With the new larger fixed-group methods, it's less clearly always the
right answer. (Really it seems more sensible to use ECDH over any of
the integer DH, these days.)
Also, reword other kex descriptions a bit.
If Halibut is not available to build the docs, but on the other hand
pre-built man pages already exist (e.g. because you unpacked a source
zip file with them already provided), then docs/CMakeLists.txt creates
a set of build rules that copy the pre-built man pages from the source
directory to the build directory.
However, if the source and build directories are the _same_, this
creates a set of cyclic dependencies, i.e. files which depend directly
on themselves. Some build tools (in particular 'ninja') will report
this as an error.
In that situation, the simple fix is to leave off the build rules
completely: if the man pages are already where the build will want
them to end up, there need not be any build rule to do anything about
them.
In recent months I've had two requests from different people to build
support into PuTTY for automatically handling complicated third-party
auth protocols layered on top of keyboard-interactive - the kind of
thing where you're asked to enter some auth response, and you have to
refer to some external source like a web server to find out what the
right response _is_, which is a pain to do by hand, so you'd prefer it
to be automated in the SSH client.
That seems like a reasonable thing for an end user to want, but I
didn't think it was a good idea to build support for specific
protocols of that kind directly into PuTTY, where there would no doubt
be an ever-lengthening list, and maintenance needed on all of them.
So instead, in collaboration with one of my correspondents, I've
designed and implemented a protocol to be spoken between PuTTY and a
plugin running as a subprocess. The plugin can opt to handle the
keyboard-interactive authentication loop on behalf of the user, in
which case PuTTY passes on all the INFO_REQUEST packets to it, and
lets it make up responses. It can also ask questions of the user if
necessary.
The protocol spec is provided in a documentation appendix. The entire
configuration for the end user consists of providing a full command
line to use as the subprocess.
In the contrib directory I've provided an example plugin written in
Python. It gives a set of fixed responses suitable for getting through
Uppity's made-up k-i system, because that was a reasonable thing I
already had lying around to test against. But it also provides example
code that someone else could pick up and insert their own live
response-provider into the middle of, assuming they were happy with it
being in Python.
We've occasionally had reports of SSH servers disconnecting as soon as
they receive PuTTY's KEXINIT. I think all such reports have involved
the kind of simple ROM-based SSH server software you find in small
embedded devices.
I've never been able to prove it, but I've always suspected that one
possible cause of this is simply that PuTTY's KEXINIT is _too long_,
either in number of algorithms listed or in total length (especially
given all the ones that end in @very.long.domain.name suffixes).
If I'm right about either of those being the cause, then it's just
become even more likely to happen, because of all the extra
Diffie-Hellman groups and GSSAPI algorithms we just threw into our
already-long list in the previous few commits.
A workaround I've had in mind for ages is to wait for the server's
KEXINIT, and then filter our own down to just the algorithms the
server also mentioned. Then our KEXINIT is no longer than that of the
server, and hence, presumably fits in whatever buffer it has. So I've
implemented that workaround, in anticipation of it being needed in the
near future.
(Well ... it's not _quite_ true that our KEXINIT is at most the same
length as the server. In fact I had to leave in one KEXINIT item that
won't match anything in the server's list, namely "ext-info-c" which
gates access to SHA-2 based RSA. So if we turn out to support
absolutely everything on all the server's lists, then our KEXINIT
would be a few bytes longer than the server's, even with this
workaround. But that would only cause trouble if the server's outgoing
KEXINIT was skating very close to whatever buffer size it has for the
incoming one, and I'm guessing that's not very likely.)
((Another possible cause of this kind of disconnection would be a
server that simply objects to seeing any KEXINIT string it doesn't
know how to speak. But _surely_ no such server would have survived
initial testing against any full-featured client at all!))
I recently noticed a mysterious delay at connection startup while
using an SSH jump host, and investigated it in case it was a bug in
the new jump host code that ought to be fixed before 0.77 goes out.
strace showed that at the time of the delay PuTTY was doing a DNS
lookup for the destination host, which was hanging due to the
authoritative DNS server in question not being reachable. But that was
odd, because I'd configured it to leave DNS lookup to the proxy,
anticipating exactly that problem.
But on closer investigation, the _proxy_ code was doing exactly what
I'd told it. The DNS lookup was coming from somewhere else: namely, an
(unsuccessful) attempt to set up a GSSAPI context. The GSSAPI library
had called gethostbyname, completely separately from PuTTY's own use
of DNS.
Simple workaround for me: turn off GSSAPI, which doesn't work for that
particular SSH connection anyway, and there's no point spending 30
seconds faffing just to find that out.
But also, if that puzzled me, it's worth documenting!
There's now a command-line option to make Pageant open an AF_UNIX
socket at a pathname of your choice. This allows it to act as an SSH
agent for any client program willing to use a WinSock AF_UNIX socket.
In particular, this allows WSL 1 processes to talk directly to Windows
Pageant without needing any intermediate process, because the AF_UNIX
sockets in the WSL 1 world interoperate with WinSock's ones.
(However, not WSL 2, which isn't very surprising.)
I tried setting this up on a different Windows machine today and had
some slightly different experiences. I found that in at least some
situations the command 'Include c:\...\pageant.conf' will cause
OpenSSH to emit a log message saying it's trying to open the file
'~/.ssh/c:\...\pageant.conf', which it then doesn't find. But 'Include
pageant.conf' works, because that's interpreted relative to the .ssh
directory that it's already found.
(I don't know why this happened on one Windows machine and not
another, since I only have a sample size of two. But an obvious guess
would be a bug fix in the Windows OpenSSH port, present in the version
on one of the machines I tried, and not in the other. Certainly that
failure mode looks to me like 'apply Unix instead of Windows rules to
decide what's an absolute pathname'.)
Also, clarified that all of this only works with the version of
OpenSSH that's available as a Windows optional feature, and not with
the MSYS-based one that ships with Windows git.
When I was writing the documentation for the new command-line options,
I wondered why there was an existing section for the corresponding GUI
setting for each option I'd added except strong primes. Now I've found
it: strong primes are discussed in the same section as prime-
generation methods. So I can replace the second explanation with a
cross-reference.
Those were forbidden so that we could still compile on pre-C99 C
compilers. But now we expect C99 everywhere (or at least most of it,
excluding the parts that MSVC never implemented and C11 made
optional), so // comments aren't forbidden any more.
Most of the comments in this code base are still old-style, but that's
now a matter of stylistic consistency rather than hard requirement.
Correcting a source file name in the docs just now reminded me that
I've seen a lot of outdated source file names elsewhere in the code,
due to all the reorganisation since we moved to cmake. Here's a giant
pass of trying to make them all accurate again.
It's been so long since Windows Plink kept its stdio subthreads in its
own main source file that I'd forgotten it had ever done so! They've
lived in a separate module for managing Windows HANDLE-based I/O for
ages. That module has recently changed its filename, but this piece of
documentation was so out of date that the old filename wasn't in there
- it was still mentioning the filename _before_ that.
Jacob reported that on Debian buster, the command sequence
cmake $srcdir
cmake --build .
cmake --build . --target doc
would fail at the third step, with the make error "No rule to make
target 'doc/cmake_version.but', needed by 'doc/html/index.html'".
That seems odd, because the file ${VERSION_BUT} _was_ declared as a
dependency of the rule that builds doc/html/*.html, and _cmake_ knew
what rule built it (namely the custom target 'cmake_version_but'). I
suspect this is a bug in cmake 3.13, because the same command sequence
works fine with cmake 3.20.
However, it's possible to work around, by means of adding the cmake
_target name_ to the dependencies for any rule that uses that file,
instead of relying on it to map the output _file_ name to that target.
While I'm at it, I've transformed the rules that build copy.but and
licence.but in the same way, turning those too into custom targets
instead of custom commands (I've found that the former are more
generally reliable across a range of cmake versions), and including
the target names themselves as dependencies.
After a discussion with a user recently, I investigated the Windows
native ssh.exe, and found it uses a Windows named pipe to talk to its
ssh-agent, in exactly the same way Pageant does. So if you tell
ssh.exe where to find Pageant's pipe, it can talk directly to Pageant,
and then you can have just one SSH agent.
The slight problem is that Pageant's pipe name is not stable. It's
generated using the same system as connection-sharing pipe names, and
contains a hex hash value whose preimage was fed through
CryptProtectData. And the problem with _that_ is that CryptProtectData
apparently reinitialises its seed between login sessions (though it's
stable within a login session), which I hadn't fully realised when I
reused the same pipe-name construction code.
One possibility, of course, would be to change Pageant so that it uses
a fixed pipe name. But after a bit of thought, I think I actually like
this feature, because the Windows named pipe namespace isn't
segregated into areas writable by only particular users, so anyone
using that namespace on a multiuser Windows box is potentially
vulnerable to someone else squatting on the name you wanted to use.
Using this system makes that harder, because the squatter won't be
able to predict what the name is going to be! (Unless you shut down
Pageant and start it up again within one login session - but there's
only so much we can do. And squatting is at most a DoS, because
PuTTY's named-pipe client code checks ownership of the other end of
the pipe in all cases.)
So instead I've gone for a different approach. Windows Pageant now
supports an extra command-line option to write out a snippet of
OpenSSH config file format on startup, containing an 'IdentityAgent'
directive which points at the location of its named pipe. So you can
use the 'Include' directive in your main .ssh/config to include this
extra snippet, and then ssh.exe invocations will be able to find
wherever the current Pageant has put its pipe.
This imports the following options from command-line PuTTYgen, which
all correspond to controls in Windows PuTTYgen's GUI, and let you set
the GUI controls to initial values of your choice:
-t <key type>
-b <bits>
-E <fingerprint type>
--primes <prime gen policy>
--strong-rsa
--ppk-param <KDF parameters or PPK version etc>
The idea is that if someone generates a lot of keys and has standard
non-default preferences, they can make a shortcut that passes those
preferences on the command line.
This update covers several recently added features: SSH proxying, HTTP
Digest proxy auth, and interactive prompting for proxy auth in general.
Also, downplayed the use of 'plink -nc' as a Local-type proxy command.
It still works, but it's no longer the recommended way of tunnelling
SSH over SSH, so there's no need to explain it quite so
enthusiastically.
I have _no_ idea how I managed to leave this out of the list of
examples when I first wrote this man page. It should have been the
very first one I thought of, since Cygwin was the platform I wrote
cygtermd for, and one of psusan's primary purposes was to be a
productised and improved replacement for cygtermd!
Oh well, better late than never.
After this change, the cmake setup now works even on Debian stretch
(oldoldstable), which runs cmake 3.7.
In order to support a version that early I had to:
- write a fallback implementation of 'add_compile_definitions' for
older cmakes, which is easy, because add_compile_definitions(FOO)
is basically just add_compile_options(-DFOO)
- stop using list(TRANSFORM) and string(JOIN), of which I had one
case each, and they were easily replaced with simple foreach loops
- stop putting OBJECT libraries in the target_link_libraries command
for executable targets, in favour of adding $<TARGET_OBJECTS:foo>
to the main sources list for the same target. That matches what I
do with library targets, so it's probably more sensible anyway.
I tried going back by another Debian release and getting this cmake
setup to work on jessie, but that runs CMake 3.0.1, and in _that_
version of cmake the target_sources command is missing, and I didn't
find any alternative way to add extra sources to a target after having
first declared it. Reorganising to cope with _that_ omission would be
too much upheaval without a very good reason.
