
We now build cleanly in GTK2 with -DGTK_DISABLE_SINGLE_INCLUDES. (But
that doesn't say much, because we did already! Apparently gdkkeysyms.h
was a special case which that #define didn't forbid.)
This is less than ideal - passphrase input now happens in ISO 8859-1,
and the passphrase prompt window is neither centred nor always-on-top.
But it basically works, and restores bare-minimum GTK 1 support to the
codebase as a whole.
If you're counting up to ms_limit in steps of ms_step, it's silly to
add ms_step at the end of the loop body _and_ increment the loop
variable by 1 in the loop header. I must have been half asleep.
The general plan is that if PuTTY knows a host key for a server, it
should preferentially ask for the same type of key so that there's some
chance of actually getting the same key again. This should mean that
when a server (or PuTTY) adds a new host key type, PuTTY doesn't
gratuitously switch to that key type and then warn the user about an
unrecognised key.
An unguarded write() in the dputs function caused gcc -Werror to fail
to compile. I'm confused that this hasn't bitten me before, though -
obviously normal builds of PuTTY condition out the faulty code, but
_surely_ this can't be the first time I've enabled the developer
diagnostics since gcc started complaining about unchecked syscall
returns!
When anyone connects to a PuTTY tool's listening socket - whether it's
a user of a local->remote port forwarding, a connection-sharing
downstream or a client of Pageant - we'd like to log as much
information as we can find out about where the connection came from.
To that end, I've implemented a function sk_peer_info() in the socket
abstraction, which returns a freeform text string as best it can (or
NULL, if it can't get anything at all) describing the thing at the
other end of the connection. For TCP connections, this is done using
getpeername() to get an IP address and port in the obvious way; for
Unix-domain sockets, we attempt SO_PEERCRED (conditionalised on some
moderately hairy autoconfery) to get the pid and owner of the peer. I
haven't implemented anything for Windows named pipes, but I will if I
hear of anything useful.
Caused an embarrassing failure just now trying to run the test program
from a command prompt - I had Return still held down by the time it
started up, and my release of it immediately terminated input :-)
Having found a lot of unfixed constness issues in recent development,
I thought perhaps it was time to get proactive, so I compiled the
whole codebase with -Wwrite-strings. That turned up a huge load of
const problems, which I've fixed in this commit: the Unix build now
goes cleanly through with -Wwrite-strings, and the Windows build is as
close as I could get it (there are some lingering issues due to
occasional Windows API functions like AcquireCredentialsHandle not
having the right constness).
Notable fallout beyond the purely mechanical changing of types:
- the stuff saved by cmdline_save_param() is now explicitly
dupstr()ed, and freed in cmdline_run_saved.
- I couldn't make both string arguments to cmdline_process_param()
const, because it intentionally writes to one of them in the case
where it's the argument to -pw (in the vain hope of being at least
slightly friendly to 'ps'), so elsewhere I had to temporarily
dupstr() something for the sake of passing it to that function
- I had to invent a silly parallel version of const_cmp() so I could
pass const string literals in to lookup functions.
- stripslashes() in pscp.c and psftp.c has the annoying strchr nature
All the name strings in ssh_cipher, ssh_mac, ssh_hash, ssh_signkey
point to compile-time string literals, hence should obviously be const
char *.
Most of these const-correctness patches are just a mechanical job of
adding a 'const' in the one place you need it right now, and then
chasing the implications through the code adding further consts until
it compiles. But this one has actually shown up a bug: the 'algorithm'
output parameter in ssh2_userkey_loadpub was sometimes returning a
pointer to a string literal, and sometimes a pointer to dynamically
allocated memory, so callers were forced to either sometimes leak
memory or sometimes free a bad thing. Now it's consistently
dynamically allocated, and should be freed everywhere too.
I've written my own analogue of OpenSSH's ssh-askpass. At the moment,
it's contained inside Pageant proper, though it could easily be
compiled into a standalone binary as well or instead.
Unlike OpenSSH's version, I don't use a GTK edit box; instead I just
process key events myself and append them to a buffer. The big
advantage of doing this is that I can arrange for ^W and ^U to
function as they do in terminal line editing, i.e. delete a word or
delete the whole line.
^W in particular is really valuable when typing a multiple-word
passphrase unseen. If you feel yourself making the kind of typo in
which you're not sure if you pressed six keys or just five, you can
hit ^W and restart just that word, without either having to go right
back to the beginning or carry on and see if you feel lucky.
A delete-word function would of course be an information leak in even
an obscured edit box (displaying a blob per character), so instead I
give a visual acknowledgment of keypresses by a more ad-hoc means: I
display three lights in the box, and every meaningful keypress turns
off the currently active one and instead turns on a randomly selected
one of the others. (So the lit light doesn't even indicate _mod 3_ how
many keys have been pressed.)
I had freed the comment string coming back from pageant_add_keyfile,
but not NULLed out the pointer, so that the cleanup code at the end of
the function would have freed it again.
I've decided against implementing an option exactly analogous to
'ssh-add -L' (printing the full public key of everything in the
agent). Instead, you can identify a specific key to display in full,
by any of the same means -d lets you use, and then print it in either
of the public key formats we support.
Unlike ssh-add, we can identify the key by its comment or by a prefix
of its fingerprint as well as using a public key file on disk. The
string given as an argument to -d is interpreted as whichever of those
things matches; disambiguating prefixes are available if needed.
You can now load keys at Pageant init time, by putting the key file
names as bare arguments on the command line, e.g. 'pageant -T key.ppk'
or 'pageant key.ppk --exec some command'; also, 'pageant -a key.ppk'
behaves more or less like ssh-add, contacting an existing agent to add
the key.
The askpass() function currently supports terminal-based prompting
only. X11 askpass is yet to be implemented.
This brings in the code we'll need to request passphrases from the
terminal, and to talk to an existing SSH agent as a client.
Adding uxcons.c required adjusting the set of stub functions in
uxpgnt.c: uxcons.c removed the need for several, but added one of its
own (log_eventlog). A net win, though.
I've moved the setup and running of the actual agent server into
run_agent(), so that main() is now only command-line parsing and
validation. We recognise a collection of new command-line options for
talking to an existing agent as a client (analogous to ssh-add), which
go to a new run_client() function, but I haven't filled in that
function itself yet.
This is only intended for use in Unix Pageant; for any application
that's actually trying to get something else useful done at the same
time as the agent request is pending, it's much more sensible to use
the more rigorous existing approach of requesting a callback once the
agent request is answered.
Adding this mode is the easiest way to allow Unix Pageant's
command-line key loading to work, but it doesn't solve the underlying
problem that the supposedly cross-platform pageant_add_keyfile will
not work on a platform where we really _are_ constrained to do agent
requests asynchronously (perhaps because we're a GUI app in some
system that doesn't let us control our own top-level event loop).
If and when that situation arises, I'll have no choice but to turn
pageant_add_keyfile and friends (specifically, any function in
pageant.c that calls agent_query) into coroutine-structured functions,
and have clients call them repeatedly until they return 'finished'.
But for now, this is a lot easier!
Now --exec instantly terminates option processing, by treating
everything after it as the command. This means it doesn't matter if
the --exec command word looks like another option, and it also means
we can simplify the handling of real non-option argument words, when I
get round to adding some for loading keys.
This is intended to be a useful mode when you want to run an ssh agent
in a terminal session with no X11 available. You just execute a
command along the lines of eval $(pageant -T), and then Pageant will
run in the background for the rest of that terminal session - and when
the terminal session ends, so that Pageant loses its controlling tty,
it will take that as the signal to shut down. So, no need to manually
kill it, and unlike 'pageant --exec $SHELL', you can also do this half
way through a session if you don't realise until later that you need
an SSH agent, without losing any shell command history or other shell
context that you've accumulated so far in the session.
Unfortunately, I haven't been able to find any reliable way to
actually implement this -T mode, short of having Pageant wake up at
regular intervals and try to open /dev/tty to see if it's still there.
I had hoped that I could arrange to reliably get SIGHUP, or select on
/dev/tty for exceptional conditions, or some such, but nothing I've
tried along those lines seems to work.
The last use of it, to store the contents of the saved session name
edit box, was removed nearly two years ago in svn r9923 and replaced
by ctrl_alloc_with_free. The mechanism has been unused ever since
then, and I suspect any further uses of it would be a bad idea for the
same reasons, so let's get rid of it.
The memory dangling off ssd->sesslist should be freed when ssd itself
goes away, and the font settings ctrlset we delete in gtkcfg.c should
be freed as well once it's been removed from its containing array.
Thanks to Ranjini Aravind for pointing these out.
I've moved the listening socket setup back to before the lifetime
preparations, so in particular we find out that we couldn't bind to
the socket _before_ we fork. The only part that really needed to come
after lifetime setup was the logging setup, so that's now a separate
function called later.
Also, the random exit(0)s in silly places like x11_closing have turned
into setting a time_to_die flag, so that all clean exits funnel back
to the end of main() which at least tries to tidy up a bit afterwards.
(Finally, fixed a small bug in testing the return value of waitpid(),
which only showed up once we didn't exit(0) after the first wait.
Ahem.)
Now it actually logs all its requests and responses, the fingerprints
of keys mentioned in all messages, and so on.
I've also added the -v option, which causes Pageant in any mode to
direct that logging information to standard error. In --debug mode,
however, the logging output goes to standard output instead (because
when debugging, that information changes from a side effect to the
thing you actually wanted in the first place :-).
An internal tweak: the logging functions now take a va_list rather
than an actual variadic argument list, so that I can pass it through
several functions.
LIFE_EXEC is already dealt with, and I forgot to take out the comment
reminding me to do it, ahem.
The LIFE_PARENT mentioned in the same comment was an idea I had but
couldn't think of a way to make it work: if you have a terminal-only
shell session in which you want to eval $(ssh-agent), then it's
annoying and fragile to have to remember to kill the agent when you
log out, so you'd like it to automatically tie its lifetime to that of
the shell from which you invoked it. Unfortunately, I don't know of
any way to do that without race conditions. (E.g. if only pageant
didn't fork, then it could poll its own ppid until it became 1 - but
the child process would find it was 1 already.)
This is much more like ssh-agent than the Windows version is - it sets
SSH_AUTH_SOCK and SSH_AGENT_PID as its means of being found by other
processes, rather than Windows Pageant's approach of establishing
itself in a well-known location. But the actual agent code is the same
as Windows Pageant.
For the moment, this is an experimental utility and I don't expect it
to be useful to many people; its immediate use to me is that it
provides a way to test and debug the agent code on Unix, and also to
use the agent interface as a convenient way to exercise public key
functions I want to debug. And of course it means I can be constantly
using and testing my own code, on whatever platform I happen to be
using. In the further future, I have a list of possible features I
might add to it, but I don't know which ones I'll decide are
worthwhile.
One feature I've already put in is a wider range of lifetime
management options than ssh-agent: the -X mode causes Pageant to make
a connection to your X display, and automatically terminate when that
connection closes, so that it has the same lifetime as your X session
without having to do the cumbersome trick of exec()ing the subsequent
session-management process.
It tries to use the local username as the remote username if it has no
better ideas, but the presence of Default Settings would defeat this,
even if it had no username set. Reported by Jonathan Amery.
If we use getaddrinfo to translate the source IP address into a
sockaddr, then we need to freeaddrinfo the returned data later. Patch
due to Tim Kosse.
I don't think anyone has ever actually called it that, colloquially
_or_ formally, and if anyone ever did (in a bug report, say) I'd
probably have to stop and think to work out what they meant. It's
universally called Plink, and should be officially so as well :-)
I'm not actually sure why we've always had back ends notify ldisc of
changes to echo/edit settings by giving ldisc_send(ldisc,NULL,0,0) a
special meaning, instead of by having a separate dedicated notify
function with its own prototype and parameter set. Coverity's recent
observation that the two kinds of call don't even have the same
requirements on the ldisc (particularly, whether ldisc->term can be
NULL) makes me realise that it's really high time I separated the two
conceptually different operations into actually different functions.
While I'm here, I've renamed the confusing ldisc_update() function
which that special operation ends up feeding to, because it's not
actually a function applying to an ldisc - it applies to a front end.
So ldisc_send(ldisc,NULL,0,0) is now ldisc_echoedit_update(ldisc), and
that in turn figures out the current echo/edit settings before passing
them on to frontend_echoedit_update(). I think that should be clearer.
I had initially assumed that, since all of a user's per-connection
subdirectories live inside a top-level putty-connshare.$USER directory
that's not accessible to anyone else, there would be no need to
obfuscate the names of the internal directories for privacy, because
nobody would be able to look at them anyway.
Unfortunately, that's not true: 'netstat -ax' run by any user will
show up the full pathnames of Unix-domain sockets, including pathname
components that you wouldn't have had the access to go and look at
directly. So the Unix connection sharing socket names do need to be
obfuscated after all.
Since Unix doesn't have Windows's CryptProtectMemory, we have to do
this manually, by creating a file of random salt data inside the
top-level putty-connshare directory (if there isn't one there already)
and then hashing that salt with the "user@host" connection identifier
to get the socket directory name. What a pain.
[originally from svn r10222]
I'm about to add a list box which expects to contain some very long
but uninformative strings, and which is also quite vertically squashed
so there's not much room for a horizontal scroll bar to appear in it.
So here's an option in the list box specification structure which
causes the constructed GTKTreeView to use the 'ellipsize' option for
all its cell renderers, i.e. too-long strings are truncated with an
ellipsis.
Windows needs no change, because its list boxes already work this way.
[originally from svn r10219]
Robert de Bath points out that failure to remove the timer whose
callback returned FALSE may not have been the cause of runaway timer
explosion; another possibility is that a function called from
timer_trigger()'s call to run_timers() has already set a timer up by
the time run_timers() returns, and then we set another one up on top
of it. Fix that too.
[originally from svn r10206]
Mihkel Ader reports that on that system, timers apparently aren't
getting auto-destroyed when timer_trigger returns FALSE, so the change
in r10181 has caused GTK PuTTY to gradually allocate more and more
timers and consume more and more CPU as they all keep firing.
As far as I can see, this must surely be a bug in GTK 2 (the docs say
that timers _are_ auto-destroyed when their callback returns false),
and it doesn't seem to happen for me with GTK 2.4.23 on Ubuntu 14.04.
However, I'll try to work around it by _explicitly_ destroying each
old timer before we zero out the variable containing its id.
[originally from svn r10202]
[r10181 == e4c4bd2092]
Timer objects evaporate when our timer_trigger callback is called, and
therefore we should not remember their ids beyond that time and
attempt to cancel them later. Previous versions of GTK silently
ignored us doing that, but upgrading to Ubuntu Trusty has given me a
version of GTK that complains about it, so let's stop doing it.
[originally from svn r10181]
Previously, 'configure' and its assorted machinery lived in the 'unix'
subdir, because that seemed like a clean place to keep it given that
all the other per-platform Makefiles live in their platform
directories. However, this never sat all that happily with autotools,
and even less so now that it likes to have object file pathnames
parallel source file pathnames: if you have Makefile.am refer to
source files outside its subdir as "../terminal.c" and enable
subdir-objects then any out-of-tree build calls the corresponding
object file "../terminal.o" and so your build products mostly end up
at the directory above your build dir! And as of autotools 1.14 my
previous compensatory bodge of prefixing every source file path in
Makefile.am with "$(srcdir)" has stopped working too.
So I'm giving in to necessity, and changing policy by moving the
configure machinery up to the top level of the source tree where
autotools will be less confused by it. This should not be taken as any
indication of the primacy of the Unix port, only of the recalcitrance
of autotools.
Whereas before we had a trivial script called 'configure' at the top
level that invoked unix/configure to effectively do an 'out-of-tree
build' (for make purposes) at the top level of the source tree, we now
have a similar script in unix/configure. So this _should_ make very
little difference: people who were previously running configure from
the top level should still be able to, and likewise people who were
running it from the unix subdir.
[originally from svn r10141]
I had somehow missed this completely out of the GTK mouse-button
handling and never noticed until now!
Of course, like any other mouse action, if you want it to be handled
locally rather than passed through then you can hold down Shift.
[originally from svn r10139]
One of my changes in uxnet.c was outside the NO_IPV6 ifdef, and broke
compilation in the normal mode. Revert all changes in that file and
replace with a reference to the 'step' parameter in the no-IPv6
version of the SOCKADDR_FAMILY macro, so that those warnings are
squelched anyway.
[originally from svn r10136]
[r10135 == e00a004e64]
A user pointed out that 'family' was uninitialised in config.c, and
when I tried test-building with -DNO_IPV6 (and the usual -Werror, of
course) some unused variables showed up in uxnet.c too.
[originally from svn r10135]
Both GUI PuTTY front ends have a piece of logic whereby a string is
interpreted as host:port if there's _one_ colon in it, but if there's
more than one colon then it's assumed to be an IPv6 literal with no
trailing port number. This permits the PuTTY command line to take
strings such as 'host', 'host:22' or '[::1]:22', but also cope with a
bare v6 literal such as '::1'.
This logic is also required in the two Plink front ends and in the
processing of CONF_loghost for host key indexing in ssh.c, but was
missing in all those places. Add it.
[originally from svn r10121]
I've gone through everywhere we handle host names / addresses (on
command lines, in PuTTY config, in port forwarding, in X display
names, in host key storage...) and tried to make them handle IPv6
literals sensibly, by using the host_str* functions I introduced in my
previous commit. Generally it's now OK to use a bracketed IPv6 literal
anywhere a hostname might have been valid; in a few cases where no
ambiguity exists (e.g. no :port suffix is permitted anyway)
unbracketed IPv6 literals are also acceptable.
[originally from svn r10120]
I found last week that when a local proxy process terminated
unexpectedly, Unix PuTTY went into a tight loop calling quit
functions, because if idle_toplevel_callback_func is called from
inside a subsidiary gtk_main then it will schedule a quit function and
_not_ disable itself, so that that quit function keeps being
rescheduled on subsequent calls.
To fix, I've tried to make the whole handling of idle and quit
functions more sensibly robust: we keep our own boolean flag
indicating whether each of our functions has already been scheduled
with GTK, and if so, we don't schedule the same one again. Also, when
idle_toplevel_callback_func schedules a quit function, it should
unschedule itself since it's now done everything it can until a
gtk_main instance quits.
[originally from svn r10100]
The one in Ubuntu 10.04 doesn't know what AM_PROG_AR means, so
configure.ac was broken in r10053 when fixing compatibility with later
versions; you can't win...
[originally from svn r10086]
[r10053 == 2d9cc79d53]
I've enabled gcc's format-string checking on dupprintf, by declaring
it in misc.h to have the appropriate GNU-specific attribute. This
pointed out a selection of warnings, which I've fixed.
[originally from svn r10084]
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
It was only actually used in X11 and port forwarding, to find internal
state structures given only the Socket that ssh.c held. So now that
that lookup has been reworked to be the sensible way round,
private_ptr is no longer used for anything and can be removed.
[originally from svn r10075]
This prevents embarrassing mess-ups involving getting back a Socket
which has mostly been memset to 0 but contains an error message,
sk_close()ing it to free the memory, and finding that standard input
has been closed as a side effect.
[originally from svn r10073]
There are two new functions: one to construct a SockAddr wrapping a
Unix socket pathname (which can also be used as the destination for
new_connection), and one to establish a new listening Unix-domain
socket.
[originally from svn r10072]
The mechanism for constructing a new connection-type Socket when a
listening one receives an incoming connection previously worked by
passing a platform-specific 'OSSocket' type to the plug_accepting
function, which would then call sk_register to wrap it with a proper
Socket instance. This is less flexible than ideal, because it presumes
that only one kind of OS object might ever need to be turned into a
Socket. So I've replaced OSSocket throughout the code base with a pair
of parameters consisting of a function pointer and a context such that
passing the latter to the former returns the appropriate Socket; this
will permit different classes of listening Socket to pass different
function pointers.
In deference to the reality that OSSockets tend to be small integers
or pointer-sized OS handles, I've made the context parameter an
int/pointer union that can hold either of those directly, rather than
the usual approach of making it a plain 'void *' and requiring a
context structure to be dynamically allocated every time.
[originally from svn r10068]
Automake now insists that we run AM_PROG_AR if we're going to build a
library, and AM_PROG_CC_C_O if we're going to build anything with
extra compile options. Those extra macros seem harmless in previous
versions of automake.
[originally from svn r10053]
Unix GUI programs should not say 'Fatal Error' in the message box
title, and Plink should not destroy its logging context as a side
effect of printing a non-fatal error. Both appear to have been due to
inattentive cut and paste from the pre-existing fatal error functions.
[originally from svn r10044]
This change attempts to reinstate as a universal property something
which was sporadically true of the ad-hockery that came before
toplevel callbacks: that if there's a _very long_ queue of things to
be done through the callback mechanism, the doing of them will be
interleaved with re-checks of other event sources, which might (e.g.)
cause a flag to be set which makes the next callback decide not to do
anything after all.
[originally from svn r10040]
Again, I've removed the special-purpose ad-hockery from the assorted
front end message loops that dealt with deferred handling of socket
errors, and instead uxnet.c and winnet.c arrange that for themselves
by calling the new general top-level callback mechanism.
[originally from svn r10023]
Instead of having a special GTK idle function for dealing with session
closing, I now use the new top-level callback mechanism which is
slightly simpler for calling a one-off function.
Also in this commit, I've arranged for connection_fatal to queue a
call to the same session close function after displaying the message
box, with the effect that now all the same processing takes place no
matter whether the session closes cleanly or uncleanly - e.g. the SSH
specials submenu is cleaned out, as it should be.
[originally from svn r10022]
I've removed the ad-hoc front-end bodgery in the Windows and GTK ports
to arrange for term_paste to be called at the right moments, and
instead, terminal.c itself deals with knowing when to send the next
chunk of pasted data using a combination of timers and the new
top-level callback mechanism.
As a happy side effect, it's now all in one place so I can actually
understand what it's doing! It turns out that what all that confusing
code was up to is: send a line of pasted data, and delay sending the
next line until either a CR or LF is returned from the server
(typically indicating that the pasted text has been received and
echoed) or 450ms elapse, whichever comes first.
[originally from svn r10020]
This is a little like schedule_timer, in that the callback you provide
will be run from the top-level message loop of whatever application
you're in; but unlike the timer mechanism, it will happen
_immediately_.
The aim is to provide a general way to avoid re-entrance of code, in
cases where just _doing_ the thing you want done is liable to trigger
a confusing recursive call to the function in which you came to the
decision to do it; instead, you just request a top-level callback at
the message loop's earliest convenience, and do it then.
[originally from svn r10019]
parallels a similar mechanism in winnet.c and came over by copy and
paste, but is pointless in the Unix networking API.
On Windows, if you're using a mechanism such as WSAAsyncSelect which
delivers readability notifications as messages rather than return
values from a system call, you only get notified that a socket is
readable once - it remembers that it's told you, and doesn't tell you
again until after you've done a read. So in the case where we
intentionally stop reading from a socket because our local buffer is
full, and later want to start reading again, we do a read from the
socket with MSG_PEEK set, and that clears Windows's flag and tells it
to start sending us readability notifications again.
On Unix, select() and friends didn't do anything so strange in the
first place, so the whole mechanism is unnecessary.
[originally from svn r9951]
immediately after conf_deserialise in the Duplicate Session receiver,
whereas I should have put it after the subsequent loop that extracts
the pty argv if any.
[originally from svn r9943]
[r9919 == ea301bdd9b]
that the user really ought to know but that are not actually fatal to
continued operation of PuTTY or a single network connection.
[originally from svn r9932]
of the GET_32BIT macros and then used as length fields. Missing bounds
checks against zero have been added, and also I've introduced a helper
function toint() which casts from unsigned to int in such a way as to
avoid C undefined behaviour, since I'm not sure I trust compilers any
more to do the obviously sensible thing.
[originally from svn r9918]
code, which would have coped badly if ever asked to select the first
font in the list at a size smaller than it supported. Luckily the
first font tended to be one of the X numeric aliases (e.g. 10x20)
which was stored with size zero, so this probably didn't actually come
up for anyone, but better safe than sorry.
[originally from svn r9910]
segfaults if a PuTTY or pterm did not close on exit and then you
either typed something via input_method_commit_event or changed the
line editing or echo settings.
[originally from svn r9908]
where the GTK1 detection function AM_PATH_GTK hasn't been provided by
/usr/share/aclocal/gtk.m4 or equivalent.
(Systems without gtk.m4 are becoming more common, but on the other
hand I know at least one person is still using GTK 1 PuTTY since the
0.62 release.)
[originally from svn r9868]
character set configuration to UTF-8, on both Windows and Unix, and
reorganise the dropdown lists in the Translation menu so that UTF-8
appears at the top (and Unix's odd "use font encoding" is relegated to
the bottom of the list like the special-purpose oddity it is).
[originally from svn r9843]
privileges just before dying of a fatal signal. I'm not sure what I
intended it for in the first place; it certainly isn't doing its job
properly (no setgid), it's causing compiler warnings due to not
checking the setuid return code, and we can't think of any useful
purpose for it.
[originally from svn r9766]
and returns its error message as a string, instead of actually
printing it on standard error and exiting. Now we can preserve the
previous error behaviour when we get a nonexistent font name at
startup time, but no longer rudely terminate in mid-session if the
user configures a bogus font name in Change Settings.
[originally from svn r9745]
pty_utmp_helper_pipe _and_ the close of it if we're not going to write
should be conditionalised on the pipe existing, rather than just the
former!
[originally from svn r9729]
open("/dev/ptmx"), where the former is available. Improves
portability, since at least one OS (OpenBSD) supports the POSIX pty
functions but does it via an underlying mechanism which doesn't
involving having a /dev/ptmx.
[originally from svn r9728]
OS doesn't automatically assume it.
(It would seem faintly weird to me - surely opening the master end of
a given pty is a fairly good indication that you're _not_ a process
running inside it which wants to have it available as /dev/tty! But
you never know...)
[originally from svn r9727]
localhost connections, and also enable X forwarding in such a way that
it will attempt to connect to a Unix-domain X server socket, an
assertion will fail when proxy_for_destination() tries to call
sk_getaddr(). Fix by ensuring that Unix-domain sockets are _never_
proxied, since they fundamentally can't be.
[originally from svn r9688]
Well, at least across all command-line tools on both Windows and Unix,
and the GTK apps on Unix too. The Windows GUI apps fundamentally can't
write to standard output and it doesn't seem sensible to use message
boxes for these purposes :-)
[originally from svn r9673]
First, make absolute times unsigned. This means that it's safe to
depend on their overflow behaviour (which is undefined for signed
integers). This requires a little extra care in handling comparisons,
but I think I've correctly adjusted them all.
Second, functions registered with schedule_timer() are guaranteed to be
called with precisely the time that was returned by schedule_timer().
Thus, it's only necessary to check these values for equality rather than
doing risky range checks, so do that.
The timing code still does lots that's undefined, unnecessary, or just
wrong, but this is a good start.
[originally from svn r9667]
Unconditionally override the configured terminal size with the one
from stdin if it's available. This avoids the silliness whereby if
Default Settings had a terminal size set, Plink used this and thus
caused the server to use the wrong size.
[originally from svn r9624]
zero but does it in such a way that over-clever compilers hopefully
won't helpfully optimise the call away if you do it just before
freeing something or letting it go out of scope. Use this for
(hopefully) every memset whose job is to destroy sensitive data that
might otherwise be left lying around in the process's memory.
[originally from svn r9586]
having just noticed that Makefile.gtk had it and this one doesn't. (Of
course, this being autoconf, we can easily enough make it conditional
on the compiler actually being gcc.)
[originally from svn r9583]
and the argument list contains only one string, try again by passing
that single string to "$SHELL -c" to be parsed as a shell command.
This matches xterm's behaviour (as of xterm 261, at least), and means
in practice that users can do _either_ of 'pterm -e some command' and
'pterm -e "some command"'.
(A quick survey suggests that the majority of X terminal programs agree
with pterm's old behaviour of only supporting '-e some command',
except that gnome-terminal only supports the other behaviour and xterm
supports both. With that disagreement, I think supporting both is
probably the sensible thing.)
[originally from svn r9575]
piece of keyboard handling: if Num Lock is on, numeric keypad keys are
eaten by the IM, so we must avoid passing them to the IM in the first
place if we're in any non-default numeric keypad mode (application or
Nethack).
This is a grubby way to do it, but the more obvious approach of just
moving the Nethack and app-keypad if statements up to above the IM
call doesn't work because those statements depend on the generic
Alt-prefix handling that happens just _below_ the IM call. So instead
I just repeat the list of keystrokes and modes in an if statement
conditionalising the IM call.
[originally from svn r9573]
[r9567 == 7fc8db15b2]
a GtkIMMulticontext and having that filter most keypresses. I think
I've got this right so that it doesn't break any previous deliberate
keyboard-handling behaviour that's now _after_ the 'if (filter
keypress) return' statement.
[originally from svn r9567]
The previous platform-dependent ifdefs, switching between a system
which tried to cope with spurious callbacks (which I'd observed on
Windows) and one which tried to cope with system clock jumps (which
can happen on Unix, if you use gettimeofday) have been completely
removed, and replaced with a much simpler approach which just copes
with system clock jumps by triggering any timers immediately.
None of the resulting effects should be catastrophic (the worst thing
might be the waste of CPU in a spurious rekey, but as long as the
system clock isn't jumping around _all_ the time that's hardly
critical) and in any case the Unix port has had a long-standing oddity
involving occasional lockups if pterm or PuTTY runs for too long,
which hopefully this should replace with a much less bad failure mode.
And the code is much simpler, which is not to be sneezed at.
[originally from svn r9528]
will not even initialise sbstring[0], so we shouldn't even look at it
let alone depend on it to tell us the desired character was absent.
[originally from svn r9465]
logevent(), which temporarily turn off the raw mode we've put stderr
into, so that they don't get called if the log_eventlog() call between
them is not _actually_ going to write to stderr.
Fixes a bug in which, if you define a Unix PuTTY saved session which
uses 'plink -nc' as a local proxy command and then run PuTTY
backgrounded from the shell with that session loaded, the subprocess
Plink would get SIGTTOU when it tried to muck about with stderr and
the whole thing would grind to a halt. I'm prepared to consider that
acceptable if Plink _really_ wants to write on standard error, but if
it doesn't, it should just carry on working in the background!
[originally from svn r9462]
duplicate the strings they pass to gtk_entry_set_text. I was already
doing that in dlg_editbox_set, but forgot to add the same code when I
revamped FontSpec and Filename to contain dynamically allocated
strings (r9314 and r9316 respectively). This fixes a bug where, on
some versions of GTK (but apparently not up-to-date versions), loading
a saved session causes gibberish to appear in file-selector edit boxes
accompanied by a valgrind error.
[originally from svn r9456]
[r9314 == 9c75fe9a3f]
[r9316 == 62cbc7dc0b]
deprecated g_strcasecmp (since all the strings being compared are
parts of XLFDs and won't be in interesting character sets anyway).
[originally from svn r9376]
remembered to do before! Also some related fixes, such as that after
we do so we should immediately stop selecting on the socket in
question.
[originally from svn r9363]
of local sockets and pipes all open at once, and if one of them is
uncleanly closed from the remote end we don't want the whole
application to die - we want to close that socket's SSH channel and
continue with the rest of the run.
[originally from svn r9359]
allocated type.
The main reason for this is to stop it from taking up a fixed large
amount of space in every 'struct value' subunion in conf.c, although
that makes little difference so far because Filename is still doing
the same thing (and is therefore next on my list). However, the
removal of its arbitrary length limit is not to be sneezed at.
[originally from svn r9314]
because (a) under that circumstance we won't be writing to utmp
anyway, and (b) if we aren't setuid, then we won't have created the
pty at the point we fork, so even if our subprocess _could_ have
written to utmp it wouldn't have done it right!
Spotted by valgrind (triggering on the access beyond the end of the
ttyname string in setup_utmp, clueing me in to it having been empty).
[originally from svn r9309]
hadn't previously noticed, but Pango was helpfully re-reversing text
that PuTTY's own bidi module had already reversed, leading to Arabic
text being wrongly displayed and also total chaos when you move the
cursor over it or try to cut and paste it.
[originally from svn r9294]
by introducing a wrapper around an individual unifont which falls back
to Pango (which already has built-in fallback) in the case where the
selected font doesn't support the glyph in question.
The wrapper itself is a (vestigial) subclass of unifont, to minimise
disturbance at the call sites.
[originally from svn r9293]
individual font implementation as wchar_t, rather than having to be
converted by the client into the appropriate MBCS/SBCS.
This also means I can remove 'real_charset' from the public-facing
contents of the unifont structure.
[originally from svn r9292]
